3 g second carrier optimization report – cluster2_

•Download as PPT, PDF•

3 likes•1,587 views

This report analyzes the impact of deploying a second carrier on a 3G network in Cluster 2. It shows drive test results and key performance indicators (KPIs) before and after the deployment. The KPIs measure aspects like accessibility, retainability, mobility, and traffic. The report finds that after deploying the second carrier, HS throughput per user increased in the cluster's sectors, indicating key improvements to network performance.

Technology

3G Second Carrier Optimization Report – Cluster2
Abstract
This Report shows, for Cluster 2 Sites
 Cluster Drive Test Results
 KPIs before and after Second Carrier deployment
 Key Improvements after Second Carrier deployment
on Wataniya Kuwait 3G Network, Second Carrier 149 project.

Cluster 2 Sites: Map Info view

Commercial in confidence 2

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster Cell List

Commercial in confidence 3

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster Cell List

Commercial in confidence 4

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster Parameters
Cluster 2 Cell parameters
Cell level (F2)

qRxLevMin

HoType

usedFreqThresh
2dEcNo

usedFreqThresh
2dRSCP

Inner

-107

GSM_Preferred

-12

-100

Border

-89

IFHO_Preferred

-8*

-95*

UtranRelation
level

qOffset2sn

F2 to F1

2**

F1 to F2 co-site

-2**

Cluster cells and
parameters

*For border cells, tuning of 2d parameters was done to avoid drops occurring at good Ecno and
RSCP
**For cells that showed high imbalance (F2 taking most traffic), qoffset2sn was set to 0 in both
direction

Cluster 2 Area cells

Clusters Area

Commercial in confidence 5

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster2 :- Second Carrier Sites On-Air Dates

Commercial in confidence 6

3G Second Carrier Optimization Report – Cluster4 – 149 Project

F1 : RSCP Plot (upper part)

Commercial in confidence 7

3G Second Carrier Optimization Report – Cluster4 – 149 Project

F1 : RSCP Plot (lower part)

Commercial in confidence 8

3G Second Carrier Optimization Report – Cluster4 – 149 Project

F2 : RSCP Plot (upper part)

Commercial in confidence 9

3G Second Carrier Optimization Report – Cluster4 – 149 Project

F2 : RSCP Plot (lower part)

Commercial in confidence 10

3G Second Carrier Optimization Report – Cluster4 – 149 Project

F1 : Ec/Io Plot (upper part)

Commercial in confidence 11

3G Second Carrier Optimization Report – Cluster4 – 149 Project

F1 : Ec/Io Plot (lower part)

Commercial in confidence 12

3G Second Carrier Optimization Report – Cluster4 – 149 Project

F2 : Ec/Io Plot (upper part)

Commercial in confidence 13

3G Second Carrier Optimization Report – Cluster4 – 149 Project

F2 : Ec/Io Plot (lower part)

Commercial in confidence 14

3G Second Carrier Optimization Report – Cluster4 – 149 Project

F1 : Best Server Plot (upper part)

Commercial in confidence 15

3G Second Carrier Optimization Report – Cluster4 – 149 Project

F1 : Best Server Plot (lower part)

Commercial in confidence 16

3G Second Carrier Optimization Report – Cluster4 – 149 Project

F2 : Best Server Plot (upper part)

Commercial in confidence 17

3G Second Carrier Optimization Report – Cluster4 – 149 Project

F2 : Best Server Plot (lower part)

Commercial in confidence 18

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs : Accessibility : RRC Setup Success rate – F1
Cluster Unlocked

Commercial in confidence 19

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs : Accessibility : RRC Setup Success rate – F2
Cluster Unlocked

Commercial in confidence 20

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Accessibility : RAB Setup Success rate- CS – F1
Cluster Unlocked

Commercial in confidence 21

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Accessibility : RAB Setup Success rate- CS – F2
Cluster Unlocked

Commercial in confidence 22

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Accessibility : RAB Setup Success rate- CS – F1 and F2

Cluster Unlocked

Commercial in confidence 23

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Accessibility : RAB Setup Success rate- PS –F1
Cluster Unlocked

Commercial in confidence 24

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Accessibility : RAB Setup Success rate- PS –F2
Cluster Unlocked

Commercial in confidence 25

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Accessibility : RAB Setup Success rate- PS – F1 and F2
Cluster Unlocked

Commercial in confidence 26

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Retainability : RAB Drop Rate – CS – F1
Cluster Unlocked

Commercial in confidence 27

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Retainability : RAB Drop Rate – CS – F2
Cluster Unlocked

Commercial in confidence 28

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Retainability : RAB Drop Rate – CS – F1 and F2
Cluster Unlocked

Commercial in confidence 29

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Retainability : CS RAB Drop Reasons – F1

Cluster Unlocked

Commercial in confidence 30

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Retainability : CS RAB Drop Reasons – F2

Cluster Unlocked

Commercial in confidence 31

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Mobility : CS Soft Handover – F1
Cluster Unlocked

Commercial in confidence 32

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Mobility : CS Soft Handover – F2

Cluster Unlocked

Commercial in confidence 33

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Mobility : PS Soft Handover – F1

Cluster Unlocked

Commercial in confidence 34

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Mobility : PS Soft Handover – F2
Cluster Unlocked

Commercial in confidence 35

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Mobility : HS Cell Change – F1

Cluster Unlocked

Commercial in confidence 36

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Mobility : HS Cell Change – F2

Cluster Unlocked

Commercial in confidence 37

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Mobility : IRAT Hard Handover – F1

Cluster Unlocked

Commercial in confidence 38

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Mobility : IRAT Hard Handover – F2

Cluster Unlocked

Commercial in confidence 39

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Traffic : Speech and HSDPA – F1

Commercial in confidence 40

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Traffic : Speech and HSDPA – F2

Commercial in confidence 41

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Traffic : MAC – HS – Data Volume (Mb) – F1

Commercial in confidence 42

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Cluster 2 KPIs: Traffic : MAC – HS – Data Volume (Mb) – F2

Commercial in confidence 43

3G Second Carrier Optimization Report – Cluster4 – 149 Project

*

Sector level – Average of F1 and F2 Cells

Cluster 2 :Key Improvements
HS Throughput per user
2604– Sector 1

Commercial in confidence 44

3G Second Carrier Optimization Report – Cluster4 – 149 Project

*

Sector level – Average of F1 and F2 Cells

Cluster 2 :Key Improvements
HS Throughput per user
2974– Sector 1

Commercial in confidence 45

3G Second Carrier Optimization Report – Cluster4 – 149 Project

*

Sector level – Average of F1 and F2 Cells

Cluster 2 :Key Improvements
HS Throughput per user
2990– Sector 2

Commercial in confidence 46

3G Second Carrier Optimization Report – Cluster4 – 149 Project

Commercial in confidence 47

3G Second Carrier Optimization Report – Cluster4 – 149 Project

This document discusses key performance indicators (KPIs) for evaluating 3G networks. It describes various KPIs for measuring accessibility, retainability, mobility, coverage, service integrity, availability, and traffic. Formulas for calculating several KPIs are provided. Troubleshooting methods and examples are given for accessibility, retainability, and mobility-related issues. Sample daily reports and the Gsmart optimization tool interface are also shown.

Fast return to 3 g

Mankotia Munish

This document discusses a feature called Fast Return to WCDMA (FASTRET3G) that allows user equipment to select a WCDMA network after a call disconnect on a 2G network. This is intended to reduce load on the 2G network by encouraging reselection to 3G, reduce page outage time for subscribers, and improve a key performance indicator for call drops on the secondary dedicated control channel. The document outlines objectives of the feature, that it has no network impact, pre-checks needed before activation like ensuring 2G-3G handover is set up, and plans to test it in a cluster with the highest number of 3G sites and worst 2G call drop rates.

Umts Kpi

Kishore Kandi

The document discusses key performance indicators (KPIs) for 3G radio networks. It provides an overview of important KPIs such as call setup success rate, call drop rate, and data throughput. It describes methods for measuring KPIs including drive testing, stationary testing, and statistical analysis. The document also discusses how to optimize radio networks by adjusting parameters and resolving issues to improve KPIs like accessibility, retainability, and service integrity. Case studies demonstrate analyzing and troubleshooting KPI issues.

Umts access kpi troubleshooting guide rrc

Prashant Gaurav

This document provides a troubleshooting guide for UMTS access KPI issues. It includes: 1. An overview of the UMTS access signaling flow and definitions of related performance statistics and KPIs. 2. A classification of RRC access failure root causes such as resource congestion, RF problems, and equipment alarms. 3. Guidance on analyzing access failure data and counters to diagnose issues related to causes like CE congestion, power limitations, or code shortages. 4. Recommended solutions for optimizing access performance issues related to resource congestion.

Wcdma Radio Network Planning And Optimization

Pengpeng Song

The document discusses WCDMA radio network planning and optimization, including key topics such as: 1) Fundamentals of WCDMA link budget analysis and radio interface protocol architecture. 2) Radio resource utilization techniques like power control, handover control, and congestion control. 3) Issues of coverage and capacity planning as well as enhancement methods. 4) The process of WCDMA radio network planning including dimensioning, detailed planning, and optimization aspects to address interference.

2 g and 3g kpi improvement by parameter optimization (nsn, ericsson, huawei) ...

Jean de la Sagesse

The document discusses key performance indicators (KPIs) for 2G and 3G networks and how top telecom vendors like Ericsson, Huawei, and NSN optimize parameters to improve these KPIs. It outlines techniques for reducing TCH blocking, SD blocking, TCH drop, HOSR, TASR, SD drop, and improving paging success rate through actions like changing configuration parameters, enabling features, addressing hardware issues, and optimizing cells physically. The optimization of these parameters can help maintain balance between network throughput, capacity and radio quality while ensuring a seamless transition between 2G and 3G.

Lte optimization

tharinduwije

This document provides guidelines for LTE radio frequency (RF) network optimization. It describes the network optimization process including single site verification and RF optimization. Key aspects of RF optimization covered include preparing for optimization by collecting data, analyzing problems related to coverage, signal quality and handover success rate, and adjusting parameters like transmit power, antenna tilts and neighboring cell configurations. Common issues addressed are weak coverage, coverage holes, lack of a dominant cell, and cross coverage between cells. Optimization methods and specific cases are presented to resolve different problems.

Chap 4. call processing and handover.eng

sivakumar D

This document provides a 3-sentence summary of the key information: The document outlines the network architecture and protocol stacks used in LTE networks, including components like the UE, eNB, MME, S-GW and P-GW. It describes the software architecture of eNBs and the call processing blocks. It also summarizes several important procedures in LTE networks like attach, detach, handover, and basic parameter configuration.

This document provides information on radio frequency (RF) optimization for WCDMA networks. It discusses the position of RF optimization in the network optimization process. The specific RF optimization process involves dividing the network into clusters, determining test routes, and performing drive tests to analyze coverage, pilot pollution, and handover issues. The goal of RF optimization is to ensure normal signal distribution and meet key performance indicators for coverage and handover before further optimizing service parameters. Troubleshooting techniques are also presented to address potential coverage problems like poor coverage, cross coverage, and areas without a dominant cell.

02 rn31572 en20gla1_kpi_overview

Zhi Huang

The document discusses key performance indicators (KPIs) for 3G networks. It covers principles of 3G network optimization, including defining KPIs, monitoring counters, and tuning radio access network parameters. It provides examples of KPIs such as call setup success rate and blocking rate. It also describes new measurements and counters being introduced in the RU20 reporting suite to improve performance monitoring.

Rf optimisation

Anto Radde

RF optimisation aims to identify and resolve potential faults in the network before they affect performance through activities like pre-launch optimisation, continuous optimisation, and swap management. Key aspects of optimisation include drive testing, parameter tuning, antenna adjustments, and monitoring KPIs to maintain network quality. GTL provides end-to-end optimisation services both on-site and through a virtual optimisation centre with remote analytics, tools, and concentrated RF expertise.

Kpi info

yuleslide

This document provides an overview and analysis of key performance indicators (KPIs) for 3G network drive testing. It includes: 1) An overview of the types of 3G KPIs including field measurement, radio access network (RAN), core network, and end-to-end KPIs. 2) Factors that can affect network performance such as equipment quality, network planning, implementation, operation and maintenance. 3) Examples of field measurement KPIs including coverage, accessibility, retainability, service quality, and mobility KPIs as well as the formulas used to calculate them.

Optimisation guide line ver1.1

Chandra Deria

This document provides guidelines for optimizing 3G networks through neighbor optimization and coverage adjustments. The objectives are to have an optimum number of neighbors to clean up pilot pollution, reduce overshooting, increase capacity, and reduce the possibility of soft congestion conflicts. The methodology involves deleting and adding neighbors based on data from the OSS, as well as adjusting antenna tilting. The optimization sequence is outlined, including guidelines for neighbor deletion, addition of different neighbor types, and planning of the SIB11. The end goal is to have fewer than 36 total neighbors and avoid blocking alarms due to too many neighbors.

How to resolve irat kpi issue in huawei

ehsan roustaei

This document provides techniques to improve IRAT KPI (Inter-RAT handover Key Performance Indicator) in a Huawei WCDMA network. It discusses two main ways: 1) basic 2G cell information and neighbor definition optimization and 2) parameter optimization. Specific steps discussed include optimizing 2G cell information sharing with 3G, checking 2G GPRS/EDGE KPI, optimizing the 2G neighbor definition, analyzing failure counters and alarms for problem 3G cells, and adjusting parameters like the 2G signal threshold, penalty time, RelocIuRelCmdTmr, and T309 timers. The goal is to ensure good 2G signal quality when 3G performs inter-RAT handovers to 2G

NSN NOKIA 3G KPI for Network planning and optimization

Yogender Singh Rana

Top 10 3 G Radio Optimisation Actions

Abdul Muin

This document provides guidance on optimizing 3G radio network performance. It begins by discussing network planning best practices and the importance of proper site placement. The document then describes various checks that should be performed to evaluate network health, including alarms, software/parameters, neighbors, cell load, and KPIs. Potential issues that could impact performance are also outlined. The document concludes by listing the top 10 optimization activities that can improve call performance for common issues as well as voice, video, PS, and ISHO-specific problems. Guidance is provided on tools that can be used for optimization, including field measurement tools for drive testing.

Munendra Singh Jadon LTE Optimization

Munendra singh jadon

This document provides a summary of Munendra Singh's professional experience and technical skills for an RF Optimization role focusing on LTE networks. It outlines his 5+ years of experience optimizing networks for various global operators, including expertise in monitoring KPIs, troubleshooting issues, parameter changes, and providing optimization reports. It also lists his proficiency with various optimization tools and technical skills related to LTE planning, optimization, and analysis.

Lte kpis

Anil kumar

1) The document describes key performance indicators (KPIs) for measuring the performance of an LTE radio network. It discusses KPIs related to accessibility, retainability, mobility, and latency. 2) Accessibility KPIs measure aspects like call setup success rate, RRC setup success rate, and E-RAB setup success rate. Retainability KPIs measure call drop rate and call setup completion rate. Mobility KPIs measure handover success rates within LTE and between LTE and other technologies. 3) For each KPI, the document provides a definition, calculation formula, and description of which network events and counters are needed to measure the KPI. Baseline

Wcdma dt analysis using TEMS Investigation

Michael Ofili

The document discusses drive test and call quality test procedures for analyzing mobile network coverage and service performance. It provides an introduction to the test tools used, including phones and data cards that support UMTS, HSDPA, HSUPA, EDGE, and GPRS technologies. Key metrics analyzed include signal strength, quality, throughput rates, call setup success, handover success, call drops, and delays. Issues examined include overshooting, pilot pollution, and missing neighbors. Potential solutions involve adjusting antenna parameters, modifying configuration settings, and optimizing base station placement and power levels.

wcdma-drive-test-analysis-ppt-libre

Narcisse FOIDIENG

The document discusses drive test analysis for mobile networks. It describes the key elements of an effective drive test program including understanding network performance using call and data metrics. The drive test process involves defining test routes and clusters, collecting data, analyzing key performance indicators (KPIs) like call setup success rate and throughput, and troubleshooting issues. Defining test cases, KPIs, and categorizing failures is important for understanding genuine network problems versus measurement errors.

Wcdma radio-network-optimization-guide

Dobrin Dobrev

The document provides a guide for optimizing WCDMA radio networks. It outlines the workflow which includes project preparation, single site verification, RF optimization, service optimization, and output reporting. Each step of the workflow is described in detail, covering objectives, preparation, drive testing, data analysis, parameter adjustment recommendations, and benchmarks. Optimization techniques involve adjusting engineering parameters, radio parameters like neighbor lists, and addressing issues related to coverage, interference, call drops, and service quality.

Lte drivetest guideline with genex assistant

Ray KHASTUR

This document discusses how to use Genex Assistant software to create LTE network reports from drive test data. It provides step-by-step instructions on setting up a new project, importing engineer parameters and log files, analyzing the data to plot maps and statistics for metrics like throughput, RSRP, SINR, and more. The procedures are described for both cluster reports analyzing multiple log files together and SSV reports analyzing individual sites. The goal is to effectively report on key performance indicators to evaluate network coverage, quality, and user experience.

51 gsm bss network performance ps kpi (upload rate) optimization manual[1].doc

tharinduwije

This document provides guidance on optimizing upload rate performance in GSM networks. It discusses factors that affect the upload rate such as uplink bandwidth, uplink coding scheme selection and adjustment, timely return of ACK messages, and TBF establishment and release flows. It provides analysis and recommendations for optimizing aspects like uplink bandwidth allocation, adjusting uplink coding schemes based on signal quality, and modifying power control parameters. The overall goal is to analyze and address differences between upload and download performance optimization.

EMERSON EDUARDO RODRIGUES huawei-gsm-bss-kpi-analysis

EMERSON EDUARDO RODRIGUES

Sagar Kuchekar_LTE_RF_Optimization Engineer

Sagar Kuchekar

This document contains a resume for Sagar Maruti Kuchekar. It includes details about his education, work experience in telecom domains like LTE, GSM and device testing over 3 years, and skills with technologies such as RF planning and optimization. It also lists his academic qualifications, past employers and roles, including as an RF planning and optimization engineer, and responsibilities carried out in each role.

Radio network optimization flow 20090429-a-4.0

Mashaal322

This document provides an overview of Huawei's radio network optimization work flow. It begins by outlining the objectives of the course as helping readers understand the workflow, master its key points, and standardize radio network planning. It then describes the four phases of the network lifecycle and how radio network planning and optimization services fit within each phase. The remainder of the document details the specific procedures and key considerations for initial tuning, network performance improvement, interference analysis, neighbor cell optimization, RF parameter optimization, VIP guarantee, network performance monitoring, and customer acceptance.

Wcdma RNO RF optimization

Zineddine Menani

The document discusses optimization of 3G radio networks, focusing on the RF Optimization phase. It describes the various stages of network optimization including single site verification, RF optimization of clusters of sites, parameter optimization testing, and ongoing reference route testing and analysis. The RF Optimization process involves preparing clusters and drive routes, analyzing data to identify issues, determining solutions such as antenna adjustments, implementing changes, and retesting. Analysis approaches discussed include examining cell dominance, coverage, interference, uplink coverage, pilot pollution, neighbor lists, soft handover performance, and drop calls.

3G NEWORK OPTIMIZATION DOCUMENT

Ballary Venkateswara

The document discusses the history and development of 3G mobile communication technology, specifically UMTS. It provides details on: - The evolution from 1G to 2G mobile networks and the need for 3G to support higher data rates and multimedia services. - The standardization of UMTS through ETSI and ITU, focusing on the two selected radio transmission technologies - UTRA FDD and TDD. - The architecture of 3G UMTS networks, including frequency reuse techniques used to maximize capacity within limited spectrum availability.

3 g optimization interview topics

Bouziane Beldjilali

The key performance indicators for measuring 3G cell performance include accessibility metrics like RRC success rate, RAB success rate, and CSSR. Retainability is measured by dropped call rates for speech, video, and packet switched connections. Mobility is measured by handover success rates between cells and between 3G and 2G networks. Factors that affect HSDPA throughput include downlink power, the number of downlink codes allocated for HSDPA, and transport channel capacity. Tuning parameters like increasing the number of HSDPA codes or changing the scheduling algorithm can improve HSDPA throughput.

Umts Radio Interface System Planning And Optimization

David Rottmayer

The document discusses planning and optimizing UMTS radio networks. It begins with an overview of UMTS network architecture and the differences between UMTS and GSM radio system planning. Key aspects of UMTS planning include coverage and capacity planning occurring simultaneously, as capacity requirements influence coverage. The document then covers WCDMA air interface specifications, propagation environments, and the UMTS radio system planning process. It discusses challenges such as varying traffic levels and distributions. The document provides a typical link budget example and explains transmitter, receiver, and channel parameters considered in UMTS coverage planning.

What's hot

Training wcdma rf optimization gsm to umts

Abed Abed

02 rn31572 en20gla1_kpi_overview

Zhi Huang

Rf optimisation

Anto Radde

Kpi info

yuleslide

Optimisation guide line ver1.1

Chandra Deria

How to resolve irat kpi issue in huawei

ehsan roustaei

NSN NOKIA 3G KPI for Network planning and optimization

Yogender Singh Rana

Top 10 3 G Radio Optimisation Actions

Abdul Muin

Munendra Singh Jadon LTE Optimization

Munendra singh jadon

Lte kpis

Anil kumar

Wcdma dt analysis using TEMS Investigation

Michael Ofili

wcdma-drive-test-analysis-ppt-libre

Narcisse FOIDIENG

Wcdma radio-network-optimization-guide

Dobrin Dobrev

Lte drivetest guideline with genex assistant

Ray KHASTUR

51 gsm bss network performance ps kpi (upload rate) optimization manual[1].doc

tharinduwije

EMERSON EDUARDO RODRIGUES huawei-gsm-bss-kpi-analysis

EMERSON EDUARDO RODRIGUES

Sagar Kuchekar_LTE_RF_Optimization Engineer

Sagar Kuchekar

Radio network optimization flow 20090429-a-4.0

Mashaal322

Wcdma RNO RF optimization

Zineddine Menani

What's hot (19)

Training wcdma rf optimization gsm to umts

02 rn31572 en20gla1_kpi_overview

Rf optimisation

Kpi info

Optimisation guide line ver1.1

How to resolve irat kpi issue in huawei

NSN NOKIA 3G KPI for Network planning and optimization

Top 10 3 G Radio Optimisation Actions

Munendra Singh Jadon LTE Optimization

Lte kpis

Wcdma dt analysis using TEMS Investigation

wcdma-drive-test-analysis-ppt-libre

Wcdma radio-network-optimization-guide

Lte drivetest guideline with genex assistant

51 gsm bss network performance ps kpi (upload rate) optimization manual[1].doc

EMERSON EDUARDO RODRIGUES huawei-gsm-bss-kpi-analysis

Sagar Kuchekar_LTE_RF_Optimization Engineer

Radio network optimization flow 20090429-a-4.0

Wcdma RNO RF optimization

Viewers also liked

3G NEWORK OPTIMIZATION DOCUMENT

Ballary Venkateswara

3 g optimization interview topics

Bouziane Beldjilali

Umts Radio Interface System Planning And Optimization

David Rottmayer

Part 1 fundamentals of 3 g

Henry Chikwendu

The document provides information on the fundamentals and evolution of 3G mobile communication standards. It discusses: - 1st generation standards including AMPS, TACS, NMT, and others operating between 30-200 KHz. - 2nd generation standards including GSM, IS-136, IS-95, and PDC operating at 200 KHz, utilizing TDMA and early digital technologies. - UMTS (3G) evolution through 3GPP releases, utilizing WCDMA technology, and achieving speeds up to 2 Mbps through improvements like HSPA and LTE.

3 g interview question & answer by telsol360

Tel sol

Part 2 planning of 3G

Henry Chikwendu

The document discusses UMTS planning and dimensioning processes. It describes: 1) The overall planning process which includes system dimensioning, radio network planning, pre-launch optimization, performance monitoring, and post-launch optimization. 2) The inputs, assumptions, and steps used for air interface dimensioning which includes uplink and downlink link budget analysis to determine coverage requirements and capacity needs. 3) Traffic modelling and load calculation methods to estimate subscriber traffic per cell based on factors like subscriber density, traffic profiles, and cell area.

Part 3 optimization 3G

Henry Chikwendu

This document discusses network optimization techniques including: 1. Monitoring key performance indicators (KPIs) such as transmitted carrier power, code tree allocation, and channel element allocation to identify issues. 2. Performing analysis of KPIs to locate root causes of failures in specific network elements or cells. 3. Proposing solutions such as adjusting signal transmission power limits, code tree rearrangement, or adding network capacity to address problems identified through monitoring and analysis.

Viewers also liked (7)

3G NEWORK OPTIMIZATION DOCUMENT

3 g optimization interview topics

Umts Radio Interface System Planning And Optimization

Part 1 fundamentals of 3 g

3 g interview question & answer by telsol360

Part 2 planning of 3G

Part 3 optimization 3G

Similar to 3 g second carrier optimization report – cluster2_

C20 20090615-019-alu csfb-performance_enhance

Emmanuel Msumali

This document proposes optimizations to reduce latency for circuit switched fallback (CSFB) from LTE to 1xRTT networks. It identifies several areas in the existing 1xRTT procedures where latency can be reduced, including skipping the timing change and update overhead information substates if the UE already has the necessary timing and configuration information. It also proposes techniques like pre-hashing or disabling hashing temporarily to reduce the latency from carrier and paging channel hashing when the UE switches from LTE to 1xRTT. The optimizations aim to improve CSFB call setup latency without requiring changes to 3GPP standards.

LTE Release 13 and SMARTER – Road Towards 5G

Yi-Hsueh Tsai

2016 03 21 Gamma Nu Theta USA

Anthony McCray

Gamma Nu Theta is a mobile communication antenna company with strong R&D, production, and logistics capabilities. It has over 23 employees in its R&D center including 5 PhDs. The company has a long history starting in 1997 and has locations in both Korea and the US. It provides a wide range of antenna products and has been a top supplier for major Korean carriers. Gamma Nu Theta invests heavily in R&D including electromagnetic simulation tools, an anechoic chamber for testing, and a simultaneous PIM measurement system. It has a quality management system certified to TL9000 and ISO14001 standards.

M b slides diagnostics 3-schmidgall_v7, 2010

goodgolier

This document discusses diagnostic communication within networks based on AUTOSAR configuration. It describes how diagnostic communication routing has become more complex with different network types. The AUTOSAR gateway uses layer 4 routing and its performance depends on parameters like block size and timeouts configured in the PduRouter. Properly configuring these parameters for each bus segment and gateway is challenging due to varying requirements for different diagnostic scenarios. The document concludes that the PduRouter's functionality for gateway activities like routing, buffer handling and timing needs further discussion within the AUTOSAR community.

E2 e+call+setup+time+(cst)+enhacenments p3_benchmarking

Otseakemhe

This document provides suggestions to help operators reduce call setup time (CST) in benchmark tests. It describes enhancements that can be made to WCDMA RAN, LTE RAN, EPC, IMS, MSS and UDM networks. For each enhancement, it discusses the impacted domains, pros, cons, dependencies and references. The primary focus is on improving CST without compromising network performance. Local teams should evaluate which enhancements fit their specific network conditions and priorities.

15 - Introduction to Optimization Tools Rev A.ppt

MohamedShabana37

This document provides an overview of TEMS Investigation and TEMS Visualization, two optimization tools from Ericsson. TEMS Investigation allows users to collect, analyze, and post-process network data to verify and optimize UMTS, GSM, GPRS, and EDGE networks. It helps troubleshoot issues like dropped calls, coverage imbalance, pilot pollution and missing neighbors. TEMS Visualization analyzes statistics from Ericsson's OSS to identify problems like missing neighbors, pilot polluters and call issues using a call event analyzer and other features. The document describes the capabilities and interface of both tools.

RF Planning Training

Ahmed Mohamed Ahmed Nossier

SON Server Web KPI Portal 4G DT Analysis Cases Module.pptx

ssuser2b76bb

SON (Self Organized Network) software automates various network optimization functions including automatic neighbor relations, coverage optimization, interference management, and sleeping cell detection and resolution. Key SON modules identify issues like crossed antennas, scrambling code collisions, and outage compensation. Intelligent reports in BSNL's KPI web portal provide insights into network performance and issues found through drive testing like orientation mismatches, cable swaps, and poor signal interference between sites.

Consolidated lte network soft optimization 20170814

Otseakemhe

The LTE network optimization work done resulted in improved mobility and uplink traffic performance. Scheduling request and CQI resources were tuned on worst sites, reducing PUCCH congestion to 0 and increasing uplink traffic by 10GB on average. Inactivity timers were tuned on worst sites from 61s to 10s, improving initial connection success rates and eliminating RRC and handover preparation failures related to CU limitations. These parameter tunings addressed issues on worst performing sites.

NSN HSDPA Parameters

S.M ADIL ALI

This document provides step-by-step instructions for performing Rel-5 transmitter and receiver characteristic tests and performance tests according to 3GPP TS 34.121 using the R&S CMU200 instrument. It describes the generic call setup for the transmitter characteristic tests using a 12.2 kbps reference measurement channel. Test cases that require additional instruments like a fading simulator are also discussed. Example measurement configurations and test parameters for each test are provided.

1 cm72 1e

Adil Syed Ali

This document provides step-by-step instructions for performing 3GPP Rel-5 transmitter characteristics, receiver characteristics, and performance tests using the R&S CMU200 instrument. It covers tests such as maximum output power, code domain power accuracy, spectrum emission mask, error vector magnitude, channel quality indicator reporting, and HS-SCCH detection performance. The document also includes *.sav files for recalling predefined test configurations for a UE supporting band I and power class 3.

CV_Rajneesh Mohan(7.10 Year)

Rajneesh Mohan

Yaskawa_SGM_SGDB_Manual_20206894630.pdf

ElievertonSantana

This document provides an overview and specifications for Yaskawa E Series AC servodrives, including SGMG/SGMS/SGMD/SGMP servomotors and SGDB SERVOPACKs. The summary covers servomotor and SERVOPACK ratings and configurations, connection diagrams, installation instructions, and MECHATROLINK communication specifications. Adjustments and settings are described to optimize servo performance for different applications.

Visteon_FMF

Peter Tiagunov

The document provides an overview of the Flexible Manufacturing Framework (FMF). It describes FMF as a set of standards and modular components for manufacturing execution, including error-proofed instructions, communication protocols, and common operator interfaces. The main objectives of FMF are to provide standardized and manageable manufacturing solutions by assembling reusable modules and leveraging open protocols. FMF was developed based on lessons learned from multiple Visteon sites and aims to reduce custom code, applications, and dependencies across sites. Currently over 60% of operations at several Visteon sites utilize FMF solutions.

New Services and Markets Technology Enablers (SMARTER) - LTE Relese 13+ and r...

Yi-Hsueh Tsai

Rafał Szarecki - PIM-tunnels and MPLS P2MP as Multicast data plane in IPTV a...

PROIDEA

The document discusses two customer case studies using multicast data plane technologies for IPTV and MVPN applications. For Customer A, plain IP multicast with PIM was used, which allowed for ACTIVE-ACTIVE protection only on specific topologies. Traffic restoration depended on IGP convergence and PIM signaling. For Customer B, MPLS P2MP LSPs were used, allowing for ACTIVE-ACTIVE protection on any topology. MPLS capabilities provided bandwidth reservation and faster ~50ms traffic restoration compared to PIM which relied on full protocol convergence. Both solutions are commercially deployed but MPLS P2MP provided better control and restoration characteristics for the large scale of Customer B's network.

University of benin gra 15082012

Ogundiran Joseph

This report summarizes the results of a radio network drive test conducted at the University of Benin to optimize coverage for MTN. Key performance indicators like Rxlev, RxQual, and SQI were tested along predefined test routes. The analysis found that Rxlev was above -85dBm for 99.99% of measurements in idle mode but only 88.21% in dedicated mode, indicating coverage issues for some calls. The RxQual and SQI metrics also showed room for improvement in certain areas. Based on the results, adjustments were recommended for one cell, including increasing the tilt and adjusting handover margins with neighbors.

Satisha Kumar_RF Engg(3G)_3.6 year

satish kumar kulkarni

This document provides a summary of Satisha Kumar's professional experience and qualifications. Some key points: - Satisha has over 3.6 years of experience in RF planning and optimization for 3G cellular networks working with Ericsson India. - Professional experience includes radio network optimization, planning, parameter tuning, drive test analysis and troubleshooting. - Onsite project experience with DTAC in Thailand, where Satisha helped with the integration of new sites, optimization, and clearing customer issues. - Technical skills include the use of planning, optimization and analysis tools from Ericsson, TEMS and other vendors. - Certifications include Ericsson RNO, RAN and RND certifications.

Mobdiea lte overview_2nd_marketing_2014_0423_최종

Kevin Kang

The document discusses LTE carrier aggregation technology. It describes Qualcomm's LTE carrier aggregation test projects in South Korea with various mobile device manufacturers. It also outlines Ericsson's LTE optimization projects with telecom operators in Saudi Arabia and South Korea. Finally, it provides background information on 3GPP LTE release 10 and release 11 specifications related to carrier aggregation configurations and bandwidth classifications.

Initial tuning umts (2)

Emerson Eduardo Rodrigues Von Staffen

The document discusses initial tuning, which is an integral part of the radio network design process. It aims to ensure the radio network performs according to the design before commercial service. Key activities include preparation, drive testing, analysis, implementing changes, and reporting. The initial tuning process involves assessing aspects like parameter consistency, coverage, interference, neighbor relations and more to optimize network performance.

Similar to 3 g second carrier optimization report – cluster2_ (20)

C20 20090615-019-alu csfb-performance_enhance

LTE Release 13 and SMARTER – Road Towards 5G

2016 03 21 Gamma Nu Theta USA

M b slides diagnostics 3-schmidgall_v7, 2010

E2 e+call+setup+time+(cst)+enhacenments p3_benchmarking

15 - Introduction to Optimization Tools Rev A.ppt

RF Planning Training

SON Server Web KPI Portal 4G DT Analysis Cases Module.pptx

Consolidated lte network soft optimization 20170814

NSN HSDPA Parameters

1 cm72 1e

CV_Rajneesh Mohan(7.10 Year)

Yaskawa_SGM_SGDB_Manual_20206894630.pdf

Visteon_FMF

New Services and Markets Technology Enablers (SMARTER) - LTE Relese 13+ and r...

Rafał Szarecki - PIM-tunnels and MPLS P2MP as Multicast data plane in IPTV a...

University of benin gra 15082012

Satisha Kumar_RF Engg(3G)_3.6 year

Mobdiea lte overview_2nd_marketing_2014_0423_최종

Initial tuning umts (2)

Recently uploaded

Serial Arm Control in Real Time Presentation

tolgahangng

Monitoring and Managing Anomaly Detection on OpenShift.pdf

Tosin Akinosho

Monitoring and Managing Anomaly Detection on OpenShift Overview Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices. Key Topics Covered 1. Introduction to Anomaly Detection - Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems. 2. Understanding Edge (IoT) - Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source. 3. What is ArgoCD? - Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices. 4. Deployment Using ArgoCD for Edge Devices - Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD. 5. Introduction to Apache Kafka and S3 - Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions. 6. Viewing Kafka Messages in the Data Lake - Learn how to view and analyze Kafka messages stored in a data lake for better insights. 7. What is Prometheus? - Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices. 8. Monitoring Application Metrics with Prometheus - Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system. 9. What is Camel K? - Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes. 10. Configuring Camel K Integrations for Data Pipelines - Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow. 11. What is a Jupyter Notebook? - Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text. 12. Jupyter Notebooks with Code Examples - Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.

Fueling AI with Great Data with Airbyte Webinar

Zilliz

Programming Foundation Models with DSPy - Meetup Slides

Zilliz

Azure API Management to expose backend services securely

Dinusha Kumarasiri

WeTestAthens: Postman's AI & Automation Techniques

Postman

Driving Business Innovation: Latest Generative AI Advancements & Success Story

Safe Software

Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency. During the hour, we’ll take you through: Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board. Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes. Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI. We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI. This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!

Artificial Intelligence for XMLDevelopment

Octavian Nadolu

In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject. We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup. Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved. The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring. The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise. By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.

Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack

shyamraj55

Best 20 SEO Techniques To Improve Website Visibility In SERP

Pixlogix Infotech

5th LF Energy Power Grid Model Meet-up Slides

DanBrown980551

5th Power Grid Model Meet-up It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology. Power Grid Model The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services. Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability. Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization. What to expect For the upcoming meetup we are organizing, we have an exciting lineup of activities planned: -Insightful presentations covering two practical applications of the Power Grid Model. -An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024. -An interactive brainstorming session to discuss and propose new feature requests. -An opportunity to connect with fellow Power Grid Model enthusiasts and users.

June Patch Tuesday

Ivanti

Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.

leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...

alexjohnson7307

Taking AI to the Next Level in Manufacturing.pdf

ssuserfac0301

Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as: 1. How quickly AI is being implemented in manufacturing. 2. Which barriers stand in the way of AI adoption. 3. How data quality and governance form the backbone of AI. 4. Organizational processes and structures that may inhibit effective AI adoption. 6. Ideas and approaches to help build your organization's AI strategy.

Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf

Malak Abu Hammad

Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers: * What is Vector Search? * Importance and benefits of vector search * Practical use cases across various industries * Step-by-step implementation guide * Live demos with code snippets * Enhancing LLM capabilities with vector search * Best practices and optimization strategies Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications. #MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology

Recommendation System using RAG Architecture

fredae14

Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...

Tatiana Kojar

Skybuffer AI, built on the robust SAP Business Technology Platform (SAP BTP), is the latest and most advanced version of our AI development, reaffirming our commitment to delivering top-tier AI solutions. Skybuffer AI harnesses all the innovative capabilities of the SAP BTP in the AI domain, from Conversational AI to cutting-edge Generative AI and Retrieval-Augmented Generation (RAG). It also helps SAP customers safeguard their investments into SAP Conversational AI and ensure a seamless, one-click transition to SAP Business AI. With Skybuffer AI, various AI models can be integrated into a single communication channel such as Microsoft Teams. This integration empowers business users with insights drawn from SAP backend systems, enterprise documents, and the expansive knowledge of Generative AI. And the best part of it is that it is all managed through our intuitive no-code Action Server interface, requiring no extensive coding knowledge and making the advanced AI accessible to more users.

HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU

panagenda

Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/ DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen! Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell. Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten. Diese Themen werden behandelt - Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten - Wie funktionieren CCB- und CCX-Lizenzen wirklich? - Verstehen des DLAU-Tools und wie man es am besten nutzt - Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw. - Praxisbeispiele und Best Practices zum sofortigen Umsetzen

Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr

saastr

Nordic Marketo Engage User Group_June 13_ 2024.pptx

MichaelKnudsen27

Recently uploaded (20)

Serial Arm Control in Real Time Presentation

Monitoring and Managing Anomaly Detection on OpenShift.pdf

Fueling AI with Great Data with Airbyte Webinar

Programming Foundation Models with DSPy - Meetup Slides

Azure API Management to expose backend services securely

WeTestAthens: Postman's AI & Automation Techniques

Driving Business Innovation: Latest Generative AI Advancements & Success Story

Artificial Intelligence for XMLDevelopment

Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack

Best 20 SEO Techniques To Improve Website Visibility In SERP

5th LF Energy Power Grid Model Meet-up Slides

June Patch Tuesday

leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...

Taking AI to the Next Level in Manufacturing.pdf

Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf

Recommendation System using RAG Architecture

Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...

HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU

Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr

Nordic Marketo Engage User Group_June 13_ 2024.pptx

3 g second carrier optimization report – cluster2_

1. 3G Second Carrier Optimization Report – Cluster2 Abstract This Report shows, for Cluster 2 Sites  Cluster Drive Test Results  KPIs before and after Second Carrier deployment  Key Improvements after Second Carrier deployment on Wataniya Kuwait 3G Network, Second Carrier 149 project.

2. Cluster 2 Sites: Map Info view Commercial in confidence 2 3G Second Carrier Optimization Report – Cluster4 – 149 Project

3. Cluster Cell List Commercial in confidence 3 3G Second Carrier Optimization Report – Cluster4 – 149 Project

4. Cluster Cell List Commercial in confidence 4 3G Second Carrier Optimization Report – Cluster4 – 149 Project

5. Cluster Parameters Cluster 2 Cell parameters Cell level (F2) qRxLevMin HoType usedFreqThresh 2dEcNo usedFreqThresh 2dRSCP Inner -107 GSM_Preferred -12 -100 Border -89 IFHO_Preferred -8* -95* UtranRelation level qOffset2sn F2 to F1 2** F1 to F2 co-site -2** Cluster cells and parameters *For border cells, tuning of 2d parameters was done to avoid drops occurring at good Ecno and RSCP **For cells that showed high imbalance (F2 taking most traffic), qoffset2sn was set to 0 in both direction Cluster 2 Area cells Clusters Area Commercial in confidence 5 3G Second Carrier Optimization Report – Cluster4 – 149 Project

6. Cluster2 :- Second Carrier Sites On-Air Dates Commercial in confidence 6 3G Second Carrier Optimization Report – Cluster4 – 149 Project

7. F1 : RSCP Plot (upper part) Commercial in confidence 7 3G Second Carrier Optimization Report – Cluster4 – 149 Project

8. F1 : RSCP Plot (lower part) Commercial in confidence 8 3G Second Carrier Optimization Report – Cluster4 – 149 Project

9. F2 : RSCP Plot (upper part) Commercial in confidence 9 3G Second Carrier Optimization Report – Cluster4 – 149 Project

10. F2 : RSCP Plot (lower part) Commercial in confidence 10 3G Second Carrier Optimization Report – Cluster4 – 149 Project

11. F1 : Ec/Io Plot (upper part) Commercial in confidence 11 3G Second Carrier Optimization Report – Cluster4 – 149 Project

12. F1 : Ec/Io Plot (lower part) Commercial in confidence 12 3G Second Carrier Optimization Report – Cluster4 – 149 Project

13. F2 : Ec/Io Plot (upper part) Commercial in confidence 13 3G Second Carrier Optimization Report – Cluster4 – 149 Project

14. F2 : Ec/Io Plot (lower part) Commercial in confidence 14 3G Second Carrier Optimization Report – Cluster4 – 149 Project

15. F1 : Best Server Plot (upper part) Commercial in confidence 15 3G Second Carrier Optimization Report – Cluster4 – 149 Project

16. F1 : Best Server Plot (lower part) Commercial in confidence 16 3G Second Carrier Optimization Report – Cluster4 – 149 Project

17. F2 : Best Server Plot (upper part) Commercial in confidence 17 3G Second Carrier Optimization Report – Cluster4 – 149 Project

18. F2 : Best Server Plot (lower part) Commercial in confidence 18 3G Second Carrier Optimization Report – Cluster4 – 149 Project

19. Cluster 2 KPIs : Accessibility : RRC Setup Success rate – F1 Cluster Unlocked Commercial in confidence 19 3G Second Carrier Optimization Report – Cluster4 – 149 Project

20. Cluster 2 KPIs : Accessibility : RRC Setup Success rate – F2 Cluster Unlocked Commercial in confidence 20 3G Second Carrier Optimization Report – Cluster4 – 149 Project

21. Cluster 2 KPIs: Accessibility : RAB Setup Success rate- CS – F1 Cluster Unlocked Commercial in confidence 21 3G Second Carrier Optimization Report – Cluster4 – 149 Project

22. Cluster 2 KPIs: Accessibility : RAB Setup Success rate- CS – F2 Cluster Unlocked Commercial in confidence 22 3G Second Carrier Optimization Report – Cluster4 – 149 Project

23. Cluster 2 KPIs: Accessibility : RAB Setup Success rate- CS – F1 and F2 Cluster Unlocked Commercial in confidence 23 3G Second Carrier Optimization Report – Cluster4 – 149 Project

24. Cluster 2 KPIs: Accessibility : RAB Setup Success rate- PS –F1 Cluster Unlocked Commercial in confidence 24 3G Second Carrier Optimization Report – Cluster4 – 149 Project

25. Cluster 2 KPIs: Accessibility : RAB Setup Success rate- PS –F2 Cluster Unlocked Commercial in confidence 25 3G Second Carrier Optimization Report – Cluster4 – 149 Project

26. Cluster 2 KPIs: Accessibility : RAB Setup Success rate- PS – F1 and F2 Cluster Unlocked Commercial in confidence 26 3G Second Carrier Optimization Report – Cluster4 – 149 Project

27. Cluster 2 KPIs: Retainability : RAB Drop Rate – CS – F1 Cluster Unlocked Commercial in confidence 27 3G Second Carrier Optimization Report – Cluster4 – 149 Project

28. Cluster 2 KPIs: Retainability : RAB Drop Rate – CS – F2 Cluster Unlocked Commercial in confidence 28 3G Second Carrier Optimization Report – Cluster4 – 149 Project

29. Cluster 2 KPIs: Retainability : RAB Drop Rate – CS – F1 and F2 Cluster Unlocked Commercial in confidence 29 3G Second Carrier Optimization Report – Cluster4 – 149 Project

30. Cluster 2 KPIs: Retainability : CS RAB Drop Reasons – F1 Cluster Unlocked Commercial in confidence 30 3G Second Carrier Optimization Report – Cluster4 – 149 Project

31. Cluster 2 KPIs: Retainability : CS RAB Drop Reasons – F2 Cluster Unlocked Commercial in confidence 31 3G Second Carrier Optimization Report – Cluster4 – 149 Project

32. Cluster 2 KPIs: Mobility : CS Soft Handover – F1 Cluster Unlocked Commercial in confidence 32 3G Second Carrier Optimization Report – Cluster4 – 149 Project

33. Cluster 2 KPIs: Mobility : CS Soft Handover – F2 Cluster Unlocked Commercial in confidence 33 3G Second Carrier Optimization Report – Cluster4 – 149 Project

34. Cluster 2 KPIs: Mobility : PS Soft Handover – F1 Cluster Unlocked Commercial in confidence 34 3G Second Carrier Optimization Report – Cluster4 – 149 Project

35. Cluster 2 KPIs: Mobility : PS Soft Handover – F2 Cluster Unlocked Commercial in confidence 35 3G Second Carrier Optimization Report – Cluster4 – 149 Project

36. Cluster 2 KPIs: Mobility : HS Cell Change – F1 Cluster Unlocked Commercial in confidence 36 3G Second Carrier Optimization Report – Cluster4 – 149 Project

37. Cluster 2 KPIs: Mobility : HS Cell Change – F2 Cluster Unlocked Commercial in confidence 37 3G Second Carrier Optimization Report – Cluster4 – 149 Project

38. Cluster 2 KPIs: Mobility : IRAT Hard Handover – F1 Cluster Unlocked Commercial in confidence 38 3G Second Carrier Optimization Report – Cluster4 – 149 Project

39. Cluster 2 KPIs: Mobility : IRAT Hard Handover – F2 Cluster Unlocked Commercial in confidence 39 3G Second Carrier Optimization Report – Cluster4 – 149 Project

40. Cluster 2 KPIs: Traffic : Speech and HSDPA – F1 Commercial in confidence 40 3G Second Carrier Optimization Report – Cluster4 – 149 Project

41. Cluster 2 KPIs: Traffic : Speech and HSDPA – F2 Commercial in confidence 41 3G Second Carrier Optimization Report – Cluster4 – 149 Project

42. Cluster 2 KPIs: Traffic : MAC – HS – Data Volume (Mb) – F1 Commercial in confidence 42 3G Second Carrier Optimization Report – Cluster4 – 149 Project

43. Cluster 2 KPIs: Traffic : MAC – HS – Data Volume (Mb) – F2 Commercial in confidence 43 3G Second Carrier Optimization Report – Cluster4 – 149 Project

44. * Sector level – Average of F1 and F2 Cells Cluster 2 :Key Improvements HS Throughput per user 2604– Sector 1 Commercial in confidence 44 3G Second Carrier Optimization Report – Cluster4 – 149 Project

45. * Sector level – Average of F1 and F2 Cells Cluster 2 :Key Improvements HS Throughput per user 2974– Sector 1 Commercial in confidence 45 3G Second Carrier Optimization Report – Cluster4 – 149 Project

46. * Sector level – Average of F1 and F2 Cells Cluster 2 :Key Improvements HS Throughput per user 2990– Sector 2 Commercial in confidence 46 3G Second Carrier Optimization Report – Cluster4 – 149 Project

47. Commercial in confidence 47 3G Second Carrier Optimization Report – Cluster4 – 149 Project

3 g second carrier optimization report – cluster2_

Recommended

Recommended

More Related Content

What's hot

What's hot (19)

Viewers also liked

Viewers also liked (7)

Similar to 3 g second carrier optimization report – cluster2_

Similar to 3 g second carrier optimization report – cluster2_ (20)

Recently uploaded

Recently uploaded (20)

3 g second carrier optimization report – cluster2_