8. memory mapped I/O base 0x00000000c0400000, size 0x20000
memory mapped I/O base 0x00000000c0420000, size 0x20000
I/O base 0x0000000000000000, size 0x0
memory mapped I/O base 0x00000000c0440000, size 0x20000
memory mapped I/O base 0x00000000c0460000, size 0x20000
I/O base 0x0000000000000000, size 0x0
akfiler12>
akfiler12> software list
30801481.zip
RLM_FW.zip
7311P9_setup_q.exe
akfiler12> Wed Apr 25 18:19:26 AKDT [akfiler12:
snmp.agent.msg.access.denied:warning]: Permission denied for SNMPv3 requests
from PHSWAp375290. Reason: User does not exist.
Wed Apr 25 18:24:25 AKDT [akfiler12: snmp.agent.msg.access.denied:warning]:
Permission denied for SNMPv3 requests from PHSWAp375290. Reason: User does not
exist.
Wed Apr 25 18:29:26 AKDT [akfiler12: snmp.agent.msg.access.denied:warning]:
Permission denied for SNMPv3 requests from PHSWAp375290. Reason: User does not
exist.
akfiler12> software list
30801481.zip
RLM_FW.zip
7311P9_setup_q.exe
736_setup_q.exe
RLM_FW4.0.zip
akfiler12> software install RLM_FW4.0.zip
software: You can cancel this operation by hitting Ctrl-C in the next 6 seconds.
software: Depending on system load, it may take many minutes
software: to complete this operation. Until it finishes, you will
software: not be able to use the console.
software: installing software, this could take a few minutes...
software: installation of RLM_FW4.0.zip completed.
Wed Apr 25 18:32:52 AKDT [akfiler12: cmds.software.installDone:info]: Software:
Installation of RLM_FW4.0.zip was completed.
Please type 'rlm update' to load the new RLM firmware.
akfiler12> priv set advanced
Warning: These advanced commands are potentially dangerous; use
them only when directed to do so by Network Appliance
personnel.
akfiler12*> dow# # # ## # # ## # # #up# # # ## # # #rlm update -f
Updating the RLM firmware.
Please ensure you have run 'software install' command with correct parameters
for 'rlm update' prior to this step.
DO NOT reset this system during this process.
This might take about 27 mins...
New RLM version : 4.0
Current RLM version : 3.1P1
Sending files to RLM
............Wed Apr 25 18:34:26 AKDT [akfiler12:
snmp.agent.msg.access.denied:warning]: Permission denied for SNMPv3 requests
from PHSWAp375290. Reason: User does not exist.
............................................................Wed Apr 25 18:39:26
AKDT [akfiler12: snmp.agent.msg.access.denied:warning]: Permission denied for
SNMPv3 requests from PHSWAp375290. Reason: User does not exist.
...........................................
Installing package on RLM
.................Wed Apr 25 18:44:26 AKDT [akfiler12:
snmp.agent.msg.access.denied:warning]: Permission denied for SNMPv3 requests
from PHSWAp375290. Reason: User does not exist.
...........................................................Wed Apr 25 18:49:25
AKDT [akfiler12: snmp.agent.msg.access.denied:warning]: Permission denied for
9. SNMPv3 requests from PHSWAp375290. Reason: User does not exist.
.............................................................Wed Apr 25 18:54:26
AKDT [akfiler12: snmp.agent.msg.access.denied:warning]: Permission denied for
SNMPv3 requests from PHSWAp375290. Reason: User does not exist.
..................................................................Wed Apr 25
18:59:25 AKDT [akfiler12: snmp.agent.msg.access.denied:warning]: Permission
denied for SNMPv3 requests from PHSWAp375290. Reason: User does not exist.
Wed Apr 25 19:00:00 AKDT [akfiler12: kern.uptime.filer:info]: 7:00pm up 861
days, 9:31 59499918824 NFS ops, 4964584 CIFS ops, 2207 HTTP ops, 0 FCP ops, 0
iSCSI ops
................
RLM: Firmware updated successfully!
You need to reboot the RLM for the new image to take effect
NOTE : If your console connection is through the RLM,it will be disconnected
Do you want to reboot the RLM now? (y/n) :? y
login as: p375290
p375290@10.21.20.56's password:
RLM akfiler12> system conmsole# # # ## # # ## # # ## # # ## # # #sole
Type Ctrl-D to exit.
Data ONTAP (akfiler12.ak.providence.org)
login: p375290
Password:
Wed Apr 25 19:03:01 AKDT [akfiler12: rlm_console_login_m:info]: p375290 logged
in from RLM
akfiler12*>
akfiler12*> rlm status
Remote LAN Module Status: Offline
Part Number: 110-00057
Revision: G0
Serial Number: 912333
Firmware Version: 3.1P1
Mgmt MAC Address: 00:A0:98:12:1A:31
Ethernet Link: up
Using DHCP: no
IP Address: 10.21.20.56
Netmask: 255.255.255.0
Gateway: 10.21.20.1
akfiler12*> Verifying mailhost settings for RLM use...
akfiler12*> rlm status
Remote LAN Module Status: Online
Part Number: 110-00057
Revision: G0
Serial Number: 912333
Firmware Version: 4.0
Mgmt MAC Address: 00:A0:98:12:1A:31
Ethernet Link: up
Using DHCP: no
IP Address: 10.21.20.56
Netmask: 255.255.255.0
Gateway: 10.21.20.1
akfiler12*> storag eVerifying mailhost settings for RLM use...
# # # #
akfiler12*> storage download shelf
Wed Apr 25 19:04:10 AKDT [akfiler12: ses.shelf.fw.update.pfu.nrdnt:info]: SCSI
Enclosure Services (SES) shelf firmware update will be performed using Package
Firmware Update (PFU) due to not having redundant paths.
Downloading disk shelf firmware may take up to 10 minutes,
but will NOT disrupt client access during that time.
10. Are you sure you want to continue with shelf firmware update? y
akfiler12*> Wed Apr 25 19:04:13 AKDT [akfiler12:
sfu.ctrllerElmntsPerShelf:info]: [storage download shelf]: 2 ES controller
elements can be updated on 0a.shelf1.
Wed Apr 25 19:04:13 AKDT [akfiler12: sfu.ctrllerElmntsPerShelf:info]: [storage
download shelf]: 2 ES controller elements can be updated on 0b.shelf1.
Wed Apr 25 19:04:16 AKDT [akfiler12: sfu.downloadStarted:info]: Update of disk
shelf firmware started on 2 shelves.
Wed Apr 25 19:04:16 AKDT [akfiler12: sfu.downloadingController:info]: [storage
download shelf]: Downloading ESH4.1400.SFW on ES controller module A on
0a.shelf1.
Wed Apr 25 19:04:16 AKDT [akfiler12: sfu.downloadingController:info]: [storage
download shelf]: Downloading ESH4.1400.SFW on ES controller module B on
0b.shelf1.
Wed Apr 25 19:04:16 AKDT [akfiler12: sfu.downloadingController:info]: [storage
download shelf]: Downloading ESH4.1400.SFW on ES controller module B on
0b.shelf1.
Wed Apr 25 19:04:26 AKDT [akfiler12: snmp.agent.msg.access.denied:warning]:
Permission denied for SNMPv3 requests from PHSWAp375290. Reason: User does not
exist.
akfiler12*> [r# # # ## # # #pro# # # #iv set
akfiler12> sysconfig -a
NetApp Release 7.3.1.1P9: Thu Sep 17 11:19:53 PDT 2009
System ID: 0151729197 (akfiler12); partner ID: 0151729165 (akfiler13)
System Serial Number: 700000071691 (akfiler12)
System Rev: A0
System Storage Configuration: Multi-Path HA
slot 0: System Board 2.6 GHz (NetApp System Board XV A4)
Model Name: FAS3160
Part Number: 110-00119
Revision: A4
Serial Number: 734253
BIOS version: 4.2.0
Loader version: 1.6.1
Agent FW version: 3
Processors: 4
Processor ID: 0x40f13
Microcode Version: 0x0
Memory Size: 8192 MB
Memory Attributes: Node Interleaving
Bank Interleaving
Hoisting
Chipkill ECC
CMOS RAM Status: OK
Controller: A
Remote LAN Module Status: Online
Part Number: 110-00057
Revision: G0
Serial Number: 912333
Firmware Version: 4.0
Mgmt MAC Address: 00:A0:98:12:1A:31
Ethernet Link: up
Using DHCP: no
IP Address: 10.21.20.56
Netmask: 255.255.255.0
Gateway: 10.21.20.1
slot 0: Internal BGE 10/100 Ethernet Controller
e0M MAC Address: 00:a0:98:12:4c:aa (auto-unknown-cfg_down)
Device Type: BCM5703C_B0
memory mapped I/O base 0x00000000c0a00000, size 0x10000
slot 0: BGE 10/100/1000 Ethernet Controller
e0a MAC Address: 00:a0:98:12:4c:a8 (auto-1000t-fd-up)
e0b MAC Address: 00:a0:98:12:4c:a9 (auto-1000t-fd-up)
16. slot 4: Quad 10/100/1000 Ethernet Controller G20
e4a MAC Address: 00:15:17:c0:25:94 (auto-1000t-fd-up)
e4b MAC Address: 00:15:17:c0:25:95 (auto-1000t-fd-up)
e4c MAC Address: 00:15:17:c0:25:96 (auto-unknown-cfg_down)
e4d MAC Address: 00:15:17:c0:25:97 (auto-unknown-cfg_down)
Device Type: Rev 6, PBA D45774-008
memory mapped I/O base 0x00000000c0200000, size 0x20000
memory mapped I/O base 0x00000000c0220000, size 0x20000
I/O base 0x0000000000000000, size 0x0
memory mapped I/O base 0x00000000c0240000, size 0x20000
memory mapped Wed Apr 25 19:07:40 AKDT [akfiler12:
sfu.downloadingController:info]: [storage download shelf]: Downloading
ESH4.1400.SFW on ES controller module B on 0a.shelf1.
I/O base 0x00000000c0260000, size 0x20000
I/O base 0x0000000000000000, size 0x0
memory mapped I/O base 0x00000000c0400000, size 0x20000
memory mapped I/O base 0x00000000c0420000, size 0x20000
I/O base 0x0000000000000000, size 0x0
memory mapped I/O base 0x00000000c0440000, size 0x20000
memory mapped I/O base 0x00000000c0460000, size 0x20000
I/O base 0x0000000000000000, size 0x0
akfiler12> Wed Apr 25 19:07:43 AKDT [akfiler12: sfu.downloadingController:info]:
[storage download shelf]: Downloading ESH4.1400.SFW on ES controller module A on
0b.shelf1.
akfiler12> Wed Apr 25 19:09:26 AKDT [akfiler12:
snmp.agent.msg.access.denied:warning]: Permission denied for SNMPv3 requests
from PHSWAp375290. Reason: User does not exist.
Wed Apr 25 19:10:13 AKDT [akfiler12: useradmin.unauthorized.user:warning]: User
'PHSWAp375290' denied access - missing required capability: 'api-perf-object-
get-instances'
akfiler12> storage show disk -p
PRIMARY PORT SECONDARY PORT SHELF BAY
------- ---- --------- ---- ---------
0b.16 A 0c.16 B 1 0
0c.17 B 0b.17 A 1 1
0c.18 B 0b.18 A 1 2
0c.19 B 0b.19 A 1 3
0b.20 A 0c.20 B 1 4
0b.21 A 0c.21 B 1 5
0b.22 A 0c.22 B 1 6
0b.23 A 0c.23 B 1 7
0b.24 A 0c.24 B 1 8
0b.25 A 0c.25 B 1 9
0c.26 B 0b.26 A 1 10
0c.27 B 0b.27 A 1 11
0b.28 A 0c.28 B 1 12
0b.29 A 0c.29 B 1 13
0b.32 A 0c.32 B 2 0
0b.33 A 0c.33 B 2 1
0c.34 B 0b.34 A 2 2
0c.35 B 0b.35 A 2 3
0c.36 B 0b.36 A 2 4
0b.37 A 0c.37 B 2 5
0b.38 A 0c.38 B 2 6
0b.39 A 0c.39 B 2 7
0b.40 A 0c.40 B 2 8
0c.41 B 0b.41 A 2 9
0c.42 B 0b.42 A 2 10
0b.43 A 0c.43 B 2 11
0b.44 A 0c.44 B 2 12
0c.45 B 0b.45 A 2 13
0a.16 A 0d.16 B 1 0
17. 0a.17 A 0d.17 B 1 1
0d.18 B 0a.18 A 1 2
0d.19 B 0a.19 A 1 3
0d.20 B 0a.20 A 1 4
0a.21 A 0d.21 B 1 5
0d.22 B 0a.22 A 1 6
0d.23 B 0a.23 A 1 7
0d.24 B 0a.24 A 1 8
0a.25 A 0d.25 B 1 9
0a.26 A 0d.26 B 1 10
0d.27 B 0a.27 A 1 11
0a.28 A 0d.28 B 1 12
0d.29 B 0a.29 A 1 13
0d.32 B 0a.32 A 2 0
0d.33 B 0a.33 A 2 1
0a.34 A 0d.34 B 2 2
0a.35 A 0d.35 B 2 3
0a.36 A 0d.36 B 2 4
0a.37 A 0d.37 B 2 5
0a.38 A 0d.38 B 2 6
0d.39 B 0a.39 A 2 7
0a.40 A 0d.40 B 2 8
0d.41 B 0a.41 A 2 9
0a.42 A 0d.42 B 2 10
0d.43 B 0a.43 A 2 11
0d.44 B 0a.44 A 2 12
0a.45 A 0d.45 B 2 13
akfiler12> Wed Apr 25 19:10:13 AKDT [akfiler12:
useradmin.unauthorized.user:warning]: User 'PHSWAp375290' denied access -
missing required capability: 'api-perf-object-get-instances'
Wed Apr 25 19:11:04 AKDT [akfiler12: sfu.downloadSuccess:info]: [storage
download shelf]: Firmware file ESH4.1400.SFW downloaded on 0a.shelf1.
Wed Apr 25 19:11:10 AKDT [akfiler12: sfu.downloadSuccess:info]: [storage
download shelf]: Firmware file ESH4.1400.SFW downloaded on 0b.shelf1.
Wed Apr 25 19:11:10 AKDT [akfiler12: sfu.downloadSummary:info]: Shelf firmware
updated on 2 shelves.
sysstat -c 10 -x 3
CPU NFS CIFS HTTP Total Net kB/s Disk kB/s Tape kB/s Cache Cache
CP CP Disk FCP iSCSI FCP kB/s iSCSI kB/s
in out read write read write age hit
time ty util in out in out
3% 359 0 0 359 5826 361 484 8 0 0 4 100%
0% - 4% 0 0 0 0 0 0
5% 360 0 0 360 7669 282 307 11 0 0 9 100%
0% - 4% 0 0 0 0 0 0
5% 364 0 0 364 3167 366 6481 12653 0 0 9 100%
34% Tf 7% 0 0 0 0 0 0
5% 349 0 0 349 5158 198 1725 20205 0 0 9 100%
61% : 9% 0 0 0 0 0 0
6% 443 0 0 443 7419 5779 1907 11 0 0 9 100%
0% - 5% 0 0 0 0 0 0
3% 349 0 0 349 2529 442 708 8 0 0 9 99%
0% - 5% 0 0 0 0 0 0
4% 366 1 0 367 2378 216 4572 1241 0 0 9 99%
6% Tf 4% 0 0 0 0 0 0
5% 475 0 0 475 2830 5180 3320 29203 0 0 9 99%
68% : 9% 0 0 0 0 0 0
3% 370 1 0 371 4231 197 360 11 0 0 9 100%
0% - 4% 0 0 0 0 0 0
3% 347 3 0 350 2363 338 260 11 0 0 9 99%
0% - 3% 0 0 0 0 0 0
akfiler12> software install 736_setup_q.exe
software: You can cancel this operation by hitting Ctrl-C in the next 6 seconds.
software: Depending on system load, it may take many minutes
18. software: to complete this operation. Until it finishes, you will
software: not be able to use the console.
software: installing software, this could take a few minutes...
Wed Apr 25 19:14:26 AKDT [akfiler12: snmp.agent.msg.access.denied:warning]:
Permission denied for SNMPv3 requests from PHSWAp375290. Reason: User does not
exist.
software: installation of 736_setup_q.exe completed.
Wed Apr 25 19:14:32 AKDT [akfiler12: cmds.software.installDone:info]: Software:
Installation of 736_setup_q.exe was completed.
Please type "download" to load the new software,
and "reboot" subsequently for the changes to take effect.
akfiler12> download
download: Reminder: upgrade both the nodes in the Cluster
download: Reminder: You may need to upgrade Volume SnapMirror destination
download: filers associated with this filer. Volume SnapMirror can not mirror
download: if the version of ONTAP on the source filer is newer than that on
download: the destination filer.
download: You can cancel this operation by hitting Ctrl-C in the next 6 seconds.
download: Depending on system load, it may take many minutes
download: to complete this operation. Until it finishes, you will
download: not be able to use the console.
Wed Apr 25 19:14:52 AKDT [akfiler12: download.request:notice]: Operator
requested download initiated
download: Downloading boot device
download: If upgrading from a version of Data ONTAP prior to 7.3, please ensure
download: there is at least 3% of available space on each aggregate before
download: upgrading. Additional information can be found in the release notes.
..Wed Apr 25 19:15:13 AKDT [akfiler12: useradmin.unauthorized.user:warning]:
User 'PHSWAp375290' denied access - missing required capability: 'api-perf-
object-get-instances'
......Wed Apr 25 19:15:13 AKDT [akfiler12: useradmin.unauthorized.user:warning]:
User 'PHSWAp375290' denied access - missing required capability: 'api-perf-
object-get-instances'
.........
download: Downloading boot device (Service Area)
......Wed Apr 25 19:18:12 AKDT [akfiler12: useradmin.unauthorized.user:warning]:
User 'PHSWAp375290' denied access - missing required capability: 'api-perf-
object-get-instances'
...........
akfiler12> Wed Apr 25 19:19:14 AKDT [akfiler12: download.requestDone:notice]:
Operator requested download completed
akfiler12> version -b
1:/x86_64/kernel/primary.krn: OS 7.3.6
1:/backup/x86_64/kernel/primary.krn: OS 7.3.1.1P9
1:/x86_64/diag/diag.krn: 5.5.2
1:/x86_64/firmware/excelsio/firmware.img: Firmware 1.9.0
1:/x86_64/firmware/DrWho/firmware.img: Firmware 2.5.0
1:/x86_64/firmware/SB_XV/firmware.img: Firmware 4.4.0
1:/boot/loader: Loader 1.8
1:/common/firmware/zdi/zdi_fw.zpk: Flash Cache Firmware 2.2 (Build
0x201012201350)
1:/common/firmware/zdi/zdi_fw.zpk: PAM II Firmware 1.10 (Build 0x201012200653)
1:/common/firmware/zdi/zdi_fw.zpk: X1936A FPGA Configuration PROM 1.0 (Build
0x200706131558)
akfiler12> Wed Apr 25 19:19:27 AKDT [akfiler12:
snmp.agent.msg.access.denied:warning]: Permission denied for SNMPv3 requests
from PHSWAp375290. Reason: User does not exist.
Wed Apr 25 19:23:12 AKDT [akfiler12: useradmin.unauthorized.user:warning]: User
'PHSWAp375290' denied access - missing required capability: 'api-perf-object-
counter-list-info'
19. Wed Apr 25 19:24:26 AKDT [akfiler12: snmp.agent.msg.access.denied:warning]:
Permission denied for SNMPv3 requests from PHSWAp375290. Reason: User does not
exist.