This document discusses pressure-sensitive adhesives (PSAs) and adhesive products. It begins by introducing PSAs and their basic properties of being tacky and able to adhere to surfaces with light pressure. The document then discusses the composition of common PSAs, including natural rubber, synthetic rubbers, and acrylic polymers. It also describes different forms that PSAs can take, such as solutions, emulsions, and hot melts. The document focuses on important adhesive properties, including tack, peel adhesion, and shear resistance, explaining how each is measured and its significance. It provides schematics of common peel tests and shows how test results can depend on backing material.
Final results of the beams made of glued laminated timber (glulam) in the EU CELLUWOOD Project. These results were presented by AIDIMA at the CELLUWOOD Final Workshop on 4th September 2014.
During the workshop comprehensive outcomes of the CELLUWOOD project were presented and the future exploitation of the project results was discussed. The project outcomes were presented to the industry stakeholders and the research community. Some valuable feedback on project developed products and technology were obtained by the external workshop participants. The useful contacts were established with potential resin manufacture with an interest for further commercial exploitation of the CELLUWOOD technology, in particular lignin-based and nanocellulose-based gluing systems.
CELLUWOOD ( “Laminated Strong Eco-Material for Building Construction Made of Cellulose-Strengthened Wood - Final Outcomes”) was a four years EU project, funded under the Eco Innovation research initiative. The project aims to develop a new range of structural elements made of wood by introducing innovative production elements and includes the use of cellulose instead of petroleum-based glue in the lamination of the timber products. The main results will be the strong eco-beams and eco-columns and their most sustainable manufacturing technologies, in addition to significant environmental and cost benefits of the innovation. These are achieved by the introduction of the (new) technologies from other sectors (e.g. cellulose velvet, biocomposite reinforcement and bio-resin) for innovative uses in the defect removal and repairing, facilitating innovation in the use of nanocellulose and bio-resin technologies in timber reengineering, and the development, testing and demonstration of the new products.
The CELLUWOOD products include strong glulam Eco-beams and columns manufactured by using bio-based lignin resins and nanocellulose enhanced glue systems. Both innovative building products provide significant environmental benefits.
Coordinator and responsible of the project at AIDIMA: Miguel Ángel Abián
In the case of AIDIMA, this project is co-funded by IVACE (Instituto Valenciano de Competitividad Empresarial) and by the European Regional Development Fund (ERDF).
Final results of the beams made of glued laminated timber (glulam) in the EU CELLUWOOD Project. These results were presented by AIDIMA at the CELLUWOOD Final Workshop on 4th September 2014.
During the workshop comprehensive outcomes of the CELLUWOOD project were presented and the future exploitation of the project results was discussed. The project outcomes were presented to the industry stakeholders and the research community. Some valuable feedback on project developed products and technology were obtained by the external workshop participants. The useful contacts were established with potential resin manufacture with an interest for further commercial exploitation of the CELLUWOOD technology, in particular lignin-based and nanocellulose-based gluing systems.
CELLUWOOD ( “Laminated Strong Eco-Material for Building Construction Made of Cellulose-Strengthened Wood - Final Outcomes”) was a four years EU project, funded under the Eco Innovation research initiative. The project aims to develop a new range of structural elements made of wood by introducing innovative production elements and includes the use of cellulose instead of petroleum-based glue in the lamination of the timber products. The main results will be the strong eco-beams and eco-columns and their most sustainable manufacturing technologies, in addition to significant environmental and cost benefits of the innovation. These are achieved by the introduction of the (new) technologies from other sectors (e.g. cellulose velvet, biocomposite reinforcement and bio-resin) for innovative uses in the defect removal and repairing, facilitating innovation in the use of nanocellulose and bio-resin technologies in timber reengineering, and the development, testing and demonstration of the new products.
The CELLUWOOD products include strong glulam Eco-beams and columns manufactured by using bio-based lignin resins and nanocellulose enhanced glue systems. Both innovative building products provide significant environmental benefits.
Coordinator and responsible of the project at AIDIMA: Miguel Ángel Abián
In the case of AIDIMA, this project is co-funded by IVACE (Instituto Valenciano de Competitividad Empresarial) and by the European Regional Development Fund (ERDF).
(www.witcollubricants.com) Witmans Industries Pvt. Ltd. is an ISO 9001:2008 certified business entity engaged in manufacturing, supplying, trading and exporting a comprehensive assortment of Industrial Oil, Greases, Paints and Waxes. Our range is developed in strict accordance with the global quality standards by utilizing premium quality raw material, modern machinery & genuine techniques. Owing to the qualitative fabrications, our range is widely appreciated for high thermal stability, rust, corrosion, wear, foam & moisture resistance and durability.
“Selecting the proper equipment is essential, in order to achieve maximum efficiency and cost-effec- tiveness. Let Sturtevant help you choose the model that’s best for you
UV-curable polyurethane dispersions (UV-PUDs) have become a well established and commercially successful class of products because of their combination of low environmental impact, range of achievable properties and ease of use. This presentation provides an overview of Sartomer's UV-PUDs, including end applications, liquid properties, processing and curing conditions, performance rankings and other features. For more information, go to www.sartomer.com and follow Sartomer on Twitter @SartomerGlobal.
(www.witcollubricants.com) Witmans Industries Pvt. Ltd. is an ISO 9001:2008 certified business entity engaged in manufacturing, supplying, trading and exporting a comprehensive assortment of Industrial Oil, Greases, Paints and Waxes. Our range is developed in strict accordance with the global quality standards by utilizing premium quality raw material, modern machinery & genuine techniques. Owing to the qualitative fabrications, our range is widely appreciated for high thermal stability, rust, corrosion, wear, foam & moisture resistance and durability.
“Selecting the proper equipment is essential, in order to achieve maximum efficiency and cost-effec- tiveness. Let Sturtevant help you choose the model that’s best for you
UV-curable polyurethane dispersions (UV-PUDs) have become a well established and commercially successful class of products because of their combination of low environmental impact, range of achievable properties and ease of use. This presentation provides an overview of Sartomer's UV-PUDs, including end applications, liquid properties, processing and curing conditions, performance rankings and other features. For more information, go to www.sartomer.com and follow Sartomer on Twitter @SartomerGlobal.
Rotary and Shaft Seals are used in components with oscillating or rotating parts to keep lubrication fluids in while preventing ingress of mud and water. Trelleborg seals help improve components life and long term performance.
A release liner is a critical element in a pressure sensitive adhesive product - perhaps as important as the adhesive itself. Pressure sensitive tapes, labels, and transfer films must be protected from accidental contact with other surfaces. They must also be constructed to allow for winding into rolls for the
purpose of packaging and application. Without a release liner many PSA products could not be produced and the end user would be faced with an unworkable lump of sticky adhesive.
The book Adhesive Technology and Formulations Hand Book covers almost all the basic and advanced details to setup own Gums and Adhesive Unit. The new edition of the book is covering latest methods including Introduction, Historical Development of Adhesives and Adhesive Bonding, Types of Adhesives, Emulsion and Dispersion Adhesives, Testing of Adhesives,
Protein Adhesives for Wood, Hot Melt Adhesives, Animal Glues and Adhesives,
Polyvinyl Acetate/Alcohol Based Adhesives, Ethylene-Vinyl Acetate
Copolymers, Polyvinyl Acetal Adhesives, Silicone Adhesives, Epoxide
Adhesives, Polyester Adhesives, Furane Adhesives, Phenolic Resin Adhesives,
Cellulose Derivative Adhesives, Epoxy Polyurethane Adhesives,
Polyisocyanate/Polyurethane Adhesive, Amino (Urea & Melamine)
Formaldehyde Adhesives, Paper, Board & Packaging Adhesives, Remoistenable Adhesives, Gum Arabic etc. Adhesives, Footwear Applications
of Adhesives, High-Temperature Adhesives, Dispensing of Adhesives, Natural
Rubber–Based Adhesives, Polysulfied Sealants and Adhesives, Phenolic Resin
Adhesives, Urea–Formaldehyde Adhesives, Melamine–Formaldehyde Adhesives, Polyurethane Adhesives, Unsaturated Polyester Adhesives, Reactive Acrylic Adhesives, Technology of Cyanoacrylate Adhesives for
Industrial Assembly, Silicone Adhesives and Sealants, Epoxy Resin Adhesives,
Pressure-Sensitive Adhesives, Adhesives in the Automotive Industry, Adhesive
Based on Vinyl Acetate, Printing Gums (Guar Gum Based), Leather Based
Adhesive, Latex Rubber Based Adhesive, Office Paste, Starch and Dextrin
Based Adhesive, Adhesive for Corrugation Dry Powder and Paste, Adhesive
(Different Type), Adhesive Industries (Laminated, Fevicol, Sticker DDL and
Other Types of Adhesive), Rubber Adhesive, Adhesive (Polyvinyl Butyral
Based), Self Adhesive Labels, Ester Gums (Food Grade), Vulcanizing Rubber
Solution/Cement for Automobile Tyres, Industrial Adhesive Based on Starch
Gum, Dextrin Silicate, Suppliers of Plant & Machineries and Suppliers of Raw
Materials.
The book has been written for the benefit and to prove an asset and a
handy reference guide in the hands of new entrepreneurs and well established
industrialists.
Director
Treadwell is a leading FRP products manufacturer and supplier in Australasia. Their wide range of products includes FRP handrails, FRP grating, FRP ladders, access systems, instrumentation stands, support systems, rung covers, deck plating etc.
Seals are four lipped seals with a specially developed sealing profile. A wide range of elastomer materials for both standard and special applications allows practically all liquid and gaseous media to be sealed. Quad-Ring Seals are vulcanized as a continuous ring. They are characterized by their annular form with a four lipped profile.
Adhesives for • Design • Manufacturing • Assembly • Maintenence • Repair & Overhaul
Permabond’s history of developing and manufacturing engineering adhesives spans four decades and three continents.
Today, Permabond Engineering Adhesives Ltd (Europe & Asia) and Permabond LLC (Americas) provide technological solutionsto engineers all over the world, with officesand facilities in America, Asia and Europe, backed by a high-tech ISO 9001:2008 certified production plant in Europe.
This brochure contains information on our most popular products, if you don’t see exactly what you need, or
would like assistance in selecting the best product for your application, please contact us: