This document provides the technical specifications for the EL1001 Mach 3 control system. It includes information about the system model number, software version, base PCBA number, and PCB board number. The document also describes the basic system features, power requirements, outputs, and wiring configuration including DIP switch settings.
This document provides technical specifications for the EL1000 Mach 3 control system. It includes the model number, software version, base PCBA number, and HEX file. It also lists the base panels that can be used and provides a system revision history. The document describes basic system features, power requirements, system outputs, and persistent memory functions. It includes a wiring diagram, DIP switch settings, and definitions for switches, jumpers, and other components.
This document provides the technical specifications for the EL1000P2 Mach 3 control system. It includes information about the system model number, software version, base PCBA and PCB part numbers. The document also describes the basic system features, power requirements, outputs, and persistent memory functionality. Diagrams show the switchbank and jumper settings, and definitions are provided for the DIP switches and jumpers.
This document provides technical specifications for the EL1000 Mach 3 control system. It includes the model number, software version, base PCBA number, and PCB number. It also lists the base panels that can be used and provides a revision history, basic system features, wiring configuration details, DIP switch settings, and definitions for switches and jumpers.
This document provides the technical specifications for the EL1001 Mach 3 controller system. It includes the model number, software version, and component part numbers. The document also describes the basic system features, power requirements, outputs, and programming via DIP switches and jumpers. Configuration options and a wiring diagram are shown.
This document provides technical specifications and information for the Balboa Instruments VS510SZ pool and spa control system. It includes the model number, software version, and other identifying information. wiring diagrams and instructions are provided showing how to configure dip switches and connect components like pumps, lights, and an ozone generator. Instructions are also given on resetting persistent memory when changing dip switch settings.
This document provides a tech sheet for the Balboa Instruments VS511SZ system. It lists the system model number and software version, as well as part numbers for components like the base PCBA, panels, and heater. It also provides a revision history, lists basic system features and functions, and describes the power up display sequence and how to reset persistent memory.
This document provides technical specifications for the Balboa Instruments VS511SZ pool and spa control system. It includes the model number, software version, and other component details. Wiring diagrams and dip switch settings are shown to configure the system for different features and functions. Guidelines are provided for resetting persistent memory and setting the voltage output for ozone connections.
This document provides information about the VS500Z hot tub control system from Balboa Instruments. It lists the system model and software version, compatible base panels and optional equipment. It also includes a basic overview of system features, functions, and power requirements. The revision history shows software updates over time.
This document provides technical specifications for the EL1000 Mach 3 control system. It includes the model number, software version, base PCBA number, and HEX file. It also lists the base panels that can be used and provides a system revision history. The document describes basic system features, power requirements, system outputs, and persistent memory functions. It includes a wiring diagram, DIP switch settings, and definitions for switches, jumpers, and other components.
This document provides the technical specifications for the EL1000P2 Mach 3 control system. It includes information about the system model number, software version, base PCBA and PCB part numbers. The document also describes the basic system features, power requirements, outputs, and persistent memory functionality. Diagrams show the switchbank and jumper settings, and definitions are provided for the DIP switches and jumpers.
This document provides technical specifications for the EL1000 Mach 3 control system. It includes the model number, software version, base PCBA number, and PCB number. It also lists the base panels that can be used and provides a revision history, basic system features, wiring configuration details, DIP switch settings, and definitions for switches and jumpers.
This document provides the technical specifications for the EL1001 Mach 3 controller system. It includes the model number, software version, and component part numbers. The document also describes the basic system features, power requirements, outputs, and programming via DIP switches and jumpers. Configuration options and a wiring diagram are shown.
This document provides technical specifications and information for the Balboa Instruments VS510SZ pool and spa control system. It includes the model number, software version, and other identifying information. wiring diagrams and instructions are provided showing how to configure dip switches and connect components like pumps, lights, and an ozone generator. Instructions are also given on resetting persistent memory when changing dip switch settings.
This document provides a tech sheet for the Balboa Instruments VS511SZ system. It lists the system model number and software version, as well as part numbers for components like the base PCBA, panels, and heater. It also provides a revision history, lists basic system features and functions, and describes the power up display sequence and how to reset persistent memory.
This document provides technical specifications for the Balboa Instruments VS511SZ pool and spa control system. It includes the model number, software version, and other component details. Wiring diagrams and dip switch settings are shown to configure the system for different features and functions. Guidelines are provided for resetting persistent memory and setting the voltage output for ozone connections.
This document provides information about the VS500Z hot tub control system from Balboa Instruments. It lists the system model and software version, compatible base panels and optional equipment. It also includes a basic overview of system features, functions, and power requirements. The revision history shows software updates over time.
This document provides a tech sheet for the VS504SZ system with software version 43. It includes information about the system model, base PCBA, panels, and features. The document also provides wiring diagrams and explanations of DIP switch settings and jumper configurations for the system.
This document provides technical specifications for the Balboa Instruments VS520DZ pool and spa control system. It includes information on the system model number, software version, and electronic printed circuit board. It also provides details on system wiring configuration and dip switch settings, basic features and functions, and revision history.
This document provides technical specifications for the EL84P Mach 3 pool and spa control system. It includes the model and software version numbers, optional base and auxiliary panels that can be used, and a system revision history. Wiring diagrams and DIP switch settings are provided for the default system configuration.
This document provides a technical sheet for the Balboa Instruments GS520DZ system. It includes information on the system model and software version, as well as the base PCBA and PCB used. It also lists the basic system features and functions, wiring configuration and DIP switch settings for two setup options, and a revision history for the system software.
This document provides information about a VS514SZ hot tub system including:
- The system model number and software version
- A list of parts included in the system
- An overview of basic system features like power requirements, outputs, and optional devices
- Details on resetting persistent memory to update DIP switch settings
This document provides technical specifications and wiring information for the Balboa Instruments VS503SZ system. Key details include:
- The system model is a VSP-VS503SZ-DCAH with software version 43.
- It lists the main PCBA, PCB, and base panel part numbers.
- Wiring diagrams and descriptions are provided for the standard configuration including power requirements, outputs, optional devices, and dip switch settings.
- Instructions for resetting persistent memory and details on time of day retention are included.
- Guidelines are given for ozone connections and changing the voltage output.
This document provides technical specifications for the Balboa Instruments GS5-GS514SZ-RCA-3.0 pool/spa control system. It includes information on the system model number, software version, and electrical components. The document also details the system's basic features and functions, wiring configuration, dip switch settings, and electrical service options.
This document provides information on the GS504SZ control system, including:
- The system model number and software version
- A list of included components and their part numbers
- A history of software updates to the system
- Descriptions of basic system features and functions
- Wiring configuration and DIP switch settings for setup
- Electrical service configuration options
This document provides technical specifications for the VS504SZ pool and spa control system. It includes information about the system model number, software version, and electrical pinouts. The document also details wiring configurations, dip switch settings, and connections for optional devices like ozone generators.
This document provides specifications and configuration details for the Balboa Instruments GS501Z pool and spa control system. Key components include the GS500Z main printed circuit board and optional display panels. The system supports various heater sizes and voltages, and can be configured for different pump, circulation, and electrical wiring setups using dip switches and jumpers. Revisions to the main circuit board and a history of software updates are also documented.
This document provides information on the GS514SZ spa control system, including:
- The model and software version numbers
- Details on the base PCBA, PCB, and panels used
- A history of software updates to the system
- An overview of the basic system features, functions, and optional devices
- Instructions for resetting persistent memory after changing DIP switch settings
- Notes on power requirements and system outputs
This document provides technical specifications for the Balboa Instruments GS510DZ spa control system. It lists the model number, software version, and component part numbers. The system requires a PCB revision B and has outputs that can control pumps, lights, auxiliaries, and optional devices. It also describes basic features like power requirements and the power up display sequence.
The document provides technical specifications for the Balboa VS525Z system. Key details include:
- Model number VSP-VS525-BCAH and software version 43
- Compatible base panels and required auxiliary panel
- Wiring diagrams and DIP switch settings for two setup configurations
- Features like persistent memory reset process and power up display sequence
This document provides technical specifications and configuration details for the Balboa Instruments GS501SZ pool and spa control system. It lists the system model number, software version, and electrical component part numbers. Wiring diagrams and DIP switch settings are provided for the standard configuration with options for alternative setups. Troubleshooting tips and specifications for optional equipment are also included.
This document provides specifications for the Balboa GS525Z spa control system. Key details include:
- The system model is a GS5-GS525Z-RCA-3.0K with software version 43.
- It requires a base PCBA and PCB as well as panels for different spa models.
- The basic system features include power requirements, outputs, and additional optional devices.
- Wiring configurations and DIP switch settings are outlined for setups 1 and 2, showing connections for heaters, pumps, blowers, and other devices.
This document provides technical specifications for the Balboa Instruments EL2001 Mach 3 pool and spa control system. It includes information about software versions, compatible base panels and accessories. The document also describes features of the system like power requirements, outputs, and optional devices. It provides details on persistent memory functionality for retaining settings and the normal power up display sequence.
This document provides technical specifications for the EL2001 Mach 3 controller system, including:
- Model and software version numbers
- Supported base panels and components
- A revision history showing software updates
- Descriptions of basic system features, outputs, and optional devices
- Diagrams of wiring configuration and DIP switch settings
- Definitions of DIP switches and jumpers
This document provides technical specifications and configuration information for the Balboa Instruments EL2001 Mach 3 controller. Key details include:
- The system model and software version numbers
- Supported base panels and components
- A revision history showing past software updates
- Descriptions of basic system features, outputs, and optional devices
- Information on persistent memory and the power-up display sequence
- Wiring diagrams and definitions of the DIP switch and jumper settings
This document provides technical specifications for the EL2001 Mach 3 controller, including:
- The model, software version, and part numbers for the system and its components.
- Information on compatible base panels and a system revision history.
- Overviews of the system's features, power requirements, outputs, and optional devices.
- Details on persistent memory, the power-up display sequence, wiring configuration and DIP switch settings.
- Definitions of the DIP switches and jumpers used to configure the system.
Here are the key points about the Visual Diagnostic System (VDS):
- The VDS uses control-mounted indicators and lighted component cords to troubleshoot issues at a glance.
- It allows you to see if a component is receiving the proper voltage.
- You can check if a fuse has blown.
- By pressing a switch, you can verify the system is receiving voltage from the breaker panel.
- If a VDS light is illuminated, refer to the owner's manual for troubleshooting details.
- The VDS makes troubleshooting simple by doing it for you and clearly indicating the source of any issues.
So in summary, the VDS is a diagnostic tool that
This document provides technical specifications for the Balboa Instruments GS520SZ pool and spa control system. It lists the system model number and software version, along with part numbers for components. System features include outputs for pumps, blowers, lights, and other devices. The document also describes power requirements and the startup display sequence when power is applied.
The document provides technical specifications for the Balboa Instruments GS500Z pool and spa control system. It includes the system model number, software version, and other component part numbers. The document also provides information on installation and configuration including wiring diagrams, dip switch settings, jumper settings and descriptions of basic system features and functions.
This document provides a tech sheet for the VS504SZ system with software version 43. It includes information about the system model, base PCBA, panels, and features. The document also provides wiring diagrams and explanations of DIP switch settings and jumper configurations for the system.
This document provides technical specifications for the Balboa Instruments VS520DZ pool and spa control system. It includes information on the system model number, software version, and electronic printed circuit board. It also provides details on system wiring configuration and dip switch settings, basic features and functions, and revision history.
This document provides technical specifications for the EL84P Mach 3 pool and spa control system. It includes the model and software version numbers, optional base and auxiliary panels that can be used, and a system revision history. Wiring diagrams and DIP switch settings are provided for the default system configuration.
This document provides a technical sheet for the Balboa Instruments GS520DZ system. It includes information on the system model and software version, as well as the base PCBA and PCB used. It also lists the basic system features and functions, wiring configuration and DIP switch settings for two setup options, and a revision history for the system software.
This document provides information about a VS514SZ hot tub system including:
- The system model number and software version
- A list of parts included in the system
- An overview of basic system features like power requirements, outputs, and optional devices
- Details on resetting persistent memory to update DIP switch settings
This document provides technical specifications and wiring information for the Balboa Instruments VS503SZ system. Key details include:
- The system model is a VSP-VS503SZ-DCAH with software version 43.
- It lists the main PCBA, PCB, and base panel part numbers.
- Wiring diagrams and descriptions are provided for the standard configuration including power requirements, outputs, optional devices, and dip switch settings.
- Instructions for resetting persistent memory and details on time of day retention are included.
- Guidelines are given for ozone connections and changing the voltage output.
This document provides technical specifications for the Balboa Instruments GS5-GS514SZ-RCA-3.0 pool/spa control system. It includes information on the system model number, software version, and electrical components. The document also details the system's basic features and functions, wiring configuration, dip switch settings, and electrical service options.
This document provides information on the GS504SZ control system, including:
- The system model number and software version
- A list of included components and their part numbers
- A history of software updates to the system
- Descriptions of basic system features and functions
- Wiring configuration and DIP switch settings for setup
- Electrical service configuration options
This document provides technical specifications for the VS504SZ pool and spa control system. It includes information about the system model number, software version, and electrical pinouts. The document also details wiring configurations, dip switch settings, and connections for optional devices like ozone generators.
This document provides specifications and configuration details for the Balboa Instruments GS501Z pool and spa control system. Key components include the GS500Z main printed circuit board and optional display panels. The system supports various heater sizes and voltages, and can be configured for different pump, circulation, and electrical wiring setups using dip switches and jumpers. Revisions to the main circuit board and a history of software updates are also documented.
This document provides information on the GS514SZ spa control system, including:
- The model and software version numbers
- Details on the base PCBA, PCB, and panels used
- A history of software updates to the system
- An overview of the basic system features, functions, and optional devices
- Instructions for resetting persistent memory after changing DIP switch settings
- Notes on power requirements and system outputs
This document provides technical specifications for the Balboa Instruments GS510DZ spa control system. It lists the model number, software version, and component part numbers. The system requires a PCB revision B and has outputs that can control pumps, lights, auxiliaries, and optional devices. It also describes basic features like power requirements and the power up display sequence.
The document provides technical specifications for the Balboa VS525Z system. Key details include:
- Model number VSP-VS525-BCAH and software version 43
- Compatible base panels and required auxiliary panel
- Wiring diagrams and DIP switch settings for two setup configurations
- Features like persistent memory reset process and power up display sequence
This document provides technical specifications and configuration details for the Balboa Instruments GS501SZ pool and spa control system. It lists the system model number, software version, and electrical component part numbers. Wiring diagrams and DIP switch settings are provided for the standard configuration with options for alternative setups. Troubleshooting tips and specifications for optional equipment are also included.
This document provides specifications for the Balboa GS525Z spa control system. Key details include:
- The system model is a GS5-GS525Z-RCA-3.0K with software version 43.
- It requires a base PCBA and PCB as well as panels for different spa models.
- The basic system features include power requirements, outputs, and additional optional devices.
- Wiring configurations and DIP switch settings are outlined for setups 1 and 2, showing connections for heaters, pumps, blowers, and other devices.
This document provides technical specifications for the Balboa Instruments EL2001 Mach 3 pool and spa control system. It includes information about software versions, compatible base panels and accessories. The document also describes features of the system like power requirements, outputs, and optional devices. It provides details on persistent memory functionality for retaining settings and the normal power up display sequence.
This document provides technical specifications for the EL2001 Mach 3 controller system, including:
- Model and software version numbers
- Supported base panels and components
- A revision history showing software updates
- Descriptions of basic system features, outputs, and optional devices
- Diagrams of wiring configuration and DIP switch settings
- Definitions of DIP switches and jumpers
This document provides technical specifications and configuration information for the Balboa Instruments EL2001 Mach 3 controller. Key details include:
- The system model and software version numbers
- Supported base panels and components
- A revision history showing past software updates
- Descriptions of basic system features, outputs, and optional devices
- Information on persistent memory and the power-up display sequence
- Wiring diagrams and definitions of the DIP switch and jumper settings
This document provides technical specifications for the EL2001 Mach 3 controller, including:
- The model, software version, and part numbers for the system and its components.
- Information on compatible base panels and a system revision history.
- Overviews of the system's features, power requirements, outputs, and optional devices.
- Details on persistent memory, the power-up display sequence, wiring configuration and DIP switch settings.
- Definitions of the DIP switches and jumpers used to configure the system.
Here are the key points about the Visual Diagnostic System (VDS):
- The VDS uses control-mounted indicators and lighted component cords to troubleshoot issues at a glance.
- It allows you to see if a component is receiving the proper voltage.
- You can check if a fuse has blown.
- By pressing a switch, you can verify the system is receiving voltage from the breaker panel.
- If a VDS light is illuminated, refer to the owner's manual for troubleshooting details.
- The VDS makes troubleshooting simple by doing it for you and clearly indicating the source of any issues.
So in summary, the VDS is a diagnostic tool that
This document provides technical specifications for the Balboa Instruments GS520SZ pool and spa control system. It lists the system model number and software version, along with part numbers for components. System features include outputs for pumps, blowers, lights, and other devices. The document also describes power requirements and the startup display sequence when power is applied.
The document provides technical specifications for the Balboa Instruments GS500Z pool and spa control system. It includes the system model number, software version, and other component part numbers. The document also provides information on installation and configuration including wiring diagrams, dip switch settings, jumper settings and descriptions of basic system features and functions.
This document provides safety instructions and operational information for an eco-2 plus solid-state pool/spa system. It outlines component identification, operating instructions for the power switch, heater indicator, and other optional features. Troubleshooting tips and maintenance considerations are also included to safely and properly operate the pool/spa system.
This document is a tech sheet for the Balboa Instruments system model GS5-GS511SZ-RCA-3.0. It provides information about the system components, software version, optional devices, basic features and functions, and a system revision history. The document also describes the power up display sequence and explains how persistent memory is used to store settings.
The document contains contact information for a company called MyPoolSpas.com that sells wholesale pool and spa parts, including their website address http://www.MyPoolSpas.com and phone number 920-925-3094. This information is repeated multiple times.
This document provides instructions for programming and operating the Hayward 2100 series pool and spa control system. It describes:
- The functions of the buttons on the master control panel and wireless remote, including controlling pool features, temperature, lighting, etc.
- How to program the filter pump schedule, including setting run time, start time, and number of daily cycles
- Safety instructions and guidelines for using the spa/pool system
This document is a technical sheet for the VS500Z 120V GFCI spa system. It provides details on the system model number, software version, and component part numbers. It also lists the basic features and functions of the system, including power requirements, outputs, optional devices, and a diagram of the circuit board labels. The system revision history is given, showing changes made with different software updates.
This document provides information about the VS501Z hot tub system. It lists the system model number and software version, as well as compatible base panels and optional devices. It also includes a system revision history, descriptions of basic features and functions, and diagrams of system components. Safety instructions and troubleshooting tips are provided.
The document provides specifications for the Balboa Instruments VS500Z hot tub control system. Key details include the system model number, software version, and optional panels. Wiring diagrams and DIP switch settings are shown for two possible configurations (setups 1 and 2) of the control system. Troubleshooting tips are provided, such as how to reset persistent memory by jumping J43 when changing DIP switch settings.
This document provides specifications and configuration information for the VS300FL5 hot tub system. It includes:
- The model number, software version, and other identifying information for the base PCBA and panels
- Wiring diagrams and descriptions of the DIP switch settings and jumper locations for configuring the system
- Details on optional panels, heaters, and other components that can be used with the base system
- Guidelines for setting up the ozone generator connection and selecting the appropriate voltage
1. The document provides information on configuring a VS511S hot tub control system, including the circuit board layout, wiring diagrams, and dip switch and jumper settings.
2. The system can be set up for different pumps, blowers, lighting, and other components depending on the dip switch and jumper configurations.
3. Instructions are provided for connecting an ozone generator based on whether it requires 120V or 240V configuration.
The document provides specifications and configuration details for the Balboa Instruments VS501Z hot tub control system. It lists the system model and software version, compatible components, wiring diagrams and DIP switch settings for two example configurations. Basic features and functions of the control system are also outlined, including power requirements, system outputs, and optional devices.
This document provides technical specifications for the Balboa Instruments VS510SZ pool and spa control system. It includes information about the system model and software version, compatible base panels and boards, a system revision history, basic features and functions, wiring configuration and DIP switch settings, and descriptions of auxiliary panel connections and ozone connections. The high-level purpose is to provide details needed for installation and operation of the VS510SZ pool and spa control system.
This document provides technical specifications and wiring information for the VS500Z 120V GFCI spa control system from Balboa Instruments. Key details include:
- The system model number is VSP-VS500Z-FCAH and the software version is 43.
- It provides wiring diagrams and definitions for the DIP switches and jumpers that configure the system operation and components.
- Instructions are included for resetting persistent memory to allow new DIP switch settings to take effect and troubleshooting power up sequences.
This document provides details on the VS501Z hot tub control system from Balboa Instruments, including:
- The system model number, software version, and EPN number
- Details on the base PCBA and panels that can be used
- A diagram of the basic system features and connections
- Instructions for resetting persistent memory after changing DIP switch settings
This document provides technical specifications for the Balboa Instruments VS520SZ pool and spa control system. It includes the model number, software version, and component part numbers. The basic system features include power requirements, outputs, and optional devices. The document also provides an overview of the power up display sequence and resetting persistent memory.
This document provides technical specifications for the Balboa Instruments VS520SZ pool and spa control system. It includes information about the system model number, software version, and electrical panel number. The document also provides details about system features, wiring configuration, dip switch settings, and ozone connections.
This document provides technical specifications for the Balboa Instruments VS510SZ spa control system. It includes the model number, software version, and other component details. Wiring diagrams and dip switch settings are shown to configure pumps, heating, and other functions. Guidelines are provided for resetting persistent memory and basic system operation.
This document is a tech sheet for the Balboa Instruments GS501Z system. It provides information on the system model, software version, and electrical panel options. The sheet also details the basic system features, wiring configuration, dip switch settings, and electrical service configuration options.
This document provides information on the GS501Z hot tub control system, including:
- The system model number and software version
- A list of included and optional control panels and components
- Wiring diagrams and explanations of dip switch settings
- Descriptions of features like heater wattage and temperature display options
- A revision history and basic troubleshooting tips
This document provides information about the VS513Z hot tub system from Balboa Instruments including:
- The system model number, software version, and other identifying information.
- A list of components included in the system.
- Instructions for resetting persistent memory and an explanation of time retention.
- Wiring diagrams and explanations of dip switch and jumper settings.
- Information on optional devices and connections like the ozone generator.
This document provides specifications and configuration details for the Balboa Instruments VS501Z3K hot tub control system. It lists the system model and software version, compatible base panels and optional equipment. The second page describes the system's basic features and functions. Subsequent pages detail the wiring configuration and DIP switch settings for two setup examples.
This document provides information about a VS511Z hot tub system from Balboa Instruments, including:
- The system model number, software version, and other identifying information.
- A list of compatible base and display panel parts.
- A revision history showing past software updates.
- An overview of basic system features like power requirements and outputs.
- A diagram labeling system components.
This document provides technical specifications for the Balboa Instruments GS500Z control system. It includes the system model number, software version, and optional equipment. The document also describes the system's basic features, functions, power requirements, outputs, and optional devices. It provides a diagram of the control system layout and connections.
This document provides technical specifications and information for the Balboa Instruments VS515Z spa control system. It includes details on the system model number, software version, base PCBA and panels used. Wiring diagrams and descriptions of features such as power requirements, outputs, and dip switch settings are also provided. Instructions for resetting persistent memory and guidelines for safe ozone generator connections are outlined.
The document provides specifications for the Balboa Instruments VS500Z hot tub control system. Key details include:
- Model and software version numbers
- Compatible components like the main circuit board, display panels, and heater
- Wiring diagrams and DIP switch settings for two equipment configurations
- An overview of features and basic operation
This document provides specifications for the Balboa VS523DZ spa system. It includes the model number, software version, and component part numbers. The document also lists the basic system features, including power requirements, output devices, and optional equipment. Wiring diagrams and DIP switch settings are provided for two different output device configurations.
This document provides technical specifications for the Balboa Instruments GS520SZ spa control system. It includes the system model number, software version, and component part numbers. Wiring diagrams and DIP switch settings are provided for two different spa equipment setup configurations.
This document summarizes the technical specifications of the GS501Z control system from Balboa Instruments, including:
- The model number, software version, and other identifying information.
- The included base panels and optional panels that can be used.
- A system revision history and template used.
- Basic system features such as power requirements, outputs, and optional devices.
- Wiring configuration details including DIP switch settings.
- Electrical service configuration options.
This document provides instructions for adjusting various settings on a spa control panel, including temperature unit (F or C), time of day, economy mode start time and duration, panel lock, and descriptions of default settings and modes like economy mode and freeze protection. Settings are adjusted using the program, list, enter and up/down arrow keys, and confirmed with enter. Error codes are displayed as flashing dots and require servicing.
The document provides instructions for operating various functions of a spa or hot tub. It describes the economy mode which maintains water temperature 20°F below the set point. It also describes the freeze protection mode which activates the pump and heater if water drops below certain temperatures. Default settings are described such as filtration cycles running for 1 hour every 24 hours with water at 95°F. Instructions are provided for operating pumps, blowers, lights and setting the temperature. Error codes and troubleshooting tips are also summarized.
This document provides installation and operation instructions for a PS-9704 series pool/spa control system. It includes guidelines for installing remote heaters, making electrical and wet connections, programming filtration settings, and troubleshooting. Safety precautions are outlined, and a wiring diagram and parts list are provided.
The document provides installation and operation instructions for a Platinum Series pool and spa control system. It includes details on installing remote heaters, electrical connections, temperature sensors, equipment connections, and programming filtration settings. Safety instructions are provided at the beginning regarding proper installation and use of the system.
The document provides installation instructions for PS-6502 & PS-6503 Platinum Series pool and spa control systems. It describes how to install the heater in different locations including on the bottom, back, or top of the control box using adjustable clamps or slide brackets. The instructions also cover electrical installation, temperature sensor placement, equipment connections, and programming filtration settings. Additional sections provide details on optional equipment, operational considerations, troubleshooting, and warranty information.
The document provides information on the default system operation, freeze protection modes, high temperature error handling, filtration cycles, pump and blower controls, light controls, temperature setting, and error identification for a spa or pool system. When power is applied, the system will initiate a default 24-hour filtration cycle at 95°F. It describes two modes of freeze protection below 59°F and 49°F and will suspend filtration if temperatures exceed 115°F or reach errors.
The document provides instructions for operating and programming a spa, including:
- If the water temperature exceeds 115°F, the heater will turn off, and above 122°F all outputs will disable until cooled.
- The filtration cycle can be programmed to run 1, 2, or 3 times daily for 60, 120, 180, or 480 minutes each cycle.
- By default, the spa will filter for 1 hour every 24 hours, maintaining the temperature at 95°F.
- Instructions are provided for operating the pump, accessory, light, and adjusting the temperature settings.
- The system enters a freeze protection mode if the temperature drops below 59°F by turning the pump on periodically.
The document provides instructions for operating and programming a spa control system. It describes how the system handles high temperatures, allows setting filter cycles for 1-3 times daily and durations of 60-180 minutes, and will default to a 24-hour filter cycle at 95°F if power is lost. It also explains how to operate the pump, light, and change the temperature setting, and describes freeze protection and error identification features.
This document summarizes the revision history of PCB part number 33-0024-Rx from the initial R0 revision in January 1999 through the current R6 revision. It describes the changes made at each revision level such as PCB layout changes, software changes, additions of memory and removal of features. It also provides information to help identify the correct wiring diagram for a given revision level.
This document provides instructions for an Eco 1 timed filtration system. It states to press and hold the light button to change the duration of filtration, and to press and hold the pump button to change the number of times filtration will occur. It also provides contact information for My Pool and Spas, a wholesale pool and spa parts supplier.
The document provides instructions for setting various operating parameters of a pool or spa control system including time, filtration start/duration, temperature display units, panel lock, economy mode, freeze protection, and error conditions. It describes pressing the program key to access each setting and using up/down arrows to adjust before pressing program to save. It also lists default settings if power is lost.
The changes include:
- Two programmable filtration cycles, one for AM and one for PM.
- A new "Smart Summer Mode" that operates pumps and chlorinators during cooler times when temperatures exceed a threshold.
- Optional programming via Palm Pilot or keypad.
- New auxiliary circuit and circulation pump options.
- Updated owner's manuals to reflect changes.
This document provides contact information for a wholesale pool and spa parts business called MyPoolSpas.com. It lists their phone number as 920-925-3094. The business sells wholesale pool and spa parts.
This document provides contact information for a company called MyPoolSpas.com Spa Parts Wholesale Pool. They sell pool and spa parts and can be reached by calling 920-925-3094. The document lists the name of the company and their phone number.
The document provides instructions for programming various settings on an HT-2 / 9600 Series spa control system, including time of day, filtration cycle start time and duration, economy mode start time and duration, temperature units (Fahrenheit or Celsius), and a spa-side lock feature. It also describes low level programming options that can be changed by positioning jumpers on the system board, including pump, blower, light, ozone, fiber optics, clock, current, circulation pump, and sensor calibration settings.
The document discusses four jumpers on a system board that can be positioned to change parameters of an equipment system. Jumper 1 sets either a high or low current limit. Jumper 2 selects whether temperature is displayed in Fahrenheit or Celsius. Jumpers 3 and 4 determine if the pumps run as single or two speed pumps. Positioning the jumpers allows customizing the system's operation based on electrical specifications and pump configuration.
This document provides instructions for operating an infrared remote control for a pool or spa. It includes:
1. A key chart explaining the functions of each button on the remote control.
2. Instructions for programming the remote to control up to three home entertainment or automation devices by entering their unique four-digit codes.
3. Procedures for replacing batteries, searching for codes if a device is not responding, checking stored codes, and putting the remote into learning mode to add new functions from an original remote control.
The document provides instructions for programming a Palm Pilot PDA to communicate with and adjust the low-level programming of Hydro-Quip control systems. The PDA must have the Serve-Soft 2 software installed and unlocked using the username "Hydro-Quip" and password "Hq92u1". An ADIR-1 cartridge is used to connect the PDA to the control system. Low-level parameters can then be viewed and modified on the PDA screen by tapping selections. Additional features like current states, troubleshooting, and documentation can also be accessed.
1. EL1001 Mach 3 Tech Sheet
Balboa Instruments
System PN 54388-04
System Model # E1P-EL1001M3-DCAH
Software Version # 32
EPN # 2833
Base PCBA – PN 54389-04
PCB EL1000 – PN 22952 Rev B or C
HEX File – 10010432
Base Panels
ML400 – PN 52684
Template used: 40572-v32_A.pdf 04/16/2008
54388-04_97_A.pdf 04/30/2008
http://www.MyPoolSpas.com Wholesale Pool and Spa Parts
Page 1 920-925-3094
54388-04_97_A
2. System Revision History
System PN EPN Date Requested By Changes Made
54388-02 2130 11.16.2006 Balboa Software update to v28
54388-03 n/a 07.20.2007 Balboa Software update to v30
54388-04 2833 04.30.2008 Balboa Software update to v32
http://www.MyPoolSpas.com Wholesale Pool and Spa Parts
Page 2 920-925-3094
54388-04_97_A
3. Basic System Features and Functions
Power Requirements
240VAC, 60Hz, 40A, Class A GFCI-protected service (Circuit Breaker rating = 50A max.)
System Outputs
Setup 1 (As Manufactured)
Additional Options
Connects to Main Panel terminal J70 or J71 J2 K1
1 P1 LO 2 ALRM 3
K12 W9
G
W13
J96
Connects to Remote terminal J20
J39
U4
AUX. PANELS
Connects to terminal J9
J10
J80
J70
MAIN PANELS
J69 J20
ADCM REMOTE
J71
Connects to A.V. terminal J2 J4 J17 J15 J83
J22 J24 J82
A EXT TST AUX. F CFG SENS. A SENS. B VAC
http://www.MyPoolSpas.com Wholesale Pool and Spa Parts
Page 3 920-925-3094
54388-04_97_A
4. Persistent Memory and Powering Up
Any time you change DIP Switches or Software Configuration Settings that message on power up:
affect parameters the user can change (any filter settings, set temperature If “ ” appears before (and instead of) “ ” or
default, Celsius vs Fahrenheit, 12-hour vs 24-hour time, reminders “ ”, you have not configured DIP Switches and/or
suppression, etc), you must reset Persistent Memory for your DIP Switch or Software Configuration Settings in a valid manner. This must be corrected
Software Configuration Settings changes to take effect. You should also reset before you can reset Persistent Memory.
Persistent Memory after loading a new file into a board (using the ESM, The switch numbers, jumpers, or configuration settings displayed after
purchased seperately). “ ” are ones with which the system has found a configuration problem.
For example:
To reset Persistent Memory: “ ” would mean that the combination of how you’ve set
Power down. A5 and how you’ve set B2 is not supported on this system.
Set A12 ON (See illustration below). “ ” would mean that there is a problem with jumper J99
Power up. “ ” would mean that the combination of how
Wait until “ ” or “ ” is displayed on your panel. you’ve set pump 3 for 1-speed and blower for 1-speed is not supported
Note: If “ ” appears see section below. on this system.
Set A12 OFF. (This can be done safely with power on if you use a non- “ ” would mean that the combination of how you’ve
conductive tool such as a pencil to push the switch back to the OFF set DIP switches which have been assigned to pump 3 and blower is not
position. Otherwise, power down before setting A12 OFF) supported on this system.
Power up again (if you powered down in the previous step).
For all other power ups, leave A12 OFF. Power Up Display Sequence
Upon power up, you should see the following on the display:
About Persistent Memory and Time of Day Retention: Three numbers in a row, which are the SSID (the System Software
This system uses memory that doesn’t require a battery to store a variety ID). The third display of these numbers is the Software Version, which
of settings. What we refer to as Persistent Memory stores all the User should match the version of your system. For example, if these three
Preferences, as well as all the filter settings, the set temperature, and the numbers are , that is a Mach 3 EL8000 at version 26.
heat mode. If there is a Configuration Error, the message (see above) will
appear at this point (and none of the messages below will display).
Persistent Memory is not used for Time of Day. Time of Day needs to be Otherwise what comes next is:
“kept running” (not just stored) while the power is off, so a separate Real An indication of either the input voltage detected (EL1000/EL2000), or
Time Clock feature (on all models except the EL1000) keeps track of the heater wattage range supported (EL8000/GL2000/GL8000).
Time of Day while the unit is off. Time of Day Retention, and Time of Day Heater wattage display: “ ” means the system supports a heater
Retention alone, is controlled by the J91 jumper. J91 must be set according from 1 kW to 3 kW. “ ” means the system supports a heater
to main system panel used. from 3 kW to 6 kW. “ ” means the system supports a 3 kW
heater only. (These ranges may be modified slightly in the case of
Switchbank A Switchbank B
special heaters, which the next bullet covers.)
Input voltage display: A system showing “ ” supports 3 kW
to 6 kW heaters. A system showing “ ” supports the very same
heaters, although at 120V those heaters will function at only 1/4 of
their 240V rated wattage. (The system shows only either “ ” or
J91 J91 “ ” as a general indication of input voltage; it does not show the
RTC RTC
Enabled Disabled actual input voltage.)
(Not Jumpered) (Jumpered) If your system is using a special type of heater, a display such as “ ”
may appear next. If your system is using the generic Balboa heater, no
heater type display will appear.
“ ” or “ ” will appear to signal the start of
Priming Mode.
At this point, the power up sequence is complete. Refer to the User Guide
for the ML Series panel on your system for information about how the spa
operates from this point on.
http://www.MyPoolSpas.com Wholesale Pool and Spa Parts
Page 4 920-925-3094
54388-04_97_A
5. Wiring Configuration and DIP Settings
Setup 1 (As Manufactured)
FUSE 3A 250V
CLASS G FUSE 30A J11 J8 K4 J1 K11 F10 FUSE 10A 250V F4
F7
W
Light
1
12V Light
Spa
BLK
J12
J37
2
R
2-Spd P1
R
W
J95
12V-B
BLK AC J3 J9
24HR
Ozone 3 3
B
1
B
W7 J
J86
WHT AC 24hrs 2
J6
R
P1-LO
J85
W
W
K1 K12
Ozone
1
J2 W9
B
1 2 ALRM 3
W1
P1 LO M
J97
G
J19 J28 J43 J42 J48
G
J23
W13 J96
W
F2
NEUTRAL
WHITE
FUSE 0.3A 250V
T1
K12 runs
G
J39
with P1 Low
U4
J5
AUX. PANELS
12V-A
BLACK
HOT
TORQUE
J10
RANGE
RED
HOT
FOR TB1: J80
J70
27-30 IN. LBS.
K8
K7 TB1
MAIN PANELS
J69 J20
J53 J54 J55
F1
K6
J25 J26
RED AC ADCM REMOTE
J71
K13
Balboa J4 J17 J15 J83
J22 J24 J82
E.GND
Pb
EL1000 Mach III
P/N 22952 REV C
COPYRIGHT 2005
MADE IN U.S.A.
5.5 kW
HTR2 HTR1
EXT TST AUX. F CFG SENS. A SENS. B VAC
SWITCHBANK A
K1
R
BlowerG
B W
F5 W12 J6
X-B
F10A 250V
PN 53310
J2 J3
WARNING: Main Power to system should be turned OFF BEFORE adjusting DIP switches.
WARNING: Persistent Memory (A12) must be RESET to allow new DIP switch settings to take effect. (See Persistent Memory page)
SSID # Wiring Color Key
When the Logic Jumper is not installed on J83 (CFG),
DIP Switch Settings are enabled. 100
120 Volt Connections
104
DIP Switches will then operate as shown below.
AUX. F CFG SENS. A 32 240 Volt Connections
Black AC Jumpers
Switchbank A J3 J37 12 Volt Connections
3 1 Relay Control Wires
Circ/Ozone
2
24hrs 2 Board Connector Key
12 V
1 3
Light 1 Typically Line voltage
A1, Test Mode OFF A7, Cleanup Cycles OFF 2 Typically Line voltage for 2-speed pumps
A2, Low Amp
High Amp A8, Pump 2 Disabled 1 2 3 3 Neutral (Common)
A3, Filter by Time
Duration A9, No Circ Pump
J96 4 Ground
A4, 12 Hr Time A10, Blower Disabled(A8 Off)
Enabled
A5, Degrees F A11, Do Not Use K12 runs Note flat sides in connector
A6, Short Timeouts A12, Memory ON per J3
http://www.MyPoolSpas.com Wholesale Pool and Spa Parts
Page 5 920-925-3094
54388-04_97_A
6. DIP Switches and Jumpers Definitions
WARNING:
Setting DIP switches incorrectly may cause abnormal system behavior and/or damage to system components.
Refer to Switchbank illustration on Wiring Configuration page for correct settings for this system.
Contact Balboa if you require additional configuration pages added to this tech sheet.
DIP Switchbank A Key
A 1 . . . . . . . . . . . . . . . . Test Mode (normally Off)
A 2 . . . . . . . . . . . . . . . . In “ON” position, heater can run while any/all high-speed pumps or blowers are running. (High amperage)
. . . . . . . . . . . . . . . . In “OFF” position, heater is disabled while any high-speed pump or blower is running. (Low amperage)
A 3 . . . . . . . . . . . . . . . . In “ON” position, filter cycles are programmed by duration
. . . . . . . . . . . . . . . . In “OFF” position, filter cycles are programmed to start and end times
A 4 . . . . . . . . . . . . . . . . In “ON” position, displays time in 24 hours (military time)
. . . . . . . . . . . . . . . . In “OFF” position, displays 12 hour time
A 5 . . . . . . . . . . . . . . . . In “ON” position, displays temperature in Celsius
. . . . . . . . . . . . . . . . In “OFF” position, displays temperature in Fahrenheit
A 6 . . . . . . . . . . . . . . . . In “ON” position, Equipment timeout 30 minutes (4 hours for Pump 1 Low)
. . . . . . . . . . . . . . . . In “OFF” position, Equipment timeout 15 minutes (2 hours for Pump 1 Low)
A 7 . . . . . . . . . . . . . . . . In “ON” position, Cleanup Cycle – 30 minutes after spa use/timeout, Pump 1 Low & Ozone run for 1 hour.
. . . . . . . . . . . . . . . . In “OFF” position, no Cleanup Cycle
A 8 . . . . . . . . . . . . . . In “ON” position, enables Pump 2 (A10 must be Off)
. . . . . . . . . . . . . . . . In “OFF” position, disables Pump 2
A 9 . . . . . . . . . . . . . . In “ON” position, Circ Pump 24 Hours with 3˚F Shut-off. *See note below.
. . . . . . . . . . . . . . . . In “OFF” position, no Circ Pump
A 10 . . . . . . . . . . . . . . . In “ON” position, Blower enable when Pump 2 is disabled (A8 must be Off)
. . . . . . . . . . . . . . . . In “OFF” position, Blower disabled
A 11 . . . . . . . . . . . . . . . In “ON” position, DO NOT USE. *See note below.
. . . . . . . . . . . . . . . . In “OFF” position, Pump 1 is two-speed
A 12 . . . . . . . . . . . . . . . . Persistent memory reset (normally off) (used when spa is powering up)
*Note: For systems with a Circ Pump, software must be v30 or higher and requires X-03 expansion board to be installed. Also, the Ozone
generator, if installed, will be moved to X-03 board.
Jumpers
J3 Jumper on Pins 1 and 2 will power J9 (Ozone) with Pump 1 Low.
Jumper on Pins 2 and 3 will power J9 to run 24 hours.
J37 Jumper on Pins 1 and 2 will power one leg of J12 (Spa Light) at 120 Volts AC.
Jumper on Pins 2 and 3 will power one leg of J12 (Spa Light) at 12 Volts AC.
Note: W9 controls voltage on the other leg of J12 and must be set for the same voltage.
J96 Jumper on Pins 1 and 2 will operate the relay K12 with Pump 1 Low.
Jumper on Pins 2 and 3 will operate the relay K12 independently.
http://www.MyPoolSpas.com Wholesale Pool and Spa Parts
Page 6 920-925-3094
54388-04_97_A
7. Ozone Connections
Ozone Connector Voltage: The EL circuit board is factory configured to deliver a preset voltage (120V
or 240V) to the on-board ozone connector (J9). See the ratings table on the wiring diagram attached to
the cover of the enclosure for the configured voltage. For 240V output W13 connects to Red AC and for
120V output W13 connects to White AC.
The voltage to the ozone connector can be changed in the field if required. W13 just needs to be set for
the required voltage.
Balboa Ozone Generator: If the board is set up to operate a 120V ozone generator, the connector on the
ozone generator is likely to be configured correctly, but should be compared to the illustration below.
If a 240V ozone generator is required, be sure the red wire in the ozone cord is positioned in the
connector next to the green ground wire as described below.
Note: A special tool is required to remove the pins from the connector body once they are snapped in
place. Check with your Balboa Account Manager for information on purchasing a pin-removal tool.
Balboa Ozone connector configuration for 120V 60Hz B
Line - Black conductor
Use this slot for the leftover Red conductor
Common - Install the White conductor here for 120V ozone
G
Ground (Green) conductor
Flat sides of sockets as shown
Balboa Ozone connector configuration for 240V 60Hz B
Line - Black conductor
Use this slot for the leftover White conductor
Common - Install the Red conductor here for 240V ozone
G
Ground (Green) conductor
W13 wire determines voltage
FUSE 3A 250V
J1 K11 F10 FUSE 10A 250V F4
N
1
BLK
J12 Line - Black conductor
J37
2
R
G
J95
12V-B
J3 J9
Use this slot for the leftover conductor
24HR
3 3
B
W7 J86
2
Common - Red for 240V or
J6
P1-LO
J85
W
N
1 J2 K1 K12 W9
1 2 ALRM 3 White for 120V ozone (See W13 wire)
W1
P1 LO
J97
G
G
W13
J96 Ground (Green) conductor
T1
J39
U4
J5
AUX. PANELS
12V-A
J10
J80
J70
MAIN PANELS
J69 J20
F1
ADCM REMOTE
J71
K13
J4 J15 J22 J24 J82
J17 J83
E.GND
SWITCHBANK A EXT TST AUX F CFG SENS A SENS B VAC
http://www.MyPoolSpas.com Wholesale Pool and Spa Parts
Page 7 920-925-3094
54388-04_97_A
8. Panel Configurations
Note: Connects to Main Panel terminal J70 or J71
NON-TIME CAPABLE
Heat
Jets Aux Temp Light
ML400
PN 52684 with Overlay PN 11345
http://www.MyPoolSpas.com Wholesale Pool and Spa Parts
Page 8 920-925-3094
54388-04_97_A