- The MX series magnetic drive pumps feature an improved mechanical design that allows operation under abnormal conditions, reducing running and maintenance costs.
- The split-volute casing significantly improves pumping efficiency over previous models through efficient guidance of liquid to the discharge port.
- The simple yet robust construction allows for easy maintenance through reinforced stress-bearing portions and a reliably secured bearing design.
This document provides specifications for various hammer and pile driving equipment models made by IHC Hydrohammer BV. It lists technical details like maximum blow energy, blow rate, dimensions, weights, hydraulic requirements, and power pack specifications for their S Series and SC Series hammers. It also includes an illustration and description of the hammers' operating principle and notes on accessories.
Hyster a217 (n30 fr) forklift service repair manualufjjsjekkekmem
This document provides specifications and repair information for service on lift truck frames. It lists the basic components of the frame, including mounts for the mast, steering, electrical, hydraulic, and door/floor plate parts. Procedures are provided for replacing load wheels in the base arms and removing/replacing covers, panels and plates on the frame. The overhead guard fastens to the mast and caster is part of the steering axle assembly. Very little other repair is usually needed for the frame itself.
1) The document provides specifications for the RCP3-TA4C ROBO Cylinder, including its load capacity, positioning repeatability, maximum speed, and dimensions for different stroke lengths.
2) The cylinder can be equipped with ball screws of different lead sizes (2mm, 4mm, or 6mm) which impacts its load capacity and maximum speed.
3) The document lists compatible controller models for operating the cylinder, including solenoid valve types, positioner types, and program control types.
The document discusses the exhaust system and intake manifold of an XJ vehicle. It provides information on general components of the exhaust system, removal and installation of the exhaust pipe, muffler and tailpipe. It also describes removal and installation of the engine exhaust manifold and turbocharger. Key steps and torque specifications are outlined for servicing these components.
The document provides specifications for the RCP3-SA6R ROBO Cylinder slider type actuator. It includes details on speed and load capacity for different lead screw pitches, dimensions and weight by stroke length, compatible controllers, and actuator specifications. Maximum speeds decrease as stroke length increases to prevent the ball screw from reaching a critical rotational speed. Load capacity also decreases at higher speeds due to the pulse motor characteristics.
This document provides specifications for the RCP2-SA7C ROBO cylinder slider actuator. It includes details about the actuator such as its configuration, dimensions, load capacity at different speeds, compatible controllers, and more. The maximum load capacity decreases as the speed increases due to the pulse motor characteristics. The document also provides actuator specification tables that list dimensions, weights, and other parameters according to the stroke length.
The document describes pneumatic breakers made by Chicago Pneumatic for demolition and construction work. The new generation of CP breakers deliver power and durability for tough jobs while being easier for operators to use with streamlined designs. Models include the CP 1260 and CP 1290 which provide more power yet are lighter weight than previous models. The breakers are designed to be comfortable and efficient for operators.
The document provides information on various dual wheel and pneumatic casters including their specifications such as wheel diameter, tread width, load capacity, overall height, swivel lead, swivel radius, and wheel type. It lists numerous models of cantilever-style dual wheel casters under the 216 and 263 series, as well as pneumatic casters and other related products. The casters are suitable for loads ranging from 125 to 20,000 pounds.
This document provides specifications for various hammer and pile driving equipment models made by IHC Hydrohammer BV. It lists technical details like maximum blow energy, blow rate, dimensions, weights, hydraulic requirements, and power pack specifications for their S Series and SC Series hammers. It also includes an illustration and description of the hammers' operating principle and notes on accessories.
Hyster a217 (n30 fr) forklift service repair manualufjjsjekkekmem
This document provides specifications and repair information for service on lift truck frames. It lists the basic components of the frame, including mounts for the mast, steering, electrical, hydraulic, and door/floor plate parts. Procedures are provided for replacing load wheels in the base arms and removing/replacing covers, panels and plates on the frame. The overhead guard fastens to the mast and caster is part of the steering axle assembly. Very little other repair is usually needed for the frame itself.
1) The document provides specifications for the RCP3-TA4C ROBO Cylinder, including its load capacity, positioning repeatability, maximum speed, and dimensions for different stroke lengths.
2) The cylinder can be equipped with ball screws of different lead sizes (2mm, 4mm, or 6mm) which impacts its load capacity and maximum speed.
3) The document lists compatible controller models for operating the cylinder, including solenoid valve types, positioner types, and program control types.
The document discusses the exhaust system and intake manifold of an XJ vehicle. It provides information on general components of the exhaust system, removal and installation of the exhaust pipe, muffler and tailpipe. It also describes removal and installation of the engine exhaust manifold and turbocharger. Key steps and torque specifications are outlined for servicing these components.
The document provides specifications for the RCP3-SA6R ROBO Cylinder slider type actuator. It includes details on speed and load capacity for different lead screw pitches, dimensions and weight by stroke length, compatible controllers, and actuator specifications. Maximum speeds decrease as stroke length increases to prevent the ball screw from reaching a critical rotational speed. Load capacity also decreases at higher speeds due to the pulse motor characteristics.
This document provides specifications for the RCP2-SA7C ROBO cylinder slider actuator. It includes details about the actuator such as its configuration, dimensions, load capacity at different speeds, compatible controllers, and more. The maximum load capacity decreases as the speed increases due to the pulse motor characteristics. The document also provides actuator specification tables that list dimensions, weights, and other parameters according to the stroke length.
The document describes pneumatic breakers made by Chicago Pneumatic for demolition and construction work. The new generation of CP breakers deliver power and durability for tough jobs while being easier for operators to use with streamlined designs. Models include the CP 1260 and CP 1290 which provide more power yet are lighter weight than previous models. The breakers are designed to be comfortable and efficient for operators.
The document provides information on various dual wheel and pneumatic casters including their specifications such as wheel diameter, tread width, load capacity, overall height, swivel lead, swivel radius, and wheel type. It lists numerous models of cantilever-style dual wheel casters under the 216 and 263 series, as well as pneumatic casters and other related products. The casters are suitable for loads ranging from 125 to 20,000 pounds.
The document provides specifications for the RCP3-SA5R ROBO Cylinder. It includes details about speed and load capacity for different lead sizes, dimensions and weight by stroke length, compatible controllers, and actuator specifications. Load capacity decreases at higher speeds due to the pulse motor characteristics. Compatible controllers range from simple solenoid valve types to programmable and field network options.
Hyster b010 (s35 xl) forklift service repair manualufjjsekkemme
This document provides repair procedures and descriptions for a steering axle assembly. It describes the main components of the steering axle including the axle frame, steering cylinder, spindle assemblies, and wheel hubs. Safety warnings are provided for putting the lift truck on blocks before performing maintenance or repairs. Estimates are given for the weight of different lift truck models on the steering axle to help determine the lifting capacity needed. Torque specifications are also listed for various fasteners on the steering axle, steering cylinder, hydraulic pump, and other components.
Thomson super metric_ball_bushing_bearings_specsheetElectromate
The document describes new Super Metric Ball Bushing bearings and pillow blocks from Danaher Motion. The bearings offer low friction, self-alignment, high accelerations and speeds, integral wipers to keep out dirt, and adjustable open and closed configurations. The pillow blocks contain replaceable bearings, integral seals, and tapped or through-hole mounting for easy installation. They provide increased load capacity and travel life over single bearing versions.
This document provides instructions for replacing the common rail assembly on a 1CD-FTV engine. The main steps include:
1. Draining the engine coolant and removing various covers and tanks.
2. Removing the fuel inlet pipe sub-assembly and injection pipe sub-assemblies using special tools, while covering components to prevent contamination.
3. Removing the common rail assembly and related components, then installing the new common rail and reinstalling the injection pipe sub-assemblies, ensuring proper torque specifications are followed.
The EVS series is a high precision right-angle gearhead capable of handling large radial and thrust loads. It provides a compact footprint for applications requiring exceptional load handling capabilities. The tapered roller bearings at the output allow it to handle larger loads than typical planetary gearboxes. It has a maximum torque of 600 Nm and low backlash of 4 arc-minutes, making it suitable for applications requiring precise positioning like custom assembly and robotics.
The document provides specifications for the RCS2-RA5C ROBO Cylinder actuator. It includes details on the actuator such as stroke lengths available from 50 to 300mm, load capacities from 2 to 60kg depending on the model, and compatible servo motor outputs of 60W and 100W. Accessories like cable lengths, mounting brackets and encoders are also described.
This document provides specifications for the RCP3-SA4R ROBO Cylinder. It includes details about the pulse motor, load capacities at different speeds and leads, dimensions and weight by stroke length, compatible controllers, and cable options. Load capacity decreases at higher speeds due to the pulse motor characteristics. Dimensions and weight vary depending on the stroke length between 50-500mm. The cylinder can be operated by several controller options that vary based on features like positioning points, input voltage, and communication method.
Coel is a company that has been producing electric motors since 1976, specializing in induction and brake motors. They offer a wide range of standard and customized brake motors from frame size 56 to 315. Coel focuses on quality control by manufacturing components in-house and thoroughly testing products. The document provides information on Coel's motor features, performance data, structure types, and product series.
This document provides information on metal bellows vacuum pumps and compressors from OTSPumps&Compressors. It includes specifications for various models ranging from small portable pumps to larger industrial units. Application examples are given such as gas analysis, nuclear monitoring, semiconductor processing. The pumps share features like stainless steel construction, hermetic sealing, and maintenance-free operation. Customization is also offered for special requirements.
Torque Systems designs high-performance brush servo motors that provide efficiency, flexibility, and long service life. Their TORQUEMASTER 2600 series motors deliver smooth operation throughout a full speed range with fast response, accurate control, and high torque-to-inertia ratios. They provide superior low-speed performance and maximum power ratings for high-speed use while fitting in a smaller package for better pricing. When integrated with brush amplifiers, the 2600 series motors provide effective motion control solutions for applications like factory automation, packaging, robotics, and medical devices.
Torque Systems designs high-performance brushless servo motors, including the TORQUEMASTER 3300 series. These motors provide smooth operation throughout a full speed range with fast response, accurate control, and high torque-to-inertia ratios. When integrated with brush amplifiers, they provide effective motion control solutions for applications like factory automation. The 3300 series delivers superior low-speed and high-speed performance in a compact package. They are available in different torque and speed options with various feedback and mounting configurations.
This document provides information about heavy duty slurry pumps from Natus Mining Solutions, including:
- Pumps are available with rubber or metal linings to handle abrasive and corrosive slurries.
- Features include ultra-heavy duty construction, hard metal or elastomer linings, and innovative design.
- It describes the pump components like the shaft, impeller, sealing options, and materials used.
- Technical specifications and performance data are provided for various pump models.
Thomson Linear Super Metric Ball Bushing Bearings Electromate
The document describes new Super Metric Ball Bushing bearings and pillow blocks from Danaher Motion. The bearings offer low friction, self-alignment, high accelerations and speeds, integral wipers to keep out dirt, and adjustable open and closed configurations. The pillow blocks contain replaceable bearings, integral seals, and tapped or through-hole mounting for easy installation. They provide increased load capacity and travel life over single bearing versions.
Torque Systems designs high-performance brush servo motors, including the TORQUEMASTER 2100 series. These motors provide smooth operation throughout a full speed range with fast response, accurate control, and high torque-to-inertia ratios. The 2100 series delivers superior low-speed performance as well as maximum power ratings. When integrated with brush amplifiers, they provide effective motion control solutions for applications like factory automation, packaging, robotics, and more. The motors are available in different sizes rated from 12-53 oz-in of torque and speeds up to 6500 RPM. They can be customized with additional options.
Hyster a217 (n30 fr) forklift service repair manualfjsjekkmdmme
This document provides specifications and repair information for service repairs on various lift truck models. It lists lift capacities and settings for different models. It also details hydraulic system specifications, battery specifications, reach carriage specifications, and frame component repair procedures. The frame components include the frame weldment, door, floor plate, covers, and overhead guard. Procedures are provided for replacing load wheels and various covers and panels.
Hyster a217 (n30 fr) forklift service repair manualfjsekkdmme
This document provides specifications and repair information for service repairs on various lift truck models. It lists lift capacities for different models ranging from 3,000 to 5,000 pounds. It also provides settings for master drive units, control settings, hydraulic system specifications including lift pump capacities and relief valve pressures, battery specifications including sizes and weights, reach carriage specifications including stroke lengths and torque values, and descriptions of removing covers, panels and other frame components for repair.
Hyster a217 (n30 fr) forklift service repair manualfusjfjskekmem
This document provides specifications for service repair of various lift truck models. It includes the following information:
1. Lift capacities for different models ranging from 3,000 to 5,000 lbs.
2. Settings for components like the master drive unit, control settings, hydraulic system specifications, battery specifications, and reach carriage specifications.
3. Procedures for replacing load wheels on the base arms and removing/replacing covers, panels and plates on the frame. The frame supports various parts and can be repaired by removing necessary system components.
Hyster a217 (n30 fr) forklift service repair manualfusjejfskekemm
This document provides specifications for various parts and lift capacities for the N30FR, N40EA/ER, N40FR, N45ER, N45FR, N50EA, and N50FA lift truck models. Some key details include:
- The basic lift capacities for each model at a 24 inch and 500mm load center.
- Battery specifications like voltage, compartment size, and battery size/weight for each model.
- Hydraulic system specifications like pump output, relief valve pressures, and tank capacities.
- Reach carriage specifications like stroke lengths and torque specifications for each model.
- Frame repair procedures like replacing the load wheels.
The document provides specifications for Pacific Scientific T-Series NEMA 23 high torque motors, including torque ratings, phase configurations, connection options, and performance characteristics. It lists motor models, their holding torques in oz-in and N-m, phase currents, resistance, inductance, detent torque, thermal resistance, and inertia. Graphs show torque-speed curves for various motor models operated at different current levels.
This document provides information on various gearmotor series from Kollmorgen Motion Technologies Group. It summarizes the key specifications of the Accurex, Revex, Indurex, and Ferrite gearmotor series, including torque ratings, gear ratios, sizes, options, and performance data. The Accurex series offers virtually zero backlash, the Revex uses spur gear technology with less than 5 arc minutes of backlash, the Indurex has fully reversible helical gearing, and the Ferrite is compact and suitable for battery operation.
This document provides specifications and performance data for Pacific Scientific PowerMax II stepper motors and motor systems. It includes:
- Tables listing motor model numbers, ratings, and characteristics such as torque, current, resistance, and weight.
- Diagrams of standard shaft options and flying lead/connector lengths for various motor models.
- Curves showing torque-speed performance when using different PowerMax II stepper motors and microstepping drives in 24V, 36V and 72V systems.
- Information on 6210/6215 and 6410/6415 microstepping drives that are compatible with PowerMax II motors.
The document provides specifications, diagrams and performance data for selecting the appropriate
The document provides specifications for the RCP3-SA5R ROBO Cylinder. It includes details about speed and load capacity for different lead sizes, dimensions and weight by stroke length, compatible controllers, and actuator specifications. Load capacity decreases at higher speeds due to the pulse motor characteristics. Compatible controllers range from simple solenoid valve types to programmable and field network options.
Hyster b010 (s35 xl) forklift service repair manualufjjsekkemme
This document provides repair procedures and descriptions for a steering axle assembly. It describes the main components of the steering axle including the axle frame, steering cylinder, spindle assemblies, and wheel hubs. Safety warnings are provided for putting the lift truck on blocks before performing maintenance or repairs. Estimates are given for the weight of different lift truck models on the steering axle to help determine the lifting capacity needed. Torque specifications are also listed for various fasteners on the steering axle, steering cylinder, hydraulic pump, and other components.
Thomson super metric_ball_bushing_bearings_specsheetElectromate
The document describes new Super Metric Ball Bushing bearings and pillow blocks from Danaher Motion. The bearings offer low friction, self-alignment, high accelerations and speeds, integral wipers to keep out dirt, and adjustable open and closed configurations. The pillow blocks contain replaceable bearings, integral seals, and tapped or through-hole mounting for easy installation. They provide increased load capacity and travel life over single bearing versions.
This document provides instructions for replacing the common rail assembly on a 1CD-FTV engine. The main steps include:
1. Draining the engine coolant and removing various covers and tanks.
2. Removing the fuel inlet pipe sub-assembly and injection pipe sub-assemblies using special tools, while covering components to prevent contamination.
3. Removing the common rail assembly and related components, then installing the new common rail and reinstalling the injection pipe sub-assemblies, ensuring proper torque specifications are followed.
The EVS series is a high precision right-angle gearhead capable of handling large radial and thrust loads. It provides a compact footprint for applications requiring exceptional load handling capabilities. The tapered roller bearings at the output allow it to handle larger loads than typical planetary gearboxes. It has a maximum torque of 600 Nm and low backlash of 4 arc-minutes, making it suitable for applications requiring precise positioning like custom assembly and robotics.
The document provides specifications for the RCS2-RA5C ROBO Cylinder actuator. It includes details on the actuator such as stroke lengths available from 50 to 300mm, load capacities from 2 to 60kg depending on the model, and compatible servo motor outputs of 60W and 100W. Accessories like cable lengths, mounting brackets and encoders are also described.
This document provides specifications for the RCP3-SA4R ROBO Cylinder. It includes details about the pulse motor, load capacities at different speeds and leads, dimensions and weight by stroke length, compatible controllers, and cable options. Load capacity decreases at higher speeds due to the pulse motor characteristics. Dimensions and weight vary depending on the stroke length between 50-500mm. The cylinder can be operated by several controller options that vary based on features like positioning points, input voltage, and communication method.
Coel is a company that has been producing electric motors since 1976, specializing in induction and brake motors. They offer a wide range of standard and customized brake motors from frame size 56 to 315. Coel focuses on quality control by manufacturing components in-house and thoroughly testing products. The document provides information on Coel's motor features, performance data, structure types, and product series.
This document provides information on metal bellows vacuum pumps and compressors from OTSPumps&Compressors. It includes specifications for various models ranging from small portable pumps to larger industrial units. Application examples are given such as gas analysis, nuclear monitoring, semiconductor processing. The pumps share features like stainless steel construction, hermetic sealing, and maintenance-free operation. Customization is also offered for special requirements.
Torque Systems designs high-performance brush servo motors that provide efficiency, flexibility, and long service life. Their TORQUEMASTER 2600 series motors deliver smooth operation throughout a full speed range with fast response, accurate control, and high torque-to-inertia ratios. They provide superior low-speed performance and maximum power ratings for high-speed use while fitting in a smaller package for better pricing. When integrated with brush amplifiers, the 2600 series motors provide effective motion control solutions for applications like factory automation, packaging, robotics, and medical devices.
Torque Systems designs high-performance brushless servo motors, including the TORQUEMASTER 3300 series. These motors provide smooth operation throughout a full speed range with fast response, accurate control, and high torque-to-inertia ratios. When integrated with brush amplifiers, they provide effective motion control solutions for applications like factory automation. The 3300 series delivers superior low-speed and high-speed performance in a compact package. They are available in different torque and speed options with various feedback and mounting configurations.
This document provides information about heavy duty slurry pumps from Natus Mining Solutions, including:
- Pumps are available with rubber or metal linings to handle abrasive and corrosive slurries.
- Features include ultra-heavy duty construction, hard metal or elastomer linings, and innovative design.
- It describes the pump components like the shaft, impeller, sealing options, and materials used.
- Technical specifications and performance data are provided for various pump models.
Thomson Linear Super Metric Ball Bushing Bearings Electromate
The document describes new Super Metric Ball Bushing bearings and pillow blocks from Danaher Motion. The bearings offer low friction, self-alignment, high accelerations and speeds, integral wipers to keep out dirt, and adjustable open and closed configurations. The pillow blocks contain replaceable bearings, integral seals, and tapped or through-hole mounting for easy installation. They provide increased load capacity and travel life over single bearing versions.
Torque Systems designs high-performance brush servo motors, including the TORQUEMASTER 2100 series. These motors provide smooth operation throughout a full speed range with fast response, accurate control, and high torque-to-inertia ratios. The 2100 series delivers superior low-speed performance as well as maximum power ratings. When integrated with brush amplifiers, they provide effective motion control solutions for applications like factory automation, packaging, robotics, and more. The motors are available in different sizes rated from 12-53 oz-in of torque and speeds up to 6500 RPM. They can be customized with additional options.
Hyster a217 (n30 fr) forklift service repair manualfjsjekkmdmme
This document provides specifications and repair information for service repairs on various lift truck models. It lists lift capacities and settings for different models. It also details hydraulic system specifications, battery specifications, reach carriage specifications, and frame component repair procedures. The frame components include the frame weldment, door, floor plate, covers, and overhead guard. Procedures are provided for replacing load wheels and various covers and panels.
Hyster a217 (n30 fr) forklift service repair manualfjsekkdmme
This document provides specifications and repair information for service repairs on various lift truck models. It lists lift capacities for different models ranging from 3,000 to 5,000 pounds. It also provides settings for master drive units, control settings, hydraulic system specifications including lift pump capacities and relief valve pressures, battery specifications including sizes and weights, reach carriage specifications including stroke lengths and torque values, and descriptions of removing covers, panels and other frame components for repair.
Hyster a217 (n30 fr) forklift service repair manualfusjfjskekmem
This document provides specifications for service repair of various lift truck models. It includes the following information:
1. Lift capacities for different models ranging from 3,000 to 5,000 lbs.
2. Settings for components like the master drive unit, control settings, hydraulic system specifications, battery specifications, and reach carriage specifications.
3. Procedures for replacing load wheels on the base arms and removing/replacing covers, panels and plates on the frame. The frame supports various parts and can be repaired by removing necessary system components.
Hyster a217 (n30 fr) forklift service repair manualfusjejfskekemm
This document provides specifications for various parts and lift capacities for the N30FR, N40EA/ER, N40FR, N45ER, N45FR, N50EA, and N50FA lift truck models. Some key details include:
- The basic lift capacities for each model at a 24 inch and 500mm load center.
- Battery specifications like voltage, compartment size, and battery size/weight for each model.
- Hydraulic system specifications like pump output, relief valve pressures, and tank capacities.
- Reach carriage specifications like stroke lengths and torque specifications for each model.
- Frame repair procedures like replacing the load wheels.
The document provides specifications for Pacific Scientific T-Series NEMA 23 high torque motors, including torque ratings, phase configurations, connection options, and performance characteristics. It lists motor models, their holding torques in oz-in and N-m, phase currents, resistance, inductance, detent torque, thermal resistance, and inertia. Graphs show torque-speed curves for various motor models operated at different current levels.
This document provides information on various gearmotor series from Kollmorgen Motion Technologies Group. It summarizes the key specifications of the Accurex, Revex, Indurex, and Ferrite gearmotor series, including torque ratings, gear ratios, sizes, options, and performance data. The Accurex series offers virtually zero backlash, the Revex uses spur gear technology with less than 5 arc minutes of backlash, the Indurex has fully reversible helical gearing, and the Ferrite is compact and suitable for battery operation.
This document provides specifications and performance data for Pacific Scientific PowerMax II stepper motors and motor systems. It includes:
- Tables listing motor model numbers, ratings, and characteristics such as torque, current, resistance, and weight.
- Diagrams of standard shaft options and flying lead/connector lengths for various motor models.
- Curves showing torque-speed performance when using different PowerMax II stepper motors and microstepping drives in 24V, 36V and 72V systems.
- Information on 6210/6215 and 6410/6415 microstepping drives that are compatible with PowerMax II motors.
The document provides specifications, diagrams and performance data for selecting the appropriate
- This document provides specifications for a two-stage, 240V vacuum motor from Lamb Electric including dimensions, typical performance data at different voltages and orifice sizes, and important safety notes.
- Key details are that it is a 5.7" diameter motor with double ball bearings, single speed, through-flow discharge, and aluminum construction. Performance data includes airflow and vacuum output values across a range of orifice sizes.
- Cautions are provided that the motor is only intended for use with clean, dry, filtered air and should not be used in wet environments or where airflow may be restricted due to fire and electric shock risks.
This document provides technical specifications for Sicme Motori's SM-ML series of steel mill heavy duty DC motors. It includes details on:
- Motor design features for frames 802-804 and 806-818, including laminated cores, roller bearings, and optional components.
- Output data like power, speed, torque, and duty ratings for each frame size at 230V.
- Dimensional drawings and specifications for frames 802-804 and 806-812.
- Air flow requirements, weights, enclosure types and other technical details for each frame size.
The SM-ML series motors are designed for variable speed drives in heavy industrial applications like steel mills. They meet
Torque Systems designs high-performance brushless servo motors that provide efficiency, flexibility, and long service life. Their TORQUEMASTER 4400 series motors deliver fast response, accurate control, and high torque-to-inertia ratios for smooth operation throughout a full speed range. They are suitable for applications including factory automation, packaging, robotics, and medical devices. The 4400 series motors can be customized to meet specific requirements.
The document provides specifications for the RCP2CR-SS8C Cleanroom ROBO Cylinder. It includes:
1) A graph showing how load capacity decreases at higher speeds for the pulse motor.
2) Tables listing stroke lengths, maximum speeds, suction volumes and standard prices for different models.
3) Information on compatible controllers including their maximum positioning points, input voltages and standard prices.
This document provides specifications for two high-speed cylinder actuators: the RCS3-CT8C and RCS3-CTZ5C. The RCS3-CT8C has a maximum speed of 2500 mm/s and acceleration of 3.2G, and can be controlled by single or multi-axis controllers. The document includes tables listing the specifications, dimensions, compatible controllers, and options for each actuator model.
Similar to 4. Medium MX series - Polypropylene (20)
2. Abnormal operation
Normal operation
Self-radiating structure
Non-contact structure
Robust structure
Volute casing divided
into two sections
Illustration shows MX-250
The MX Series represents the latest state of the art design in plastic magnetic drive
pumps to meet the most severe of operating conditions.
When fitted with a carbon bearing the MX will allow for brief periods of dry running.
The new “self radiating structure” (PAT.) in addition to the existing proven non contact
principle and front and rear supported spindle greatly improves the pumps ability to
withstand some cavitation and running against closed discharge valve. Our innova-
tive design has achieved higher efficiency. MX series pumps are highly recommended
for use in various production processes such as filtering, spraying, washing and etch-
ing in surface treatment processes.
Even better dry-running resistance and efficiency
than previous models. Iwaki MX magnetic drive
pumps - reliable & energy efficient.
1
3. Front casing Rear casing
Front casing of type 100 and 402/403
Self-radiating structure (PAT.)
Through heat-dispersion holes provided
in the fixed portions of the impeller and
the magnet capsule, the liquid around
the spindle and the bearing is forced to
circulate so that heat generated by
sliding can be reduced effectively. Thus,
thermal deformation and melt are
prevented.
Non-contact structure
By installing the driving magnet and the
driven magnet in an inventive way, the
movement of the magnet capsule is
controlled by magnetic force to prevent
the rear thrust and the rear portion of
the bearing coming into contact with
each other continuously even during dry
running. This structure reduces heat
generation and secures lubricant routes.
(Except MX-70, 100)
Volute casing divided into two
sections (PAT.)
The MX series is the first resin magnet
pump which uses the pump casing
divided into the front casing and the rear
casing to form a vortex chamber as an
ideal form. Therefore, the internal leak
phenomenon, which means that the
liquid getting out of the impeller returns
to the pump casing and is suppressed to
a minimum and the liquid is efficiently
guided to the discharge port to enhance
overall efficiency.
Robust structure
All stress bearing portions, such as the
front and rear casings, are reinforced by
means of ribs to improve the pressure
resistance and the mechanical strength
of the pump.
The bearing is not only fixed by conven-
tional press fit but is also sandwiched
between the abutting portion in the
depth of the magnet capsule and the
rear end of the impeller to improve its
reliability under high temperature.
(Except MX-70, 100)
MX-402(H) and 403(H) models: an un-
plugging preventive lock pin is adopted
for ensuring more steady securing.
Heat-dispersion
holes
ImpellerMagnet capsule
Bearing
Rear thrust
Spindle
• An improved mechanical strength design allows operation under abnormal conditions
and results in reduction of running cost and maintenance cost.
• The split-volute casing significantly improves efficiency over previous versions.
• Simple yet robust construction allows easy maintenance.
2
IWAKI MAGNETIC DRIVE PUMPS MX
4. Wet end materials
MX-250 to 401MX-70,100 MX-402 to 403H
Note 1: An O-ring made of AFLAS® is also available
Mark AV(AE)
Model
Alumina ceramic
RV(RE)
MX-250 to 403H MX-250 to 401
GFRPP
PP
FKM(EPDM)
High purity alumina ceramic
PTFE(with filler)
CFRPPS (MX-402 to 403H: CFRPEEK)
PTFE(with filler)
Alumina ceramic
CV(CE)V(E)
GFRPPGFRPP
GFRPPGFRPP
Carbon
GFRPPS(Only available type 402 to 403H)
MX-100
PTFE(with filler)
PTFE(with filler)
MX-70
CFRPP
FKM(EPDM)
Alumina ceramic
CFRPPS
Alumina ceramic
-
-
- -
-
Note 1
1 Front casing
2 Impeller
3 Rear casing
4 Magnet capsule
5 O ring
6 Spindle
7 Bearing
8 Rear thrust
9 Mouth ring
10 Thrust/Liner ring
11 Lock pin
1
1
1
2
2
2 3
33
44
5
55
6
6
6
7
7
7
8
8
9
9
9
10
10
10
11
MX-403 MX-401
3
5. Common specifications
• Range of liquid temperature : 0 to 80˚C (10 to 80˚C in case AFLAS® O-rings are used.) • Range of ambient temperature : 0 to 40˚C.
Specifications
Note 1) The specific gravity limit values shown above are with maximum discharges. The specific gravity limit varies with the discharge. For details, please contact us.
Note 2) 26mm tube connection option available on the MX-70 and MX-100.
Note 3) AV(AE) type is defferent in discharge capacity. For details, please contact us.
MX-70M
Model
Connection
Suction X Discharge
Limit of
specific gravity
G1 x G1
G1 x G1
25A x 25A
25A x 25A
40A x 40A
40A x 40A
1.2
1.2
1.0
1.0
1.2
1.2
-
-
-
-
-
-
50
70
50
80
100
150
5.4 / 7.8
6 / 9
14 / 13.5
19
10.5 / 10
14.5
90 / 100
110 / 125
150
150
280
320
0.15 / 0.18
0.26
0.4
0.75
0.4
0.75
6.5
8.2
13.5
18.5
13.5
18.5
50A x 40A
50A x 40A
50A x 40A
50A x 40A
1.2
1.0
1.2
1.0
-
-
-
-
200
100
250
100
20/19.5
30
23 / 25
35 / 36
450
160
500
300 / 250
1.5
1.5
2.2
2.2
30.5
30.5
33
33
Standard capacity
L/min - m
Maximum capacity
L/min
Motor
kW
Mass
kg
MX-100M
MX-250
MX-251
MX-400
MX-401
MX-402
MX-402H
MX-403
MX-403H
Pump identification
MX : Material of Casing/GFRPP
Series symbol
No mark : Tube connection
(Fitting diameter:26mm)
Note: Applied to the models MX-70 and MX-100
M : Thread connection
Connection
MX V : FKM (O-ring)
E : EPDM (O-ring)
Materials
No mark : 1 phase 100V
11 : 1 phase 110V
13 : 1 phase 220V/240V
32 : 3 phase 200V/220V
33 : 3 phase 220/380V
34 : 3 phase 400/440V
Motor
70 : G1X G1 150W/180W
(MX series only available)
100 : G1X G1 260W
Pump size
MX : Material of Casing/GFRPP
250 : 25A X 25A 0.4kW
251 : 25A X 25A 0.75kW
400 : 40A X 40A 0.4kW
401 : 40A X 40A 0.75kW
402, 402H : 50A X 40A 1.5kW
403, 403H : 50A X 40A 2.2kW
Series symbol
Pump size
MX CV,CE : Carbon/Alumina ceramic/FKM(EPDM)
RV,RE : PTFE(with filler)/High purity alumina ceramic/FKM(EPDM)
AV,AE : High purity alumina ceramic/Alumina ceramic/FKM(EPDM)
Material of Bearing/Spindle/O-ring
MX 5 : 50Hz only
6 : 60Hz only
Impeller mark MX-250 to 401(Original motor 3phase)
2 : 200V, 220V(Only 60Hz)
3 : 220/380V
4 : 380/400/415(Only 50Hz)/440V(Only 60Hz)
MX-402(H) to 403(H) (IEC motor 3phase)
2 : 200V, 220V(Only 60Hz)
3 : 220/380V
6 : 380V
7 : 400V, 440V(Only 60Hz)
8 : 415(Only 50Hz)
Motor
Special specification:
Motor specification
No mark : TEFC indoor
C : TEFC outdoor
A : Increased safety type
(Except 2.2kW type)
No mark : Standard
S : Order-made specification
Note
MX - 100 V M - 32
MX - 250 CV 5 C - 2 S
MX-70 and 100
MX-250 to 403H
MX-250 MX-100 MX-70
4
IWAKI MAGNETIC DRIVE PUMPS MX
8. ( )Country codes
Actual pumps may differ from the photos. Specifications and dimensions are subject to change without prior notice. For further details please contact us.
TEL: (49)2154 9254 0
TEL: (31)547 293 160
TEL: (32)13 67 02 00
TEL: (45)48 24 2345
TEL: (358)9 2745810
TEL: (33)1 69 63 33 70
TEL: (49)2154 9254 50
TEL: (39)0444 371115
TEL: (47)23 38 49 00
TEL: (49)2154 9254 47
TEL: (46)8 511 72900
TEL: (41)26 674 93 00
TEL: (44)1743 231363
FAX: 2154 9254 48
FAX: 547 292 332
FAX: 13 67 20 30
FAX: 48 24 2346
FAX: 9 2742715
FAX: 1 64 49 92 73
FAX: 2154 9254 55
FAX: 0444 335350
FAX: 23 38 49 01
FAX: 2154 9254 48
FAX: 8 511 72922
FAX: 26 674 93 02
FAX: 1743 366507
: IWAKI Europe GmbH
: IWAKI Europe GmbH (Netherlands Branch)
: IWAKI Belgium N.V.
: IWAKI Nordic A/S
: IWAKI Suomi Oy
: IWAKI France S.A.
: IWAKI Europe GmbH
: IWAKI Europe GmbH (Italy Branch)
: IWAKI Norge AS
: IWAKI Europe GmbH (Spain Branch)
: IWAKI Sverige AB
: IWAKI (Schweiz) AG
: IWAKI Pumps (UK) Ltd.
Europeanoffice
Holland
Belgium
Denmark
Finland
France
Germany
Italy
Norway
Spain
Sweden
Switzerland
U.K.
EUROPE
www.iwakipumps.jp
Caution for safety use: Before use of pump, read instruction manual carefully to use the product correctly.
The posting and copying from this catalogue without permission is not accepted firmly.
Our products and/or parts of products fall in the category of goods contained in control list of international regime for export control.
Please be reminded that export license could be required when products are exported due to export control regulations of countries.
Legal attention related to export.
6-6 Kanda-Sudacho 2-chome Chiyoda-ku Tokyo 101-8558 Japan TEL : (81)3 3254 2935 FAX : 3 3252 8892
TEL: (852)2607 1168
TEL: (82)2 2630 4800
TEL: (60)3 7803 8807
TEL: (65)6316 2028
TEL: (62)21 6906606
TEL: (886)2 8227 6900
TEL: (66)2 322 2471
TEL: (84)613 933456
TEL: (61)2 9899 2411
TEL: (1)508 429 1440
TEL: (54)11 4745 4116
FAX: 2607 1000
FAX: 2 2630 4801
FAX: 3 7803 4800
FAX: 6316 3221
FAX: 21 6906612
FAX: 2 8227 6818
FAX: 2 322 2477
FAX: 613 933399
FAX : 2 9899 2421
FAX: 508 429 1386
: IWAKI Pumps Co., Ltd.
: IWAKI Korea Co.,Ltd.
: IWAKIm Sdn. Bhd.
: IWAKI Singapore Pte Ltd.
: IWAKI Singapore (Indonesia Branch)
: IWAKI Pumps Taiwan Co., Ltd.
: IWAKI (Thailand) Co.,Ltd.
: IWAKI Pumps Vietnam Co., Ltd.
: IWAKI Pumps Australia Pty Ltd.
: IWAKI America Inc.
: IWAKI America Inc. (Argentina Branch)
China
Korea
Malaysia
Singapore
Indonesia
Taiwan
Thailand
Vietnam
Australia
U.S.A.
Argentina
ASIA / OCEANIA / NORTH AMERICA / SOUTH AMERICA
CAT-A 0060-11 2013.02.2000.SXZ
DR-10 DR-20
Specification
Motor power 380 to 440V three phase
0.4 to 7.5kW
200 to 240V three phase
100 to 240V single phase
200 to 240V ±10%single phase100V ±10%single phase
3.5W
0.5 to 32.0A
Applied motor
Power
Power control
V
Input
D80 X W153 X H122
0.75 to 15kW
Built-in
Detective current
Current transformar(CT)
Outer dimension
Model
50/60Hz
Iwaki dry running protector DR series
Model DR is electric current sensing type dry running protector.
It detects the decreased load current (lower limit) to stop the
pump when it runs dry or runs with air sucking in. It can detect
over-load, too.
• Current figure to be set is indicated on LCD.
• Both top/bottom figures can be set.
Top:Over-load
Bottom:Dry running, air sucking-in operation, operation with suction side closed
• Built-in current transformer
• DIN rail mounting
• It is unable to use DR when inverter is employed in the system.
Optional accessories
Union joint (Option)
Special purpose union joints
are available.
Material : PVC/Heat
resistant PVC
DR-20
WL
a
4-øk
b
gc
ed
H
W
a
b
L
gc
f
ed
H
4-m 4-k 4-m 4-k
WL
a
b
gc
ed
H
Models
130
150
160
160
140
160
155
175
255
255
225
255
258.5
319.5
411
444
411
457
110
110
130
130
110
130
48
51
65
65
54
72
40
70
130
130
98
130
65
75
115
115
95
115
90
100
140
140
130
140
53
65
90
90
87
103
159.5
162
163
171
150
184
7
9
12
12
12
12
-
-
-
-
11
27
MX-70
MX-100
MX-250
MX-251
MX-400
MX-401
W H L a b c d e f g k m
in mm
260 280 516 208 80 200 120 160 89 157 14 36MX-402, 402H, 403, 403H
Dimensions
Note 1: MX-70 and MX-100 shows thread type in the above dimensions, Please contact us for tube connection type.
Note 1
Note 1
MX-70, 100 MX-250 to 401 MX-402, 402H, 403, 403H
IWAKI MAGNETIC DRIVE PUMPS MX