Khan Mohd Eshtiaque, is currently a Masters in Management student at IE Business School. Previously, he interned as an M&A summer analyst at BDO's corporate finance division in Dubai, where he worked in deals in a variety of sectors including, natural resources, healthcare, facilities management, technology, real estate, utilities and agribusiness. Prior to that, Eshtiaque interned at the Private Banking department of HSBC.
Khan Mohd Eshtiaque, is currently a Masters in Management student at IE Business School. Previously, he interned as an M&A summer analyst at BDO's corporate finance division in Dubai, where he worked in deals in a variety of sectors including, natural resources, healthcare, facilities management, technology, real estate, utilities and agribusiness. Prior to that, Eshtiaque interned at the Private Banking department of HSBC.
Macroeconomic analysis of Indian Aviation IndustryManas Kasliwal
A detailed analysis of aviation industry and all the macroeconomic factors affecting the sector. Also, covered is the various segments of Indian Aviation
A key constituent of the Indian economy that accounts for about five percent of the GDP, the Indian chemical industry has vital associations with several other industries such as automotives, consumer durables, food processing, iron and steel, textiles, paper, and engineering, among others. It is the eighth largest sector in the world and the third largest in Asia by volumes, after China and Japan. This report encompasses an assessment of the chemicals industry in India, within the context of the global industry, and the opportunities and challenges it presents. The country’s chemical industry was estimated at USD 91 billion in 2011 and we believe that it has the potential to reach USD 134 billion by 2015 growing at a CAGR of 10 percent. The growth is expected to be driven by rising demand in end-use segments and expanding exports fuelled by increasing export competitiveness. The dynamics that propel the industry, namely opportunities, competition, infrastructure investment and regulatory policies are also studied in the report.
Coronavirus or Covid 19 was discovered in Wuhan ,China in early December 2019 which bring to being reason of thousands of deaths, closure of national as well as international institutions, travel and trade prohibiting untied movement of mankind and thus becoming a fundamental cause of paralysing and shutting down of the economy of various countries . While an unavoidable worldwide downturn that has followed, can be verifiably as an opportunity to mull over and think back that we have to remain open to the notion that progress originates from dire circumstances and from considering a hitch with continuously evolving viewpoints put in a distinct way. The worldwide reach of Coronavirus should now inspire consistent support, co operation, and collaboration between people, and between public as well as private sectors of the economy. Ritika Mathur | Piyush Deora "Covid19: An Economic Expediency" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020, URL: https://www.ijtsrd.com/papers/ijtsrd31274.pdf Paper Url :https://www.ijtsrd.com/economics/market-economy/31274/covid19-an-economic-expediency/ritika-mathur
Flight Global & PwC analysis of top 100 aerospace companies. "Our Top 100 analysis of aerospace companies’ 2013 financial performance puts hard data behind anecdotal evidence that the industry has never had it so good."
Analysis of Covid19 impact on Sectors of Indian Stock MarketAaron Andrade
The outbreak of COVID19 which is said to be a respiratory disease has bought social and economic life to a standstill position with no advance treatment or vaccine available. The project aims to inform about the impact of covid19 on the Indian economy. It aims on providing impact of covid19 on three different sectors i.e Banking, FMCG and Pharmaceutical. I have used secondary data to analyse the influence of covid19 on the change in the stock price of the company. The companies used in the paper are HDFC bank and ICICI bank from the banking sector, Britannia, and Godrej consumer products from the FMCG sector , Dr.Reddys laboratories and Sun Pharma from the Pharmaceutical sector.
KPMG Report 2020- 'A year off script: Time for resilience'Social Samosa
KPMG Report 2020- 'A year off script: Time for resilience', highlights the performance of the M & E industry in India during the ongoing pandemic & its future.
Impact of Covid 19 on selected sectors of Indian stock marketSonaliKhadaria
The research investigates the impact of the lockdown period caused by the COVID-19 to the stock market of India. The study examines the extent of the influence of the lockdown on the Indian stock market and whether the market reaction would be the same in pre- and post-lockdown period caused by COVID-19 and also what are the ways company chosen to fight against it.
The report provides a review and understanding of mergers and acquisitions (MandAs), capital-raising, partnering deals, and agreements entered into by defense companies during 2012.
STRATEGIC SOURCING(MATERIALS MANAGEMENT AND PURCHASING)(OS.docxcpatriciarpatricia
STRATEGIC SOURCING
(MATERIALS MANAGEMENT AND PURCHASING)
(OSCM 3660-001, Spring 2019)
Dynamic Technologies (Due Date 4-18-19 11:59 P.M.)
Case Guideline
Paul Hong, Ph.D., CMA
Information Operations and Technology Management
College of Business and Innovation
University of Toledo
1
Introduction
This case is about strategic integration into the aviation and aerospace global supply chain:
Complexity of Aviation and aerospace industry is greater than that of automotive industry.
Demand shift to Asia Pacific is obvious in the coming years (2010-2029).
The purpose of this case is to expose students to
Issues related to strategic integration of global supply chain
Challenges of establishing domestic market advantage and global competitiveness.
Update: Review 2018 & 2019 Industry Outlook Reports
Students will have opportunities to examine
Key factors in strategic integration of global supply chain
Awareness of an increasing market potential in emerging markets
Implications of US firms for advanced and emerging market strategies
Note: Refer to:
Questions
Concept Questions: Define the following and provide an example.
(1) Strategic Integration; (2) Global Supply Chain; (3) Aviation and Aerospace Industry
General Questions: Answer the following questions based on (1) the case contexts.
1.1. What is the scope of cost management? What are key cost management measures?
1.2. What are the differences between large OEMs and all respondents (e.g., component suppliers)?
2.1. Differences between India and other Asian/European countries
2.2. Explain strengths and growth potential of Indian aviation and aerospace industry.
3.1. How would you assess the stage of Indian aviation and aerospace industry?
3.2. What are strategic priorities of Indian aviation and aerospace industry?
3.3. Explain the reasons why your team consider the above strategic priorities as such?
4.1. What are the advantages and disadvantages of activity details in India?
(Related to growth—its aspiration to Tier 1 suppliers)
4.2. Why? (Rationale for 4.1)
Questions
General Questions: Answer the following questions based on additional reading materials and google search as needed.
5.1. Update: Major trends of Advanced markets in relation to aviation and aerospace industry.
5.2. Update: Major trends of emerging markets (e.g., BRICs and India in particular)
6.1. Strategic roles of global SCM for aerospace and defense industry (aerospace-related)
competitiveness
6.2. Career growth potential in Aviation/Aerospace/Defense industry.
Conclusion
7.1. Team work description (Roles, division of work, References)
7.2. Coordination of Quality Control and Lessons (by individuals)
Case 2 Grading Details
Top 10 Aerospace Companies in the WorldNameHeadquarters Country 2018 RevenueThe Boeing Company USA$93.39bnAirbus SE Netherlands$75.27bnUnited Technologies Corporation (UTC)USA $59.83bn
Lockheed Martin CorporationUSA$49.97bn
General Dynamics Co.
Supply Chain Metrics That Matter: A Focus on Aerospace & Defense Companies 2017Lora Cecere
Executive Overview
A concentrated industry with few players, Aerospace & Defense (A&D) is unique. While demand in the Aerospace industry is relatively stable, the Defense Industry is volatile. Driven by technology innovation, success lies in the integration of R&D processes into the end-to-end supply chain. The A&D supply chain is largely a story of supply chain excellence in procurement and sourcing strategies. With a dependency on scarce materials, and sole-sourcing strategies, the industry fights to survive.
Government spending drives the defense supply chain. Companies in this industry compete for government contracts that range from hundreds of millions to billions of dollars. The magnitude of these contracts defines winners and losers for the industry. Demand is lumpy and volatile. Companies such as Lockheed Martin and Boeing have had a long-lasting relationship with the government re defense spending, but they live contract by contract. In contrast, the commercial aircraft side is much different. It is driven by long-term economic trends
Government ups the ante for the latest and best technology for global defense. As the technology in jets, weapons, and missile-defense systems continues to advance, the supply chain becomes more complex with increasing pressures on driving innovation. To better understand the industry in relation to supply chain management, let’s start by looking at it within the larger context of the A&D value network. Growth is increasing, margins are decreasing, and longer cash-to-cash cycles are increasing working capital. In Table 1, we share the trends and metrics progress on the Supply Chain Metrics That Matter. These charts are set up to take a hard look at value chains. To understand the table, let’s take a look at the data. For the period of 2010-2016 the average growth of the industry was 4%. However, if the year-over-year growth rate of 2016 is compared to 2010, the growth rate is down 19% in a year-by -year comparison. The red arrows represent a negative trend while the green arrow represents a positive trend. Notice within this value chain that most of the arrows are red. While the industry is more dependent on software and computer hardware, there has been little collaboration to drive value between trading partners. Also note that this industry has the longest Cash-to-Cash cycles of any that we have studied, and the impact of lengthening payables in government spending resulted in a 12% increase in Cash-to-Cash with an average days of Cash-to-Cash of 152.
Table 1. Industry Overview of Trends for the Period of 2010-2016
In this report, we take a detailed look at elements of the metrics portfolio, and then wrap up with excerpts from annual reports to enable the reader to understand the “voice” of the industry.
Macroeconomic analysis of Indian Aviation IndustryManas Kasliwal
A detailed analysis of aviation industry and all the macroeconomic factors affecting the sector. Also, covered is the various segments of Indian Aviation
A key constituent of the Indian economy that accounts for about five percent of the GDP, the Indian chemical industry has vital associations with several other industries such as automotives, consumer durables, food processing, iron and steel, textiles, paper, and engineering, among others. It is the eighth largest sector in the world and the third largest in Asia by volumes, after China and Japan. This report encompasses an assessment of the chemicals industry in India, within the context of the global industry, and the opportunities and challenges it presents. The country’s chemical industry was estimated at USD 91 billion in 2011 and we believe that it has the potential to reach USD 134 billion by 2015 growing at a CAGR of 10 percent. The growth is expected to be driven by rising demand in end-use segments and expanding exports fuelled by increasing export competitiveness. The dynamics that propel the industry, namely opportunities, competition, infrastructure investment and regulatory policies are also studied in the report.
Coronavirus or Covid 19 was discovered in Wuhan ,China in early December 2019 which bring to being reason of thousands of deaths, closure of national as well as international institutions, travel and trade prohibiting untied movement of mankind and thus becoming a fundamental cause of paralysing and shutting down of the economy of various countries . While an unavoidable worldwide downturn that has followed, can be verifiably as an opportunity to mull over and think back that we have to remain open to the notion that progress originates from dire circumstances and from considering a hitch with continuously evolving viewpoints put in a distinct way. The worldwide reach of Coronavirus should now inspire consistent support, co operation, and collaboration between people, and between public as well as private sectors of the economy. Ritika Mathur | Piyush Deora "Covid19: An Economic Expediency" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020, URL: https://www.ijtsrd.com/papers/ijtsrd31274.pdf Paper Url :https://www.ijtsrd.com/economics/market-economy/31274/covid19-an-economic-expediency/ritika-mathur
Flight Global & PwC analysis of top 100 aerospace companies. "Our Top 100 analysis of aerospace companies’ 2013 financial performance puts hard data behind anecdotal evidence that the industry has never had it so good."
Analysis of Covid19 impact on Sectors of Indian Stock MarketAaron Andrade
The outbreak of COVID19 which is said to be a respiratory disease has bought social and economic life to a standstill position with no advance treatment or vaccine available. The project aims to inform about the impact of covid19 on the Indian economy. It aims on providing impact of covid19 on three different sectors i.e Banking, FMCG and Pharmaceutical. I have used secondary data to analyse the influence of covid19 on the change in the stock price of the company. The companies used in the paper are HDFC bank and ICICI bank from the banking sector, Britannia, and Godrej consumer products from the FMCG sector , Dr.Reddys laboratories and Sun Pharma from the Pharmaceutical sector.
KPMG Report 2020- 'A year off script: Time for resilience'Social Samosa
KPMG Report 2020- 'A year off script: Time for resilience', highlights the performance of the M & E industry in India during the ongoing pandemic & its future.
Impact of Covid 19 on selected sectors of Indian stock marketSonaliKhadaria
The research investigates the impact of the lockdown period caused by the COVID-19 to the stock market of India. The study examines the extent of the influence of the lockdown on the Indian stock market and whether the market reaction would be the same in pre- and post-lockdown period caused by COVID-19 and also what are the ways company chosen to fight against it.
The report provides a review and understanding of mergers and acquisitions (MandAs), capital-raising, partnering deals, and agreements entered into by defense companies during 2012.
STRATEGIC SOURCING(MATERIALS MANAGEMENT AND PURCHASING)(OS.docxcpatriciarpatricia
STRATEGIC SOURCING
(MATERIALS MANAGEMENT AND PURCHASING)
(OSCM 3660-001, Spring 2019)
Dynamic Technologies (Due Date 4-18-19 11:59 P.M.)
Case Guideline
Paul Hong, Ph.D., CMA
Information Operations and Technology Management
College of Business and Innovation
University of Toledo
1
Introduction
This case is about strategic integration into the aviation and aerospace global supply chain:
Complexity of Aviation and aerospace industry is greater than that of automotive industry.
Demand shift to Asia Pacific is obvious in the coming years (2010-2029).
The purpose of this case is to expose students to
Issues related to strategic integration of global supply chain
Challenges of establishing domestic market advantage and global competitiveness.
Update: Review 2018 & 2019 Industry Outlook Reports
Students will have opportunities to examine
Key factors in strategic integration of global supply chain
Awareness of an increasing market potential in emerging markets
Implications of US firms for advanced and emerging market strategies
Note: Refer to:
Questions
Concept Questions: Define the following and provide an example.
(1) Strategic Integration; (2) Global Supply Chain; (3) Aviation and Aerospace Industry
General Questions: Answer the following questions based on (1) the case contexts.
1.1. What is the scope of cost management? What are key cost management measures?
1.2. What are the differences between large OEMs and all respondents (e.g., component suppliers)?
2.1. Differences between India and other Asian/European countries
2.2. Explain strengths and growth potential of Indian aviation and aerospace industry.
3.1. How would you assess the stage of Indian aviation and aerospace industry?
3.2. What are strategic priorities of Indian aviation and aerospace industry?
3.3. Explain the reasons why your team consider the above strategic priorities as such?
4.1. What are the advantages and disadvantages of activity details in India?
(Related to growth—its aspiration to Tier 1 suppliers)
4.2. Why? (Rationale for 4.1)
Questions
General Questions: Answer the following questions based on additional reading materials and google search as needed.
5.1. Update: Major trends of Advanced markets in relation to aviation and aerospace industry.
5.2. Update: Major trends of emerging markets (e.g., BRICs and India in particular)
6.1. Strategic roles of global SCM for aerospace and defense industry (aerospace-related)
competitiveness
6.2. Career growth potential in Aviation/Aerospace/Defense industry.
Conclusion
7.1. Team work description (Roles, division of work, References)
7.2. Coordination of Quality Control and Lessons (by individuals)
Case 2 Grading Details
Top 10 Aerospace Companies in the WorldNameHeadquarters Country 2018 RevenueThe Boeing Company USA$93.39bnAirbus SE Netherlands$75.27bnUnited Technologies Corporation (UTC)USA $59.83bn
Lockheed Martin CorporationUSA$49.97bn
General Dynamics Co.
Supply Chain Metrics That Matter: A Focus on Aerospace & Defense Companies 2017Lora Cecere
Executive Overview
A concentrated industry with few players, Aerospace & Defense (A&D) is unique. While demand in the Aerospace industry is relatively stable, the Defense Industry is volatile. Driven by technology innovation, success lies in the integration of R&D processes into the end-to-end supply chain. The A&D supply chain is largely a story of supply chain excellence in procurement and sourcing strategies. With a dependency on scarce materials, and sole-sourcing strategies, the industry fights to survive.
Government spending drives the defense supply chain. Companies in this industry compete for government contracts that range from hundreds of millions to billions of dollars. The magnitude of these contracts defines winners and losers for the industry. Demand is lumpy and volatile. Companies such as Lockheed Martin and Boeing have had a long-lasting relationship with the government re defense spending, but they live contract by contract. In contrast, the commercial aircraft side is much different. It is driven by long-term economic trends
Government ups the ante for the latest and best technology for global defense. As the technology in jets, weapons, and missile-defense systems continues to advance, the supply chain becomes more complex with increasing pressures on driving innovation. To better understand the industry in relation to supply chain management, let’s start by looking at it within the larger context of the A&D value network. Growth is increasing, margins are decreasing, and longer cash-to-cash cycles are increasing working capital. In Table 1, we share the trends and metrics progress on the Supply Chain Metrics That Matter. These charts are set up to take a hard look at value chains. To understand the table, let’s take a look at the data. For the period of 2010-2016 the average growth of the industry was 4%. However, if the year-over-year growth rate of 2016 is compared to 2010, the growth rate is down 19% in a year-by -year comparison. The red arrows represent a negative trend while the green arrow represents a positive trend. Notice within this value chain that most of the arrows are red. While the industry is more dependent on software and computer hardware, there has been little collaboration to drive value between trading partners. Also note that this industry has the longest Cash-to-Cash cycles of any that we have studied, and the impact of lengthening payables in government spending resulted in a 12% increase in Cash-to-Cash with an average days of Cash-to-Cash of 152.
Table 1. Industry Overview of Trends for the Period of 2010-2016
In this report, we take a detailed look at elements of the metrics portfolio, and then wrap up with excerpts from annual reports to enable the reader to understand the “voice” of the industry.
Bombardier Aerospace is pleased to present the 2012 edition of its Business Aircraft Market Forecast. The forecast incorporates a 20-year outlook of business jet industry, Bombardier's long-term vision of the business jet market and an in-depth look at the market drivers in the major regios af the world.
This new edition of Beacon consists of Industry analysis of Defence, Brand Analysis of Royal Enfield, Case study of Hippo, Surrogate Advertising as the concept of the month.
The Indian government has taken the opportunity of the COVID-19 pandemic to look at the aerospace and defence sectors comprehensively, and to initiate policy measures that might go a long way in resetting the sector on a more pronounced growth trajectory
The global military rotorcraft market 2013 2023 - Reports CornerReports Corner
Product Synopsis
This report is the result of SDI's extensive market and company research covering the global rotorcraft industry. It provides detailed analysis of both historic and forecast global industry values, factors influencing demand, the challenges faced by industry participants, analysis of the leading companies in the industry, and key news.
https://www.reportscorner.com/reports/27221/The-Global-Military-Rotorcraft-Market--2013-2023/
Top 100 des acteurs du secteur Aéronautique et Défense 2013PwC France
http://pwc.to/1b3lSOP
Découvrez la 16ème édition de notre Top 100 des acteurs du secteur Aéronautique et Défense réalisé en partenariat avec Flight International.
Here table of contents:
1. Introduction: Global Defense
2. Importance of Self Reliance in Defense for India
3. Concept of Make in India
4. Initiatives under Make in India
5. Defense Procurement Policy: Major Change
6. Future Scope of Make in India and Conclusion
Thank You
Reach me at deshadi805@gmail.com
On 4 November 2010, while climbing through 7,000 ft after departing from Changi Airport, Singapore, the Airbus A380 registered VH-OQA, sustained an uncontained engine rotor failure (UERF) of the No. 2 engine, a Rolls-Royce Trent 900. Debris from the UERF impacted the aircraft, resulting in significant structural and systems damage.
Global MRO market study: The civil maintenance, preventive maintenance and alteration (MRO) market contains four distinct segments: heavy airframe, engine, component and line maintenance.
The articles in this Special Report were previously published in Negotiation,
a monthly newsletter for leaders and business professionals in every field.
Negotiation is published by the Program on Negotiation at Harvard Law School, an interdisciplinary consortium that works to connect rigorous research and scholarship on negotiation and dispute resolution with a deep understanding of practice. For more information about the Program on Negotiation, our Executive Training programs, and
the Negotiation newsletter, please visit www.pon.harvard.edu.
All companies conducting business abroad should be concerned about compliance with
the Foreign Corrupt Practices Act (FCPA or the Act). Companies in certain industries
— like the aerospace and defense industry—due to the heavily regulated nature of the
industry and the level of interaction with foreign governments, are even more vulnerable
to FCPA liability than others.
Embraer foresees a 5% year-over-year Revenue Passenger Kilometer (RPK) growth over the next 20 years which will require 32,800 new aircraft deliveries representing a total market value of US$ 3,6 trillion.
In an effort to be more competitive, aerospace companies have to embrace a more integrated
and concurrent approach to their operational processes. The aim is to meet the key
requirements of being more cost effective, lean and agile while delivering consistently high
quality performance in their operational practices
Recruiting in the Digital Age: A Social Media MasterclassLuanWise
In this masterclass, presented at the Global HR Summit on 5th June 2024, Luan Wise explored the essential features of social media platforms that support talent acquisition, including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok.
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
Premium MEAN Stack Development Solutions for Modern BusinessesSynapseIndia
Stay ahead of the curve with our premium MEAN Stack Development Solutions. Our expert developers utilize MongoDB, Express.js, AngularJS, and Node.js to create modern and responsive web applications. Trust us for cutting-edge solutions that drive your business growth and success.
Know more: https://www.synapseindia.com/technology/mean-stack-development-company.html
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
Sustainability has become an increasingly critical topic as the world recognizes the need to protect our planet and its resources for future generations. Sustainability means meeting our current needs without compromising the ability of future generations to meet theirs. It involves long-term planning and consideration of the consequences of our actions. The goal is to create strategies that ensure the long-term viability of People, Planet, and Profit.
Leading companies such as Nike, Toyota, and Siemens are prioritizing sustainable innovation in their business models, setting an example for others to follow. In this Sustainability training presentation, you will learn key concepts, principles, and practices of sustainability applicable across industries. This training aims to create awareness and educate employees, senior executives, consultants, and other key stakeholders, including investors, policymakers, and supply chain partners, on the importance and implementation of sustainability.
LEARNING OBJECTIVES
1. Develop a comprehensive understanding of the fundamental principles and concepts that form the foundation of sustainability within corporate environments.
2. Explore the sustainability implementation model, focusing on effective measures and reporting strategies to track and communicate sustainability efforts.
3. Identify and define best practices and critical success factors essential for achieving sustainability goals within organizations.
CONTENTS
1. Introduction and Key Concepts of Sustainability
2. Principles and Practices of Sustainability
3. Measures and Reporting in Sustainability
4. Sustainability Implementation & Best Practices
To download the complete presentation, visit: https://www.oeconsulting.com.sg/training-presentations
VAT Registration Outlined In UAE: Benefits and Requirementsuae taxgpt
Vat Registration is a legal obligation for businesses meeting the threshold requirement, helping companies avoid fines and ramifications. Contact now!
https://viralsocialtrends.com/vat-registration-outlined-in-uae/
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challengesHolger Mueller
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
In the Adani-Hindenburg case, what is SEBI investigating.pptxAdani case
Adani SEBI investigation revealed that the latter had sought information from five foreign jurisdictions concerning the holdings of the firm’s foreign portfolio investors (FPIs) in relation to the alleged violations of the MPS Regulations. Nevertheless, the economic interest of the twelve FPIs based in tax haven jurisdictions still needs to be determined. The Adani Group firms classed these FPIs as public shareholders. According to Hindenburg, FPIs were used to get around regulatory standards.
Understanding User Needs and Satisfying ThemAggregage
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
Building Your Employer Brand with Social MediaLuanWise
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
1. 2013 Global aerospace and
defense industry outlook
Expect defense to shrink
while commercial aerospace
sets new records
2. 2
Contents
Overview 3
What is the global outlook for defense spending in 2013? 4
Defense budgets in the U.S. are falling — what will be the direct
impact on defense contractors in 2013? 6
Will foreign sales improve the fortunes of the global defense industry? 6
Commercial aircraft production reached record levels — can this continue? 7
Transformation of the air traffic control (ATC) system — is the return on
investment realistic? 8
Will the business jet and general aviation markets finally rebound in 2013? 9
Changes in UK and European Union export control regulations —
how is that impacting the industry? 10
What is expected in the Canadian industry in 2013? 10
What is expected for India in 2013? 11
Is merger and acquisition activity in 2013 expected to increase? 11
What are the preliminary financial performance results for 2012 and
will it get better in 2013? 12
In the context of the expectations for 2013, how is the A&D
industry doing? 13
Contacts 14
Methodology: Nine months in 2012 top 20 global A&D
company performance 15
3. 3
Overview
The global defense segment is expected to see continued
declines in revenue for the third consecutive year, due to
decreased military spending, principally in the United States
(U.S.) and Europe. On the other hand, the commercial
aircraft segment is expected to reach record levels of
revenues in 2013, just coming off its best year ever for
production in 2012. This Deloitte Touche Tohmatsu Limited
(DTTL) Global Manufacturing Industry group 2013 outlook
for the global aerospace and defense (A&D) industry
provides observations about the challenges, issues, and
opportunities in the sector. Figure 1 shows three key
financial performance metrics for the top 20 global A&D
companies in the first nine months of 2012 versus 2011.
Defense and security — Defense revenues were flat
through the first nine months of 2012 at the global
level, but in the U.S., revenues continued to decline at
negative .5 percent year over year. Indeed only 3 out of
the top 13 defense contractors doing business with the
U.S. Department of Defense (DOD) experienced revenue
growth.1
Continued global economic challenges coupled
with revenue gaps and cost pressures in 2013 may result in
additional decreases in revenue, lower returns on invested
capital, as well as margin contraction for many defense
industry companies, creating pressure to consolidate in
order to squeeze out excess defense segment capacity.
In response, the segment is likely to undergo more
streamlining of its cost structure, divestiture of non-core
assets, and additions of gap filling, as well as game
changing acquisitions. Companies have also renewed
1 Deloitte Touche Tohmatsu Limited (DTTL) Global Manufacturing
Industry group analysis from the first nine months of 2012 data for
the U.S. companies and analogous documents for the European
companies, December 2012. Please see Methodology section in the
report for further information on the analysis.
Figure 1: Top 20 global A&D companies’ financial performance in the first nine months of 2012 versus 2011
Company 2012 Revenue year
over year (YoY)
percentage change
2012 Operating
profit YoY
percentage change
Operating margin YoY
basis points (bps) change
2012 versus 2011
Boeing 20.8% 10.2% -75 bps
EADS 14.0% 82.5% 163 bps
Lockheed Martin 2.3% 14.2% 98 bps
General Dynamics -0.4% -4.9% -55 bps
Northrop Grumman -5.8% -6.9% -14 bps
United Technologies* 10.4% -3.3% -177 bps
Raytheon -2.1% 12.8% 164 bps
Finmeccanica -0.6% 203.5% 1004 bps
GE Aviation* 4.2% 1.7% -46 bps
Safran 14.3% NA NA
Thales 8.0% NA NA
L3 Communications -0.3% -5.6% -57 bps
Honeywell Aerospace* 7.0% 15.7% 140 bps
Textron 10.6% 74.7% 265 bps
Bombardier Aerospace* -8.3% -15.7% -46 bps
Huntington Ingalls Industries 0.9% 1900.0% 545 bps
Harris -2.3% -59.8% -944 bps
Exelis -4.5% 8.7% 125 bps
Embraer 13.2% 18.5% 40 bps
Mitsubishi Heavy Industries Aerospace* -5.8% -760.0% -319 bps
Total 6.7% 14.0% 54 bps
*Partial company results based on A&D activities.
Note: The above companies represent the largest A&D companies (based on 2011 annual data) for which quarterly performance financials are
available during the compilation of this study. NA represents data that is not available.
Source: Deloitte Touche Tohmatsu Limited (DTTL) Global Manufacturing Industry group analysis from the first nine months of 2012 data for the
U.S. companies and analogous documents for the European companies, December 2012. Please see Methodology section in the report for further
information on the analysis.
4. 4
foreign military sales efforts into new geographic markets
which face increasing threats to national security. Effective
execution of such strategies will be necessary in order for
defense contractors to mitigate against more aggressive
competition.
Commercial and business aircraft — Growth in
commercial aircraft manufacturer’s revenues is expected to
reach record levels in 2013, based on increased production
rates and the introduction of the next generation aircraft.
It is likely that 2013 may continue the new trend of global
production levels above 1,000 aircraft per year for the
third year in a row (see Figure 4). Backlogs are expected
to continue growing, with airlines continuing to update
their fleets with new fuel-efficient aircraft in order to
stay competitive. Suppliers to aircraft original equipment
manufacturers (OEMs) are likely to be challenged to keep
pace with production requirements and are expected to
invest in skills development, tooling, and manufacturing
capacity. Finally, for the first time in several years, the
industry may experience an uptick in demand, albeit
modest, in the business aircraft segment as well.2
Outlook — The A&D industry is becoming more global
due to heightened competition, growing travel demands,
and increased security requirements in emerging markets.
Globalization provides opportunities for lower cost and
for technologically advanced product introductions.
Increasingly, these products can be designed and
manufactured virtually anywhere, anytime, largely due to
the Internet and advancements in digital product definition,
design, and manufacturing software. Globalization is also
affecting product selections, in that military and commercial
customers alike are requiring that value be “offset” by
placing work in their countries of origin. This tendency is
likely to continue, as traditional countries are pressured
to keep their jobs at home, but is balanced by the need
for companies to grow revenues and continue to reduce
labor costs. The trend in the industry towards globalization
is also marked by new market entrants, particularly in
the commercial aircraft segment, some of which receive
government financial support that may potentially invite
World Trade Organization (WTO) review consideration
in future years. For both the defense and commercial
segments, it is expected that more governmental
scrutiny and compliance requirements will be required on
acquisition practices in the areas of anti-bribery, anti-money
laundering, and ethical business practices in order to
provide a greater level-playing field of competition.
2 Honeywell Aerospace, Global Business Aviation Forecast, 28
October 2012, http://aerospace.honeywell.com/markets/
business-aviation/2012/10-October/global-business-aviation-
forecast.
What is the global outlook for defense spending
in 2013?
Global spending with defense contractors is expected to
decline in 2013 due to the onset of U.S. defense budget
cuts, continuing the pace set in 2011 with a 3.3 percent
decline, followed by a nominal decline so far in 2012.
The declines are mostly made up of defense budget
reductions in the U.S., United Kingdom (UK), and the
rest of Europe, offset with smaller aggregate increases,
principally in China, Russia, India, Saudi Arabia, the United
Arab Emirates (UAE), and Brazil. The decline may be more
pronounced if the U.S. Budget Control Act automatic cuts,
referred to as “sequestration,” also comes into effect.3
In 2011, global defense spending, inclusive of armed
forces personnel, is estimated to be US$1.7 trillion, with
the U.S. maintaining the highest spending level, nearly five
times the defense spending of China, followed by Russia,
UK, and France.4
Figure 2 shows the top defense spenders
globally in 2011. It should be noted that nine countries
spent over US$40 billion for defense in 2011.
The nominal amount spent on defense does not
necessarily equate to the importance, requirements, or
priority of defense in terms of affordability. Countries such
as Saudi Arabia for example spend a significant amount
of their national budget on defense because they have
national wealth created by their oil industry, security
requirements based on their location in the Middle East,
and historical precedent. Israel spends a significant amount
of its national wealth on defense for good reason — their
homeland has experienced major military conflicts six
times since their founding in 1947. China, Russia, India,
Brazil, South Korea, and others are increasing their defense
spending rapidly due to either their wealth creating
affordability and/or national security interests.
Figure 3 illustrates the affordability and importance of
defense by comparing military expenditures with gross
domestic product (GDP) for selected countries in 2011.
The analysis shows that Saudi Arabia spends the highest
percentage of its GDP on military expenditures at 8.4
percent, followed by Israel at 6.8 percent, and then
the U.S., Russia, and South Korea.5
The global average
GDP spent on defense is 2.5 percent — which is a bit
overstated — considering the U.S. raises the average
significantly with a large portion of total expenditures.6
3 CNN Opinion, “Clock ticking to disastrous defense cuts,” 9 August
2012, http://www.cnn.com/2012/08/09/opinion/bennett-
sequestration-defense-cuts/index.html.
4 Stockholm International Peace Research Institute (SIPRI), SIPRI
Military Expenditure Database, accessed on 8 November 2012,
http://www.sipri.org/databases/milex.
5 SIPRI Yearbook 2012, Armaments, Disarmament and International
Security, accessed on 8 November 2012,
http://www.sipri.org/yearbook/2012/files/SIPRIYB12Summary.
pdf.
6 Ibid.
5. 5
Figure 2: Global military expenditures by country in 2011 (US$ millions)
$16,446
$17,871
$24,659
$26,706
$30,799
$34,501
$35,360
$46,745
$48,531
$48,889
$59,327
$62,535
$62,685
$71,853
$142,859
$711,421
$1,727,513
Israel
Turkey
Canada
Australia
South Korea
Italy
Brazil
Germany
Saudi Arabia
India
Japan
France
United Kingdom
Russia
China
United States
World
Source: Stockholm International Peace Research Institute (SIPRI), SIPRI Military Expenditure Database, accessed on 8 November 2012,
http://www.sipri.org/databases/milex.
Figure 3: Global military expenditures by country as percentage of gross domestic product in 2011
1.0%
1.3%
1.4%
1.4%
1.6%
1.9%
2.0%
2.2%
2.3%
2.5%
2.6%
2.6%
2.8%
3.9%
4.7%
6.8%
8.4%
Japan
Germany
Canada
Brazil
Italy
Australia
China
France
Turkey
World
India
United Kingdom
South Korea
Russia
United States
Israel
Saudi Arabia
Source: SIPRI Yearbook 2012, Armaments, Disarmament and International Security, accessed on 8 November 2012,
http://www.sipri.org/yearbook/2012/files/SIPRIYB12Summary.pdf.
6. 6
Defense budgets in the U.S. are falling — what
will be the direct impact on defense contractors in
2013?
United States defense budget reductions of US$487 billion
over 10 years have been agreed to by U.S. administration
and congressional constituents as part of the Budget
Control Act of 2011.7
This equates to an estimated
reduction of US$25 billion of addressable spend for
defense contractors, or an estimated 12 percent of their
2012 estimated revenues.8
As of press time, the automatic
“sequester” budget reduction of an additional US$492
billion over nine years starting in January 2013, had yet
to be resolved.9
If it occurs, taken altogether, that is likely
to imply a reduction in force structure, (e.g., soldiers,
sailors, airmen, etc.), as well as a reduction in investment
accounts (e.g., research and development (R&D), new
program starts, numbers of units ordered, etc.). Assuming
that sequester cuts will be proportional and that the
entire amount is cut, it is estimated that up to another 12
percent of defense and government contractor budgets
are likely to be impacted, all else being equal.
The impact on the industrial base is likely to be significant,
given that essentially one out of four people in the defense
contractor base within the U.S. would be potentially
impacted between both tranches of the Budget Control
Act and the possibility of being downsized out of the
workforce, should the additional US$492 billion cut take
effect.10
This could mean that the U.S. defense industry
may not be able to afford to keep certain technology
capabilities alive in the industrial base. It might also mean
that there may not be enough work to support two or
more companies in certain technologies, thus potentially
reducing competition.
U.S. defense contractors in 2013 are likely to be challenged
to execute programs of record on schedule and on budget.
For those programs experiencing significant delays and
cost over-runs, there is potential for scale-back or even
termination. Nunn-McCurdy breaches will likely be treated
more seriously than in the past, due to the inability to
absorb cost over-runs due to budget limitations.11
7 Aerospace Industries Association, “The Real Defense Budget
Challenges Lie Ahead,” 26 January 2012.
8 Ibid; Deloitte United States (Deloitte Development LLP), The
Aerospace and Defense Industry in the U.S. — A financial
and economic impact study, 7 March 2012; and DTTL Global
Manufacturing Industry group analysis, December 2012.
9 Congressional Budget Office, “Estimated impact of automatic
budget enforcement procedures specified in the Budget Control
Act,” 12 September 2011, http://www.cbo.gov/sites/default/files/
cbofiles/attachments/09-12-BudgetControlAct.pdf.
10 Ibid.
11 U.S. Government Accountability Office, “Trends in Nunn-McCurdy
Breaches and Tools to Manage Weapon Systems Acquisition Costs,”
29 March 2011, http://www.gao.gov/products/GAO-11-499T.
No matter the outcome of the budget sequester action,
there is likely to be continued pressure to reduce defense
expenditures. There is likely to be continued debates on
several important questions and challenges to U.S. defense
and security policy and investment priorities. These possibly
include: how will the U.S. President work with Congress
to meet the security requirements in response to a nuclear
armed Iran, instability in the South China Seas, continued
threats from North Korea, the continued violence in the
Middle East, and increased cyber-attacks.
These matters are expected to be most important in
2013, as it relates to the financial performance of the
defense industry. The formulation of a renewed U.S.
defense strategy, coupled with the resulting war fighter
requirements, and ultimately the defense budget, will likely
provide the guidance necessary for defense contractors
to size their workforce appropriately, to understand what
revenues they can count on, and therefore what their
financial performance will be in 2013 and beyond.
Will foreign sales improve the fortunes of the global
defense industry?
As the largest purchaser of defense equipment and
services, the U.S. defense budget associated with
contractor spend is still the largest in the world, accounting
for approximately 50 percent of global procurement
spending.12
Even though reductions in the U.S. DOD
budget are expected to be in the US$24 billion to US$50
billion per year range, the budget will still be five to six
times the size of its nearest peer country. These budget
reductions are likely to have two main impacts on the
global market.13
First, non-American A&D companies doing
business with the U.S. government will likely still continue
to do business there, albeit at a lower level of participation,
all things being equal. However, a “one size fits all”
generalization would not adequately describe the outlook
for these companies in 2013. In particular, there may be
cutbacks to specific programs that could disproportionately
affect certain European companies due to their program
concentration. Additionally, new program down-selects
may occur in 2013 that could significantly strengthen a
foreign contractor’s U.S. presence if they are successful in
winning new projects.
12 Census Bureau, Aerospace and Defense Industry Association of
Europe, “Key Facts and Figures 2011,” September 2012; and DTTL
Global Manufacturing Industry group analysis, December 2012.
13 Deloitte United States (Deloitte Development LLP), The Aerospace
and Defense Industry in the U.S. — A financial and economic
impact study, 7 March 2012.
7. 7
In response to declining sales to the U.S. government,
A&D companies in the U.S., will likely strengthen their
marketing and competitive positioning in emerging
markets, particularly in India, Brazil, South Korea, Japan,
Saudi Arabia, Taiwan, Singapore and, the UAE. These
countries, with their increasing wealth and growing
security concerns, are expected to increase their purchases
of sophisticated weapons systems, where U.S. companies
have competitive strengths. European A&D companies
also will likely increase and intensify competition for these
foreign military sales opportunities.
However, declining sales in traditional markets, balanced
with the upside of foreign military sales, will likely result in
an overall decline in global defense revenues in 2013.
Commercial aircraft production reached record
levels — can this continue?
The commercial aircraft segment is experiencing a virtually
unprecedented and prolonged up-cycle, as demonstrated
by recent increases in production by both Boeing and
Airbus. This trend is being driven by growth in passenger
travel demand particularly in Asia and the Middle East,
as well as the need for more fuel-efficient aircraft. It
is anticipated that 2013 will likely result in increased
deliveries of the Boeing 787 Dreamliner, and progress of
new aircraft programs underway globally. Market forecasts
of top large commercial aircraft manufacturers describe an
expectation of between 27,350 and 34,000 commercial
aircraft to be produced over the next 20 years.14
The
difficulty in keeping commercial airlines profitable, based
on the volatility and mostly long-term increase in fuel
costs, is generating requirements for more fuel-efficient
aircraft. This is driving demand for derivative aircraft that
are equipped with next generation engine technology. The
sales order success of the Airbus 320NEO and the Boeing
737MAX have demonstrated that industry technology
innovations can create significant product demand.15
Fuel efficient jet-engine propulsion is one of the most
significant technological innovations that have come to
the commercial aviation market in the last few years.16
Because the price of jet fuel continues to impact the ability
for global airlines to make a profit, the introduction of
new jet power plants which lowers fuel consumption is
an industry game changer. With a claimed fuel-efficiency
savings in the range of approximately 15 percent, airlines
14 Boeing, Current Market Outlook 2012–2031, http://www.
boeing.com/commercial/cmo/pdf/Boeing_Current_Market_
Outlook_2012.pdf, copyright 2012, accessed on 13 November
2012; and EADS, Global Market Forecast 2012–2031, September
2012, http://www.airbus.com/company/market/forecast/.
15 Ibid.
16 Aspire Aviation, “The engine battle heats up,” 10 May 2011.
are requesting that commercial aircraft producers develop
products incorporating these advances.17
Thus, in the
last few years, new programs such as the Airbus A320
NEO, the Boeing 737 MAX, the Bombardier C-Series, the
Mitsubishi Regional Jet (MRJ), the AVIC ARJ21, the COMAC
C919, the Irkut MS-21, and more recently the Embraer ERJ
product line, are planning customer deliveries in the next
several years that will incorporate these new power plants.
As of early-December 2012, engine producers have racked
up 7,252 orders and options for new next-generation
regional and single-aisle commercial aircraft power plants,
making them among the best-selling products in aircraft
production history.18
Figure 4 illustrates a 30-year history and forecast for large
commercial aircraft orders and production, including a
consensus estimate for 2013. It should be noted that the
seven-year moving average for production is expected
to exceed 1,000 aircraft by 2013. This is quite an
accomplishment given that only about 23 years ago, the
seven-year moving average for aircraft production was
approximately 500 aircraft per year (see Figure 4).
17 Aviation Week and Space Technology, “Smooth Start For GTF Flight
Tests,” 22 August 2011; and Aviation Week and Space Technology,
“Virgin America Launches CFM Leap On A320NEO,” 15 June 2011.
18 Seeking Alpha, “Narrow-body jet engines to mean wide profits,”
26 September 2012; and CFM, “New C919 orders push total LEAP
orders past 4,300 engines,” 14 November 2012.
8. 8
Figure 4: History and forecast for large commercial aircraft orders and production (1981 to 2013E)
0
500
1,000
1,500
2,000
2,500
3,000
Orders Production Seven-year moving average production
Year
Quantity
Source: The Boeing Company, News release: “Boeing Reports Third-Quarter Results and Raises 2012 Guidance,” accessed on 8 November 2012,
http://www.boeing.com/news/releases/2012/q4/121024a_nr.pdf; EADS, ”Guidance 2012,” 8 November 2012, http://www.eads.com/eads/
int/en/investor-relations/financials-guidance/guidance/guidance_2012.html; RBC Capital Markets, Analyst report from May 2012 and August
2012, accessed on 8 November 2012; Credit Suisse, Analyst report from June 2012 and October 2012, accessed on 8 November 2012; Morgan
Stanley, Analyst report from June 2012 and August 2012, accessed on 8 November 2012; Reuters, “Boeing targets 1,000 civil jet orders in 2012,” 11
June 2012, http://uk.reuters.com/article/2012/06/11/uk-boeing-idUKBRE85A0X520120611; MarketWatch, “Airbus backs 2012 sales view of
600-650 planes,” 10 June 2012, http://www.marketwatch.com/story/airbus-backs-2012-sales-view-of-600-650-planes-2012-06-10; and DA
Davision Company, Analyst report from May 2011, accessed on 8 November 2012.
Transformation of the air traffic control (ATC)
system — is the return on investment realistic?
Air transportation system (ATS) transformation
initiatives globally, including the U.S. Federal Aviation
Administration’s (FAA) NextGen program, and as well as
Europe’s public-private Single European Sky ATM Research
Programme (SESAR), are expected to be implemented by
2025.19
When fully implemented, satellite-based navigation
and the related transformational programs are expected
to save an estimated 3 billion gallons of fuel, 4 million
flight hours in delays, and 29 million metric tons of carbon
emissions globally each year.20
With the expectation of
increased demand for travel in the next 20 years,21
the
new technology associated with satellite positioning,
navigation, and timing systems is expected to increase fuel
savings per flight by orders of magnitude, while reducing
congestion and weather-related delays.
19 Eurocontrol, “10 projects that changed the face of European
aviation,” 8 February 2011.
20 Deloitte United States (Deloitte Development LLP), Transforming the
Global Air Transportation Systems — A Business Case for Program
Acceleration, 10 May 2011.
21 Fox Business, “Airbus lifts demand forecasts on Asian growth,” 19
September 2011.
It is expected that the net benefit of implementing global
transformation initiatives could result in significant financial
value.22
Specifically, the projected net present value of
global transformation programs through to 2035 is
US$897 billion.23
The estimated regional breakdown is
as follows24
:
• U.S. NextGen program, US$281 billion
• Europe’s SESAR program, US$266 billion
• Rest of world, US$350 billion
Globally, the estimated savings accrued by different
beneficiaries include:
• Passengers, 34 percent
• Airlines, 31 percent
• Overall economy, 30 percent
• Air navigation service providers (ANSP)/airports/ATC
organizations, 5 percent of the total benefits
22 Deloitte United States (Deloitte Development LLP), Transforming the
Global Air Transportation Systems — A Business Case for Program
Acceleration, 10 May 2011.
23 Ibid.
24 Ibid.
9. 9
There are many challenges and risks to meeting the
planned implementation date for ATS transformation
initiatives. These include, but are not limited to, funding,
technology risk, regulatory reform, ATC procedures,
technical and certification standards, harmonization,
and workforce transformation. Given the highly complex
technology involved and the requirement for safety
and reliability, successful deployment will likely require
additional effort and possibly a new approach, such as
that being proposed for the U.S. FAA NextGen program
public-private financing initiative.25
There may also be
significant risk that due to U.S. economic fiscal constraints,
implementation of the NextGen program will be delayed,
making 2025 potentially not achievable.
Furthermore, there may be some scaling back of the
capabilities, which would delay the return on investment
for such programs but could also contribute to risks of
global harmonization and interoperability with SESAR.
Given the financial condition of the airline industry, it may
be a challenge to require airlines to pay for the necessary
equipage of new technologies on board the aircraft, if the
timing or amount of return on investment is not assured.
Plans will need to be developed and implemented to
address aviation system delays attributable to the surface
environment. ATS transformation and technology platform
benefits are dependent on the successful resolution of
capacity challenges, including the insufficient number
of runways, gate shortages, and over-scheduling of
flights during peak traffic periods. Avoiding the cost of
system delays, whether these are occasioned by airborne
congestion or ground-based constraints, is a benefit
to be achieved. However, in order to achieve this, the
development and implementation of plans that address
surface-based delays will be critical.
25 Ibid.
Will the business jet and general aviation markets
finally rebound in 2013?
The general aviation segment was expected to rebound
slightly from the devastating impact experienced to orders,
employment, and revenues that began with the economic
crisis in 2008.26
Shipments for all segments of the general
aviation sector experienced continued increases though
the first three quarters of 2012.27
Total shipments grew 4.2
percent, while total billings increased 1.4 percent through
the first three quarters of 2012.28
Figure 5 shows the
changes in shipments for piston, turboprop, and business
jet segments, as well as total billings for the first nine
months of 2012, compared to the same period in 2011.29
Business jet manufacturers are expressing cautious
optimism, albeit tepid, for 2013. With several years of a
deep recession in general aviation sales, particularly for
piston and turboprop aircraft, there is sentiment that the
industry has reached the bottom and a return to growth is
forecast for this segment of the industry. Several reasons
may explain the challenges the general aviation industry
faces in returning to growth. These include the number of
high quality previously-owned general aircraft available in
the market, tighter credit conditions, the smaller number
of younger people obtaining pilots licenses, and finally
the higher cost of fuel. On the bright side, China is in the
process of liberalizing its air space and expects the general
aviation industry to lead business jet aircraft growth in
the country, due to the increasing number of wealthy
individuals and burgeoning middle class. Sales to the
Middle East also are expected to follow the same pattern
and will contribute to the slight increase in orders.30
26 GAMA, “General Aviation Airplane Shipment Report,” 7 November
2011; and Aircraft Owners and Pilots Association, “GAMA: Decline
in aircraft deliveries slows," 7 November 2011.
27 GAMA website, accessed on 8 November 2012, http://www.
gama.aero/media-center/press-releases/content/gama-issues-
third-quarter-shipment-report-shows-signs-steadiness.
28 Ibid.
29 Ibid.
30 Avjet Corporation, “Private Business Jets — A Global Perspective,” 1
December 2011.
Figure 5: First nine months of 2012 shipments of business and general aviation aircraft manufactured worldwide (US$ billions)
2012 2011 Change
Pistons $597 $577 +3.5%
Turboprops $368 $333 +10.5%
Business jets $428 $427 +0.2%
Total shipments 1,393 1,337 +4.2%
Total billings (US$ billions) $12.3 $12.1 +1.4%
Source: General Aviation Manufacturers Association (GAMA), “GAMA Issues Third Quarter Shipment Report, Shows Signs
of Steadiness Across Segments,” 7 November 2012, http://www.gama.aero/media-center/press-releases/content/
gama-issues-third-quarter-shipment-report-shows-signs-steadiness.
10. 10
Changes in UK and European Union export control
regulations — how is that impacting the industry?
Around the world, several important new initiatives
impacting export control regulations are influencing the
global A&D industry. Most notable is the implementation
of the U.S. and UK Defence Trade Cooperation Treaty
(DTCT) which came into effect in April 2012.31
This treaty
allows the export of certain military items and services
between an “Approved Community” (AC) within the U.S.
and UK and without the need for individual export licenses
or approvals to:
• Facilitate trade
• Combine military and counter-terrorism operations
• Promote co-operative security
• Enhance and streamline R&D, production, and
government contract programs and platforms
Companies supporting government programs and
building large platforms can benefit from this treaty to
streamline their supply chain and reduce their export
control administrative burden, provided that certain
conditions are met. This treaty has the potential to
increase business interoperability in an environment
where greater cooperation and subcontracting is
performed through intricate supply chains and through
complex military platforms designed and built through
international cooperation. Similarly, the U.S. and Australia
will be implementing a Defence Trade Cooperation Treaty
(DTCT) with almost identical benefits and requirements.32
Additionally, the UK is taking a proactive approach in
growing its position in the defense segment by drafting
defense trade agreements with Brazil and Turkey and
signing treaties with Japan, France, and Bahrain. This
strategy is elevating the UK as a desirable market to base
operations or distribution sites for global A&D companies.
Within the European Union (EU), most Member States
have implemented the “Transfer Directive” which requires
EU Member States to: establish a three-tier licensing
system; set uniform criteria for transfers of controlled
military items within the EU; and to simplify the process for
intra-community transfers of military items.33
By creating a
mandated, harmonized and simplified licensing program,
31 UK Ministry of Defence, U.S.-UK Defence Trade Co-Operation Treaty,
March 2012, http://www.bis.gov.uk/assets/BISCore/eco/docs/
mod-docs/12-678-us-uk-defence-trade-cooperation-treaty-uk-
mod-procedures.pdf.
32 U.S. Department of State, The U.S.-Australia Defense Trade
Cooperation Treaty, 14 November 2012, http://www.state.gov/r/
pa/prs/ps/2012/11/200520.htm.
33 Official Journal of the European Union, “Directive 2009/43/EC of the
European Parliament and the Council,” 6 May 2009, http://eur-lex.
europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2009:146:0001:0
036:en:PDF.
the EU-wide policy allows the efficient movement of
military-controlled items within the EU, enabling suppliers
and OEMs to transfer military items throughout the EU for
R&D, production, repair, maintenance, and other purposes
with remarkably less administrative burden.
As defense budgets are reduced and supply chains
become more complex, updated regulations in export
controls can significantly improve the speed of exports to
honor contracts and other trade requirements, as well as
open markets to increase trade through less bureaucratic
processes saving time and money.
What is expected in the Canadian industry in 2013?
With revenues of CAD$22.4 billion in 2011, up 6.7
percent from CAD$21 billion in 2010, and with 87,000
people working in the industry, up 7.4 percent from
81,000 in 2010,34
the Canadian A&D industry shows
strong performance leading into 2013. The increasing
demand for civil aircraft, which represents more than 76
percent35
of the Canadian A&D industry, represents the
main driver for growth in the segment in 2013. Given its
relatively low dependence on the defense segment, the
Canadian A&D industry is not impacted as much from the
defense downturn in the U.S. and in Europe. Furthermore,
Canadian defense will likely soon begin to see the benefits
of the National Shipbuilding Procurement Strategy which
awarded contracts to two Canadian shipyards that will
have an estimated aggregate value of CAD$35 billion over
the next 20 years.36
The contract decisions are tied with
the Industrial Regional Benefits (IRB) requirements which
are expected to enable the Government of Canada to
leverage major investments in A&D programs to encourage
long-term industrial development.37
For the civil aircraft segment, the supplier base will likely
continue to experience pressure from the OEMs to provide
more integrated products. This new reality of the supply
chain may also accelerate the consolidation in the supplier
base, which has been anticipated over the last few years.
34 Aerospace Industries Association of Canada (AIAC), The State of
the Canadian Aerospace Industry — Performance 2011, July 2012,
http://aiac.ca/uploadedFiles/Canadas_Aerospace_Industry/
Industry_Statistics/2011%20Statistics%20%20State%20of%20
the%20Canadian%20Aerospace%20Industry.pdf.
35 Ibid.
36 Government of Canada, Canada News Centre, “Results of
the National Shipbuilding Procurement Strategy,” 19 October
2011, http://news.gc.ca/web/article-eng.do?mthd=tp&crtr.
page=1&nid=629989.
37 Ibid.
11. 11
The emergence of new OEMs in China, Japan, and Russia
to the global A&D industry will generate opportunities for
the Canadian supplier base. The Canadian A&D industry
already exports 73 percent of its products (60 percent
in the U.S. and 24 percent in Europe).38
These new
OEMs will provide future opportunities for the Canadian
A&D industry to increase its exports, while requiring the
Canadian supplier base to adapt to changes in the global
supply chain.
What is expected for India in 2013?
Due to the increasing demand in A&D equipment for the
armed forces, India continues to be one of the promising
A&D markets in the world. Milestones in certain deals are
expected to be achieved in 2013, such as submarines,
missiles, and, the Indian Air Force Medium Multi-Role
Combat Aircraft (MMRCA).39
More overseas companies will
be involved in the Indian market and new joint ventures
are likely to be signed between Indian private and overseas
companies.
India offers not only an attractive market, but also gives
cost advantages relating to basic design and engineering
services, components, and assemblies manufacturing.
This advantage could lead to the integration of overseas
suppliers that directly supply equipment to the Indian
government with the local manufacturing sector.
The Indian government will continue to focus on
indigenization with increasing presence of Indian
companies that could expect certain fiscal and economic
benefits from the government. Indian companies will likely
succeed with the help of foreign companies which creates
a benefit for both. Once indigenous manufacturing takes
root, R&D for the indigenous military industry and civil
aircraft is likely to be the other focus area of the Indian
government.
Offset contracts of aggregate value of more than US$4.5
to US$5 billion (INR 25,000 crore) have been signed by
Indian companies with foreign companies since the offset
policy came into effect in 2005.40
Over 80 percent of these
are contributed towards procurement by the Indian Air
38 Ibid.
39 Indian Military News, “India to spend $74.5 billion on weapons
during 2012-13,” 18 August 2012, http://indianmilitarynews.
wordpress.com/2012/08/18/india-to-spend-74-5-billion-on-
weapons-during-2012-13/; and The Hindu, “We have great
potential to export missiles to friendly nations: Saraswat,” 29 April
2012, http://www.thehindu.com/news/states/andhra-pradesh/
article3365043.ece.
40 Business Standard, “Defence offsets cross Rs 25,000 cr bigger
contracts loom,” 14 August 2012, http://www.business-standard.
com/india/news/defence-offsets-cross-rs-25000-cr-bigger-
contracts-loom/483241/; and SP Aviation, Issue 9 of 2012 on
offset at page numbers 7 and 8.
Force and the balance by the Indian Navy. The Indian Army
expects to execute offset contracts in 2013 or in 2014.41
With the new offset guidelines of 2012 and the
assumption of a formal civil offset policy, the total offset
opportunity for the commercial segment is to be valued at
US$10 to 15 billion.42
Foreign direct investment of 26 percent in the defense
sector is expected to remain at the same level in 2013,
although there have been suggestions to increase this to at
least 49 percent, and then ultimately to 74 percent or 100
percent.43
This matter is likely to continue to be debated
in 2013.
Is merger and acquisition activity in 2013 expected
to increase?
Anticipated reductions in defense budgets will drive the
need for a more efficient cost structure in the defense
segment, while capacity demands in commercial aircraft
continue to fuel efforts to increase market penetration
at key customers. As such, it is expected merger and
acquisition (M&A) activity throughout the A&D sector
will likely increase in 2013. This is likely to be driven by
a variety of factors, including the ongoing recalibration
of markets after the recent global economic crisis on
both corporations and private equity firms. Specifically,
investable cash, as well as borrowing capacity will likely
lead many companies to pursue M&A activity as a vehicle
for growth and a means of accessing new markets.
Many A&D companies have used their cash over the last
several years to pay down debt, buy back stock, increase
dividends, and to make elective contributions to pension
plans. At the beginning of 2012, global A&D companies
had an estimated US$47.1 billion in free cash flow, and
some used this asset to participate in the M&A market.44
M&A deal value in the A&D industry in 2012 was
approximately twice the level from the previous year,
driven in large part by the US$16 billion Goodrich
Corporation acquisition by United Technologies
Corporation.45
Additionally, the vast level of capital raised
41 Deloitte India analysis, December 2012.
42 Confederation of Indian Industries, “Aerospace,” accessed on 8
December 2012, http://www.cii.in/Sectors.aspx?enc=prvePUj2bd
MtgTmvPwvisYH+5EnGjyGXO9hLECvTuNtzD8aRMyMwXwI
ukeRiZBns.
43 Discussion paper on foreign direct investment on defense sector
released by The Department of Industrial Policy and Promotion,
Ministry of Commerce in May 2010 for public comments.
44 DTTL Global Manufacturing Industry group, 2011 Global A&D
Industry performance wrap-up, 9 July 2012,http://www.deloitte.
com/view/en_GX/global/industries/manufacturing/9dd2bc0ad0
e58310Vgn VCM2000001b56f00aRCRD.htm.
45 DTTL Global Manufacturing Industry group analysis, December
2012; and data from Capital IQ accessed on 8 November 2012.
12. 12
by private-equity firms in previous years should serve as
a driver to deploying those funds in 2013 and beyond.
Private equity investors are likely to compete for many of
the same assets as strategic buyers and in some cases may
pay higher values. During 2012, multiple deals, large and
small were announced and similar or higher levels of M&A
activity are expected for 2013.
It is expected that activity will remain high within the
commercial aircraft supplier market, given the anticipated
overall increases to production levels and new program
ramp-ups. Buyers will likely continue to use M&A to position
themselves on these growing commercial programs, as well
as increasing scale and integration capabilities to become
more relevant to the customer. Within the defense world,
the challenges of the defense industry decline will likely
lead to reductions in many defense programs as mentioned
above, as the governments look for ways to reduce budget
deficits. This will likely have a negative impact on overall
defense industry attractiveness of certain assets. At the
same time, expect ever increasing budget support for, and
therefore M&A interest, in those areas which support “new
realities” technologies, such as next generation intelligence,
surveillance, reconnaissance, precision strike, cyber-security,
energy security, data fusion, mission software development,
and unmanned and autonomous controlled vehicles. Also
expect there to be a pickup in equipment maintenance,
repair and overhaul activity.
Figure 7: Top 20 A&D companies by commercial aerospace versus defense revenue, operating earnings, and
operating margin (US$ billion)
Commercial aerospace Defense
Nine
months
2012
Nine
months
2011
Change
(2012 versus
2011)
Nine
months
2012
Nine
months
2011
Change
(2012 versus
2011)
Revenue $152.8 $134.6 13.6% $171.6 $171.7 0.0%
Operating earnings $12.6 $10.2 23.5% $16.6 $15.3 8.2%
Operating margin
percentage
8.2% 7.6% 8.8% 9.6% 8.9% 8.2%
Source: DTTL Global Manufacturing Industry group analysis from the first nine months of 2012 data for the U.S. companies and analogous
documents for the European companies, December 2012. Please see Methodology section in the report for further information on the analysis.
What are the preliminary financial performance
results for 2012 and will it get better in 2013?
Through the first three quarters of 2012, the global
defense industry appears to have slowed the pattern
of decline, which started in 2011, with only a negative
.05 percent global decline in defense segment revenues
as development programs have begun low rate initial
production deliveries, and as increased foreign military
sales helped offset lower defense sales volume in the
U.S. and Europe.46
However, on a more positive note, the
overall global sector revenues grew 6.7 percent to US$332
billion, entirely due to continued revenue growth in the
commercial aircraft segment, which grew 13.6 percent,
more than making up for a flat defense segment.47
Figure 6: Average performance of the top 20 global A&D
companies during nine months in 2012 compared to nine
months in 2011 (US$ billion)
Metrics Nine
months
2012
Nine
months
2011
Change
Revenue $332.0 $311.2 6.7%
Operating earnings $28.1 $24.7 14.0%
Operating margin
percentage
8.5% 7.9% 6.8%
Source: DTTL Global Manufacturing Industry group analysis from the
first nine months of 2012 data for the U.S. companies and analogous
documents for the European companies, December 2012. Please
see Methodology section in the report for further information on the
analysis.
46 DTTL Global Manufacturing Industry group analysis from the first
nine months of 2012 data for the U.S. companies and analogous
documents for the European companies, December 2012.
47 Ibid.
13. 13
Commercial versus defense and U.S. versus Europe
financial performance: In reviewing the top 20 global
A&D companies, it was estimated that the commercial
aerospace segment grew revenues 13.6 percent, while the
defense segment revenues were flat (see Figure 7).48
In
addition, it was estimated that the commercial aerospace
segment operating earnings jumped 23.5 percent, while
defense segment operating earnings grew 8.2 percent.49
It is expected that 2013 will mirror the results as of third
quarter in 2012,50
with declining revenues in the defense
segment offset with increased revenues in the commercial
aircraft segment, resulting in overall low growth for the
entire global sector. Suppliers exposed to the commercial
aircraft segment (e.g. complex aero-structures, electronics,
systems, propulsion, and navigation) will likely improve
their financial performance due to higher delivery
volume. Lower tier suppliers supporting major defense
programs will likely see declines in revenues and financial
performance due to reduction in unit deliveries, delay in
project awards, loss of highly competitive down selects,
or program cancellations. As the pace and reality of
lower defense spending takes hold, it may become more
apparent that the global defense industry has excess
capacity, which in turn may create opportunities for
industry consolidation. It is anticipated that much of the
industry consolidation will occur at the supplier level,
although it is expected that unique circumstances may
result in a large OEM merger or combination in Europe
or North America. With high-cash generation for the
last decade, many A&D companies are positioned for
acquisitions with stronger cash positions and a record low
interest rate environment.
48 Ibid.
49 Ibid.
50 Deloitte Development LLC, Mid-year 2012 top 20 global aerospace
and defense company financial performance analysis, 2 October
2012; and DTTL Global Manufacturing Industry group analysis,
December 2012.
In the context of the expectations for 2013, how is
the A&D industry doing?
Although it has only been 109 years since the Wright
Brothers first flight, the industry has contributed
fundamentally to the way consumers live, work, travel,
and communicate with the technologies created,
and continued innovations developed in jet aircraft,
communications satellites, the Internet, and global
positioning systems, for example. Also, the industry is
primarily responsible for the reduction of casualties in
armed conflict due to the technology innovations that
increasingly keep war fighters out of harm’s way with
unmanned aerial vehicles, sophisticated surveillance
sensors, and over the horizon strike capability. This
industry has created the technology innovations that
have contributed to the very fabric of society — from the
ability to communicate globally around the clock from our
personal digital assistants, to safe and efficient air travel, to
securing our borders, and defending our way of life.
If past is a prologue, expect game changing technology
innovations to continue to be created within the global
A&D industry into the future. In the defense segment,
some of the science and technology being developed
include directed energy and high powered microwave
weapons, hyper-sonic missiles, long-range, and high-
altitude unmanned aerial systems, satellite-based high
resolution full motion video cameras, and extraordinary
software that can trace financial transactions of known
terrorists. For commercial applications, interesting
technologies are being experimented with that can harvest
solar power from space-based solar arrays, converted to
microwaves, or high voltage wireless signals, to ground,
air, and sea-based distribution networks. The prospects of
efficient supersonic commercial aircraft that can address
the sonic boom and environmental challenges of the
past are highly anticipated. These kinds of innovative
technologies will change our society in immeasurable
ways. Just like during the first century, the industry has
changed the way humans interact on a global basis. This is
indeed something to look forward to in the near-term, as
well as in the future.
14. 14
Contacts
Tom Captain
Global A&D Sector Leader
Deloitte Touche Tohmatsu Limited (DTTL)
+1 206 716 6452
tcaptain@deloitte.com
Pauline Biddle
Partner
Deloitte UK
+44 118 322 2452
pbiddle@deloitte.co.uk
Gianluca Di Cicco
Partner
Deloitte Italy
+390647805548
gdicicco@deloitte.it
Gilbert Fayol
Partner
Deloitte France
+33 1 55 61 66 97
gfayol@deloitte.fr
Nidhi Goyal
Director
Deloitte India
+91 124 679 2299
nigoyal@deloitte.com
Dan Haynes
Principal
and U.S. Consulting A&D leader
Deloitte Consulting LLP in the U.S.
+1 404 631 2155
dhaynes@deloitte.com
Michael Hessenbruch
Partner
Deloitte Germany
+49 711 16554 7311
mhessenbruch@deloitte.de
John Hung
Partner
Deloitte China
+86 21 61411828
johnhung@deloitte.com.cn
Ellen MacNeil
Partner
Deloitte Tax LLP in the U.S.
+1 202 378 5220
ellenmacneil@deloitte.com
Kevin McFarlane
Managing Director
Deloitte Corporate Finance LLC in the U.S.
+1 213 553 1423
kemcfarlane@deloitte.com
Frank Milano
Partner
Deloitte & Touche LLP in the U.S.
+1 860 725 3239
fmilano@deloitte.com
Koji Miwa
Partner
Deloitte Japan
+81 80 4359 3273
kmiwa@tohmatsu.co.jp
Jose Othon Tavares de Almeida
Partner
Deloitte Brazil
+55 11 51 86 6066
joalmeida@deloitte.com
Martin Vezina
Partner
Deloitte Canada
+1 514 393 7139
mvezina@deloitte.ca
General (USAF retired) Charles Wald
Director and Senior Advisor
Deloitte Services LP in the U.S.
+1 571 882 7800
cwald@deloitte.com
15. 15
Methodology: Nine months in 2012 top 20 global
A&D company performance
This analysis is based on key metrics for top 20 global A&D
public companies chosen on the basis of A&D revenue size
(based on 2011 annual data). The report uses the latest
audited and unaudited results through 30 September
2012 for each company. Goodrich and SAIC were not
included in the top 20 as United Technologies completed
the acquisition of Goodrich in July 2012 and SAIC’s fiscal
year ends in January and the third quarter 2012 release
occurred following our 30 September 2012 cut-off date.
By using the data from respective companies’ audited
and unaudited results into the calculation framework,
DTTL’s Global Manufacturing Industry group analyzed the
industry’s performance during the nine months of 2012.
The analysis of U.S. compared to non-U.S. companies uses
the constant conversion approach to eliminate the effect
of any foreign currency fluctuations from year to year.
In the commercial versus defense segment analysis, the
analysis compares and contrasts the performance of the
top 20 global A&D companies on the metrics of revenue,
operating earnings, and operating margins. The aggregate
revenue of the top 20 companies from commercial A&D
is not equal to the total revenue as total revenue includes
a certain portion of non-A&D revenue of companies’ that
are majority A&D. The commercial/defense split of all the
top 20 companies was only available for a select group
of companies on a quarterly basis. Companies disclosing
the commercial/defense split or disclosing its business as
one or the other, are: Boeing, EADS, Raytheon, Thales,
Honeywell Aerospace, Bombardier Aerospace, Textron,
and Huntington Ingalls Industries. For the remaining
companies, the study used the commercial and defense
percentage of revenue published in the company’s 10-K or
annual report. Additionally, only a few companies provided
a breakout of commercial and defense operating earnings
as one or the other (Boeing, EADS, Thales, Bombardier
Aerospace, and Huntington Ingalls Industries); for the
remaining companies, the study used the commercial
and A&D percentage of revenue as a proxy to estimate
the respective operating earnings. A few companies do
not give a detailed break up of their commercial A&D
revenues. The following approach was used for these
companies:
• Harris: Segment revenue is separated into U.S.
government revenues and foreign military sales (FMS).
For lack of information, all U.S. government revenues
are assumed to be defense related. The remaining
sales of the RF Communications and Government
Communications Systems segments are taken as
commercial aerospace revenues, while the remaining
revenues for the Integrated Network Solutions segment
are not considered as commercial aircraft, given its other
end markets (e.g. healthcare, energy).
16. 16
• Northrop Grumman: The company reports its revenue
between the U.S. government and other customers.
Since there is no detailed disaggregation of U.S.
government revenues, the study assumes it as all
defense-related sales.
• Raytheon: Company filings separates U.S. government
revenues (from DOD and from non-DOD customers);
however there is no detailed reporting of international
sales between commercial A&D. This study assumes that
all international sales including FMS are defense related
sales.
• Exelis: For lack of information, the study assumes all
international sales to be defense related.
Further, as Safran and Finmeccanica do not publicly report
the mix of commercial and defense sales, the study has
taken the following approach:
• Safran: Defense News51
states in its annual ranking of
Top 100 defense contractors in 2011 (latest available)
that Safran has 20 percent defense revenues in 2011.
The study assumes the remaining company revenues are
related to commercial aerospace.
• Finmeccanica: Defense News52
states in its annual
ranking of Top 100 defense contractors in 2011 that
Finmeccanica has 60.5 percent defense revenues in
2011. The remaining company revenues are adjusted for
non A&D businesses (e.g., Energy, Transportation, and
other activities) to arrive at commercial aircraft revenues.
A&D revenue
• To calculate A&D revenue for an individual company, it
was necessary to determine the percentage of revenue
associated with A&D activities. In calculating such
percentage, a check was made to see whether the
company explicitly stated an A&D revenue figure in its
nine month 2012 filings. In such a case, the explicitly
stated percentage was directly used. If such percentage
was not explicitly stated, the company’s various business
segments or end markets were analyzed and considered
those which are related to A&D in estimating the A&D
revenue percentage. In the case of United Technologies,
since the A&D revenue percentage is not explicitly stated
by the company in its third quarter 2012 release, the
2011 revenue percentage in the Form 10-K was used to
arrive at its A&D revenues.
51 Defense News, Top 100 for 2011, accessed on 8 November 2012,
http://special.defensenews.com/top-100/charts/rank_2011.php.
52 Ibid.
• Once assigned A&D percentages to all of the companies,
companies were put into two categories: those
companies with less than 60 percent of their respective
revenue from A&D and those companies with equal to
or more than 60 percent of their respective revenue from
A&D. If a company derives less than 60 percent of its
revenue from A&D, only the revenue generated by the
A&D part was taken. However, if the company derives
equal to or more than 60 percent of its revenue from
A&D, total revenue for company was used.
• In determining industry A&D revenue, a summation of
the A&D revenue of all constituent 20 companies was
calculated.
Operating earnings and margin percentage:
• In calculating A&D operating earnings, a two-pronged
approach (same as above) was adopted, which states
that if a company derives less than 60 percent of its
revenue from A&D, only the operating earnings clearly
associated with the A&D part was applied. However, if
the company derives equal to or more than 60 percent
of its revenue from A&D, the total operating earnings for
the company was used.
• Two companies: Thales and Safran do not report
operating earnings on a quarterly basis, so their earnings
could not be included in the study.
• The companies’ A&D operating margins were calculated
by dividing their respective A&D operating earnings by
their respective A&D revenues.
• Operating earnings for the industry is the summation of
operating earnings of all constituent 20 companies.
• Operating margin for the industry was calculated as:
total industry operating earnings as a percentage of total
Industry revenue.