AUC Certificate - • Project Budgeting and Financial Control
•
0 likes•170 views
This certificate certifies that Eng. Emad Eldeen Hamdy successfully completed the requirements of PRMG 030: Project Budgeting and Financial Control during the period of February to May 1999. The certificate is issued by the Department of Engineering, Engineering Services of the American University in Cairo.
Report
Share
Report
Share
Download to read offline
Recommended
Atc tower
The document outlines the activity node diagram and critical path for building an ATC tower project. The critical path consists of activities A, B, C, D, and E which are expected to take a total of 27 weeks to complete. A delay of up to 5 weeks in designing the tower will not impact the overall project completion time since all parallel activities can still finish within the 27 week critical path.
Pile Detail
This document provides pile details for a hotel tower project, including:
- The toe level is at -33.00m and the pile elevation for P1 is at +0.175m.
- The top of raft and pile elevations for P2 to P4 is shown.
- The toe level is at -39.00m and the pile cut off levels are shown at -4.425m, -1.925m, and -2.325m.
- Project details like the date, drawing number, scale, job number, client and other parties are listed.
Pert & cpm project management
This document discusses project management techniques CPM and PERT. It begins by defining a project and project management. It then discusses network planning methods including CPM and PERT. The four steps to managing a project with these methods are described: describing the project, diagramming the network, estimating time of completion, and monitoring progress. Key concepts like activities, precedence relationships, and events are also defined. The document goes on to provide details on CPM and PERT, including estimating time, determining critical paths, and differences between the two methods.
6.1 Polygon Sum Conjecture (2009)
The document discusses conjectures about the sum of angles in different polygons. It states that the sum of angles in a triangle is 180 degrees, the sum in a quadrilateral is 360 degrees, and the sum in any n-gon polygon is (n-2)180 degrees. It also describes equilateral, equiangular, and regular polygons and includes a conjecture that the measure of one angle in an equiangular polygon can be found using a specific expression.
AUC Certificate - Microcomputer Engineering Applications Electronic Spread Sh...
This certificate certifies that Eng. Emad El-Deen Hamdy successfully completed the requirements of Cade 1: Microcomputer Engineering Applications - Electronic Spread Sheets during the period of September 1999 to January 2000. The certificate was issued by the Department of Engineering, Engineering Services.
06-Appreciation Letters
The document is a note of appreciation from Target Engineering Construction Co. LLC to the project management team working on the construction of a commercial building for H.H. Sheikh Fatima bint Mubarak in Abu Dhabi. It thanks the team for their efforts that resulted in the timely completion of the project to required standards and quality. It specifically mentions the close follow-up of schedules and milestones, high quality of work, and general tidiness and safety awareness on site. The memo is to be passed to the project management team and encourages them to maintain their good work.
Emad Hamdy Resume
Emaduldin Hamdy is a senior project manager with over 20 years of experience managing commercial, industrial, and healthcare construction projects in Qatar, UAE, and Egypt. He has successfully delivered over $1 billion in projects on time and under budget. His areas of expertise include project management, team leadership, risk management, contract management, scheduling, budgeting, and client relationships.
Recommended
Atc tower
The document outlines the activity node diagram and critical path for building an ATC tower project. The critical path consists of activities A, B, C, D, and E which are expected to take a total of 27 weeks to complete. A delay of up to 5 weeks in designing the tower will not impact the overall project completion time since all parallel activities can still finish within the 27 week critical path.
Pile Detail
This document provides pile details for a hotel tower project, including:
- The toe level is at -33.00m and the pile elevation for P1 is at +0.175m.
- The top of raft and pile elevations for P2 to P4 is shown.
- The toe level is at -39.00m and the pile cut off levels are shown at -4.425m, -1.925m, and -2.325m.
- Project details like the date, drawing number, scale, job number, client and other parties are listed.
Pert & cpm project management
This document discusses project management techniques CPM and PERT. It begins by defining a project and project management. It then discusses network planning methods including CPM and PERT. The four steps to managing a project with these methods are described: describing the project, diagramming the network, estimating time of completion, and monitoring progress. Key concepts like activities, precedence relationships, and events are also defined. The document goes on to provide details on CPM and PERT, including estimating time, determining critical paths, and differences between the two methods.
6.1 Polygon Sum Conjecture (2009)
The document discusses conjectures about the sum of angles in different polygons. It states that the sum of angles in a triangle is 180 degrees, the sum in a quadrilateral is 360 degrees, and the sum in any n-gon polygon is (n-2)180 degrees. It also describes equilateral, equiangular, and regular polygons and includes a conjecture that the measure of one angle in an equiangular polygon can be found using a specific expression.
AUC Certificate - Microcomputer Engineering Applications Electronic Spread Sh...
This certificate certifies that Eng. Emad El-Deen Hamdy successfully completed the requirements of Cade 1: Microcomputer Engineering Applications - Electronic Spread Sheets during the period of September 1999 to January 2000. The certificate was issued by the Department of Engineering, Engineering Services.
06-Appreciation Letters
The document is a note of appreciation from Target Engineering Construction Co. LLC to the project management team working on the construction of a commercial building for H.H. Sheikh Fatima bint Mubarak in Abu Dhabi. It thanks the team for their efforts that resulted in the timely completion of the project to required standards and quality. It specifically mentions the close follow-up of schedules and milestones, high quality of work, and general tidiness and safety awareness on site. The memo is to be passed to the project management team and encourages them to maintain their good work.
Emad Hamdy Resume
Emaduldin Hamdy is a senior project manager with over 20 years of experience managing commercial, industrial, and healthcare construction projects in Qatar, UAE, and Egypt. He has successfully delivered over $1 billion in projects on time and under budget. His areas of expertise include project management, team leadership, risk management, contract management, scheduling, budgeting, and client relationships.
AUC Certificate - Project Feasibility Studies
This certificate from the African University certifies that Eng. Emad El-Deen Hanady successfully completed the requirements for PRMG 050: Project Feasibility Studies during the period of February to May 1999. The certificate is signed by the coordinator and director of the Department of Engineering and Engineering Services.
PMP Certificate
This document certifies that Emaduldin Hamdy Abdulfattah has been granted the Project Management Professional (PMP)® credential based on a formal evaluation that demonstrated his experience, knowledge, and performance in achieving organizational objectives through defining and overseeing projects and resources. The certification is signed by the Chair of the Board of Directors and President and Chief Executive Officer of the Institute and is valid until June 2019.
086301 -Experience Letter IBM
This letter certifies that Bulbul Ahmed was employed by IBM India Private Limited from January 1, 2014 to March 24, 2014 as a Fin & Admin Business Associate. It further notes that Bulbul Ahmed joined IBM India Private Limited on January 1, 2014 due to a transfer from IBM Daksh Pvt Ltd, where he began working on October 29, 2012. The letter was issued on May 12, 2014 by Saju J. Pynummootil, the Offboarding Delivery Leader at IBM India Private Limited.
Job Experience Letter Format
A letter of experience is a document certifying an individuals previous work experience with a current or past employer.
experience certificates.PDF
This document provides three certificates of employment for Muhammad Aamir Shahzad. The certificates are from M/S.Descon Engineering LLC in Qatar, Technip in Abu Dhabi, and Descon Engineering in Abu Dhabi, certifying that Mr. Shahzad worked as an electrical inspector and QC inspector from 2012 to 2010. The certificates praise his job performance and contributions to various projects.
MMUP exam quastions (provided by people who took the exam)
The document contains multiple choice questions about engineering concepts. It covers topics like materials strength, stresses, concrete properties, structural analysis, transportation engineering, project management, and geotechnical engineering. The questions test understanding of key terms, formulas, and applications across various domains of civil engineering.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
Low power architecture of logic gates using adiabatic techniques
The growing significance of portable systems to limit power consumption in ultra-large-scale-integration chips of very high density, has recently led to rapid and inventive progresses in low-power design. The most effective technique is adiabatic logic circuit design in energy-efficient hardware. This paper presents two adiabatic approaches for the design of low power circuits, modified positive feedback adiabatic logic (modified PFAL) and the other is direct current diode based positive feedback adiabatic logic (DC-DB PFAL). Logic gates are the preliminary components in any digital circuit design. By improving the performance of basic gates, one can improvise the whole system performance. In this paper proposed circuit design of the low power architecture of OR/NOR, AND/NAND, and XOR/XNOR gates are presented using the said approaches and their results are analyzed for powerdissipation, delay, power-delay-product and rise time and compared with the other adiabatic techniques along with the conventional complementary metal oxide semiconductor (CMOS) designs reported in the literature. It has been found that the designs with DC-DB PFAL technique outperform with the percentage improvement of 65% for NOR gate and 7% for NAND gate and 34% for XNOR gate over the modified PFAL techniques at 10 MHz respectively.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
More Related Content
Viewers also liked
AUC Certificate - Project Feasibility Studies
This certificate from the African University certifies that Eng. Emad El-Deen Hanady successfully completed the requirements for PRMG 050: Project Feasibility Studies during the period of February to May 1999. The certificate is signed by the coordinator and director of the Department of Engineering and Engineering Services.
PMP Certificate
This document certifies that Emaduldin Hamdy Abdulfattah has been granted the Project Management Professional (PMP)® credential based on a formal evaluation that demonstrated his experience, knowledge, and performance in achieving organizational objectives through defining and overseeing projects and resources. The certification is signed by the Chair of the Board of Directors and President and Chief Executive Officer of the Institute and is valid until June 2019.
086301 -Experience Letter IBM
This letter certifies that Bulbul Ahmed was employed by IBM India Private Limited from January 1, 2014 to March 24, 2014 as a Fin & Admin Business Associate. It further notes that Bulbul Ahmed joined IBM India Private Limited on January 1, 2014 due to a transfer from IBM Daksh Pvt Ltd, where he began working on October 29, 2012. The letter was issued on May 12, 2014 by Saju J. Pynummootil, the Offboarding Delivery Leader at IBM India Private Limited.
Job Experience Letter Format
A letter of experience is a document certifying an individuals previous work experience with a current or past employer.
experience certificates.PDF
This document provides three certificates of employment for Muhammad Aamir Shahzad. The certificates are from M/S.Descon Engineering LLC in Qatar, Technip in Abu Dhabi, and Descon Engineering in Abu Dhabi, certifying that Mr. Shahzad worked as an electrical inspector and QC inspector from 2012 to 2010. The certificates praise his job performance and contributions to various projects.
MMUP exam quastions (provided by people who took the exam)
The document contains multiple choice questions about engineering concepts. It covers topics like materials strength, stresses, concrete properties, structural analysis, transportation engineering, project management, and geotechnical engineering. The questions test understanding of key terms, formulas, and applications across various domains of civil engineering.
Viewers also liked (7)
MMUP exam quastions (provided by people who took the exam)
MMUP exam quastions (provided by people who took the exam)
Recently uploaded
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
Low power architecture of logic gates using adiabatic techniques
The growing significance of portable systems to limit power consumption in ultra-large-scale-integration chips of very high density, has recently led to rapid and inventive progresses in low-power design. The most effective technique is adiabatic logic circuit design in energy-efficient hardware. This paper presents two adiabatic approaches for the design of low power circuits, modified positive feedback adiabatic logic (modified PFAL) and the other is direct current diode based positive feedback adiabatic logic (DC-DB PFAL). Logic gates are the preliminary components in any digital circuit design. By improving the performance of basic gates, one can improvise the whole system performance. In this paper proposed circuit design of the low power architecture of OR/NOR, AND/NAND, and XOR/XNOR gates are presented using the said approaches and their results are analyzed for powerdissipation, delay, power-delay-product and rise time and compared with the other adiabatic techniques along with the conventional complementary metal oxide semiconductor (CMOS) designs reported in the literature. It has been found that the designs with DC-DB PFAL technique outperform with the percentage improvement of 65% for NOR gate and 7% for NAND gate and 34% for XNOR gate over the modified PFAL techniques at 10 MHz respectively.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Horizon Generation
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Kinematics 11th jpp- 01. ( Solved ) unacademy namo kaul on 14th may...
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Recently uploaded (20)
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
2. Operations Strategy in a Global Environment.ppt
2. Operations Strategy in a Global Environment.ppt
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Low power architecture of logic gates using adiabatic techniques
Low power architecture of logic gates using adiabatic techniques
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
AUC Certificate - • Project Budgeting and Financial Control
- 1. @n &.rrirdn JHnibewitgBn @.a;rs DEPARTMENT OF ENGINEERING ENGINEERING SERVICES CERTIFIES THAT E,IG. EMAD EL.f)E,E,N HAMDY HAS SUCCESSFULLY COMPLETED THE REOUIREMENTS OF PRMG O3O: PROJECT BIJDGETIIG AIT) FIIAICIAL CONTROL DURING THE PERIOD FE,BRUARY - MAYrL999 COORDINATOR DIRECTOR