This document discusses dynamic force analysis and presents an approximate analytical method for calculating the angular acceleration of a connecting rod. It defines key terms used in the analysis, including the length of the connecting rod, radius of the crank circle, inclination of the connecting rod, and the ratio of the connecting rod length to crank radius. The document is authored by Dr. Ambuj Saxena from G. L. Bajaj Institute of Technology and Management in India.
Analysis of bending strength of bevel gear by FEMAM Publications
In bevel gear will have a tangential load, radial load and axial load due to the speed and torque .This will be a
transient phenomenon and will need careful stress analysis for determining life of the gear. In gear design, the Mechanism will
be more Challenging as it should transmit high torque. All gears are not to be used for such high torque applications due to their
low capacity and strength. Bevel gears are used in differential drives, which can transmit power to two axles spinning at different
speeds, such as those on a cornering automobile, hand drill, to redirect the shaft from the horizontal gas turbine engine to the
vertical rotor. In this paper a comparison between Lewis equation and Ansys workbench is done.
Analysis and optimization of electrodes for improving the performance of ring...eSAT Journals
Abstract Performance of Ring Laser Gyros (RLGs) solely depends upon the stability of scale factor. Variation in scale factor is directly related to the changes in the path length of the gyros. Any thermal and mechanical gradients are mainly responsible for variation in path length. In the case of prism based RLGs, electrodes are utilized for RF discharge to excite the gain medium (He-Ne Laser) as well as for sustenance of laser. Due to the near proximity of the prism with respect to discharge, it gets heated up. Due to heating of prisms, the refractive index of the material of the prism also changes. This change in refractive index in turn affects the stability of the scale factor. In the present work experiment has been carried out to study and optimize the electrode length for achieving the desired output power and vice a versa to improve the performance of Ring Laser Gyros. Keywords: RLG, Scale factor, Path length, RF discharge, Self heating and Refractive Index
Analysis of bending strength of bevel gear by FEMAM Publications
In bevel gear will have a tangential load, radial load and axial load due to the speed and torque .This will be a
transient phenomenon and will need careful stress analysis for determining life of the gear. In gear design, the Mechanism will
be more Challenging as it should transmit high torque. All gears are not to be used for such high torque applications due to their
low capacity and strength. Bevel gears are used in differential drives, which can transmit power to two axles spinning at different
speeds, such as those on a cornering automobile, hand drill, to redirect the shaft from the horizontal gas turbine engine to the
vertical rotor. In this paper a comparison between Lewis equation and Ansys workbench is done.
Analysis and optimization of electrodes for improving the performance of ring...eSAT Journals
Abstract Performance of Ring Laser Gyros (RLGs) solely depends upon the stability of scale factor. Variation in scale factor is directly related to the changes in the path length of the gyros. Any thermal and mechanical gradients are mainly responsible for variation in path length. In the case of prism based RLGs, electrodes are utilized for RF discharge to excite the gain medium (He-Ne Laser) as well as for sustenance of laser. Due to the near proximity of the prism with respect to discharge, it gets heated up. Due to heating of prisms, the refractive index of the material of the prism also changes. This change in refractive index in turn affects the stability of the scale factor. In the present work experiment has been carried out to study and optimize the electrode length for achieving the desired output power and vice a versa to improve the performance of Ring Laser Gyros. Keywords: RLG, Scale factor, Path length, RF discharge, Self heating and Refractive Index
Genetic programming for prediction of local scour at vertical bridge abutmenteSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Comparative study of slot loaded rectangular and triangular microstrip array ...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Subspace based doa estimation techniqueseSAT Journals
Abstract The subspace based techniques are used for Direction of Arrival (DOA) estimation in this work. The subspace based techniques are based on using the eigen structure of data covariance matrix. The subspace based techniques includes MUSIC, ROOT-MUSIC, ESPRIT. The aim is to analyze the performance of DOA estimation algorithms in challenging environment, such as low signal to noise ratio, closely spaced sources. The performance of subspace based DOA estimation algorithm is done on Uniform Linear Array (ULA). Simulation result shows the effect of varying parameters will affect DOA estimation. The simulation shows that the MUSIC algorithm has better accuracy as compared to the Root-MUSIC and ESPRIT. Keywords: DOA, MUSIC, Root-MUSIC, and ESPRIT
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
ANALYSIS AND DESIGN OF MULTIPHASE INDUCTION MACHINE.pptxSomu Gupta
Induction motor are also called AC electric motor and the rotating torque in the
rotor is obtained due to electromagnetic induction in the rotating magnetic field of
the stator winding. As they operate at speed less than synchronous speed these
motor are also referred as asynchronous motor
Genetic programming for prediction of local scour at vertical bridge abutmenteSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Comparative study of slot loaded rectangular and triangular microstrip array ...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Subspace based doa estimation techniqueseSAT Journals
Abstract The subspace based techniques are used for Direction of Arrival (DOA) estimation in this work. The subspace based techniques are based on using the eigen structure of data covariance matrix. The subspace based techniques includes MUSIC, ROOT-MUSIC, ESPRIT. The aim is to analyze the performance of DOA estimation algorithms in challenging environment, such as low signal to noise ratio, closely spaced sources. The performance of subspace based DOA estimation algorithm is done on Uniform Linear Array (ULA). Simulation result shows the effect of varying parameters will affect DOA estimation. The simulation shows that the MUSIC algorithm has better accuracy as compared to the Root-MUSIC and ESPRIT. Keywords: DOA, MUSIC, Root-MUSIC, and ESPRIT
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
ANALYSIS AND DESIGN OF MULTIPHASE INDUCTION MACHINE.pptxSomu Gupta
Induction motor are also called AC electric motor and the rotating torque in the
rotor is obtained due to electromagnetic induction in the rotating magnetic field of
the stator winding. As they operate at speed less than synchronous speed these
motor are also referred as asynchronous motor
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Angular Acceleration of Connecting Rod (Analytical Method)
1. Unit-III
Dynamic Force Analysis
Dr. Ambuj Saxena
Associate Professor
Department of Mechanical Engineering
G. L. Bajaj Institute of Technology and Management
Plot No. 2, Knowledge Park III,
Greater Noida, Distt. G.B.Nagar (U.P.) India -201306
Theory of Machines
(RME-602)
2. l = Length of connecting rod between the centers,
r = Radius of crank or crank pin circle,
∅ = Inclination of connecting rod to the line of stroke PO, and
n = Ratio of length of connecting rod to the radius of crank = l/r.
Approximate Analytical Method for angular
acceleration of the Connecting Rod
3. l = Length of connecting rod between the centers,
r = Radius of crank or crank pin circle,
∅ = Inclination of connecting rod to the line of stroke PO, and
n = Ratio of length of connecting rod to the radius of crank = l/r.
Approximate Analytical Method for angular
acceleration of the Connecting Rod
4. l = Length of connecting rod between the centers,
r = Radius of crank or crank pin circle,
∅ = Inclination of connecting rod to the line of stroke PO, and
n = Ratio of length of connecting rod to the radius of crank = l/r.
Approximate Analytical Method for angular
acceleration of the Connecting Rod
5. l = Length of connecting rod between the centers,
r = Radius of crank or crank pin circle,
∅ = Inclination of connecting rod to the line of stroke PO, and
n = Ratio of length of connecting rod to the radius of crank = l/r.
Approximate Analytical Method for angular
acceleration of the Connecting Rod
