ANAND MISHRA mgr
•Download as DOCX, PDF•
0 likes•30 views
This document contains the resume of Anand Mishra which summarizes his professional and educational experience. He has over 10 years of experience in planning, production, and process control roles. Currently he is the Assistant Manager of Planning at Pratibha Syntex Ltd in Indore where he is responsible for sales and production planning, scheduling, master data creation, and SAP implementation. Previously he has worked as a Senior Executive in process control and has experience in dyehouse planning and process optimization. He has a MBA degree from NIBM Chennai and bachelor's degrees in science and information systems management.
Report
Share
Report
Share
Recommended
Resume
Vinoth Kumar S is an experienced quality assurance engineer seeking a new position. He has over 5 years of experience in automobile manufacturing, specializing in quality management. He is certified in ISO/TS 16949 and possesses strong communication, analytical, and interpersonal skills. His experience includes internal auditing, manufacturing engineering, quality planning, and process improvement projects.
BE mechanical engineer with 9.7 years experience in production
BE mechanical engineer with 9.7 years exp in production department ,good experience in planning,5s,kaizen,fmea,7 qc tools & story,lean manufacturing ,smed,spc techniques
Curriculum Vitae of Clarissa Thulwanth 2016
Clarissa Thulwanth is a process engineer with 3 years of experience in the chemical and petrochemical industry. She provides engineering support for process and control engineering in both plant operations and projects. She has a bachelor's degree in chemical engineering and is a registered Candidate Engineer with ECSA. Her career goals include continuous self-improvement and optimizing operations without negatively impacting other processes.
Resume
Harisrinivasan M is seeking a role that allows him to utilize his skills and continuously learn. He has over 6 years of experience in product lifecycle management, engineering change management, and manufacturing processes. Currently he is a PDM Engineer at LM Wind Power Technologies, where he maintains product data and executes engineering changes. Previously he was a Process Engineer at Flextronics where he created documentation, implemented changes, and received awards for improvements. He has a Master's in Operations and Supply Chain Management and a Bachelor's in Electrical Engineering.
letterofrecomendationalan
Larry Opinsky, owner of a shoe company since 1981, writes a letter recommending Alan Estes for employment. Alan worked as the factory manager for Opinsky's company from 2014 to 2015. Opinsky states that Alan exceeded all expectations by overseeing 25 employees and having expertise in electrical systems, machinery, software and industrial design. Alan developed new systems that improved production efficiency and quality. He also learned CAD software and took existing designs digital. Finally, Alan successfully relocated the factory within a tight timeline and without any injuries on the job site. Opinsky highly recommends Alan as a skilled and competent leader any company would be lucky to have.
Rashmi with PNG Quality
Rashmi is seeking a challenging career where she can enhance her skills. She has over 10 years of experience in industries including roles in production planning, quality control, and process improvement. Her experience includes working at PNG Transformers Pvt. Ltd. as a Senior Executive and at C&S Electric Ltd. as an Assistant Engineer and Engineer. She has expertise in areas like process improvement, value analysis, and is trained in quality management systems like ISO and SPC.
Ganesh Bangar c v (Purchase Plannning Procurement)
Ganesh Bangar is a motivated professional with 2 years of experience in purchase and planning. He currently works as an Associate Materials Engineer at Larsen and Toubro Ltd in Ahmednagar, Maharashtra. His responsibilities include purchasing switchgear components, raising purchase orders, vendor management, inventory management, and production planning. He has a B.E. in electronics from MIT Aurangabad and is proficient in SAP and computer languages like C, C++.
5 S and KAIZEN
5S and KAIZEN are the two important knowledge for engineers of all departments. Production engineer should have this knowledge.
Recommended
Resume
Vinoth Kumar S is an experienced quality assurance engineer seeking a new position. He has over 5 years of experience in automobile manufacturing, specializing in quality management. He is certified in ISO/TS 16949 and possesses strong communication, analytical, and interpersonal skills. His experience includes internal auditing, manufacturing engineering, quality planning, and process improvement projects.
BE mechanical engineer with 9.7 years experience in production
BE mechanical engineer with 9.7 years exp in production department ,good experience in planning,5s,kaizen,fmea,7 qc tools & story,lean manufacturing ,smed,spc techniques
Curriculum Vitae of Clarissa Thulwanth 2016
Clarissa Thulwanth is a process engineer with 3 years of experience in the chemical and petrochemical industry. She provides engineering support for process and control engineering in both plant operations and projects. She has a bachelor's degree in chemical engineering and is a registered Candidate Engineer with ECSA. Her career goals include continuous self-improvement and optimizing operations without negatively impacting other processes.
Resume
Harisrinivasan M is seeking a role that allows him to utilize his skills and continuously learn. He has over 6 years of experience in product lifecycle management, engineering change management, and manufacturing processes. Currently he is a PDM Engineer at LM Wind Power Technologies, where he maintains product data and executes engineering changes. Previously he was a Process Engineer at Flextronics where he created documentation, implemented changes, and received awards for improvements. He has a Master's in Operations and Supply Chain Management and a Bachelor's in Electrical Engineering.
letterofrecomendationalan
Larry Opinsky, owner of a shoe company since 1981, writes a letter recommending Alan Estes for employment. Alan worked as the factory manager for Opinsky's company from 2014 to 2015. Opinsky states that Alan exceeded all expectations by overseeing 25 employees and having expertise in electrical systems, machinery, software and industrial design. Alan developed new systems that improved production efficiency and quality. He also learned CAD software and took existing designs digital. Finally, Alan successfully relocated the factory within a tight timeline and without any injuries on the job site. Opinsky highly recommends Alan as a skilled and competent leader any company would be lucky to have.
Rashmi with PNG Quality
Rashmi is seeking a challenging career where she can enhance her skills. She has over 10 years of experience in industries including roles in production planning, quality control, and process improvement. Her experience includes working at PNG Transformers Pvt. Ltd. as a Senior Executive and at C&S Electric Ltd. as an Assistant Engineer and Engineer. She has expertise in areas like process improvement, value analysis, and is trained in quality management systems like ISO and SPC.
Ganesh Bangar c v (Purchase Plannning Procurement)
Ganesh Bangar is a motivated professional with 2 years of experience in purchase and planning. He currently works as an Associate Materials Engineer at Larsen and Toubro Ltd in Ahmednagar, Maharashtra. His responsibilities include purchasing switchgear components, raising purchase orders, vendor management, inventory management, and production planning. He has a B.E. in electronics from MIT Aurangabad and is proficient in SAP and computer languages like C, C++.
5 S and KAIZEN
5S and KAIZEN are the two important knowledge for engineers of all departments. Production engineer should have this knowledge.
Resume_Sachin
This document provides a summary of Sachin Bajaj's work experience and qualifications. He has over 9 years of experience in production management roles. Most recently, he worked as an Assistant Manager of Production at Havells India Ltd. and SU-KAM POWER SYSTEMS LTD., where he was responsible for achieving production targets, improving productivity and quality, and implementing quality systems. He has a PGDBA in Operations and a BE in Electrical Engineering.
Resume 2016
Kelly Grantham has over 10 years of experience in engineering, quality control, and shipping/logistics roles. She is currently the Small Parcel Technical Shipping Lead at Electrolux, where she has led multiple projects saving hundreds of thousands of dollars through process improvements and standardization. Previously she held roles in quality control, packaging design, and project engineering. She has a Bachelor's degree in Engineering Technology from Western Carolina University, where she graduated with honors.
IBM H1B Resume_Natraj
This document provides a summary of Natrajan Krishnamoorthy's professional experience and qualifications. He has over 5 years of IT industry experience with SAP projects in automotive and retail industries. His skill set includes SAP ECC 6.0 with a focus on Material Management and Warehouse Management modules. He has worked as a Senior Consultant at IBM India implementing customized SAP solutions. Prior to this, he spent over 10 years working in supply chain and logistics roles for Caterpillar India, where he was involved in an SAP implementation project.
Mahesh Biradar Resume
This document contains the resume of Mahesh G. Biradar. It summarizes his objective of seeking a challenging position to utilize his skills and experience. It then outlines his core competencies which include over 3 years of experience in manufacturing processes and the metal cutting industry, expertise in machine tool project planning and implementation, and skills in optimization, manufacturing, operations, and maintaining statistical and financial records. It also provides details of his educational qualifications and work experience at Cooper Corporation as an Engineer Machine Shop/Manufacturing Engineer for the past 7 years where he is responsible for coordinating activities between departments to facilitate tool procurement and supervising engineering staff on projects.
Ask the expert
The document discusses the challenges that printers face in meeting demand for longer print runs between 500-20,000 copies using digital printers. It outlines criteria for an effective solution, including quality, reliability, fast turnaround, cost, flexibility and environmental factors. The document proposes that direct imaging presses from Presstek can bridge the gap by offering high quality printing at speeds that integrate smoothly into digital workflows, while bringing lost revenue back in-house through runs of 500 to 20,000 copies. Presstek also offers certified pre-owned presses at around 50% the cost of new presses.
Godknows K Chiodza cv
Godknows Kudzai Chiodza is seeking a position as a Process Engineer. He has a Bachelor's degree in Chemical Engineering and experience as a Trainee Chemical Engineer. He has skills in process and equipment design, problem solving, leadership, and communication. He is proficient in Microsoft Office, programming languages, and engineering software packages.
KiranRameshAngre.resume
Kiran Ramesh Angre is seeking a position as a successful engineer where he can continuously upgrade his skills and solve complex problems. He has over 5 years of work experience in production and quality engineering roles. His experience includes planning production activities, negotiating with vendors, developing new products, and ensuring quality standards. He is proficient in CATIA V-5 and has a diploma in mechanical engineering. In his personal time, he enjoys cricket, singing, reading novels and watching sci-fi movies.
CV Pedro Giuseppe Mar Garcia
Pedro Giuseppe Mar Garcia is a determined person seeking a position where he can help meet and exceed customer expectations. He has a background in engineering with a focus on manufacturing. His experience includes over 4 years working as an engineer at Samkwang Industries de Mexico and SMP Engine Management, where he coordinated new product development, implemented improvements in processes, and ensured safety and quality standards. He has strong computer skills including Microsoft Office, Solid Works, AutoCAD, and other engineering programs.
VIJAYNAGARRAJAN
Vijaynagarrajan VS is an accomplished manufacturing and operations leader with over 20 years of experience in production planning, sourcing, and quality management. He is currently the Operations Manager at Al Naseeb Machine Spare Parts Mfg L.L.C in Ajman, UAE, where he manages a team of 65 employees and drives cost reduction, productivity improvement, and new product development. Previously, he held production management roles at various manufacturing companies in India, where he improved efficiency, reduced costs, and ensured compliance with quality standards. Vijaynagarrajan has expertise in process improvement, purchasing, project management, and people development.
Raju Resume
Raju Devidas Lokhande is seeking a new opportunity with over 4.5 years of experience in materials management, supply chain management, and logistics. He received his SSC from Ahmednagar University of Pune in 2013. His professional experience includes roles at TotalLogistics India Pvt. Ltd., ConceptSpeciality Pack PvtLtd, and Shree Siddhivinayak, where he gained experience in inventory control, warehouse management, and ensuring on-time delivery of materials. He is proficient in SAP and Microsoft Office applications.
CV_Shimbhu dayal Sharma
Shimbhu dayal Sharma is seeking a position with over 3 years of experience in production/manufacturing operations and supply chain management. He currently works as an Assistant Executive at Siegwerk India where his duties include shop floor management, projects related to cost reduction, shift planning, SAP transactions, safety coordination, training employees, and meeting daily production targets. Shimbhu holds a Diploma in Printing from GPC and a B.A. from Govt. College, Bandikui. His skills include knowledge of printing processes, automation systems, teamwork, and people management.
CURRICULUM VITAE UPDATED
Navfal Ahmed is seeking a position with a progressive organization where he can contribute to the company's growth. He has over 10 years of experience in quality inspection and process engineering. His most recent roles include Process Engineer at Philips Lighting Arabia Limited from 2014 to present and Quality Inspector at the same company from 2012 to 2014. He is proficient in Oracle manufacturing and distribution modules. He also has experience as an Electrical AutoCAD Engineer from 2010 to 2011 where he designed electrical systems for various building types.
Timothy Wayne Samples (1)
Timothy Samples is seeking a challenging leadership position where he can apply his creative problem solving and management skills. He has over 15 years of experience in production and operations management at Honda Manufacturing of Alabama, where he held roles such as Team Coordinator, Production Technical Specialist, New Model Automation Lead, and Project Leader for Outsourcing Parts. Prior to Honda, he worked for 15 years at Gulf States Steel as a press welder operator and electronic tech trainee. He has strong computer, teamwork, problem solving, and leadership skills.
Sarath Sreedhar (082016)
Sreepuram (House)” Mob: +91 9036262666
Thalassery, Kerala. +91 9446267962
India – 670691 +91 9961499244
Currently Residing at Bangalore E-mail: sre.sarath@gmail.com
Seeking assignments in Manufacturing Engineering/Methods/ Industrial Engineering/
Program Management With an organization of repute
Ravi 31.01.2017
Ravi Pratap Singh Chouhan has over 1.2 years of experience as a Shift Engineer at J.K. Tyre & Industries Ltd in Gwalior. He holds a B.E. in Electronics and Communications Engineering and is seeking managerial level assignments in maintenance and monitoring projects. As a Shift Engineer, his responsibilities included managing a team of 12, supervising hourly reports, ensuring productivity and quality improvement, and maintaining safety rules. He has knowledge of machines including unistage machines, k-cutters, and dynamic balancing machines.
Raja cv_Manufacturing Engineer
Accomplished executive with 4 years of experience in the field of Manufacturing Systems Engineering services for Heavy earth moving equipment’s at Caterpillar Inc and 2+ year experience in the field of Piping Design at Design Viewz . Seeking assignments in the domain of production/Assembly planning/Virtual Manufacturing with an organization of high repute where there is a chance to learn, explore and fully utilize my skills and abilities for the benefit of the organization and thus enabling my career graph to attain new heights.
Yajuvendra Bamrara CV
This document contains a summary of Yajuvendra Bamrara's professional experience and qualifications. It includes details about his current role as a Senior Engineer of Production and Planning at ABB Limited since 2010, where he is responsible for production planning, supply chain management, and achieving production targets. Previous roles included working as an Engineer at Indo Asian Ltd. from 2006-2009 and as an Assistant Engineer at SUBROS Ltd. from 2004-2006. Bamrara has a Diploma in Mechanical Engineering and a BSc degree, and seeks new opportunities with a growth-oriented organization where he can further his professional development in production and technology.
Professional_-_Resume_-_Terryl_Griffin 20150901
Terry Griffin is a production supervisor with over 6 years of experience leading production teams and implementing process improvements. He is APICS certified and has a proven track record of improving efficiency, quality, and safety. His previous roles include production supervisor positions at Medtronic, Hearth and Home Technologies, and BIC APP, where he achieved reductions in quality issues, safety incidents, waste, and costs through lean practices. He has a bachelor's degree in business administration and is bilingual in English and Spanish.
snahasis (1) (1)
SNAHASIS CHOUDHURY is an Associate Engineer with over 11 years of experience in project planning, installation, commissioning, maintenance and team management. He currently works for Ananda Offset Private Limited in Kolkata, where he is responsible for maintenance of various packaging, printing, and utility machines. Some of his key responsibilities include executing maintenance plans, implementing preventive maintenance activities, and managing maintenance budgets. He is proficient in packaging and printing machines from manufacturers like FERAG, ITW, MOSCA, AFFELDT, MANUGRAPH, GOSS, and has basic knowledge of SAP's PM module.
Delia_Yojana_Ibanez_Resume
Delia Ibañez Duran seeks an industrial engineering position where she can utilize her process improvement expertise. She has experience analyzing, designing, and documenting workflow procedures as well as creating and implementing automated systems. As a business process analyst, she redesigned workflows to reduce downtime by 60% and increase system efficiency by 70%. She has a Master's degree in product and service management and is fluent in Spanish and English.
Haitham Seleem Resume
This document is a resume for Haythem Mohamed Seleem summarizing his experience in project management and SAP implementation. He has over 10 years of experience implementing SAP modules like MM, WM, FI, SD, and PP for various companies. Currently he is an experienced SAP MM/WM consultant looking for new opportunities.
Haitham Seleem
Haythem Mohamed Seleem has over 10 years of experience implementing and supporting SAP projects, particularly in materials management. He has worked on full life cycle SAP implementations for various manufacturing companies in Egypt. He is proficient in areas like procurement, inventory management, and production planning.
More Related Content
What's hot
Resume_Sachin
This document provides a summary of Sachin Bajaj's work experience and qualifications. He has over 9 years of experience in production management roles. Most recently, he worked as an Assistant Manager of Production at Havells India Ltd. and SU-KAM POWER SYSTEMS LTD., where he was responsible for achieving production targets, improving productivity and quality, and implementing quality systems. He has a PGDBA in Operations and a BE in Electrical Engineering.
Resume 2016
Kelly Grantham has over 10 years of experience in engineering, quality control, and shipping/logistics roles. She is currently the Small Parcel Technical Shipping Lead at Electrolux, where she has led multiple projects saving hundreds of thousands of dollars through process improvements and standardization. Previously she held roles in quality control, packaging design, and project engineering. She has a Bachelor's degree in Engineering Technology from Western Carolina University, where she graduated with honors.
IBM H1B Resume_Natraj
This document provides a summary of Natrajan Krishnamoorthy's professional experience and qualifications. He has over 5 years of IT industry experience with SAP projects in automotive and retail industries. His skill set includes SAP ECC 6.0 with a focus on Material Management and Warehouse Management modules. He has worked as a Senior Consultant at IBM India implementing customized SAP solutions. Prior to this, he spent over 10 years working in supply chain and logistics roles for Caterpillar India, where he was involved in an SAP implementation project.
Mahesh Biradar Resume
This document contains the resume of Mahesh G. Biradar. It summarizes his objective of seeking a challenging position to utilize his skills and experience. It then outlines his core competencies which include over 3 years of experience in manufacturing processes and the metal cutting industry, expertise in machine tool project planning and implementation, and skills in optimization, manufacturing, operations, and maintaining statistical and financial records. It also provides details of his educational qualifications and work experience at Cooper Corporation as an Engineer Machine Shop/Manufacturing Engineer for the past 7 years where he is responsible for coordinating activities between departments to facilitate tool procurement and supervising engineering staff on projects.
Ask the expert
The document discusses the challenges that printers face in meeting demand for longer print runs between 500-20,000 copies using digital printers. It outlines criteria for an effective solution, including quality, reliability, fast turnaround, cost, flexibility and environmental factors. The document proposes that direct imaging presses from Presstek can bridge the gap by offering high quality printing at speeds that integrate smoothly into digital workflows, while bringing lost revenue back in-house through runs of 500 to 20,000 copies. Presstek also offers certified pre-owned presses at around 50% the cost of new presses.
Godknows K Chiodza cv
Godknows Kudzai Chiodza is seeking a position as a Process Engineer. He has a Bachelor's degree in Chemical Engineering and experience as a Trainee Chemical Engineer. He has skills in process and equipment design, problem solving, leadership, and communication. He is proficient in Microsoft Office, programming languages, and engineering software packages.
KiranRameshAngre.resume
Kiran Ramesh Angre is seeking a position as a successful engineer where he can continuously upgrade his skills and solve complex problems. He has over 5 years of work experience in production and quality engineering roles. His experience includes planning production activities, negotiating with vendors, developing new products, and ensuring quality standards. He is proficient in CATIA V-5 and has a diploma in mechanical engineering. In his personal time, he enjoys cricket, singing, reading novels and watching sci-fi movies.
CV Pedro Giuseppe Mar Garcia
Pedro Giuseppe Mar Garcia is a determined person seeking a position where he can help meet and exceed customer expectations. He has a background in engineering with a focus on manufacturing. His experience includes over 4 years working as an engineer at Samkwang Industries de Mexico and SMP Engine Management, where he coordinated new product development, implemented improvements in processes, and ensured safety and quality standards. He has strong computer skills including Microsoft Office, Solid Works, AutoCAD, and other engineering programs.
VIJAYNAGARRAJAN
Vijaynagarrajan VS is an accomplished manufacturing and operations leader with over 20 years of experience in production planning, sourcing, and quality management. He is currently the Operations Manager at Al Naseeb Machine Spare Parts Mfg L.L.C in Ajman, UAE, where he manages a team of 65 employees and drives cost reduction, productivity improvement, and new product development. Previously, he held production management roles at various manufacturing companies in India, where he improved efficiency, reduced costs, and ensured compliance with quality standards. Vijaynagarrajan has expertise in process improvement, purchasing, project management, and people development.
Raju Resume
Raju Devidas Lokhande is seeking a new opportunity with over 4.5 years of experience in materials management, supply chain management, and logistics. He received his SSC from Ahmednagar University of Pune in 2013. His professional experience includes roles at TotalLogistics India Pvt. Ltd., ConceptSpeciality Pack PvtLtd, and Shree Siddhivinayak, where he gained experience in inventory control, warehouse management, and ensuring on-time delivery of materials. He is proficient in SAP and Microsoft Office applications.
CV_Shimbhu dayal Sharma
Shimbhu dayal Sharma is seeking a position with over 3 years of experience in production/manufacturing operations and supply chain management. He currently works as an Assistant Executive at Siegwerk India where his duties include shop floor management, projects related to cost reduction, shift planning, SAP transactions, safety coordination, training employees, and meeting daily production targets. Shimbhu holds a Diploma in Printing from GPC and a B.A. from Govt. College, Bandikui. His skills include knowledge of printing processes, automation systems, teamwork, and people management.
CURRICULUM VITAE UPDATED
Navfal Ahmed is seeking a position with a progressive organization where he can contribute to the company's growth. He has over 10 years of experience in quality inspection and process engineering. His most recent roles include Process Engineer at Philips Lighting Arabia Limited from 2014 to present and Quality Inspector at the same company from 2012 to 2014. He is proficient in Oracle manufacturing and distribution modules. He also has experience as an Electrical AutoCAD Engineer from 2010 to 2011 where he designed electrical systems for various building types.
Timothy Wayne Samples (1)
Timothy Samples is seeking a challenging leadership position where he can apply his creative problem solving and management skills. He has over 15 years of experience in production and operations management at Honda Manufacturing of Alabama, where he held roles such as Team Coordinator, Production Technical Specialist, New Model Automation Lead, and Project Leader for Outsourcing Parts. Prior to Honda, he worked for 15 years at Gulf States Steel as a press welder operator and electronic tech trainee. He has strong computer, teamwork, problem solving, and leadership skills.
Sarath Sreedhar (082016)
Sreepuram (House)” Mob: +91 9036262666
Thalassery, Kerala. +91 9446267962
India – 670691 +91 9961499244
Currently Residing at Bangalore E-mail: sre.sarath@gmail.com
Seeking assignments in Manufacturing Engineering/Methods/ Industrial Engineering/
Program Management With an organization of repute
Ravi 31.01.2017
Ravi Pratap Singh Chouhan has over 1.2 years of experience as a Shift Engineer at J.K. Tyre & Industries Ltd in Gwalior. He holds a B.E. in Electronics and Communications Engineering and is seeking managerial level assignments in maintenance and monitoring projects. As a Shift Engineer, his responsibilities included managing a team of 12, supervising hourly reports, ensuring productivity and quality improvement, and maintaining safety rules. He has knowledge of machines including unistage machines, k-cutters, and dynamic balancing machines.
Raja cv_Manufacturing Engineer
Accomplished executive with 4 years of experience in the field of Manufacturing Systems Engineering services for Heavy earth moving equipment’s at Caterpillar Inc and 2+ year experience in the field of Piping Design at Design Viewz . Seeking assignments in the domain of production/Assembly planning/Virtual Manufacturing with an organization of high repute where there is a chance to learn, explore and fully utilize my skills and abilities for the benefit of the organization and thus enabling my career graph to attain new heights.
Yajuvendra Bamrara CV
This document contains a summary of Yajuvendra Bamrara's professional experience and qualifications. It includes details about his current role as a Senior Engineer of Production and Planning at ABB Limited since 2010, where he is responsible for production planning, supply chain management, and achieving production targets. Previous roles included working as an Engineer at Indo Asian Ltd. from 2006-2009 and as an Assistant Engineer at SUBROS Ltd. from 2004-2006. Bamrara has a Diploma in Mechanical Engineering and a BSc degree, and seeks new opportunities with a growth-oriented organization where he can further his professional development in production and technology.
Professional_-_Resume_-_Terryl_Griffin 20150901
Terry Griffin is a production supervisor with over 6 years of experience leading production teams and implementing process improvements. He is APICS certified and has a proven track record of improving efficiency, quality, and safety. His previous roles include production supervisor positions at Medtronic, Hearth and Home Technologies, and BIC APP, where he achieved reductions in quality issues, safety incidents, waste, and costs through lean practices. He has a bachelor's degree in business administration and is bilingual in English and Spanish.
snahasis (1) (1)
SNAHASIS CHOUDHURY is an Associate Engineer with over 11 years of experience in project planning, installation, commissioning, maintenance and team management. He currently works for Ananda Offset Private Limited in Kolkata, where he is responsible for maintenance of various packaging, printing, and utility machines. Some of his key responsibilities include executing maintenance plans, implementing preventive maintenance activities, and managing maintenance budgets. He is proficient in packaging and printing machines from manufacturers like FERAG, ITW, MOSCA, AFFELDT, MANUGRAPH, GOSS, and has basic knowledge of SAP's PM module.
Delia_Yojana_Ibanez_Resume
Delia Ibañez Duran seeks an industrial engineering position where she can utilize her process improvement expertise. She has experience analyzing, designing, and documenting workflow procedures as well as creating and implementing automated systems. As a business process analyst, she redesigned workflows to reduce downtime by 60% and increase system efficiency by 70%. She has a Master's degree in product and service management and is fluent in Spanish and English.
What's hot (20)
Similar to ANAND MISHRA mgr
Haitham Seleem Resume
This document is a resume for Haythem Mohamed Seleem summarizing his experience in project management and SAP implementation. He has over 10 years of experience implementing SAP modules like MM, WM, FI, SD, and PP for various companies. Currently he is an experienced SAP MM/WM consultant looking for new opportunities.
Haitham Seleem
Haythem Mohamed Seleem has over 10 years of experience implementing and supporting SAP projects, particularly in materials management. He has worked on full life cycle SAP implementations for various manufacturing companies in Egypt. He is proficient in areas like procurement, inventory management, and production planning.
Resume_Jose_Montero v2.0
José Carlos Montero Villafuerte is an SAP ABAP semi-senior consultant with over five years of experience leading technical teams and developing solutions for various SAP modules. He has a bachelor's degree in systems engineering and computer science and is proficient in ABAP, reports, interfaces, and more. His experience includes projects in manufacturing, retail, government, and other industries for clients in Peru, Ecuador, and the United States.
BHUVANESWAR_RAO_MIRYALA
- MM Consultant with over 14 years of industrial experience and 7 years of SAP MM experience. Specializes in materials management, procurement, inventory management, and Indian taxation configurations in SAP.
- Has worked on various implementation and support projects for companies like Dabur India, Abhijeet Group of Industries, GE Water, and Reliance Industries. Responsibilities included requirements gathering, blueprint design, configuration, testing, go-live support and more.
- Expertise in SAP MM, pricing procedures, tax procedures, inventory management, and integration with other SAP modules like SD, FI, and PP. Experienced with various SAP releases from R/3 to ECC 6.0.
Rajeev jindal mm_sd_ewm
Rajeev Jindal has over 14 years of experience working with SAP modules including MM, WM, EWM, QM, and SD. He has extensive experience implementing SAP solutions for clients in various industries and specializes in areas like material master data, purchasing processes, warehouse management, and fuel supply chain management. Some of his roles include serving as project lead for implementations of SAP EWM and MM solutions for automotive and utility companies in Dubai and India. He also has experience in business requirements gathering, system configuration, providing end user training, and post go-live support.
Thiru CV 15 02 2016-FRP
Thirumurugan is seeking a challenging position in production, planning, or process management in the wind turbine composites manufacturing field. He has over 12 years of experience in composites production, planning, process improvement, and assembly line management. His core competencies include integrated management systems, FRP production, production planning and control, lean management, problem solving methodologies, and continual improvement.
Samarendra_Roy_Senior_Consultant
Samarendra Prasad Roy has over 8 years of experience working with SAP modules like MM, SD, WM, PM, and QM. He currently works as a senior consultant for Capgemini, where he serves as a global test lead and performs functional and regression testing. Previously, he has worked for companies like Mahindra & Mahindra and Baker Hughes, where he supported SAP implementations and provided helpdesk support. He aims to help organizations drive technology initiatives and continuous professional growth through his experience with SAP solutions.
jagadeeshanagaraju-541
- Jagadeesha N is a SAP ERP Logistic Consultant with over 10 years of experience implementing and supporting SAP MM, SD, and PS modules.
- He has extensive experience leading SAP MM implementations and providing post-go-live support across various industries.
- His most recent role is as a Senior Software Engineer at Ness Technologies, where he works on the global SAP logistics module, rollouts, support and development.
Resume new
Priyaranjan Kumar has over 5 years of experience in maintenance and project roles in a process plant. He currently works as an Assistant Manager of Maintenance at Exide Industries, where he leads a team of 5 engineers, 12 supervisors and 150 personnel. Some of his key responsibilities include implementing SAP PM modules, conducting cost analysis and ensuring efficient maintenance operations. He has experience in activities like root cause analysis, equipment audits, and coordinating training programs.
2016 01 - nathaniel s mead jr resume
Nathaniel S Mead Jr. has over 33 years of experience in IT and ERP systems including 7+ years experience with SAP. He has extensive experience implementing and supporting SAP modules for PP, MM, WM, SD and additional modules. Mead has experience leading SAP implementations and providing ongoing support at several companies including defense contractors Red River Army Depot and Letterkenny Army Depot as part of their Logistics Modernization Programs. He is skilled at analyzing business processes, solving problems, and training users.
Nisar Ahmed CV
Nisar Ahmed has over 20 years of experience in supply chain management, ERP system implementation and administration. He has a MS in Computer Science and is Microsoft Certified in several programs. He is currently the Manager of the ERP Department at Royal Group where he implemented SAP Business One and designed customized reports. Previously, he held supply chain management roles at various companies where he streamlined operations and achieved production targets.
CV_Rex Fu_PP QM
Rex Fu has nearly 10 years of experience implementing SAP ERP projects across various industries including automotive, pharmaceutical, food, chemicals, electronics, machinery manufacturing, and agriculture. He has strong skills in SAP modules like PP, QM, MM, PM, and SD and experience with blueprint design, business analysis, system demonstrations, and customer training. His most recent projects include ACS planning upgrades and axle carrier warehouse management at BMW Brilliance Automotive.
Curriculam Vitae-SAP Consultant 2016
Pasupathy Nath Bahadur is submitting his CV for evaluation of a position involving SAP implementation, support, and master data entry. He has over 23 years of experience in materials management, inventory control, project coordination, and SAP implementation and support. His CV details his educational qualifications and SAP training, employment history implementing and supporting SAP MM, SD, and PS modules for 6 companies, areas of SAP configuration experience, and personal details.
resume_Madhusudhan_ May16
Madhusudhana M Y is a seasoned IT professional with over 25 years of experience in SAP implementation and support. He has expertise in modules like Inventory, Production, Quality Control and HR. Currently he is working as IT Manager at EMMVEE Photovoltaic Power Pvt Ltd where he manages SAP activities, IT infrastructure, and statutory audits. Previously he has worked on SAP implementations and support at Provimi Animal Nutrition Industries Pvt Ltd. He has also worked on various software development projects at other companies. Madhusudhana holds a Bachelor's degree in Computer Application and diploma in Computer Science.
Dipanjan Roy
This document provides a summary of Dipanjan Roy's professional experience and qualifications. It outlines his 6 years of experience working for Accenture, where he specialized in SAP FICO solutions, indirect taxation, and test management consulting. He has extensive expertise in SAP modules like FICO, indirect taxation in various regions, and commodity trading. The document also lists his technical skills, professional certifications, education qualifications and extracurricular achievements.
KARTHIK CV
This document is a curriculum vitae for M V Sai Karthik summarizing his professional experience and qualifications. He has over 3 years of experience in new product development for engine cooling systems at Tata Toyo Radiator Limited, where he led projects from concept to production and ensured documentation was completed per quality standards. He holds a diploma in mechanical engineering and has skills in CAD software, SAP modules, and quality systems like APQP and PPAP. His objective is to work for a company where he can continue developing new products and coordinating with others.
Suresh SAP Project Manager-Resume
Suresh Kumar Nayak has over 13 years of experience in SAP FI/CO consulting and project management. He has extensive experience implementing and supporting SAP ECC 6 and S/4 HANA projects across various industries. Some of his skills include business process analysis, solution design, project management, testing, training and post go-live support. He holds an M.Com degree from Ranchi University and has experience managing projects teams of up to 20 people.
Ajay-ABAP-Resume
This document provides a curriculum vitae for Ajay Kumar, who is an Assistant Manager with over 19 years of experience, including 8 years and 2 months of experience in SAP ABAP. He is seeking a challenging career in ERP as an SAP ABAP professional where he can contribute his knowledge and skills. His technical expertise includes reports, layout sets, module pool programming, and an understanding of the SD, MM, and PP modules in SAP. Currently he works as an SAP-ABAP Technical Consultant and MM Module functional consultant for Bhushan Steel Limited in Maharashtra, India.
Byron Pang (LinkedIn- Oct 2014)
Byron Pang is an Industrial Engineering professional with over 15 years of experience in various roles. He is currently an IE Manager at Infineon Technologies where he leads a team and is responsible for maintaining manufacturing KPIs and driving productivity improvements. Some of his past accomplishments include receiving various achievement awards and improving OEE, setup times, and cycle times through projects applying IE tools and methodologies.
Documentation_Customized_ERP
This document is a project report on developing a customized ERP solution for a production unit. It discusses the need to replace an existing manual paper-based system with a new computerized ERP system to manage employee information, production, inventory, and generate reports. The project aims to develop a web-based ERP software using an incremental model to provide real-time data access and management from anywhere. It identifies risks such as technical issues with new technologies, changing requirements impacting costs, and challenges completing the project on schedule.
Similar to ANAND MISHRA mgr (20)
ANAND MISHRA mgr
- 1. a n a n d jiw a r a @ g ma il. c o m ▪ Mo : +9 1 - 9 9 2 6 4 4 1 3 3 3 ANAND MISHRA Professional Experience Astt Manager–Planning –Pratibha Syntex Ltd, Indore▪ Jan’2012 –till yet Sales and production planning. Scheduling and capacity planning. Master data : Creation of BOM,work centers, rate routings, production versions, material masters. Responsibility for implementation of SAP-PP application and its related interfaces with other modules (SD,CO,MM). Teco for process orders,Teco for sales orders. Continuous monitoring,updating & smoothening plans. Making delivery schedule as per the market situation & internal constraints. MRP, WIP & Warehouse management. Raising purchase requisition. Sr Executive –Process Control –Pratibha Syntex Ltd, Indore▪ Nov’2008 – Jan’2012 Barco sedo master planning for dyehouse. Welll aware of latest software related to shop floor management-Sedomaster SDM & TDH. Participate in various project like water,steam,power saving and process control. Have establish a system that can give >95% bulk to bulk results. Working on Lab to Bulk to achieve good RFT results. Aware of dyeing processes of different type of qualities like S/J,SJ Lycra,P/C,P/V,100% Viscose,100% Polyester and 100% Modal. Responsible for handling of Sedomaster & SDM process for processing. Cost optimization & trying out new product in process. Analyzing quality failures and finding out a solution for that. Solving out technical problems of processes and streamline production. Lab Officer–Pratibha Syntex Ltd, Indore▪ Jan’2005 – Nov’2008 Worked in spectrophotometer. Lab dipping and work on datacolor Ahiba,Automat,Mathis Production Officer–Pratibha Syntex Ltd, Indore▪ June’2003 – Dec’2005 Work with system implementation team in process house. Streamlining SAP implementation process in entire dyehouse.
- 2. Accomplishments SAP implementation in process house. Dyeing processes implementation through SDM & Sedomaster Barco technology. Was the part of Water reduction,Process loss reduction team. Worked with esteemed dyers of world as a part of innovation team. Be a part of cost cutting through innovation in dyehouse. Education M.B.A. NIBM Chennai Pursuing (2016) M.A. Rani Durgawati University,Jabalpur (2002) -2nd Div Diploma in Information System Management,Aptech (2000)- 2nd Div. B.Sc Rani Durgawati University,Jabalpur (1998) -2nd Div 12th MP Board,Bhopal (1994) -2nd Div 10th MP Board,Bhopal (1992) -2nd Div Personal Dossier Date of Birth : 30.04.1977 Marital Status : Married Passport : Yes Language : Hindi,English Present Salary: 50000 Rs/Month Present Address: 302/82A-Shanti Club View,Silicon City,RAU,INDORE,MP-452012. Permanent Address: Vill + PO-JIWARA,Teh-Vijayraghavgarh,Distt-KATNI MP-483775. Reason of Leave: For better career prospects.