Atomic Force Microscopes and AFM Systems manufactured by AFMWorkshop are designed with the essential scanning features for obtaining high-quality AFM images at high resolution, along with a flexible scanning software developed in Labview.
KEMET Webinar - KEMET E2Di - The ultimate guide to KEMET digital toolsIvana Ivanovska
Become an expert on doing quick searches to find the right ceramic part for your design, create plots for capacitance, ESR and other electrical properties, and estimate aging effect on ceramic capacitors
The document describes a portable atomic force microscope called the PnP AFM developed by ASENSIS Nanotechnology. It uses quartz crystal sensor technology, has a low cost of $15,000, and features plug and play operation with no training required and easy sensor replacement.
As an leading supplier of Scientific Instruments, Angstrom Advanced has extensive experiences in designing, manufacturing, building and installing a variety of Scientific Instruments; especially Ellipsometer, AA2000 Atomic Force Microscope, AA5000 Multi-function SPM Systems, AA8000 Multi-function SEM System, Gas Generators, X-ray Diffractometer, etc
The document summarizes an atomic force microscope system called the AcademiaTM. It provides high quality imaging in real time using a simple and elegant design. The complete package includes an AFM controller, LabVIEW software, computer and microscope for a low price while maintaining reliability, simplicity and affordability. It is easy to use and supports various imaging modes and probe types.
PerkinElmer Spotlight™ FT-IR, NIR Microscopy and Imaging Systems are built to the highest ISO-9001 manufacturing standards.
This document presents technical information and typical performance specifications based on factory tests.
The Spotlight systems take the proven and popular IR microscopy technique and add a new level of speed and applications capability. Spotlight systems incorporate high performance detectors, which deliver the ultimate in sensitivity, out-performing competitive top-of-the line IR microscopy systems. The revolutionary imaging capabilities enable previously time-consuming and difficult chemical composition studies to be performed without compromising data quality.
PerkinElmer Spotlight™ FT-IR Microscopy Systems are built to the highest ISO-9001 manufacturing standards. This document presents technical information and typical performance specifications based on factory tests.
The Spotlight systems take the proven and popular IR microscopy technique and add a new level of performance, automation and add applications capability. Spotlight 150i and 200i systems can be configured from a range of FT-IR, detector and microscope stage options to best suit the application requirement.
The Spotlight150i and 200i systems can be configured with either Spectrum Two or Frontier FT-IR instruments; in addition
Spectrum 100, 400 and Spectrum One FT-IR systems are upgradeable to Spotlight 150i/200i systems.
The document provides specifications for the Spotlight 150i and 200i FT-IR Microscopy Systems. The Spotlight 150i is designed for everyday infrared microscopy with features like automatic illumination and aperture control. The Spotlight 200i adds automated mapping and imaging capabilities for applications like single point microscopy and small area analysis. Both systems can be configured with different microscope stages, detectors, and FT-IR instruments to best suit the user's needs and applications.
KEMET Webinar - KEMET E2Di - The ultimate guide to KEMET digital toolsIvana Ivanovska
Become an expert on doing quick searches to find the right ceramic part for your design, create plots for capacitance, ESR and other electrical properties, and estimate aging effect on ceramic capacitors
The document describes a portable atomic force microscope called the PnP AFM developed by ASENSIS Nanotechnology. It uses quartz crystal sensor technology, has a low cost of $15,000, and features plug and play operation with no training required and easy sensor replacement.
As an leading supplier of Scientific Instruments, Angstrom Advanced has extensive experiences in designing, manufacturing, building and installing a variety of Scientific Instruments; especially Ellipsometer, AA2000 Atomic Force Microscope, AA5000 Multi-function SPM Systems, AA8000 Multi-function SEM System, Gas Generators, X-ray Diffractometer, etc
The document summarizes an atomic force microscope system called the AcademiaTM. It provides high quality imaging in real time using a simple and elegant design. The complete package includes an AFM controller, LabVIEW software, computer and microscope for a low price while maintaining reliability, simplicity and affordability. It is easy to use and supports various imaging modes and probe types.
PerkinElmer Spotlight™ FT-IR, NIR Microscopy and Imaging Systems are built to the highest ISO-9001 manufacturing standards.
This document presents technical information and typical performance specifications based on factory tests.
The Spotlight systems take the proven and popular IR microscopy technique and add a new level of speed and applications capability. Spotlight systems incorporate high performance detectors, which deliver the ultimate in sensitivity, out-performing competitive top-of-the line IR microscopy systems. The revolutionary imaging capabilities enable previously time-consuming and difficult chemical composition studies to be performed without compromising data quality.
PerkinElmer Spotlight™ FT-IR Microscopy Systems are built to the highest ISO-9001 manufacturing standards. This document presents technical information and typical performance specifications based on factory tests.
The Spotlight systems take the proven and popular IR microscopy technique and add a new level of performance, automation and add applications capability. Spotlight 150i and 200i systems can be configured from a range of FT-IR, detector and microscope stage options to best suit the application requirement.
The Spotlight150i and 200i systems can be configured with either Spectrum Two or Frontier FT-IR instruments; in addition
Spectrum 100, 400 and Spectrum One FT-IR systems are upgradeable to Spotlight 150i/200i systems.
The document provides specifications for the Spotlight 150i and 200i FT-IR Microscopy Systems. The Spotlight 150i is designed for everyday infrared microscopy with features like automatic illumination and aperture control. The Spotlight 200i adds automated mapping and imaging capabilities for applications like single point microscopy and small area analysis. Both systems can be configured with different microscope stages, detectors, and FT-IR instruments to best suit the user's needs and applications.
This document provides an overview of imaging and microscopy products offered by LOT-QuantumDesign GmbH including near infrared and infrared cameras, high-speed cameras, pulse thermography systems, Phenom desktop scanning electron microscopes, sputter coaters, sample management for in-situ TEM, hyperspectral imaging systems, large format CCD and CMOS cameras, and physical imaging cameras from Andor Technology. It also describes light sources, photovoltaics testing equipment, laser diagnostics and modulation tools, power meters, and particle size analyzers. Finally, it lists cryogenic equipment like the Physical Property Measurement System (PPMS), PPMS-DynaCool, helium liquefiers, and the Magnetic Property Measurement System
KML is well equipped with sophisticated apparatus managed by our veteran professionals, Catering to your quality certification and assurance requirements.
The document summarizes the history and capabilities of Gamry Instruments, a company that designs and manufactures electrochemical instrumentation. Some key points:
- Gamry was founded in 1989 and has focused on innovation, performance, and reliability to meet customer needs. They introduced the first potentiostat integrated into a computer and pioneered floating and sub-harmonic sampling techniques.
- Gamry offers a range of potentiostats including the high-performance Reference series and more affordable Interface 1000. Their instruments are suitable for applications like corrosion testing, coatings evaluation, and energy research.
- In addition to standard electrochemical techniques, Gamry potentiostats feature accurate impedance spectroscopy, custom experiment capabilities, and
AWgage-150 measures sheet resistance in ohms per square or milliohms per square. If specific resistivity is known, the thickness of the deposited film layer can be computed from the sheet resistance. The choice of measurement data is easily get in the software. AWgage-150 can accommodate 150mm (6″) wafers as well as the standard 2″, 3″,4″, 5″ wafers without any hardware change.
Allwin21 AWgage-150 Features:
30 years proven Eddy Sheet Resistance Measurement technologies.
Non-contact Sheet Resistance Measurement technologies.
1mΩ/square to 19,990 Ω/square measurement range capability
Touch Screen Monitor and PC w/ Advanced Allwin21 control software.
Wafer carriage travel programmed with internal encoder step motor , without encoder disk.
Consistent wafer-to-wafer process cycle repeatability.
Small footprint and energy efficiency.
Made in U.S.A.
Specifications:
Test Sights: Single center-point, 5-point, or 9-point.5-9
Highly Conductive or Metal Sheet Resistance:
1 to 1,999 mΩ/square
1 to 1,999 Ω/square
Or
10 to 19,990 Ω/square
Highly Conductive or Metal Film ThicknessMinimum: 100 ÅngströmMaximum: Proportional to resistivity. Maximum for a resistivity of 2.7 mW-cm is 270 kÅ (27 mm
Introduction of SS-X Solar Simulator
Original link:https://enlitechnology.com/home/products/light-simulator/ss-x-solar-simulator/
*About Enlitech
Enlitech was founded in March 2009.
The core technologies include artificial light source and spectrum analyzing technique.Enlitech’s four main product markets include image sensor testing solutions, advanced photoelectric detector testing systems, quantum efficiency test solutions, and various light simulators.
Our popular products are QER and SS-X solar simulator. If you are interested, please visit the official website to understand more!
https://enlitechnology.com/
“Conation Technologies” are committed to offer quality control lab equipment like Metallurgical
and Mechanical Testing Machines to our customers with latest and best technologies at affordable prices.
Our product range includes Metallurgical Microscopes, Universal Microscopes, Portable Microscopes,
Stereozooms, Metallurgical Image Analyzer, Image Analyzers for welding analysis, fibre analysis,
clinker analysis etc., Cleanliness (Millipore Filter Paper) Analysis System, Microhardness Testers,Metallurgical Sample Preparation Machines, Mechanical Testing Machines,Jominy End Quench Test set-up, and Special Purpose Machines.
The Stroboscope was invented and improved upon by H. E. Edgerton starting in 1931. Weiber's Stroboscope is
ideal equipment for research and general applications in field of study of moving objects. Our Stroboscope is an
optical instrument that makes equipment appear to be slow or still.
I designed and built this near-field optical microscope- first version for Actoprobe LLC. The microscope is a combination of confocal and AFM. The measured resolution of the microscope is about 20nm. I will build more version of it in near future.
AA3000 Scanning Probe Microscope is our most popular model. This unit is tailored towards research and industry applications, where the user is required to perform rapid and simple analysis. The detector is built directly into the base, eliminating the chance of damaging it through handling. AA3000 is capable of performing contact mode, tapping mode, lateral force microscopy and scanning tunneling microscopy.
The document describes OPIMsoft's OFFPIPE Assistant Toolbox software for offshore pipeline S-lay design. It allows users to build detailed laybarge and stinger models, run finite element analyses to optimize pipeline bending radius and tension for minimum stress, and output optimized parameters, analysis results and charts. The toolbox includes modules for model building, analysis, parameter optimization, converting stress-strain curves and simulating wave spectra. It aims to improve on traditional manual S-lay design methods.
The document discusses Lumenis' LumeProbe product line of ophthalmic laser probes. It summarizes that the LumeProbes are designed to deliver laser energy safely and efficiently for retinal treatments, offering consistent laser spots and optimized energy transmission without the need for adapters. They provide reliability, a wide selection of probe types, and benefits for smaller gauge sizes.
Vacuum precision positioning systems brochureJohn Mike
The document discusses PI miCos' expertise in designing precision positioning systems for vacuum environments. It provides details on their capabilities for designing stages that can operate down to ultra-high vacuum levels of 10-9 mbar. It also discusses the various design considerations and customized solutions they can provide for applications in vacuum.
Presented at the CMM Knowledge Tour 2013, discover the many end-user benefits of the Renishaw SP25M.
Attendees of the CMM Knowledge Tour discovered the dual capability of the SP25M, providing both scanning probe and touch trigger probe features.
For more information, please visit http://www.cmmxyz.com/12
Allwin21 Corp. has been focusing on providing solutions and enhancements to Tegal 901e, Tegal 903e, Tegal 901e TTW, Tegal 903e TTW,Lam AutoEtch 490 ,Lam AutoEtch 590, Lam AutoEtch 690, Lam AutoEtch 790 ,Lam Rainbow 44XX, 45XX, 46XX,47XX Series , Gasonics Aura 1000, Gasonics Aura 2000LL, Gasonics Aura 3010, Gasonics L3510 ,,Matrix 105, Matrix 105R, Matrix 205, Matrix 10 (1104, 1107, 1108), Matrix 303,Matrix 403 ,Matrix 10(1303, 1307), Branson/IPC 3000, Branson/IPC L3200 used Plasma Asher, Plasma Descum,plasma Etch, RIE semiconductor process equipment. These OEM Etch RIE semiconductor equipment have been used in productions and R&D since 1990′s. They have been proven to be a true “work horse”. Allwin21 Corp. can customize these OEM systems with Allwin21′s comparable integrated process control system with PC, solid robotic wafer transfer system (Video) and new critical components to achieve the goal of giving our customers a production edge with right cost.
This document is a newsletter from Premier Ophthalmic promoting various ophthalmic equipment and supplies. It includes reviews and advertisements for Marco lane equipment like slit lamps, lensmeters, and exam chairs. It also promotes the new Canon CR-2 AF retinal camera with auto-focus features and a special promotional price. Additionally, it provides information on Reichert's ORA gaining a new CPT code and introduces a new online quick reference ordering guide for supplies.
THIS EDITION OF THE PREMIER TIMES IS 50% BIGGER! Includes everything you’ll need to know about the Canon CR-2 AF, Reichert ORA and vRX & we even throw in a price match guarantee! Don't forget to checkout our crossword!
Fischer X-ray Fluorescence (XRF) measuring devices are continuously optimized to achieve higher precision in shorter
measurement times. That is why we have developed our new digital pulse processor DPP+ completely in-house.
The DPP+ is one of the central elements of an X-ray fluorescence spectromete.
Nanonics produces atomic force microscopy (AFM) systems that provide singular excellence in structural and functional imaging for biology. Their systems feature unique glass probes that do not obscure the optical axis and allow transparent integration with microscopes. Nanonics' tuning fork feedback provides unprecedented force sensitivity down to the mechanical force of a single photon. This allows true non-contact imaging and switching between AFM and STM feedback with the same probe. Nanonics systems are capable of imaging previously impossible structures like microvilli in live cells.
The RA802 Pharmaceutical Analyser combines Renishaw's proprietary LiveTrackTM and StreamLineTM technologies to generate chemical images up to 150 times faster than conventional methods, whilst maintaining focus ? ensuring high quality pharmaceutical tablet imaging.
Gender and Mental Health - Counselling and Family Therapy Applications and In...PsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
This document provides an overview of imaging and microscopy products offered by LOT-QuantumDesign GmbH including near infrared and infrared cameras, high-speed cameras, pulse thermography systems, Phenom desktop scanning electron microscopes, sputter coaters, sample management for in-situ TEM, hyperspectral imaging systems, large format CCD and CMOS cameras, and physical imaging cameras from Andor Technology. It also describes light sources, photovoltaics testing equipment, laser diagnostics and modulation tools, power meters, and particle size analyzers. Finally, it lists cryogenic equipment like the Physical Property Measurement System (PPMS), PPMS-DynaCool, helium liquefiers, and the Magnetic Property Measurement System
KML is well equipped with sophisticated apparatus managed by our veteran professionals, Catering to your quality certification and assurance requirements.
The document summarizes the history and capabilities of Gamry Instruments, a company that designs and manufactures electrochemical instrumentation. Some key points:
- Gamry was founded in 1989 and has focused on innovation, performance, and reliability to meet customer needs. They introduced the first potentiostat integrated into a computer and pioneered floating and sub-harmonic sampling techniques.
- Gamry offers a range of potentiostats including the high-performance Reference series and more affordable Interface 1000. Their instruments are suitable for applications like corrosion testing, coatings evaluation, and energy research.
- In addition to standard electrochemical techniques, Gamry potentiostats feature accurate impedance spectroscopy, custom experiment capabilities, and
AWgage-150 measures sheet resistance in ohms per square or milliohms per square. If specific resistivity is known, the thickness of the deposited film layer can be computed from the sheet resistance. The choice of measurement data is easily get in the software. AWgage-150 can accommodate 150mm (6″) wafers as well as the standard 2″, 3″,4″, 5″ wafers without any hardware change.
Allwin21 AWgage-150 Features:
30 years proven Eddy Sheet Resistance Measurement technologies.
Non-contact Sheet Resistance Measurement technologies.
1mΩ/square to 19,990 Ω/square measurement range capability
Touch Screen Monitor and PC w/ Advanced Allwin21 control software.
Wafer carriage travel programmed with internal encoder step motor , without encoder disk.
Consistent wafer-to-wafer process cycle repeatability.
Small footprint and energy efficiency.
Made in U.S.A.
Specifications:
Test Sights: Single center-point, 5-point, or 9-point.5-9
Highly Conductive or Metal Sheet Resistance:
1 to 1,999 mΩ/square
1 to 1,999 Ω/square
Or
10 to 19,990 Ω/square
Highly Conductive or Metal Film ThicknessMinimum: 100 ÅngströmMaximum: Proportional to resistivity. Maximum for a resistivity of 2.7 mW-cm is 270 kÅ (27 mm
Introduction of SS-X Solar Simulator
Original link:https://enlitechnology.com/home/products/light-simulator/ss-x-solar-simulator/
*About Enlitech
Enlitech was founded in March 2009.
The core technologies include artificial light source and spectrum analyzing technique.Enlitech’s four main product markets include image sensor testing solutions, advanced photoelectric detector testing systems, quantum efficiency test solutions, and various light simulators.
Our popular products are QER and SS-X solar simulator. If you are interested, please visit the official website to understand more!
https://enlitechnology.com/
“Conation Technologies” are committed to offer quality control lab equipment like Metallurgical
and Mechanical Testing Machines to our customers with latest and best technologies at affordable prices.
Our product range includes Metallurgical Microscopes, Universal Microscopes, Portable Microscopes,
Stereozooms, Metallurgical Image Analyzer, Image Analyzers for welding analysis, fibre analysis,
clinker analysis etc., Cleanliness (Millipore Filter Paper) Analysis System, Microhardness Testers,Metallurgical Sample Preparation Machines, Mechanical Testing Machines,Jominy End Quench Test set-up, and Special Purpose Machines.
The Stroboscope was invented and improved upon by H. E. Edgerton starting in 1931. Weiber's Stroboscope is
ideal equipment for research and general applications in field of study of moving objects. Our Stroboscope is an
optical instrument that makes equipment appear to be slow or still.
I designed and built this near-field optical microscope- first version for Actoprobe LLC. The microscope is a combination of confocal and AFM. The measured resolution of the microscope is about 20nm. I will build more version of it in near future.
AA3000 Scanning Probe Microscope is our most popular model. This unit is tailored towards research and industry applications, where the user is required to perform rapid and simple analysis. The detector is built directly into the base, eliminating the chance of damaging it through handling. AA3000 is capable of performing contact mode, tapping mode, lateral force microscopy and scanning tunneling microscopy.
The document describes OPIMsoft's OFFPIPE Assistant Toolbox software for offshore pipeline S-lay design. It allows users to build detailed laybarge and stinger models, run finite element analyses to optimize pipeline bending radius and tension for minimum stress, and output optimized parameters, analysis results and charts. The toolbox includes modules for model building, analysis, parameter optimization, converting stress-strain curves and simulating wave spectra. It aims to improve on traditional manual S-lay design methods.
The document discusses Lumenis' LumeProbe product line of ophthalmic laser probes. It summarizes that the LumeProbes are designed to deliver laser energy safely and efficiently for retinal treatments, offering consistent laser spots and optimized energy transmission without the need for adapters. They provide reliability, a wide selection of probe types, and benefits for smaller gauge sizes.
Vacuum precision positioning systems brochureJohn Mike
The document discusses PI miCos' expertise in designing precision positioning systems for vacuum environments. It provides details on their capabilities for designing stages that can operate down to ultra-high vacuum levels of 10-9 mbar. It also discusses the various design considerations and customized solutions they can provide for applications in vacuum.
Presented at the CMM Knowledge Tour 2013, discover the many end-user benefits of the Renishaw SP25M.
Attendees of the CMM Knowledge Tour discovered the dual capability of the SP25M, providing both scanning probe and touch trigger probe features.
For more information, please visit http://www.cmmxyz.com/12
Allwin21 Corp. has been focusing on providing solutions and enhancements to Tegal 901e, Tegal 903e, Tegal 901e TTW, Tegal 903e TTW,Lam AutoEtch 490 ,Lam AutoEtch 590, Lam AutoEtch 690, Lam AutoEtch 790 ,Lam Rainbow 44XX, 45XX, 46XX,47XX Series , Gasonics Aura 1000, Gasonics Aura 2000LL, Gasonics Aura 3010, Gasonics L3510 ,,Matrix 105, Matrix 105R, Matrix 205, Matrix 10 (1104, 1107, 1108), Matrix 303,Matrix 403 ,Matrix 10(1303, 1307), Branson/IPC 3000, Branson/IPC L3200 used Plasma Asher, Plasma Descum,plasma Etch, RIE semiconductor process equipment. These OEM Etch RIE semiconductor equipment have been used in productions and R&D since 1990′s. They have been proven to be a true “work horse”. Allwin21 Corp. can customize these OEM systems with Allwin21′s comparable integrated process control system with PC, solid robotic wafer transfer system (Video) and new critical components to achieve the goal of giving our customers a production edge with right cost.
This document is a newsletter from Premier Ophthalmic promoting various ophthalmic equipment and supplies. It includes reviews and advertisements for Marco lane equipment like slit lamps, lensmeters, and exam chairs. It also promotes the new Canon CR-2 AF retinal camera with auto-focus features and a special promotional price. Additionally, it provides information on Reichert's ORA gaining a new CPT code and introduces a new online quick reference ordering guide for supplies.
THIS EDITION OF THE PREMIER TIMES IS 50% BIGGER! Includes everything you’ll need to know about the Canon CR-2 AF, Reichert ORA and vRX & we even throw in a price match guarantee! Don't forget to checkout our crossword!
Fischer X-ray Fluorescence (XRF) measuring devices are continuously optimized to achieve higher precision in shorter
measurement times. That is why we have developed our new digital pulse processor DPP+ completely in-house.
The DPP+ is one of the central elements of an X-ray fluorescence spectromete.
Nanonics produces atomic force microscopy (AFM) systems that provide singular excellence in structural and functional imaging for biology. Their systems feature unique glass probes that do not obscure the optical axis and allow transparent integration with microscopes. Nanonics' tuning fork feedback provides unprecedented force sensitivity down to the mechanical force of a single photon. This allows true non-contact imaging and switching between AFM and STM feedback with the same probe. Nanonics systems are capable of imaging previously impossible structures like microvilli in live cells.
The RA802 Pharmaceutical Analyser combines Renishaw's proprietary LiveTrackTM and StreamLineTM technologies to generate chemical images up to 150 times faster than conventional methods, whilst maintaining focus ? ensuring high quality pharmaceutical tablet imaging.
Similar to AFMWorkshop -atomic-force-microscopes. (20)
Gender and Mental Health - Counselling and Family Therapy Applications and In...PsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) CurriculumMJDuyan
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
How to Setup Warehouse & Location in Odoo 17 InventoryCeline George
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Chapter wise All Notes of First year Basic Civil Engineering.pptxDenish Jangid
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
Leveraging Generative AI to Drive Nonprofit InnovationTechSoup
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UPRAHUL
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
Temple of Asclepius in Thrace. Excavation resultsKrassimira Luka
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
2. AFM
Workshop
Atomic Force Microscopes
Atomic Force Microscopes and AFM Systems manufactured by
AFMWorkshop are designed with the essential scanning
features for obtaining high-quality AFM images
at high resolution, along with a flexible scanning
software developed in LabVIEW.
4. AFM
Workshop
Basic Atomic Force Microscope For
routine scanning and education
The B-AFM is a complete system that includes a computer with
software, a stage, and control electronics; everything needed
for AFM scanning.
For scientists and engineers with bigger ideas than budgets.
5. AFM
Workshop
Table Top Atomic Force Microscope For
demanding applications
This compact, second generation high resolution tabletop Atomic Force
Microscope (AFM)
Has all the important features and benefits expected from a light lever
AFM.
The TT-2 AFM includes a stage, control electronics, probes, manuals, and
a video microscope.
6. AFM
Workshop
Nano-Profiling AFM For process control
and development
The NP-AFM is a nanoprofiler for analysis of features such as
surface roughness and metrology of technical samples.
Primary applications for the NP-AFM include process development
and process control of technical samples.
7. AFM
Workshop
Life Sciences AFM For soft-sample
applications
The LS-AFM is used in life sciences applications when an inverted optical
microscope is required for locating cells or other bio-materials on a
surface.
The LS-AFM can be retrofitted to almost any inverted optical microscope,
or it can be purchased with the AFMWorkshop inverted optical
microscope.
8. AFM
Workshop
Standalone AFM: Open design for
maximum flexibility
Because the probe on the SA-AFM extends below the stage structure
the SA-AFM is capable of scanning all sizes and shapes of samples.
The SA-AFM includes a direct drive Z approach motor, high resolution
on axis video microscope, linearize pizo XYZ scanner, and an industry
standard light lever.
10. AFM
Workshop
Contact Us
AFMWorkshop Provides a 100% Money Back Guarantee
If our AFMs can't run your application, we will refund the full purchase
price!
Additionally, our AFMs are now backed by a two-year, return-to-factory
warranty.
Contact us to take advantage of this offer (888)671-5539 or visit
www.afmworkshop.com.