This document lists various drawer accessories and dividers from Artromick International, including narcotics boxes, drawer divider kits, sub-dividers, and a sliding divider. Each listing provides the product name, part number, and contact information.
We are a trusted Manufacturer and Supplier of Material Handling Equipment. These products are reckoned in the market for salient features such as durability, dimensional accuracy and corrosion resistance.
We are a trusted Manufacturer and Supplier of Material Handling Equipment. These products are reckoned in the market for salient features such as durability, dimensional accuracy and corrosion resistance.
For: MTZ 800/900/1000/1200 Series
▪ Quick mounting on the tractor.
▪ Self leveling feature.
▪ Possibility to attach a wide range of accessories.
▪ SMS / EURO type quick attack.
▪ Control by tractor levers or by “Joystick” with third service function (optional).
Denmark spider mould installation 10 ton worm gear jack lift pulling manual operation.
Individually use 10 ton worm gear jack lift, manual operation with 8” (200mm) cast iron hand wheel, with fem with female spherical rod end for 5 ton load applications, pictures as follows. No guided for jacks, use anti-rotation device keyed screw worm gear jack lift pulling for spider mould installation in Denmark.
Model: JT-10T-UK-200-L-IV-C-PP/HW/SN/RE
* 10t screw jacks, max. dynamic load 6.4 tons
* Upright mounting, keyed screw type
* 200mm stroke with low speed ratio 1/32, 0.25mm per turn of hand wheel
* Screw top with thread end M30x2 matching PHS 30 female spherical rod end
* Double input worm shaft
* Accessories: protective tube, 8″ cast iron hand wheel, stop nut, Phs30 rod end.
Timothy Holding Co., Ltd.was founded in 1993. It has been specialized in producing universal joint shafts (also called cardan shaft or universal spindle) for more than twenty years.
http://www.timothyholding.com/
The motor driven, Greyhound Electronic Crimper solves these problems and crimps hundreds of vials on a single charge with just the touch of a button.
The electronic Crimpers and Decappers are hand held tools for attaching or removing aluminium seals on 8mm, 11mm, 13mm and 20mm vials. A single press of the button both closes the crimping jaws to attach the seal and opens them to release the vials. You can also remove a seal with a single press of the operation button on the decapper version.
The tools are compatible with standard aluminium seals, pressure release seals, tin plated seals, bi-metallic two piece seals and ‘flip-off’ seals. (Select the proper tool according to the finish size of the vials).
The Greyhound High Power Crimping Tool is designed with interchangeable jaws, so you only need one tool for various functions in your laboratory. The jaw sets are available as crimpers and decappers which fit standard lab vial seals with aluminium or two-part aluminium/steel caps. The tools are ergonomically designed to reduce strain and arm injury associated with many manual crimping tools.
Jaw sets are available in 8mm (crimper only), 11mm, 13mm, and 20mm cap sizes, including ‘flip-off’ caps in 13mm and 20mm sizes.
Switching Jaw Sets: Jaw sets are easy to interchange. Simply insert the jaw set into the bushing at the bottom of the tool. Push up and twist until the set locks into position. To remove, simply push the outside button and rotate.
Timothy Holding Co., Ltd.was founded in 1993. It has been specialized in producing universal joint shafts (also called cardan shaft or universal spindle) for more than twenty years.
http://www.timothyholding.com/
For: MTZ 800/900/1000/1200 Series
▪ Quick mounting on the tractor.
▪ Self leveling feature.
▪ Possibility to attach a wide range of accessories.
▪ SMS / EURO type quick attack.
▪ Control by tractor levers or by “Joystick” with third service function (optional).
Denmark spider mould installation 10 ton worm gear jack lift pulling manual operation.
Individually use 10 ton worm gear jack lift, manual operation with 8” (200mm) cast iron hand wheel, with fem with female spherical rod end for 5 ton load applications, pictures as follows. No guided for jacks, use anti-rotation device keyed screw worm gear jack lift pulling for spider mould installation in Denmark.
Model: JT-10T-UK-200-L-IV-C-PP/HW/SN/RE
* 10t screw jacks, max. dynamic load 6.4 tons
* Upright mounting, keyed screw type
* 200mm stroke with low speed ratio 1/32, 0.25mm per turn of hand wheel
* Screw top with thread end M30x2 matching PHS 30 female spherical rod end
* Double input worm shaft
* Accessories: protective tube, 8″ cast iron hand wheel, stop nut, Phs30 rod end.
Timothy Holding Co., Ltd.was founded in 1993. It has been specialized in producing universal joint shafts (also called cardan shaft or universal spindle) for more than twenty years.
http://www.timothyholding.com/
The motor driven, Greyhound Electronic Crimper solves these problems and crimps hundreds of vials on a single charge with just the touch of a button.
The electronic Crimpers and Decappers are hand held tools for attaching or removing aluminium seals on 8mm, 11mm, 13mm and 20mm vials. A single press of the button both closes the crimping jaws to attach the seal and opens them to release the vials. You can also remove a seal with a single press of the operation button on the decapper version.
The tools are compatible with standard aluminium seals, pressure release seals, tin plated seals, bi-metallic two piece seals and ‘flip-off’ seals. (Select the proper tool according to the finish size of the vials).
The Greyhound High Power Crimping Tool is designed with interchangeable jaws, so you only need one tool for various functions in your laboratory. The jaw sets are available as crimpers and decappers which fit standard lab vial seals with aluminium or two-part aluminium/steel caps. The tools are ergonomically designed to reduce strain and arm injury associated with many manual crimping tools.
Jaw sets are available in 8mm (crimper only), 11mm, 13mm, and 20mm cap sizes, including ‘flip-off’ caps in 13mm and 20mm sizes.
Switching Jaw Sets: Jaw sets are easy to interchange. Simply insert the jaw set into the bushing at the bottom of the tool. Push up and twist until the set locks into position. To remove, simply push the outside button and rotate.
Timothy Holding Co., Ltd.was founded in 1993. It has been specialized in producing universal joint shafts (also called cardan shaft or universal spindle) for more than twenty years.
http://www.timothyholding.com/
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org