Alp Arsalan Sabir is seeking a position in environment, health, safety, and quality management with over 27 years of experience. He is currently the Assistant Manager of EHSQMS at Schneider Electric Pakistan, where he implements integrated management systems, conducts audits and training, and reports on safety and quality indicators. Previously, he held EHSQMS roles at AREVA T&D Pakistan and Alstom T&D Pakistan, and has experience in quality assurance, calibration, and production from prior roles in industries including shipbuilding and manufacturing. He holds lead auditor certifications in ISO standards and a Green Belt in Six Sigma.

1. ALP
ARSALAN SABIR
Address: A- 241 Block “D” North Nazimabad Karachi. 74700 Pakistan
Mobile # +923003946755 Landline # +92 21234167168
Email: alp.arsalan@schneider-electric.com
arsalansabir@hotmail.com
Objective
Seeking a position in the field of “ENVIRONMENT HEALTH SAFETY QUALITY
MANAGEMENT SYSTEM” commensurate with my experience & qualification, in process industry,
mechanical/electrical/ manufacturing, ISO 14001, OHSAS 18001, ISO 900I Quality Assurance,
Environment, Health Safety, Production planning with Integrated Management System.
Professional Experience
27+ year’s professional experience in Switchgear Industry & General Engineering.
2011 to till date
Assistant Manager Head of Environment, Health Safety & Quality Management System
At Schneider Electric Pakistan, responsibilities are:
 Integrated QEHS Management systems implementation;
 Responsible for External Audits of the company for IMS Certification by certification bodies.
 Reports Health Safety & Environmental Indicators for CO2 Emissions, Energy, Water ,Waste,
LTDR,MIR ,Head Count in the SERE Schneider Electric Management Global Tool for entire
company.
 Reports Key Process Indicators (KPI) for entire company i.e cost of non quality CONQ,
Customer Complaints, Rework Hours, Manufacturing Defect rate (MDR), plant Return rate
(PRR), OTDS, Frequency of Accidents all the Energy utilities & paper consumption.
 Conduct QEHS Audits in entire company to monitor deviations and issue reports for
corrective & preventive action.
 Hazard identification & Risk Assessment and environment aspects and impacts
assessments of entire plant.
 Accident and incident investigation, and root-cause analysis, follow up corrective and
preventive action.
 Recording Near Misses & perform 8D analysis.
 Accident Monitoring through Green Cross sheet.
 Health and Safety regulatory frameworks, preparation and implementation.

2.  Conduct Safety Talk in SIM cycles for staff & worker.
 Inculcate Health safety Awareness to all for spreading safety culture throughout plant.
 Implement Blue LED light for safe working of PIT Power industrial Truck.
 Certification of Lifting Equipments & hoist in plant for accident free workplace.
 Trained & conduct 5S + 1S = 6S throughout plant.
 Safety Induction for visitor & customer for better understanding of safety in plant.
 Cascade LOTO lockout & tag out for testing teams.
 ERP electrical risk prevention certification of all commission personal.
 Train the entire work force for Health Safety & Environment to focus” ZERO” Accident in
Plant.
 Monitor & conduct Internal Quality Audits of entire company.
 Arrange Fire frightening & Evacuation drills for entire company.
 Monitor PTW for contactors.
 Kaizen for improvement in Safety & health.
 Conduct Management Review meetings for improvement in EHS of plant.
 Prepare and lead Energy Management projects.
2005 to 2011
Head of Environment, Health Safety & Quality Management System
At AREVA T&D Pakistan, responsibilities are:
 Integrated QEHS Management systems implementation;
 Responsible for External Audits of the company for IMS Certification by certification bodies.
 Hazard identification & Risk Assessment and environment aspects and impacts
assessments of entire plant.
 Accident and incident investigation, and root-cause analysis, follow up corrective and
preventive action.
 Recording Near Misses & perform 8D analysis.
 Accident Monitoring through Green Cross sheet.
 Health and Safety regulatory frameworks, preparation and implementation.
 Conduct Safety Talk in SIM cycles for staff & worker.
 Inculcate Health safety Awareness to all for spreading safety culture throughout plant.
 STAR & Dashboard Reporting for Environment, Health Safety.
2000 to 2005
Senior Engineer Quality Assurance & Calibration.
At ALSTOM T&D Pakistan, responsibilities were:
 Quality Management systems implementation;

3.  Responsible for Internal Audits of the company for QMS Certification by certification bodies.
 Quality Circles.
 Kaizen projects.
 Implementation & use of 7 Quality tools, Prato analysis, Histogram, pie charts, bar graphs.
 Eradicate Problem.
 Calibration of Electrical & Mechanical Instruments.
 Jigs Calibration.
1988 to 2000
Engineering Supervisor Quality Assurance & Design.
At Karachi Shipyard & Engineering works Limited., responsibilities were:
 Quality of Sheets & profiles as per DIN & ASTM.
 Inspection of Boiler tubes, sheets & furnace as per ASTM A106Gr B.
 Prepare Drawings of Water tube & fire tube boilers.
 Prepare BOQ,s.
 Material reservation.
 Indenting of materials.
 Problem solving.
 Inspection of boilers.
 Ship repair.
 ISO 9001 certification.
1986 to 1988
Supervisor Quality & Production.
At FILTRONA Pakistan Pvt. Limited., responsibilities were:
Quality Worked in Production & Quality Control Department responsible to check the production and
Quality of the Cigarettes which are manufacturing in the factory and prepare all the production reports
and Quality Sheets of the Shifts and also check all the materials which is used in making the filters eg.
Paper , Cellouse Acetate and Paper reels use in production.
Certifications / Trainings
 Lead Auditor Certification OHSAS 18001:2007
from Bureau Veritas Certification.
 Lead Auditor Certification ISO 14001:2004
from Bureau Veritas Certification.
 Lead Auditor Certification ISO 9001:2008
from Bureau Veritas Certification.

4.  Six Sigma Green Belt from Pakistan Institute of Quality
Control.
Education
 Bachelor of Technology ( BTech) Hons. 1st
Division, 2001.N.E.D. University of Engineering
& Technology, Karachi in Mechanical Technology.
 Bachelor of Technology ( BTech) Pass. 1st
Division, 1992.N.E.D. University of Engineering
& Technology, Karachi in Mechanical Technology.
 Diploma of Associate Engineer (D.A.E.)1st
class 1st
1986 Sind Board of Technical Education
Karachi in Mechanical Technology ( Power).
Professional Training
Introduction to ISO 9000:2000 by Sind Indus. Technical Estate Association of Industry, 2001.
ISO 9000-Quality Management & Quality Assurance Standards.
Internal Auditing of Management Systems, by DQS, 2005.
ERP Electrical Risk Prevention by Schneider Electric 2013.
Ergonomics Certification.
CSR Activities:
Installed Solar Panels in Jati & Thar Desert for BIP BOP Base of The Pyramid
Schneider Electric Foundation project win Global Bronze Trophy.
Trained Students Karigar Institute ,FESF & Behbood Foundation for Solar Energy & Health
Safety.
PERSONAL
Born 25th September 1965 Married, Muslim, Pakistan. Two Children.
Father’s Name is Prof. Dr. Muhammad Sabir Ph. D. (Turkology) from Istanbul, Turkey, Dean Faculty
of Arts & Commerce, Ex-Chairman Karachi University
Residential/Postal Address :A – 241 Block “D” North Nazimabad,
Karachi – Postal Code : 74700 - Pakistan
E – mail :arsalansabir@yahoo.com
arsalansabir@hotmail.com
Computer Literacy
Microsoft Power Point.

5. Microsoft Word.
Microsoft Excel & Lotus Notes 8.5

6. Microsoft Word.
Microsoft Excel & Lotus Notes 8.5