The SRST series shunt regulators are designed to work with regenerative servo drives to dissipate excess energy during braking, preventing the drive from shutting off due to overvoltage. They connect a power resistor across the DC bus to dissipate energy when the bus voltage reaches the shunt voltage setting. Models are available with different shunt voltage ratings and capacitor sizes to accommodate drives up to 400 volts.
M pact new air circuit breaker 400-4000 atwinkleerai
Electrical air circuit breaker is a switching device which can be operated manually as well as automatically for controlling and protection of electrical power system respectively. Air circuit breaker, is the kind of circuit breaker which operates in air at atmospheric pressure.
CÔNG TY CỔ PHẦN THIẾT BỊ ĐIỆN HOÀNG PHƯƠNG
Địa chỉ: Số 10, ngõ 44, phố Võ Thị Sáu, P.Thanh Nhàn, Q.Hai Bà Trưng, TP. Hà Nội
MST: 0106798886
Điện thoại: 024.3215.1322
Website : Hoangphuongjsc.com
Phone/Zalo : 0944 240 317 / Kinhdoanh1.hpe@gmail.com
Phone/Zalo : 0975 123 698 / Kinhdoanh2.hpe@gmail.com
Phone/Zalo : 0961 008 858 / Kinhdoanh3.hpe@gmail.com
OM SWITCHGEAR AND ELECTRICALS is prominent manufacturer and trader of Electrical Control Panel, Electrical Switchgear, Pump, Motor, and Cables. Our products are well appreciated all over India for their quality. We are supported by a transport and packaging facility which helps us in keeping our electrical products safely while ensuring uninterrupted dispatch.
M pact new air circuit breaker 400-4000 atwinkleerai
Electrical air circuit breaker is a switching device which can be operated manually as well as automatically for controlling and protection of electrical power system respectively. Air circuit breaker, is the kind of circuit breaker which operates in air at atmospheric pressure.
CÔNG TY CỔ PHẦN THIẾT BỊ ĐIỆN HOÀNG PHƯƠNG
Địa chỉ: Số 10, ngõ 44, phố Võ Thị Sáu, P.Thanh Nhàn, Q.Hai Bà Trưng, TP. Hà Nội
MST: 0106798886
Điện thoại: 024.3215.1322
Website : Hoangphuongjsc.com
Phone/Zalo : 0944 240 317 / Kinhdoanh1.hpe@gmail.com
Phone/Zalo : 0975 123 698 / Kinhdoanh2.hpe@gmail.com
Phone/Zalo : 0961 008 858 / Kinhdoanh3.hpe@gmail.com
OM SWITCHGEAR AND ELECTRICALS is prominent manufacturer and trader of Electrical Control Panel, Electrical Switchgear, Pump, Motor, and Cables. Our products are well appreciated all over India for their quality. We are supported by a transport and packaging facility which helps us in keeping our electrical products safely while ensuring uninterrupted dispatch.
700 Series Interface E Elastimold Cable Connectors and Bushings connect and terminate HV cables to Interface E bushings on switchgear and transformers. Elastimold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F. Elastimold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables. 700 Series Interface E, Elastimold Bushings * Bushing Voltage Range 33kV-36kV * Bushing Current Rating 800Amps & 1250Amps * Bushing Type 5/8" Bolted Aluminium Insert Elastimold separable elbow connectors are high voltage cable terminations used to connect polymeric (XLPE or EPR insulated) power cables to HV equipment including transformers, switchgear, capacitors and motors. 700 Series Connectors - 750LR Tee Connectors & 775LR Tee Connectors 800-1250Amps 35-630sqmm Slip on cable connectors - quick to install to high voltage switchgear and transformers (oil, air and gas insulated) Touchproof cable terminations - made from conductive EPDM rubber, fully screened HV termination for safety One part cable termination - built-in stress relief, insulation and outer semi-conductive layers Maintenance friendly - readily disconnectable cable connector for high voltage maintenance work Compact cable connectors - space-saving HV cable terminations for SF6 gas insulated switchgear (GIS) EPDM rubber cable connectors - resistant to ozone, corona, chemicals, water and atmospheric pollutants Flexibility - Elastimold cable connectors are disconnectable and re-useable. Re-use of the Elastimold high voltage cable connector permits site re-location of HV electrical equipment without requiring cable re-termination. HV High Voltage Cable Connectors, Specification - Elastimold dead-break separable cable connectors suit all international high voltage bushing interfaces for the termination of HV cable into switchgear, transformers and motors. Elastimold cable connectors terminate high voltage power cables (typically 11kV, 15kV, 24kV, 33kV, 36kV up to 52kV) into SF6 GIS gas insulated switchgear including Schneider, ABB, Areva and Siemens. Elastimold cable connectors meet the requirements of ANSI/IEEE 386 & 404 and CENELEC EN50180 & EN50181 for high voltage "dead-break" cable connection, i..e connectors installed and terminated onto un-energised high voltage power cable. US specification "load-break" cable connectors for high voltage energised cable termination are available. High Voltage Cable Connectors - Elastimold cable connectors (elbow and straight types) are specified to terminate XLPE or EPR insulated high voltage power cables with copper tape or copper wire screens up to 52kV. Elastimold cable connectors are available to suit and terminate lead covered HV cables for hydro-carbon industries (oil, gas, petrochemicals) with ATEX certification for hazardous area Zones 1 and Zones 2.
600 Series Interface D Compact Elastimold Cable Connectors and Bushings connect and terminate HV cables to Interface D bushings on switchgear and transformers. Elastimold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F. Elastimold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
600 Series Interface D, Elastimold Bushings
* Bushing Voltage Range 12kV-24kV
* Bushing Current Rating 800Amps
* Bushing Type 5/8"
Bolted Aluminium Stud Elastimold separable elbow connectors are high voltage cable terminations used to connect polymeric (XLPE or EPR insulated) power cables to HV equipment including transformers, switchgear, capacitors and motors. 600 Series Connectors - 676LRA Tee Connectors, 12-24kV 1250Amps 35-630sqmm Slip on cable connectors - quick to install to high voltage switchgear and transformers (oil, air and gas insulated) Touchproof cable terminations - made from conductive EPDM rubber, fully screened HV termination for safety One part cable termination - built-in stress relief, insulation and outer semi-conductive layers Maintenance friendly - readily disconnectable cable connector for high voltage maintenance work Compact cable connectors - space-saving HV cable terminations for SF6 gas insulated switchgear (GIS) EPDM rubber cable connectors - resistant to ozone, corona, chemicals, water and atmospheric pollutants Flexibility - Elastimold cable connectors are disconnectable and re-useable. Re-use of the high voltage cable connector permits site re-location of HV electrical equipment without requiring cable re-termination.
Elastimold - HV High Voltage Joints, Terminations, Loadbreak & Deadbreak Connectors.
Load Break Elbows
A load break elbow when used with a hot stick can be connected or disconnected at high voltage under load, but can only be used with up to a 250kcmil cable. At 100% insulation level, a 250kcmil is good for 345A in underground duct, so you would be de-rating your system by using a 200A elbow with a 250kcmil cable, but they are still widely used due to the flexibility given to the high voltage distribution system at the equipment. Think about it…if you had a critical application where power disruptions were extremely costly and maintenance was required on up-stream equipment in, let’s say a non critical area, this product would be great. You could disconnect the load without disturbing the critical portions, perform the maintenance and then reconnect it. Just make sure to take safety precautions, making and breaking electrical connections under load is very dangerous. The load break elbow is typically not used in man-holes, because it does not allow expansion like the dead break elbow. The construction of the load break elbow does not allow it to be connected to other elbows, but the dead break does.
Dead Break Elbows
A dead break or “hammerhead” elbow can only be disconnected when not under load, this is because you need to actually unscrew a pin to detach it. It would be pretty tough to unscrew the pin with a hot stick and the arc from the disconnected load, if under load, would be pretty substantial. A dead break elbow allows an increased current rating (up to 600A) and can be used on basically all cable types. At 100% insulation level a 750kcmil cable is rated 610A in underground duct. When would you use a 750kcmil? In most non-utility cases you would design or install sets of 500kcmil or smaller if you needed more than one 500kcmil could handle. Even from a 1200A breaker, two sets of 500kcmil per phase would be sufficient for distribution (about 1000A), if the load was even that high. Most of the time you set the relays down to the actual load in order to limit the copper used. A dead break when used in man-holes for splicing cables allows the flexibility of connecting more than two cables together as well as future expansion if required. Say another building was added that needed power, you could just connect that building to the existing array of dead break elbows. This also works great when temporary power is needed for construction or even if the circus is in town and they need medium voltage (it happens!). They can pick up power from the man-hole with the dead break elbows or from a piece of equipment with dead break elbows. I’ve heard that ships are now starting to use medium voltage shore power, I wonder what kind of connections they use.
Nexans Euromold Separable Elbow Connectors 158LR are designed to terminate and connect high voltage polymeric cables to electrical equipment including motors, switchgear and transformers with Type A 250Amp interface as described by CENELEC EN50180 and 50181.
Nexans Euromold Elbow Connectors type 158LR meet the requirements of CENELEC HD 629.1.
Nexans Euromold separable elbow connectors are designed to terminate high voltage polymeric (XLPE EPR) screened (copper wire or copper tape) cables to CENELEC Interface Type A (250amp) bushings with 7.9mm plug-in pins, 11kV-24kV.
Nexans Euromold 158LR/G and Nexans Euromold 158LR seperable connectors are approved for terminating 11kV/12kV polymeric (XLPE EPR) cables into gas insulated (SF6) switchgear, including ABB Safe Ring Ring Main Units (RMU's) and ABB Safe Plus Switchgear. Euromold 158LR/G connectors include earthing leads.
Catalog: Inverter Option-Mitsubishi Electric
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Una serie de preguntas que todo emprendedor debería hacerse para saber si debe iniciar un nuevo proyecto en la industria de las Redes de Mercadeo.
Más información
Visita: http://www.victoreloir.com
700 Series Interface E Elastimold Cable Connectors and Bushings connect and terminate HV cables to Interface E bushings on switchgear and transformers. Elastimold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F. Elastimold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables. 700 Series Interface E, Elastimold Bushings * Bushing Voltage Range 33kV-36kV * Bushing Current Rating 800Amps & 1250Amps * Bushing Type 5/8" Bolted Aluminium Insert Elastimold separable elbow connectors are high voltage cable terminations used to connect polymeric (XLPE or EPR insulated) power cables to HV equipment including transformers, switchgear, capacitors and motors. 700 Series Connectors - 750LR Tee Connectors & 775LR Tee Connectors 800-1250Amps 35-630sqmm Slip on cable connectors - quick to install to high voltage switchgear and transformers (oil, air and gas insulated) Touchproof cable terminations - made from conductive EPDM rubber, fully screened HV termination for safety One part cable termination - built-in stress relief, insulation and outer semi-conductive layers Maintenance friendly - readily disconnectable cable connector for high voltage maintenance work Compact cable connectors - space-saving HV cable terminations for SF6 gas insulated switchgear (GIS) EPDM rubber cable connectors - resistant to ozone, corona, chemicals, water and atmospheric pollutants Flexibility - Elastimold cable connectors are disconnectable and re-useable. Re-use of the Elastimold high voltage cable connector permits site re-location of HV electrical equipment without requiring cable re-termination. HV High Voltage Cable Connectors, Specification - Elastimold dead-break separable cable connectors suit all international high voltage bushing interfaces for the termination of HV cable into switchgear, transformers and motors. Elastimold cable connectors terminate high voltage power cables (typically 11kV, 15kV, 24kV, 33kV, 36kV up to 52kV) into SF6 GIS gas insulated switchgear including Schneider, ABB, Areva and Siemens. Elastimold cable connectors meet the requirements of ANSI/IEEE 386 & 404 and CENELEC EN50180 & EN50181 for high voltage "dead-break" cable connection, i..e connectors installed and terminated onto un-energised high voltage power cable. US specification "load-break" cable connectors for high voltage energised cable termination are available. High Voltage Cable Connectors - Elastimold cable connectors (elbow and straight types) are specified to terminate XLPE or EPR insulated high voltage power cables with copper tape or copper wire screens up to 52kV. Elastimold cable connectors are available to suit and terminate lead covered HV cables for hydro-carbon industries (oil, gas, petrochemicals) with ATEX certification for hazardous area Zones 1 and Zones 2.
600 Series Interface D Compact Elastimold Cable Connectors and Bushings connect and terminate HV cables to Interface D bushings on switchgear and transformers. Elastimold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F. Elastimold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
600 Series Interface D, Elastimold Bushings
* Bushing Voltage Range 12kV-24kV
* Bushing Current Rating 800Amps
* Bushing Type 5/8"
Bolted Aluminium Stud Elastimold separable elbow connectors are high voltage cable terminations used to connect polymeric (XLPE or EPR insulated) power cables to HV equipment including transformers, switchgear, capacitors and motors. 600 Series Connectors - 676LRA Tee Connectors, 12-24kV 1250Amps 35-630sqmm Slip on cable connectors - quick to install to high voltage switchgear and transformers (oil, air and gas insulated) Touchproof cable terminations - made from conductive EPDM rubber, fully screened HV termination for safety One part cable termination - built-in stress relief, insulation and outer semi-conductive layers Maintenance friendly - readily disconnectable cable connector for high voltage maintenance work Compact cable connectors - space-saving HV cable terminations for SF6 gas insulated switchgear (GIS) EPDM rubber cable connectors - resistant to ozone, corona, chemicals, water and atmospheric pollutants Flexibility - Elastimold cable connectors are disconnectable and re-useable. Re-use of the high voltage cable connector permits site re-location of HV electrical equipment without requiring cable re-termination.
Elastimold - HV High Voltage Joints, Terminations, Loadbreak & Deadbreak Connectors.
Load Break Elbows
A load break elbow when used with a hot stick can be connected or disconnected at high voltage under load, but can only be used with up to a 250kcmil cable. At 100% insulation level, a 250kcmil is good for 345A in underground duct, so you would be de-rating your system by using a 200A elbow with a 250kcmil cable, but they are still widely used due to the flexibility given to the high voltage distribution system at the equipment. Think about it…if you had a critical application where power disruptions were extremely costly and maintenance was required on up-stream equipment in, let’s say a non critical area, this product would be great. You could disconnect the load without disturbing the critical portions, perform the maintenance and then reconnect it. Just make sure to take safety precautions, making and breaking electrical connections under load is very dangerous. The load break elbow is typically not used in man-holes, because it does not allow expansion like the dead break elbow. The construction of the load break elbow does not allow it to be connected to other elbows, but the dead break does.
Dead Break Elbows
A dead break or “hammerhead” elbow can only be disconnected when not under load, this is because you need to actually unscrew a pin to detach it. It would be pretty tough to unscrew the pin with a hot stick and the arc from the disconnected load, if under load, would be pretty substantial. A dead break elbow allows an increased current rating (up to 600A) and can be used on basically all cable types. At 100% insulation level a 750kcmil cable is rated 610A in underground duct. When would you use a 750kcmil? In most non-utility cases you would design or install sets of 500kcmil or smaller if you needed more than one 500kcmil could handle. Even from a 1200A breaker, two sets of 500kcmil per phase would be sufficient for distribution (about 1000A), if the load was even that high. Most of the time you set the relays down to the actual load in order to limit the copper used. A dead break when used in man-holes for splicing cables allows the flexibility of connecting more than two cables together as well as future expansion if required. Say another building was added that needed power, you could just connect that building to the existing array of dead break elbows. This also works great when temporary power is needed for construction or even if the circus is in town and they need medium voltage (it happens!). They can pick up power from the man-hole with the dead break elbows or from a piece of equipment with dead break elbows. I’ve heard that ships are now starting to use medium voltage shore power, I wonder what kind of connections they use.
Nexans Euromold Separable Elbow Connectors 158LR are designed to terminate and connect high voltage polymeric cables to electrical equipment including motors, switchgear and transformers with Type A 250Amp interface as described by CENELEC EN50180 and 50181.
Nexans Euromold Elbow Connectors type 158LR meet the requirements of CENELEC HD 629.1.
Nexans Euromold separable elbow connectors are designed to terminate high voltage polymeric (XLPE EPR) screened (copper wire or copper tape) cables to CENELEC Interface Type A (250amp) bushings with 7.9mm plug-in pins, 11kV-24kV.
Nexans Euromold 158LR/G and Nexans Euromold 158LR seperable connectors are approved for terminating 11kV/12kV polymeric (XLPE EPR) cables into gas insulated (SF6) switchgear, including ABB Safe Ring Ring Main Units (RMU's) and ABB Safe Plus Switchgear. Euromold 158LR/G connectors include earthing leads.
Catalog: Inverter Option-Mitsubishi Electric
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Una serie de preguntas que todo emprendedor debería hacerse para saber si debe iniciar un nuevo proyecto en la industria de las Redes de Mercadeo.
Más información
Visita: http://www.victoreloir.com
Catalog inverter family Mitsubishi Electric-Beeteco.comBeeteco
Catalog: Inverter Family, Inverter Mitsubishi
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
Generating a custom Ruby SDK for your web service or Rails API using Smithy
Advanced motion controls srst80
1. SHUNT REGULATORS
Shunt Regulators
The SRST Series shunt regulator assemblies are designed
to work with ADVANCED Motion Controls’ four quadrant
regenerative servo drives. During braking most of the
stored mechanical energy is fed back into the power supply,
which charges the output capacitor to a higher voltage. If
the charge reaches the drive’s over-voltage shutdown
point, motor control and braking will cease. To ensure
smooth braking of large inertial loads the use of a shunt-regulator
is recommended. Verify the need for a shunt
regulator by operating the drive under the worst case
braking condition. If the drive shuts off due to over-voltage
(blinking red LED) a shunt regulator is necessary (typically
during downward move or deceleration).
Model Number Rated Dissipation
Capability
Clamping
Voltage
SRST50 95 W 50 VDC
SRST70 95 W 70 VDC
SRST80 95 W 80 VDC
SRST90 95 W 90 VDC
SRST175 95 W 175 VDC
SRST185 95 W 185 VDC
SRST380 190 W 380 VDC
SRST400 190 W 400 VDC
SRST50, 70, 80, 90, 175, 185 SRST380, 400
Operation Features
When the DC Bus reaches the shunt voltage of the shunt
regulator assembly, the voltage comparator unit turns on
the electronic switch, which connects the R1 power resistor
across the DC Bus. This power resistor dissipates the
energy from the DC Bus. After the bus voltage is reduced to
less than the shunt voltage setting the resistor is
disconnected from the bus. A small hysterisis loop allows
time between switching. The SRST assemblies are available
with standard shunt voltages of 50, 70, 80, 90, 175, 185,
380, and 400 volts.
Models SRST50, 70, 80, 90, 175, 185 are designed for
use with servo drives up to 200 volts. These models have a
200 VDC, 1200 μF filter capacitor in them.
Models SRST380 and SRST400 are designed for use with
servo drives up to 400 volts. These models have a 450
VDC, 330 μF filter capacitor in them.
Contact factory for custom trip voltages.
Dissipates Excess Kinetic or Potential Energy to
Prevent Drive Over-Voltage Shut Down
Small Size, Low Cost, Ease of Use
Agency Approvals
US and Canadian safety compliance with
UL 508c, the industrial standard for power
conversion electronics. UL registered under
file number E140173. Note that machine
components compliant with UL are
considered UL registered as opposed to UL
listed, as would be the case for commercial
products.
Compliant with European CE for both the
Class A EMC Directive 2004/108/EC on
Electromagnetic Compatibility (specifically
EN 61000-6-4:2007 and EN 61000-6-
2:2005) and LVD requirements of directive
2006/95/EC (specifically EN 60204-1:2006),
a low voltage directive to protect users from
electrical shock.
RoHS (Reduction of Hazardous
Substances) is intended to prevent
hazardous substances such as lead from
being manufactured in electrical and
electronic equipment.
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
2. SHUNT REGULATORS
SPECIFICATIONS
Power Specifications
Description Units For Shunt Voltages Under 200 V For Shunt Voltages Over 200 V
Fuse - 3 A Motor Delay rated @ 250 VAC
Filter Capacitance (C1) 1 μF 1200 330
Dissipation Capabilities W 95 190
Resistance (R1) Ω 5 20
Mechanical Specifications
Description Units For Shunt Voltages Under 200 V For Shunt Voltages Over 200 V
Size (H x W x D)2 mm (in) 203.2 x 108.0 x 66.70 (8.00 x 4.25 x 2.63) 203.2 x 108.0 x 54.0 (8.00 x 4.25 x 2.13)
Weight kg (lbs) 0.14 (0.32) 0.21 (0.46)
Notes
1. Filter capacitance will add to existing DC Bus capacitance. Increased inrush current may occur as a result.
2. Worst-case depth dimension. See mounting dimensions for additional details.
BLOCK DIAGRAM
SHUNT REGULATOR
Voltage
Comparator
+ RED WIRE
TO SERVO DRIVE
DC BUS
GND, BLACK WIRE
**Resistor Value Depends on Model
C1
R1**
SWITCH
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
3. SHUNT REGULATORS
MOUNTING DIMENSIONS
AIDA 01/06/92
(0.13 [3.18])
MOUNTING DIMENSIONS
SHUNT REGULATOR
MDSHREG
E
NTS 1
4.25 [107.95]
3. HIGHEST POINT IN REFERENCE FROM
BASE PLATE SURFACE.
2. HIGHEST POINT IS 2.30 [58.47]
FOR UNITS UNDER A 200V TRIP VOLTAGE, AND
1.90 [48.31] FOR UNITS OVER A 200V TRIP VOLTAGE
NOTES
C UPDATE DWG. FORMAT 02/25/97 RB
8.00 [203.20]
SRST SERIES
1. DIMENSIONS IN [ ] ARE IN MM.
D CHG. ADDRESS ON TITLE BLOCK 02/19/02 RB
2X 0.22 [5.54]
SYM
7.50 [190.50]
2X FULL R.
0.17 [4.37]
7.66 [194.46]
0.25 [6.35]
0.81 [20.62]
0.17 [4.37]
2.13 [53.98]
2X
0.22 [5.54]
SYM
(0.81 [20.65])
SEE NOTE 2
(1.58 [40.01])
E UPDATED BASE PLATE TO CURRENT MOUNTING CONFIGURATION 04/27/05 RB
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
4. SHUNT REGULATORS
CUSTOMIZATION INFORMATION
ADVANCED Motion Controls’ products are available in many configurations. All models listed in the selection tables of the website
are readily available, standard product offerings.
ADVANCED Motion Controls also has the capability to promptly develop and deliver specified products for OEMs with volume
requests. Our Applications and Engineering Departments will work closely with your design team through all stages of
development in order to provide the best servo drive solution for your system. Equipped with on-site manufacturing for quick-turn
customs capabilities, ADVANCED Motion Controls utilizes our years of engineering and manufacturing expertise to decrease
your costs and time-to-market while increasing system quality and reliability. Feel free to contact Applications Engineering for
further information and details.
Examples of Customized Products
Optimized Footprint Tailored Project File
Private Label Software Silkscreen Branding
OEM Specified Connectors Optimized Base Plate
No Outer Case Increased Current Limits
Increased Current Resolution Increased Voltage Range
Increased Temperature Range Conformal Coating
Custom Control Interface Multi-Axis Configurations
Integrated System I/O Reduced Profile Size and Weight
Available Accessories
ADVANCED Motion Controls offers a variety of accessories designed to facilitate drive integration into a servo system.
Visit www.a-m-c.com to see which accessories will assist with your application design and implementation.
Power Supplies Shunt Regulators
Drive(s)
Filter Cards
To Motor
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
All specifications in this document are subject to change without written notice. Actual product may differ from pictures provided in this document.