This document provides an overview of broom products offered by Atlas Graham, a Canadian manufacturer of manual cleaning solutions. It includes sections on broom selection processes based on environmental conditions and style of broom. It also describes different types of broom fibres and their uses based on indoor versus outdoor applications and the level of dirt/debris. Specific broom product lines are showcased, including the Flexsweep push broom, AG Professional braced brooms, Firefly safety orange brooms, and various industrial brooms for fine and medium dirt. Replacement parts and accessories are also listed.
1) To clean Sunbrella fabrics, one should first hose them off monthly with clear water. A thorough cleaning is needed every 2-3 years using a mild soap and cold water while still on the awning or in a washing machine.
2) For heavy stains or mildew, a bleach solution can be applied and allowed to soak for 15 minutes before rinsing.
3) After thorough cleaning, 303 High Tech Fabric Guard should be applied in two thin coats to replenish the water-resistant finish. It is important to air dry fabrics and avoid excess heat.
The document provides guidance on selecting the proper spray tip for airless coating equipment. It discusses factors to consider like the material thickness and sprayer's flow rate. The tip's orifice size determines the flow rate and fan width. Worn tips reduce efficiency by wasting more paint and labor. Charts provide recommended tip sizes for common coatings and identify tip numbering codes. Proper tip selection is important for productivity, control, and minimizing overspray.
This document summarizes advances in denim processing and finishing techniques. It discusses the manufacturing process of denim including yarn parameters and dyeing methods like rope and slasher dyeing. New developments in dyeing and finishing machinery are outlined. Common finishing techniques like stone washing, enzyme washing and bleach washing are described. The document also introduces some newer denim finishes like sand blasting, buffing and spraying effects. Finally, some uncommon varieties of denim like printed, crushed and petroleum washed denim are mentioned.
How do you know when to have a Slipcover or have the furniture Re-Upholstered? This power point was used during a workshop in DC for those in the Industry at IWCE.
This document discusses denim washing techniques. It begins with an introduction to denim fabric and its history. It then describes various types of denim and finishes that can be applied, such as stone washing, acid washing, sandblasting, and laser finishing. Specific techniques like stone washing, microsanding, and whiskering are explained in detail. The document provides information on the process, materials used, and effects of different denim washing methods. It concludes with a reference section citing additional sources.
A wrinkle, also known as a rhytide, is a fold, ridge or crease in the cloth or garments. Wrinkle is a particular type of pressure in the finished fabric. It is produced during finishing operations by the thickness of the seam used to join pieces for processing.Resin & its use in Denim garments industry to create unique & vintage looks which add value to denim garments & improves it sale ability in market. In 80’s we have seen Resin being used to give non press , iron free trousers & now we are using in Denims to make wrinkles & creases to look natural vintage which stays after multiple home laundries.
The document discusses denim garment manufacturing and washing processes. It provides background on denim fabric, outlines the typical process for manufacturing a denim shirt, and reviews different washing techniques including bleach wash, enzyme wash, and stone enzyme wash. Bleach wash uses chemicals like sodium hypochlorite to lighten denim shades. Enzyme wash is more environmentally friendly and uses enzymes to break down surface fibers for a soft feel. Stone enzyme wash combines enzymes and stones to abrade fabrics for a worn look. The effects of each wash on fabric properties are examined.
Dry finishes.......traditional to latest laser technique for denims..Gaurav Thakur
This document discusses various techniques for finishing denim jeans, ranging from basic to advanced technologies. At the basic level, techniques like hand scraping and creating whiskers are used to distress the jeans. Intermediate technologies include sandblasting, which provides a uniform worn effect. Advanced techniques involve laser technology, which allows for computer-controlled fading and pattern creation in a water-free process. Laser finishing is presented as a safer, greener alternative to traditional abrasive methods and allows for infinite design flexibility.
1) To clean Sunbrella fabrics, one should first hose them off monthly with clear water. A thorough cleaning is needed every 2-3 years using a mild soap and cold water while still on the awning or in a washing machine.
2) For heavy stains or mildew, a bleach solution can be applied and allowed to soak for 15 minutes before rinsing.
3) After thorough cleaning, 303 High Tech Fabric Guard should be applied in two thin coats to replenish the water-resistant finish. It is important to air dry fabrics and avoid excess heat.
The document provides guidance on selecting the proper spray tip for airless coating equipment. It discusses factors to consider like the material thickness and sprayer's flow rate. The tip's orifice size determines the flow rate and fan width. Worn tips reduce efficiency by wasting more paint and labor. Charts provide recommended tip sizes for common coatings and identify tip numbering codes. Proper tip selection is important for productivity, control, and minimizing overspray.
This document summarizes advances in denim processing and finishing techniques. It discusses the manufacturing process of denim including yarn parameters and dyeing methods like rope and slasher dyeing. New developments in dyeing and finishing machinery are outlined. Common finishing techniques like stone washing, enzyme washing and bleach washing are described. The document also introduces some newer denim finishes like sand blasting, buffing and spraying effects. Finally, some uncommon varieties of denim like printed, crushed and petroleum washed denim are mentioned.
How do you know when to have a Slipcover or have the furniture Re-Upholstered? This power point was used during a workshop in DC for those in the Industry at IWCE.
This document discusses denim washing techniques. It begins with an introduction to denim fabric and its history. It then describes various types of denim and finishes that can be applied, such as stone washing, acid washing, sandblasting, and laser finishing. Specific techniques like stone washing, microsanding, and whiskering are explained in detail. The document provides information on the process, materials used, and effects of different denim washing methods. It concludes with a reference section citing additional sources.
A wrinkle, also known as a rhytide, is a fold, ridge or crease in the cloth or garments. Wrinkle is a particular type of pressure in the finished fabric. It is produced during finishing operations by the thickness of the seam used to join pieces for processing.Resin & its use in Denim garments industry to create unique & vintage looks which add value to denim garments & improves it sale ability in market. In 80’s we have seen Resin being used to give non press , iron free trousers & now we are using in Denims to make wrinkles & creases to look natural vintage which stays after multiple home laundries.
The document discusses denim garment manufacturing and washing processes. It provides background on denim fabric, outlines the typical process for manufacturing a denim shirt, and reviews different washing techniques including bleach wash, enzyme wash, and stone enzyme wash. Bleach wash uses chemicals like sodium hypochlorite to lighten denim shades. Enzyme wash is more environmentally friendly and uses enzymes to break down surface fibers for a soft feel. Stone enzyme wash combines enzymes and stones to abrade fabrics for a worn look. The effects of each wash on fabric properties are examined.
Dry finishes.......traditional to latest laser technique for denims..Gaurav Thakur
This document discusses various techniques for finishing denim jeans, ranging from basic to advanced technologies. At the basic level, techniques like hand scraping and creating whiskers are used to distress the jeans. Intermediate technologies include sandblasting, which provides a uniform worn effect. Advanced techniques involve laser technology, which allows for computer-controlled fading and pattern creation in a water-free process. Laser finishing is presented as a safer, greener alternative to traditional abrasive methods and allows for infinite design flexibility.
Ha-Meem Denim Ltd is a large denim manufacturer located in Bangladesh. It procures yarn from various local and international suppliers, warps the yarn, dyes it using slasher and rope dyeing machines, weaves the yarn into fabric, and finishes the fabric through various chemical processes. The company aims for high production while maintaining quality at low cost. It has skilled production teams and works to continuously improve its denim manufacturing process.
Blue Magic is introducing several new products and packaging updates. These include a Headlight Lens Sealer to protect restored and new lenses from yellowing, additions to the Pure Citrus line including holiday scents, and an Interior Detailer. Packaging has been updated for several existing products and Blue Magic guarantees customer satisfaction.
This document discusses various mechanical finishing processes used for wool and wool-blend fabrics. It outlines the key steps for all-wool, poly-wool, and poly-viscose blended materials. The main processes discussed include heat setting, singeing, scouring, hydro extraction, padding, cropping, decatizing, pressing, and super finishing. Process parameters like temperature, speed, and time are provided for many of the steps.
This document provides an overview of the manufacturing process and chemicals used in the denim industry. It discusses the evolution of denim fabric and defines key terms. The manufacturing process involves several steps: warping, indigo dyeing via chemical reduction and oxidation methods, sizing, weaving, and finishing. Various chemicals are used at different stages, including pre-treatment chemicals, dyeing chemicals, sizing agents, printing/coating chemicals, and finishing chemicals. Hazards associated with different chemicals are also reviewed. Process control is important for indigo dyeing quality. The document is a comprehensive reference on denim production and the involved chemicals.
Nowadays, fashion in clothing is unimaginable without denim garment with a numerous effect. Various types of dry and wet process are used to make these effect. In this article, 3D/crinkle effect by creating wrinkles on the denim garments preceded by resin application is discussed. This effect gives vintage look as well as add value to the garments though having possibility of decreasing tearing strength.
This document discusses recent developments in denim manufacturing and processing. It describes how denim is made from yarn spinning through weaving, dyeing, and washing. New yarn types include structured, elastic, and fancy yarns. Weaving has advanced with air jet looms and non-conventional constructions. Dyeing uses rope, slasher, and sheet methods. Washing includes mechanical and chemical processes like stone washing and enzyme washing to distress the fabric. The document outlines the various steps in denim manufacturing and finishing to produce modern denim fabrics.
1) Harvesting of rubber, known as tapping, involves making controlled wounds in the bark of rubber trees to extract the latex. Tapping is done by skilled tappers and involves different tapping systems and intensities.
2) The latex extracted during tapping is processed into preserved latex concentrates, dried sheet rubber, or dry crepe rubber. Processing involves centrifuging, coagulation, rolling, and drying of the latex.
3) Rubber yields and quality vary based on factors like clone, age, soil fertility, climate, and tapping skill. Annual yields in South India are around 375kg/ha for seedlings and 900-1000kg/ha for budded plantations.
This product summary provides information about Capri Tropical Odor Neutralizer in 3 sentences:
Capri Tropical Odor Neutralizer is a concentrated product that instantly destroys malodors in kitchens, bathrooms, smoking lounges, and other areas where odors are a nuisance. It can be diluted and mixed with cleaning agents to maximize deodorization, especially in areas like diaper changing stations, public restrooms, and trash bins. The product comes in a clear/yellowish liquid with a citrus scent that is biodegradable and effective at eliminating tough odors for an extended period of time.
The document discusses Gala Professional, a company that provides a complete range of cleaning tools and solutions for various industries and customers. It highlights their tools for wet and dry mopping, squeegees, mop buckets, brooms, kitchen scrubbers and more. Gala Professional aims to make cleaning easy, fulfill all cleaning needs from a single source, and ensure quality tools for effective and economical cleaning. They serve customers in healthcare, commercial spaces, hospitality, and businesses.
Milling is a process that felts wool fabrics to make them thicker, fuller, and more uniform. It involves treating wool fabrics with moisture, heat, and pressure in a milling machine. There are several types of milling depending on the chemicals used, such as alkaline milling using sodium carbonate, soap milling using soap solutions, and acid milling using diluted sulfuric acid. The objective is to felt the wool fibers together to condense and shrink the fabric while also making the weave less visible. Milling improves the strength, handle, and appearance of the wool fabric.
1) The document provides instructions for applying Sinclair Coating to surfaces. It describes cleaning and preparing the surface, stirring the coating, and taping frames before application.
2) There are multiple application methods described including using a roller, spray gun, pressure pot, or airless system. Proper nozzle sizes and pressures are specified.
3) Two coats may be needed, waiting for the first to dry before the second. Coverage of 4 square meters per liter is estimated. Drying takes 45-60 minutes typically.
This document provides information on Ermine Wood Coatings produced by Sansui Paints. It begins with an overview of the company's standard industrial wood finish product range and notes customized options are available. Later, it focuses on Ermine, a natural finish coating that enhances wood grain while protecting from heat, water and climate. Ermine Liau is introduced as a water-borne coating for exterior wood furniture that is environmentally-friendly and offers advantages over solvent-borne products like fungicides and ease of use. The document concludes by listing Sansui Paints' wood coating product lines including waterborne lacquers, polyurethane coatings, and stains.
Sansui Paints is a leading Indian company that produces specialty and niche coatings. Founded in 1996, it now has a modern manufacturing facility and supplies products across India. The company focuses on customization and meeting customer needs. It also prioritizes environmental protection and social responsibility. Sansui introduces Sinclair, a new peelable polymer coating that provides temporary protection on non-porous surfaces from dust, dirt, and other damage during construction or shipping. Applied by roller or spray, Sinclair forms a thin, removable film and is a cost-effective alternative to cleaning or repairs.
Fabric finishing involves any operations after weaving or knitting to improve a fabric's appearance and usefulness. There are two main categories of finishes: chemical and mechanical. Chemical finishes include resin finishes for wrinkle resistance, softeners, soil release finishes, and flame retardants. Mechanical finishes include heatsetting, raising the fabric surface, shearing, calendering, and sanforizing. The document provides details on the types and purposes of various chemical and mechanical fabric finishing processes.
This document discusses two types of resin finishes for fabrics: deposition and cross-linking. Deposition resins coat fabric surfaces without reacting with fibers, while cross-linking resins chemically react with and bond fiber molecules. The preparation and application of urea-formaldehyde resin is described as an example of cross-linking resin finishing, involving padding the fabric with resin solution, drying, curing at high heat to polymerize the resin, washing off excess, and final softening and drying.
This document provides information about Premier Mop and Broom, a manufacturer of cleaning products including wet mops, dust mops, brooms, and related accessories. It summarizes their product lines and features of various wet mop styles including looped-end and cut-end mops made from cotton, rayon, synthetic, and blended yarns. The document includes product numbers, sizes, packaging details, and specifications for different wet mop models.
a new style installation manual for those who would like some tips and pointers on Royal Grass artificial grass installation in their garden or other application .
ROYAL GRASS
ENJOY PERFECTION
www.royalgrass.com
Fabric finishes are applied after fabric production to improve appearance, feel, or properties. Aesthetic finishes influence texture, luster, drape, and hand. Calendering uses rollers to impart finishes like glazing, moire, or embossing. Other techniques include brushing, shearing, and flocking to modify texture. Functional finishes provide benefits like wrinkle resistance or stain release. A fabric's fiber content and construction determine suitable finishing methods.
This document provides information about Atlas Graham, a manufacturer of manual cleaning tools. It discusses the company's history of over 70 years in business, pioneering new products for the cleaning industry. The document lists and describes Atlas Graham's various product lines, including push brooms, handles, upright brooms, dust pans, wet mops, and other cleaning tools. It provides details on materials, sizes, and other specifications for each product.
Welcome to Americo - 2015. Manufacturer of the highest quality non-woven abra...Lana Owens
Americo Manufacturing Company, headquartered in Acworth, Georgia is a leading manufacturer of sustainable products such as synthetic and natural fiber floor pads, hand pads,
utility pads and floor matting. 100% of the polyester fiber used in pads produced by Americo comes from recycled material from post industrial and post consumer waste and the only
binders used in their manufacturing process used in their manufacturing process are water based. Americo’s products are currently sold worldwide as the company enters into their 45th year of operation. For more information on Americo, visit
www.americomfg.com. For additional information regarding Americo's PromoMatting Division, visit www.promomatting.com.
.
Ha-Meem Denim Ltd is a large denim manufacturer located in Bangladesh. It procures yarn from various local and international suppliers, warps the yarn, dyes it using slasher and rope dyeing machines, weaves the yarn into fabric, and finishes the fabric through various chemical processes. The company aims for high production while maintaining quality at low cost. It has skilled production teams and works to continuously improve its denim manufacturing process.
Blue Magic is introducing several new products and packaging updates. These include a Headlight Lens Sealer to protect restored and new lenses from yellowing, additions to the Pure Citrus line including holiday scents, and an Interior Detailer. Packaging has been updated for several existing products and Blue Magic guarantees customer satisfaction.
This document discusses various mechanical finishing processes used for wool and wool-blend fabrics. It outlines the key steps for all-wool, poly-wool, and poly-viscose blended materials. The main processes discussed include heat setting, singeing, scouring, hydro extraction, padding, cropping, decatizing, pressing, and super finishing. Process parameters like temperature, speed, and time are provided for many of the steps.
This document provides an overview of the manufacturing process and chemicals used in the denim industry. It discusses the evolution of denim fabric and defines key terms. The manufacturing process involves several steps: warping, indigo dyeing via chemical reduction and oxidation methods, sizing, weaving, and finishing. Various chemicals are used at different stages, including pre-treatment chemicals, dyeing chemicals, sizing agents, printing/coating chemicals, and finishing chemicals. Hazards associated with different chemicals are also reviewed. Process control is important for indigo dyeing quality. The document is a comprehensive reference on denim production and the involved chemicals.
Nowadays, fashion in clothing is unimaginable without denim garment with a numerous effect. Various types of dry and wet process are used to make these effect. In this article, 3D/crinkle effect by creating wrinkles on the denim garments preceded by resin application is discussed. This effect gives vintage look as well as add value to the garments though having possibility of decreasing tearing strength.
This document discusses recent developments in denim manufacturing and processing. It describes how denim is made from yarn spinning through weaving, dyeing, and washing. New yarn types include structured, elastic, and fancy yarns. Weaving has advanced with air jet looms and non-conventional constructions. Dyeing uses rope, slasher, and sheet methods. Washing includes mechanical and chemical processes like stone washing and enzyme washing to distress the fabric. The document outlines the various steps in denim manufacturing and finishing to produce modern denim fabrics.
1) Harvesting of rubber, known as tapping, involves making controlled wounds in the bark of rubber trees to extract the latex. Tapping is done by skilled tappers and involves different tapping systems and intensities.
2) The latex extracted during tapping is processed into preserved latex concentrates, dried sheet rubber, or dry crepe rubber. Processing involves centrifuging, coagulation, rolling, and drying of the latex.
3) Rubber yields and quality vary based on factors like clone, age, soil fertility, climate, and tapping skill. Annual yields in South India are around 375kg/ha for seedlings and 900-1000kg/ha for budded plantations.
This product summary provides information about Capri Tropical Odor Neutralizer in 3 sentences:
Capri Tropical Odor Neutralizer is a concentrated product that instantly destroys malodors in kitchens, bathrooms, smoking lounges, and other areas where odors are a nuisance. It can be diluted and mixed with cleaning agents to maximize deodorization, especially in areas like diaper changing stations, public restrooms, and trash bins. The product comes in a clear/yellowish liquid with a citrus scent that is biodegradable and effective at eliminating tough odors for an extended period of time.
The document discusses Gala Professional, a company that provides a complete range of cleaning tools and solutions for various industries and customers. It highlights their tools for wet and dry mopping, squeegees, mop buckets, brooms, kitchen scrubbers and more. Gala Professional aims to make cleaning easy, fulfill all cleaning needs from a single source, and ensure quality tools for effective and economical cleaning. They serve customers in healthcare, commercial spaces, hospitality, and businesses.
Milling is a process that felts wool fabrics to make them thicker, fuller, and more uniform. It involves treating wool fabrics with moisture, heat, and pressure in a milling machine. There are several types of milling depending on the chemicals used, such as alkaline milling using sodium carbonate, soap milling using soap solutions, and acid milling using diluted sulfuric acid. The objective is to felt the wool fibers together to condense and shrink the fabric while also making the weave less visible. Milling improves the strength, handle, and appearance of the wool fabric.
1) The document provides instructions for applying Sinclair Coating to surfaces. It describes cleaning and preparing the surface, stirring the coating, and taping frames before application.
2) There are multiple application methods described including using a roller, spray gun, pressure pot, or airless system. Proper nozzle sizes and pressures are specified.
3) Two coats may be needed, waiting for the first to dry before the second. Coverage of 4 square meters per liter is estimated. Drying takes 45-60 minutes typically.
This document provides information on Ermine Wood Coatings produced by Sansui Paints. It begins with an overview of the company's standard industrial wood finish product range and notes customized options are available. Later, it focuses on Ermine, a natural finish coating that enhances wood grain while protecting from heat, water and climate. Ermine Liau is introduced as a water-borne coating for exterior wood furniture that is environmentally-friendly and offers advantages over solvent-borne products like fungicides and ease of use. The document concludes by listing Sansui Paints' wood coating product lines including waterborne lacquers, polyurethane coatings, and stains.
Sansui Paints is a leading Indian company that produces specialty and niche coatings. Founded in 1996, it now has a modern manufacturing facility and supplies products across India. The company focuses on customization and meeting customer needs. It also prioritizes environmental protection and social responsibility. Sansui introduces Sinclair, a new peelable polymer coating that provides temporary protection on non-porous surfaces from dust, dirt, and other damage during construction or shipping. Applied by roller or spray, Sinclair forms a thin, removable film and is a cost-effective alternative to cleaning or repairs.
Fabric finishing involves any operations after weaving or knitting to improve a fabric's appearance and usefulness. There are two main categories of finishes: chemical and mechanical. Chemical finishes include resin finishes for wrinkle resistance, softeners, soil release finishes, and flame retardants. Mechanical finishes include heatsetting, raising the fabric surface, shearing, calendering, and sanforizing. The document provides details on the types and purposes of various chemical and mechanical fabric finishing processes.
This document discusses two types of resin finishes for fabrics: deposition and cross-linking. Deposition resins coat fabric surfaces without reacting with fibers, while cross-linking resins chemically react with and bond fiber molecules. The preparation and application of urea-formaldehyde resin is described as an example of cross-linking resin finishing, involving padding the fabric with resin solution, drying, curing at high heat to polymerize the resin, washing off excess, and final softening and drying.
This document provides information about Premier Mop and Broom, a manufacturer of cleaning products including wet mops, dust mops, brooms, and related accessories. It summarizes their product lines and features of various wet mop styles including looped-end and cut-end mops made from cotton, rayon, synthetic, and blended yarns. The document includes product numbers, sizes, packaging details, and specifications for different wet mop models.
a new style installation manual for those who would like some tips and pointers on Royal Grass artificial grass installation in their garden or other application .
ROYAL GRASS
ENJOY PERFECTION
www.royalgrass.com
Fabric finishes are applied after fabric production to improve appearance, feel, or properties. Aesthetic finishes influence texture, luster, drape, and hand. Calendering uses rollers to impart finishes like glazing, moire, or embossing. Other techniques include brushing, shearing, and flocking to modify texture. Functional finishes provide benefits like wrinkle resistance or stain release. A fabric's fiber content and construction determine suitable finishing methods.
This document provides information about Atlas Graham, a manufacturer of manual cleaning tools. It discusses the company's history of over 70 years in business, pioneering new products for the cleaning industry. The document lists and describes Atlas Graham's various product lines, including push brooms, handles, upright brooms, dust pans, wet mops, and other cleaning tools. It provides details on materials, sizes, and other specifications for each product.
Welcome to Americo - 2015. Manufacturer of the highest quality non-woven abra...Lana Owens
Americo Manufacturing Company, headquartered in Acworth, Georgia is a leading manufacturer of sustainable products such as synthetic and natural fiber floor pads, hand pads,
utility pads and floor matting. 100% of the polyester fiber used in pads produced by Americo comes from recycled material from post industrial and post consumer waste and the only
binders used in their manufacturing process used in their manufacturing process are water based. Americo’s products are currently sold worldwide as the company enters into their 45th year of operation. For more information on Americo, visit
www.americomfg.com. For additional information regarding Americo's PromoMatting Division, visit www.promomatting.com.
.
How to select the right chairmat from Brooker Business ProductsShelly Carmichael
This document provides information about selecting the appropriate chair mat for different flooring surfaces and carpet thicknesses. It discusses various chair mat features, including studded backs that grip carpet without damaging it, smooth edges for easy chair movement, and checkered backs for optimum carpet grip. It also provides tips for measuring carpet thickness and identifies mats suitable for low, medium, and high pile carpets as well as hard floors. The document emphasizes choosing the right mat to protect flooring and extend carpet life while providing smooth chair mobility.
This document provides an overview and descriptions of various mat products offered by Berachiah Project Services for leisure applications. It describes mats for weight rooms, sport tiles, diamond grid leisure mats, flexi-deck tiles, leisure mats, ringmat honeycomb mats, fatigue-step tiles, first-step tacky mats, clean-step tacky mats, and stablemats for horses. For each product, it provides details on materials, features, sizes and intended uses. Contact information is provided at the end for placing orders or inquiries.
If you have workers making dust or fumes as they move fabrication from station to station, a portable dust collector can provide the needed flexible solution. Small, mobile, portable dust collectors work well with intermittent use in small spaces such as wood shops or tight production facilities.
Opening in blow room means opening into small flocks. Technological operation of opening means the volume of the flock is increased while the number of fibres remains constant
Rayon is a versatile fiber that can be used for apparel, home furnishings, and industrial products. It is soft and comfortable but not good for humid conditions. Rayon is weaker when wet and usually requires dry cleaning. Acetate is used for dresses, drapery, and upholstery fabrics due to its good draping qualities and luster. It must be dry cleaned. Polyester is used widely for apparel, home furnishings, and industrial products like ropes and tires due to its strength, wrinkle resistance, and ability to retain shape. Wool is used for clothing and blankets due to its elasticity, resilience, and ability to regulate temperature but requires careful washing.
Mogul provides nonwoven fabrics and sorbent products for oil, chemical, and hazardous spills. Their product line includes single and multi-layer fabrics, rolls, pads, booms, socks, pillows, drum toppers, spill kits, mats, and wipes. Products are available in different sizes, materials, and adsorption properties for oil-only, universal, or hazardous applications. Mogul aims to be a full-service solution partner for customers' nonwoven and sorbent needs.
This document discusses the end uses and properties of several natural and man-made fibers including rayon, acetate, aramid, polyester, cotton, spandex, wool, silk. Rayon is used in apparel, home furnishings, and industrial products. It has good absorbency and comfort properties. Acetate is used in apparel, home furnishings, and as cigarette filters. It has good draping qualities and luster. Aramid is used in flame-resistant clothing and helmets due to its high strength and heat resistance.
The document discusses various washing techniques used in denim fabric production. It begins with a brief history of denim fabric and jeans. It then covers the different types of washes including chemical washes like bleaching, enzyme washing, and acid washing. It also discusses mechanical washes such as stone washing and microsanding. For each wash technique, it provides details on the process and limitations. The goal of these denim washing techniques is to produce an aesthetic distressed look in a safe and controlled manner.
The document discusses spheronizers and marumerizers which are used to shape extrudates into spherical granules. It describes the extrusion and spheronization process which involves dry mixing, wet massing, extrusion to form rod-shaped particles, and spheronization to round the rods into spheres. Key factors that influence spheronization include the disc speed, charge volume, disc groove geometry, diameter and retention time. Spheronizers have advantages like improved flow properties, uniform packing and coating of particles.
This document provides information about Ecotile Lifestyle floor tiles. It describes Lifestyle as a multi-purpose flooring solution suitable for both indoor and outdoor use. It then discusses the Lifestyle Standard tile, including its benefits, dimensions, materials, installation process, and applications. The document also includes information on accessories available and cleaning instructions.
Berachiah Project Services produces a variety of floor marking, demarcation, and slip-resistant products including line marking paints, floor tapes, grip tapes, aluminum stair treads, and contamination control mats. The document provides details on each product such as descriptions, sizes, colors, and intended uses. It aims to serve customers in the flooring industry and help improve safety. Contact information is provided at the end for those interested in ordering products.
This document provides guidance on maintaining professional hardwood floors. It outlines inspection procedures to identify floor types and existing damage. Floor damage is categorized into 5 levels based on severity. Intensive cleaning and two coating system options are described. Intensive cleaning aggressively scrubs floors with alkaline cleaners to remove built-up dirt. System option 1 combines cleaning with applying a quick coat of renewer to refresh the floor's sheen. System option 2 combines cleaning with applying a durable protective coating to refinish the floor. Detailed instructions are provided for inspection, cleaning and applying coatings.
This document discusses trends in floor coverings over time and the importance of indoor air quality. It provides tips for maintaining different flooring types and improving indoor environments. Specifically, it notes that carpeting was popularized in the 1950s and is still common but hard surfaces are growing in popularity. It also recommends regular vacuuming, cleaning HVAC filters, professional carpet cleaning, and controlling humidity to manage indoor air quality.
2011 Playground Presentation With Buyers Guide 2011 02 01aglgrass1
The document provides information about AGLgrass, an artificial grass company. It discusses the founder Ivan Couto and his experience in the industry. It then summarizes the key specifications of AGLgrass products, including the cryogenic rubber infill, slit film or monofilament grass fibers, and multilayer backing with a closed cell foam pad. The document focuses on playground systems and explains how AGLgrass meets safety, accessibility, and durability standards for playground surfaces.
TYPES OF YARNS & APPLICATION& PROPERTIESTina Dhingra
This document provides information on different types of yarns including their physical properties, advantages, disadvantages, and end applications. It discusses jute, acrylic, nylon, spandex, and cotton. For each yarn type, it outlines properties like tenacity, density, elongation at break, burning characteristics, and more. It also lists common end uses for each yarn such as bags for jute, clothing for acrylic and nylon, hosiery for nylon, exercise clothing for spandex, and more.
Here, we have listed helpful tips on how to deal with a variety of stains and odors. Remember, the only way to guarantee complete stain and odor removal is to call the professionals at Rainbow International.
Royal Grass is an artificial grass product that requires no mowing, watering, or other maintenance, providing homeowners with a beautiful, green lawn that always looks well-kept with minimal effort; it is produced from environmentally-friendly materials and has passed various tests confirming it is safe for the environment and human health; Royal Grass offers homeowners a low-maintenance lawn alternative with a natural appearance and quality guarantee.
1. 1.0 Introduction
Ironclad Warranty
Garantie Inattaquable
Sometimes bad things happen to good products. If this ever happens to you when
experiencing Atlas Graham products, we will make it right again. We guarantee
everything we make. If you are not satisfied with one of our products at the time
you receive it, or if one of our products does not perform to your satisfaction, call
Atlas Graham and we will repair, replace, refund or recommend an alternative.
Damage due to normal wear is not covered under this warranty.
Fax order: 800.665.1257
3. 1.0 Introduction
1.1 BroomS 5
1.2 BruSheS 27
1.3 mopS [DuSt & Wet] 41
1.4 hand duSterS 73
1.5 SqueegeeS [floor & WInDoW] 81
1.6 puraSolutionS™ [mIcrofIbre] 101
1.7 Food hygiene 125
1.8 miScellaneouS toolS 143
1.9 reFerence & index 149
our company
Atlas Graham is a leading Canadian manufacturer of manual cleaning
solutions for institutional, building maintenance and retail markets. We’re
well-respected for providing innovative and environmentally responsible
products as well as exceptional customer service. We’re big enough to
source the finest, most cost-effective materials globally, but small enough
to react locally. In other words, we’re small enough to care and big enough
to deliver. We’d be proud to provide the responsive service you deserve
along with the breakthrough technologies when you require innovation.
Atlas Graham is keeping Canada clean one customer at a time.
.
atlas graham | 3
6. 1.1 Brooms
BROOM SELECTION PROCESS
Getting floors clean
When you start by selecting the right broom for the application, you remove
more dirt from the building with greater ergonomic comfort and safety.
environmental conditions
Broom uses: Note:
■ When moisture is present indoors. ■ For picking up dust and fine dirt on smooth, dry
■ When heavier dirt or debris must be collected indoor floors, use a dust mop – it is more efficient.
indoors that is too heavy for a dust mop. Please refer to the Mop section for proper selection.
■ Outdoor sweeping of all kinds of debris. Brooms ■ 70% to 80% of interior soil is brought into a facility
can be used in landscaping and other speciality from foot traffic. It costs four to five times more to
industries for pushing and clearing surfaces. remove dirt from inside the building than it does to
stop it at the door through mats, dirt traps, and
more frequent sweeping at entrances.
style of broom
Use a push broom for: Use an upright broom for:
■ Larger, unobstructed areas. ■ Smaller areas and corners.
TIP: For maximum efficiency, select a broom that fits ■ Narrow walkways and paths, stairs,
the area. Keep in mind ergonomics: a large, x-coarse entranceways and other narrow spaces.
broom generates more surface drag and is heavier. ■ Use with dust pans.
type of fibre
Use natural fibres when: Use synthetic fibres when:
■ Heat is present. ■ High humidity is present.
■ Biodegradability is a ■ Resistance to chemicals, oils
purchasing decision. and solvents is needed.
NOT recommended for OFFERS the best memory (fibre
oils and solvents. will return to original shape).
6 | atlas graham
7. 1.1 Brooms
FIBRE STRENGTH
Walk softly and carry the right broom
Fibre diameters range from fine (thin) to x-coarse (thick) and are selected according to the type
of surface and the amount of dirt to be collected. Indoor applications require thinner diameter
fibres; outdoor applications require thicker diameter fibres.
indoor indoor/outdoor outdoor extreme outdoor
fine medium coarse x-coarse
fine medium coarse x-coarse
For sweeping dust and dirt on For indoors and outdoors on For heavier outdoor dirt and For outdoors on rough, uneven
smooth indoor surfaces such as rougher surfaces such as terrazzo, debris on uneven surfaces such surfaces with lots of debris.
sealed hardwood, concrete and sealed or unsealed concrete. as asphalt and concrete. These brooms have the most
smooth vinyl. surface drag so they are harder to
Medium fibres are used when a These brooms offer a good push, but they move the biggest
Fine fibres are flagged on the multi-purpose sweeping action is compromise between less surface and largest amount of material
ends to increase softness and required. When used outdoors, drag and the ability to sweep possible. Use these brooms for
dust attraction when the broom the broom works best on even larger sized material. landscaping and road repair.
glides across smooth, hard surfaces with smaller debris.
indoor surfaces.
Note: Brooms denoted as
TIP: Fine brooms work well multi-surface may have a
with sweeping compound for combination of fine, medium
increased dust control. or coarse fibres.
atlas graham | 7
8. 1.1 Brooms
FLEXSWEEP®
The Flexsweep® push broom is the only broom with a connector that flexes slightly
to absorb shearing stresses and eliminate breakage at the point where the handle
meets the head. Made with specially engineered elastomers and polymers, the
connector removes the requirement for heavy steel braces and gives the broom a
lower profile for getting in, around and under equipment.
this broom connector is unbreakable and comes
with a lifetime warranty when used under
normal sweeping conditions.
8 | atlas graham
9. 1.1 Brooms
FLEXSWEEP®
Connector flexes to absorb shocks
The Flexsweep is a low-profile, contractor-quality, indoor/outdoor push broom.
It can get into places that stop a braced broom without sacrificing durability.
why is this the most functional
push broom in canada?
The Flexsweep connector has all the strength of a
braced broom in a "go anywhere" low profile. Flexible
elastomers and strong polymers are engineered to
specific tolerances to achieve a connector that
eliminates broken handles by flexing to absorb
shearing stresses.
■ Kiln-dried hardwood with quality, staple-set fibres
ensures block doesn't warp or shrink. Fibres remain
secure without dropping out.
■ Quality components improve durability and
service life over value-conscious models.
■ 60 in x 11/8 in. inch hardwood handle is the
strongest available.
Sold assembled or unassembled. Packaging options
minimizes shipping and stocking costs.
assembled size [in.] fibre type pack
99960 18 synthetic Fibre end-caps are colour coded
fine 4
99961 24 synthetic to indicate specific uses.
99964 18 medium synthetic 4
99965 24 synthetic
99969 18 coarse synthetic 4
99970 24 synthetic
fine
97324 24 coarse natural 4
2538 60 x 11/8 flexsweep handle & connector 6
unassembled size [in.] fibre type pack
99962 18 synthetic
fine 1
99963 24 synthetic
medium
99966 18 medium synthetic 2
99967 24 synthetic
99971 18 coarse synthetic 1
99972 24 synthetic
B97324 24 coarse natural 1
2538 60 x 11/8 flexsweep handle & connector 6
coarse
Natural fibres have a higher heat tolerance. Synthetic
fibres have better chemical and moisture resistance.
atlas graham | 9
10. 1.1 Brooms
AG PROFESSIONAL™
The strongest braced broom built
These fully assembled, braced push brooms are ready to work in Canada's toughest workplace
environments. The bolt-on handle and brace eliminate broken hardware and worn threads.
Every professional deserves this broom in his or her truck.
Full range of sweeping for
indoor and outdoor performance.
indoor outdoor
fine medium coarse x-coarse
bolt-on reversible handle
Steel brace
TIP: Typically, x-coarse and coarse
brooms are used outdoors. The fine
broom has flagged fibres for dust
control when sweeping indoors.
why is this the toughest broom in canada? item size [in.] fibre packaging pack
The long and short of it is – quality. Every component is made 99941 18
with the highest quality possible for the best performing, 99942 24 fine assembled 4
longest wearing broom Atlas Graham builds. 99943 36
99946 18
■ Handle is 60 x 11/8 inches in diameter with a metal 99947 24 medium assembled 4
brace and bolt-on connector for maximum 99948 36
ergonomic comfort, strength and durability. The 99951 18
handle can be reversed for even wear to extend 99952 24 coarse assembled 4
the life of the fibres. 99953 36
99957 18 x-coarse assembled 4
■ Kiln-dried hardwood with quality staple-set fibres 99958 24
means the block resists warping. Fibres remain
secure within the block.
Fibre end-caps are colour coded
Quality components improve durability and
to indicate specific uses.
■
service life over value-conscious models.
fine medium coarse x-coarse
one tough broom
10 | atlas graham
11. 1.1 Brooms
AG PROFESSIONAL™
Get outdoors and work; this is one tough broom.
Bolt-on handle is reversible to encourage even wear on the
fibres. When properly maintained, this doubles the service life of
a professional broom. The brace provides protection against
shearing stress, so handle breakage and damaged threads will
never wear you down.
atlas graham | 11
12. 1.1 Brooms
FIREFLY™
Safety Orange™ assembled push broom
Use this broom around moving equipment or when high
visibility is an important safety issue for your employees
and work crews.
FIREFLY
The Firefly multi-surface broom can make the Ice, snow, rain or mud: the Sweep-n-
transition from indoors to outdoors with grace, scrape™ broom with a steel blade makes
style, and ease. quick work of any debris, even when the
The safety orange fibre offers high visibility around construction weather isn't on your side.
equipment and forklifts. Road crews demand the assembled bolt-on
style connector and the steel brace for extra protection against shearing This two-in-one tool has all the benefits of a tough
stresses to eliminate handle breakage. x-coarse broom plus the added bonus of a scraper to
remove stubborn debris from driveways. Now you no
■ The broom has two different fibre diameters making it an ideal longer have to use the wood block to remove caked-on
multi-surface broom for general indoor and outdoor sweeping. debris before sweeping. That's what we call brilliant.
Flagged ends control dust indoors or when sweeping a garage.
multi-surface coarse
item size [in.] application pack item size [in.] size pack
77718 18 99824 24 x-coarse 3
multi-surface 4
77724 24
12 | atlas graham
13. 1.1 Brooms
SAFETY ORANGE™
Bolt-on handle system
Configure your broom the way you want it. The block comes with
pre-drilled holes and all the hardware to customize your broom.
replaceable bolt-on handle
heavy-duty (reversible for even wear)
components
replaceable broom head
replaceable steel brace
recessed nut & bolt
for durability
Order a steel brace when a broom is 24 inches
or wider to increase structural integrity and
prevent handle breakage.
Order a broom head, steel brace (2533), and
2533
bolt-on handle (2532) to complete your
unassembled push broom.
item size [in.] component fibre pack
77018 18
77024 24 broom head fine 6
77036 36
77118 18
77124 24 broom head medium 6 2532
77136 36
77218 18
77224 24 broom head coarse 6
77236 36
2533 - steel brace and hardware 20
2532 60 x 1 bolt-on handle 10
atlas graham | 13
14. 1.1 Brooms
FINE INDUSTRIAL
Use on smooth indoor floors
These brooms have fine, soft fibres to trap and lock dust particles
efficiently when sweeping smooth-finish, indoor floors.
550 series | hair fibre Note: blend of horse hair,
These fine fibre push brooms are filled with a blend of synthetic and our softest broom
natural horse hair, a combination that effectively captures and moves
fine dust on smooth indoor surfaces.
item size [in.] pack
55018 18
55024 24 6 fine
55036 36 order acme
handle
531 series | hair fibre blend
A soft sweep broom combining horsehair blend and natural tampico for
sweeping fine particles on smooth surfaces. Tampico fill bends with a
flicking action as the broom sweeps, to help move dust efficiently.
item size [in.] pack
53118 18
53124 24 6 fine
53136 36 order acme
handle
581 series | synthetic Note: oil & solvent resistant
A fine fibre push broom with soft, synthetic fibres. Flagged ends pick up
dust with an almost magnetic action, making this broom a good choice
for hardwood floors. The fill is moisture, solvent and oil resistant with
excellent memory, so bristles will retain their shape over time.
item size [in.] pack
58118 18
58124 24 6 fine
58136 36 order acme
handle
14 | atlas graham
15. 1.1 Brooms
MEDIUM INDUSTRIAL
Use on unfinished floors
These brooms have multiple fibre combinations that offer a greater range
on the fibre barometer when sweeping unfinished floor surfaces.
530 series | tampico & synthetic Note: good sweeping range
Synthetic horsehair encases a medium, natural tampico centre on
these brooms. The soft, synthetic outer bristles pick up fine particles,
while the extra flicking power of the stiffer tampico centre helps move
larger debris for a well-rounded indoor broom.
item size [in.] pack medium
53018 18
53024 24 6
53036 36 order acme
handle
560 series | tampico fibre
A combination of natural and synthetic tampico fibres makes this
broom a good choice for a warehouse or any facility where both fine
dust and larger particles need to be moved.
item size [in.] pack
medium
56018 18
56024 24 6
56036 36 order acme
handle
63 series | synthetic Note: good sweeping range
Our 100%-synthetic fibre, sweep broom is an all-purpose choice for
use indoors on wood, linoleum or concrete floors or outdoors on
smooth surfaces.
item size [in.] pack medium
6318 18
6324 24 6
6336 36 order acme
handle
atlas graham | 15
16. 1.1 Brooms
COARSE INDUSTRIAL
Use on rough, unfinished surfaces
These brooms work on uneven/unfinished floors or uniform outdoor surfaces.
67 series | synthetic combo Note: oil & solvent resistant
The 67 Series features a centre filled with coarse synthetic bristles
encased by a row of soft, flagged, synthetic bristles for a broom that will
sweep up fine dust and move debris at the same time.
coarse
item size [in.] pack
6718 18
6724 24 6
order acme
6736 36 handle
62 series | natural combo Note: heat resistant
An all-natural push broom combining a stiff, palmyra centre
surrounded by an outer row of medium, natural fibre. These two fibres
are plant based, heat resistant, aggressive sweepers that move large
debris over rough surfaces.
coarse
item size [in.] pack
6218 18
6224 24 6 order acme
6236 36 handle
83 series | synthetic Note: oil & solvent resistant
Synthetic fibre fills the block of this outdoor broom. The coarse
bristles are oil and solvent resistant; the broom can be used in wet
or dry conditions wherever heavy debris needs to be moved.
coarse
item size [in.] pack
8318 18
8324 24 6
order acme
8336 36 handle
16 | atlas graham
17. 1.1 Brooms
X-COARSE INDUSTRIAL
These brooms work outside to push heavy debris
Use these brooms streetside on rough uneven surfaces
for jobs such as road construction and landscaping.
73 series | natural Note: order tapered handle
Traditionally called a “stable
broom,” this is an extra-coarse
x-coarse
palmyra-filled broom that is heat
resistant. It is ideal for working
with asphalt in road construc-
tion, or where coarse debris
needs to be swept.
item size [in.] pack
7314 14
10
7316 16
natural fibre is heat resistant
Note: order tapered handle
74 series | synthetic
This broom is filled with coarse,
synthetic fibre and is ideal for
street sweeping and the
construction industry.
Warning: The fibres are chemical x-coarse
resistant, but will warp or melt if
exposed to heat. Use the 73 Series
when high heat is expected.
item size [in.] pack
7414 14
10
7416 16 synthetic fibre is chemical & water resistant
Ensure you order a tapered handle
with these brooms
atlas graham | 17
18. 1.1 Brooms
CORN BROOMS
Going natural never goes out of style
Atlas Graham corn brooms are sized according to the blend of fibres, weight and construction of
materials. The heavier duty, outdoor brooms have more fibre and a thicker, stronger handle.
outdoor outdoor/indoor indoor
x-heavy heavy medium light
material
stitching
band
handle diameter
748 cougar 749 lynx 761 husky 762 wolf
outdoor | x-heavy duty outdoor | heavy-duty
748 cougar specification pack 761 husky specification pack
material corn & cane material corn & cane
rows of stitching 4 12 rows of stitching 3 12
metal band yes metal band yes
handle diameter 11/8-in. lacquered handle diameter 11/8-in. lacquered
uses for this broom industrial: x-heavy-duty, coarser sweep uses for this broom industrial: heavy-duty, coarser sweep
outdoor | x-heavy duty outdoor | heavy-duty
749 lynx specification pack 762 wolf specification pack
material corn material corn
rows of stitching 4 12 rows of stitching 3 12
metal band yes metal band yes
handle diameter 11/8-in. lacquered handle diameter 11/8-in. lacquered
uses for this broom industrial: x-heavy-duty uses for this broom industrial: heavy-duty
18 | atlas graham
19. 1.1 Brooms
CORN BROOMS
On the lighter side
These corn brooms have all the quality you have come to expect from
Atlas Graham. The difference is size; the smaller the animal it's named
after, the lighter and easier the broom is to use.
The 760 Mink is the little specialist with a short 30 x
Atlas Graham corn brooms are sized according to how much 13/16-inch lacquered handle and narrow sweeping
fibre (corn, cane or grass) is in each broom. The heavier duty path. This 100% corn broom is perfect for use with
outdoor brooms have more fibre. our lobby dust pan to remove debris from foyers.
Pack: 12.
763 coyote 764 fox 765 otter & 754 muskrat 760 mink
indoor | medium-duty indoor | light-duty
763 coyote specification pack 765 otter specification pack
material mixed corn material mixed corn
rows of stitching 3 12 rows of stitching 5 12
metal band yes metal band -
handle diameter 11/8-in. lacquered handle diameter 7/8-in.
uses for this broom commercial: medium-duty, stronger uses for this broom office & home: light-duty, stronger
construction construction
indoor/outdoor | medium-duty indoor | light-duty
764 fox specification pack 754 muskrat specification pack
material mixed corn material mixed corn
rows of stitching 6 12 rows of stitching 4 12
metal band - metal band -
handle diameter 15/16-in. handle diameter 7/8-in.
uses for this broom commercial: medium-duty uses for this broom office & home: light-duty
atlas graham | 19
20. 1.1 Brooms
UPRIGHT INDUSTRIAL
Upright brooms
Fused bristles are welded to lock the fibres into the block for less fibre fallout. Use where oil,
solvent or water is present. The non-porous block and fibres can be paired with an aluminum
acme-threaded handle to comply with wood-free regulations.
trailblazer & warehouse order acme
handle
The Trailblazer has flagged ends for trapping dust. The Warehouse is
good for sweeping out corners in an industrial environment.
■ Upright brooms have the perfect profile for sweeping smaller
areas and getting into corners and around equipment.
coarse
■ These brooms offer an alternative to traditional corn brooms
and are better suited for high-humidity environments.
medium
item colour size [in.] fibre pack
771 Warehouse, brown 9½ coarse
10
772 Trailblazer, grey 9½ medium For food service, we recommend an aluminum or fibreglass handle.
For colour-coded brooms, refer to the Food Hygiene section.
dual angle pro
This professional grade dual angle upright has two holes for flexibility. The detachable broom
heads are synthetic and resist moisture and chemicals. Choose the flagged heads (blue) for dust
control. The black heads have a larger diameter fibre (non-flagged) for general sweeping.
Use the centre hole for a vertically straight handle. The offset hole pitches the handle 15°
from centre allowing the user to reach underneath equipment without bending over.
Replacement handle is the 2501.
comes complete with head and 48-inch ECM handle
item colour fibre size [in.] pack
second hole pitches the
handle 15° from centre 78307 blue fine 6
78310 blue fine 9 12
78407 black medium 6
78410 black medium 9
medium
replacement head only
fine
item colour fibre size [in.] pack
78306 blue fine 6
78309 blue fine 9 12
78406 black medium 6
These brooms partner
flagged ends for 78409 black medium 9 well with upright
dust control 2501 48-in ECM handle 24
lobby dust pans.
20 | atlas graham
21. 1.1 Brooms
UPRIGHT COMMERCIAL
An upright for every budget
Upright brooms have the perfect profile for sweeping
smaller areas, getting into corners and moving around
and between equipment.
sweep-ezy™ uprights acme
handle
These sturdy plastic block uprights are filled with soft synthetic fibres
suitable for the smoothest hardwood floors. Traditionally, these brooms
have been called “magnetic,” referring to the static charge they build up
as they work across the surface to remove dust.
head and 48-inch handle replacement head
item size pack item size pack
fine
781 small 10 780 small 24
796 large 12 784 large 12
lightweight upright acme
handle
This lightweight upright has soft synthetic fibres suitable for smooth
floors. It works like a “magnet” towards dust by building up a static
charge as it sweeps.
head and 48-inch handle replacement head
item size [in.] pack item size [in.] pack
795 9 10 794 9 12 fine
rite-angle™ acme
handle
One of our best-selling, economy, synthetic fibre upright brooms. The 790 has
an extra short handle suitable for use with an upright dust pan (10182).
complete head and handle replacement medium
item head handle [in.] pack item size pack
790 small 28 10 791 small 10
792 small 48 10 793 large 24
797 large 48 12 2501 handle, 48-in. 24
atlas graham | 21
22. 1.1 Brooms
ACCESSORIES
These products make sweeping easy
Use the metal dust pan in an industrial environment or where heat is expected.
Use the plastic dust pan in a high-humidity environment.
99980 180 181
The jumbo dust pan is a All of Atlas Graham's dust pans have a
match for push brooms. defined leading edge to ensure debris
goes in the pan, not under it.
sweeping compound | dust control
The perfect mate for cleaning hard floors in warehouses, shops, garages,
basements and construction sites. Non-petroleum-based sweeping
compound picks up surface dirt and dust without leaving an oily
residue. Environmentally safe material includes special detergents for
maximum cleaning power. Safe for all hard floors including concrete,
wood, tile and vinyl. Non-combustible.
Note: compound is not oil absorbent.
item description pack
99980 jumbo aluminum 17-in. dust pan 12
180 steel 12-in. dust pan 12
77115 181 high-impact plastic 12-in. dust pan 12
77115 10-lb. dust control, sweeping compound 1
77150 50-lb. box dust control, sweeping compound (not shown) 1
When dust control is a concern,
use sweeping compound.
22 | atlas graham
23. 1.1 Brooms
ACCESSORIES
Taking out the trash
These tools offer a no-touch strategy for cleaning up debris. The tools also make
the final job of getting the trash into a refuse bin more ergonomically correct.
grip'n grab™
The multi-purpose pickup tool saves your back, and can be used grip'n grab, trigger tool
indoors and outdoors. Comfortable, ergonomically designed handle
item size [in.] pack
and rubberized jaws allow easy retrieval of objects without bending.
37150 36 6
■ Comfortable handle and 36-inch arm with
rubberized jaws reach objects high and low.
Often more convenient and safer than
climbing a ladder.
■ Sleek profile with articulating head that turns
90° to get behind equipment and other tight ■ Head rotates to get
spaces such as stoves. behind tight squeezes.
■ Rust-proof for outdoor use, including ponds
and in all weather conditions.
■ All cleaning carts should have this tool.
Adjust the wing
nut on handle to item description pack
increase the 10182 lobby dust pan 6
opening on the 10281 broom and lobby dust pan 6
bag. 185 Litter-sweep with reusable bag 6
190 Litter-sweep replacement bags 12
185 10182 10281
Industrial Litter-sweep™ also adapts Lobby dust pans have
to standard trash bags. Extra-heavy integrated broom holder. The 760 Mink with a short 30 x 13/16-inch lacquered
weight poly/fabric bags won't rip. handle is the perfect match for the lobby dust pan.
Pack: 12.
atlas graham | 23
24. 1.1 Brooms
HANDLES
Select wood for the natural choice
Each style of broom may require a specific handle in order for it to function well. Select a handle
length that comes to the user's chin. The thicker the handle, the stronger and more comfortable it is.
All threaded handles in this section are standard North American acme thread.
wooden handles
Wood handles offer great value, and they don't conduct electricity or
cold. Many professionals find that wood is the most comfortable and
tactile of all the handle materials. Wood can also be cut for a custom fit.
Note: The Flexsweep [FLEX] and [E] are replacement handles. For a
detailed account of these handles, please see the Professional, Firefly,
Safety Orange™, and Flexsweep™ stories at the beginning of this section.
FLEX
A B C D E
# item size [in.] tip material pack
A 52506 54 x 1 1/8 taper wood 25
52513 60 x 1 1/8 25
2500 48 x 15/16 10
B 52504 54 x 15/16 acme (threaded) wood 25
52509 60 x 15/16 25
52505 54 x 15/16
C 52510 60 x 15/16 acme, metal tip wood 25
52512 60 x 11/8
D 2554 54 x 15/16 acme, nylon tip wood 10
E 2532 60 x 1 bolt-on wood 10
FLEX 2538 60 x 11/8 flexsweep handle/connector 6
L1
W1
ergonomic comfort
L2
The key to proper ergonomic comfort is to match
the handle to the individual. The handle should W2
reach just below the chin [L2] on men and women. L3
W3
L6
W4 L4
broom brace W5
L5
W6
If any broom (excluding the Flexsweep) measures
24 inches wide or greater, Atlas Graham recommends L7
a reinforcing brace: part number 2533.
W7
24 | atlas graham
25. 1.1 Brooms
HANDLES
The right handle is a mix of technology and ergonomics
Metal and fibreglass have properties that can improve
performance when used for the right application.
All threaded handles in this section are standard North American acme thread.
F G H I
steel & epoxy
Our steel metal handles are epoxy coated and are a good, lightweight and economical
alternative to wood. The added benefit is that epoxy coated handles have resistance to
chemicals and are considered non-porous.
aluminum
Aluminum handles offer excellent strength in a lightweight design. In addition, they have
great resistance to chemicals. The fit and finish on aluminum handles give the tool a very
clean appearance and is recommended when using in full view of the public.
fibreglass
Fibreglass handles provide a strong lightweight design in a very durable colour-coded
finish that will not chip or peel. We recommend colour-coding when you want to deploy
cleaning zones. These handles are non-porous and can be used in areas classified as wood
free such as the food service industry. The materials will not rust and the fibreglass does not
conduct electricity or cold. They make an ideal match for cold storage facilities.
# item size [in.] colour tip material pack
F 2501 48 x 7/8 24
black acme metal, epoxy coated
2507 54 x 7/8 10
2307 48 x 15/16
acme,
G 2508 54 x 15/16 black metal, hex: polymer 12
hex collar
2607 60 x 15/16
H 2408 48 x 15/16 silver acme aluminum, nylon 10
2409 60 x 15/16
2411 yellow
24411 red
I 24511 54 x 1 blue acme fibreglass, nylon 10
24611 green
24711 white
2410 yellow
24410 red
I 24510 60 x 1 blue acme fibreglass, nylon 10
24610 green
aluminum
fibreglass
24710 white
steel
atlas graham | 25
27. 1.2
1.2 Brushes
BRUSHES
SECTION TABLE OF CONTENTS
General
Deck 28
Masonry 29
Wire scratch 30
Tile scrubbing† 31
Utility† 32
Hand† 33
Counter† 34
Washroom
Bowl and swabs 35
Water
Vehicle 36
Window 38
Miscellaneous
Handles 39
† See also our extensive selection of brushes
in the 1.7 Food Hygiene section.
atlas graham | 27
28. 1.2 Brushes
DECK BRUSHES
Deck brushes clean a smaller area
Use these brushes to scrub and sweep uneven wood
and grouted surfaces such as decks and patios.
WOOD BLOCK DECK SCRUB
These all-purpose wooden deck brushes are filled
with a blend of natural tampico and palmyra fibres
(called union fibre) in an 11-inch wooden block drilled
to accept a tapered handle.
The 336 brush is edged with a handy rubber
squeegee so that it can be flipped over and used
to move standing water.
The 322 deck brush has synthetic fibres with good
chemical and moisture resistance. This brush has
short, very stiff fibres for aggressive scrubbing.
order tapered
handle
336 334 322
item size [in.] action material pack
336 11 medium union, with rubber squeegee
10
334 union
322 coarse synthetic
SLIM LINE SCRUB BRUSHES
These deck scrubs feature a low-profile plastic block with grooved edges
to provide an easier grip for handheld use. They will also accept any
Acme-threaded handle including our metal, flow-through handles.
Natural tampico fibres absorb more
water and offer a gentle scrubbing
action suitable for pool side cleaning. order acme
handle
item [in.] action material pack
99100 coarse synthetic
10 10
99101 medium tampico
28 | atlas graham
29. 1.2 Brushes
MASONRY | KALSOMINE
Use these brushes for stucco, concrete or applying finishes
Kalsomine (also known as whitewash) brushes can be used to clean up during masonry work, to
give a rustic texture to jointing in brickwork or as applicators for a variety of substances.
masonry kalsomine
250 253 256 257 275
For the application of thick industrial coatings The brushes with handles can be used as appli-
such as stucco, tar or paint. cators to apply wallpaper paste, whitewash,
These brushes are also used to scrub concrete and brick finishes. The
liquid waterproofing of cement. They can also
masonry block brushes need a tapered handle and are used like a deck be used to create a textured finish in wet paint
brush for increased reach.
or cement.
item size [in.] row action material profile trade use pack
250 7x1 6 coarse union masonry scrubber
block brush w/taper hole
253 7 x 1½ 5 medium tampico masonry, tar applicator
256 6x1 3 20
257 7 x 1¾ 3 medium tampico brush with handle kalsomine applicator
275 6x2 5
Tampico fibres are a good choice when you need
absorbency and releasing properties such as
order tapered
handle on 250 & 253 applying industrial coatings.
atlas graham | 29
30. 1.2 Brushes
WIRE SCRATCH
Metal fibres for the coarsest scrubbing
These small brushes are used in a variety of industrial applications
such as welding or removing rust and paint from metal or wood.
WIRE SCRatCH BRUSHES
These brushes are offered in tempered steel for use in dry applications,
stainless steel for more humid conditions and soft brass for cleaning
polished surfaces such as enamel BBQ finishes.
contoured curved handle [99021]
[99019]
item rows handle material pack
99022 4 curved brass
99024 3 long stainless steel 20
99025 4
99015 3 contoured
99016 5 scraper 10
99017 4 long
99018 4 scraper carbon steel 20
99019 4 contoured scraper [99018] block [99020]
99020 6 block
99021 4 curved
99023 3 long
WHISKS
Keep workstations clean and safe
Use to clean work benches. Corn whisks remove dry industrial grit and
the synthetic whisks remove dirt where high humidity is present.
WHISKS
Whisks are useful in many places to sweep dirt from chairs, upholstery,
window sills and small spaces found in vehicle cabs. The all-synthetic
whisk can be used in food service applications.
item material pack
7509 all-synthetic construction
17521 premium corn w/metal cap 12
17522 corn with plastic cap
30 | atlas graham
31. 1.2 Brushes
FLOOR & TILE SCRUBS
When you need to get into corners or grout lines
Nothing works better than these synthetic brushes to remove
dirt, grease, oil and mould from surfaces that are damp or wet.
DUaL LEvEL
This dual-level brush features coarse, crimped
polypropylene trim in a 10-inch polymer block. The
“V” shape of the block means the bristles get into
corners. Use a non-wood handle for food service.
description item pack
dual angle 5317 6
brush
SWIvEL SCRUB
Universal locking collar accepts any handle. Aggressive,
synthetic, short-trim bristles take the hard work out of
scrubbing grime and grease from floors, walls, ledges,
and baseboards. The swivel connector keeps the tool
positioned correctly even on awkward angles.
description item pack
general purpose, coarse 5300
power scrub, x-coarse 5310 5
gROUt & CREvICE
Extra-coarse, ⁷/₈-inch trim fibres offer the strength
required to power through mould and dirt found on
grout. Effective when used with cleaning chemicals.
description item pack
grout and crevice brush, 5351 24
x-coarse
atlas graham | 31
32. 1.2 Brushes
UTILITY SCRUBS
The most versatile brushes you can own
Short or long handle, all-natural or synthetic, these brushes have medium to coarse stiffness
depending upon fibre fill. Natural fibres work well in high heat applications and the all-synthetic
brushes offer good chemical and moisture resistance.
Natural Synthetic
The structure of natural fibre is The structure of synthetic fibres is
open, meaning it absorbs water closed, meaning it absorbs very little
readily and performs well where water. The synthetic polypropylene
heat maybe present. These all- utility brushes are a wood-free sanitary
natural materials are also tool. These brushes can be used in the
biodegradable. food service industry.
handle handle
item action fibre pack item action fibre colour pack
[in.] [in.]
381 20 838 20
medium tampico medium blue
383 9 10 818 9 10
polypropylene
398 20 848 20
coarse union coarse white
400 9 828 9
32 | atlas graham
33. 1.2 Brushes
HAND SCRUBS
These brushes fit your hand like a glove
Pick the best shaped brush for improved ergonomics and efficient scrubbing.
164
POINtED UPHOLStERy
Union fibre in a 9¼-inch peanut The soft tampico 6-inch block
style hand grip is designed for brush is perfect for scrubbing
ergonomic comfort when fabrics such as upholstery, or
aggressive scrubbing is needed. tamping carpets.
description item pack
9¼ in. pointed union fibre 150
6 in. handle, nylon fibre 164 20
150
IRON NaIL
The all-synthetic iron shaped A plastic nail brush with a closed
scrub with the open handle can handle is a must-have for
be used to scrape off dried-on dirt implementing workplace hygiene
while the pointed end gets into programs – gets in between the
hard-to-reach corners for either nail and finger for the cleanest
409 scraping or scrubbing. possible hands.
description item pack
iron hand brush 101 20
nail and finger brush 409 24
101
PaRtS BRUSH
Use the thin profile to clean small
machine parts. All synthetic construction
is solvent and chemical resistant. All tool
boxes deserve this brush.
description item pack
parts brush 8502 20
atlas graham | 33
34. 1.2 Brushes
COUNTER BRUSHES
Sweep from side to side at arm’s length
Counter brushes are handy in many situations; for general use, our wooden counter
brushes clear window sills or workbenches of dust and debris. Synthetic blocks are used
where high humidity is present.
Wood block
In a dry industrial environment, our wooden handle
counter brushes can sweep countertops before dust
has a chance to become grime.
description item pack
blend of horsehair 84 10
synthetic horsehair 85
Synthetic block
In a food preparation environment, our polypropyl-
ene counter brushes can sweep up flour and crumbs
from countertops before washing.
description item pack
white, food service 812 10
blue, food service 814
34 | atlas graham
35. 1.2 Brushes
WASHROOM ACCESSORIES
Scrubbing and cleaning around the toilet bowl
Cleaning toilets may not be the most glamourous job, but having the right tools
means you can get in and get out fast, leaving a clean washroom behind you.
These brushes are best for cleaning urinals or the
underside of the toilet rim where it is difficult to clean.
BOWL BRUSHES
item description pack
25 turks head (urinal) , polypropylene 10
824 twisted-in-wire, polypropylene 20
924 twisted-in-wire, natural tampico 20
1150 hydro plunger 12
25 824 924 1150
These brushes are the best solution for cleaning
toilet bowls without scratching vitreous china.
BOWL ACCESSORIES
Hood slides Designed to
down to help hold swabs.
protect the
user.
823 816 908 906 910
The round toilet brush is our most popular medium/ item description pack
coarse fibre scrub. The acid-resistant swabs are safer to 823 round bowl brush 20
use when chemicals are applied because there is no 816 round bowl brush caddy 10
“flicking” action. Both styles of swabs are designed to 908 acrylan hooded swab 100
release liquid quickly to minimize dripping. 906 acrylan swab 100
910 swab caddy 10
atlas graham | 35
36. 1.2 Brushes
VEHICLE BRUSHES
From muscle cars to off-road trucks
Dedicated wash brushes ensure your vehicle’s dirt and grime are removed while maintaining the
manufacturer’s original shine. So, go ahead, get dirty. Always use these brushes with a commer-
cial grade foaming soap, flow-through nozzle and a pre-rinse for scratch-free performance.
PROfESSIONaL BUMPER
A 10-inch wide oval block with
protective vinyl bumper is filled
with soft, synthetic horsehair fibre.
This brush makes an excellent
foaming brush for use in car
washes.
description item pack
horsehair blend 352 10
PROfESSIONaL OvaL
A nine-inch oval block, filled with
plush nylon fibre that is extremely
gentle on delicate automotive
surfaces. A soft vinyl bumper
around the edge of the block also
helps protect the paint.
description item pack
nylon 355 6
PROfESSIONaL DUaL aNgLE
The 10-inch, dual-level brush with
Nylon bristles make cleaning all
surfaces of a tractor trailer easy –
even the roof.
description item pack
nylon 5314 6
36 | atlas graham
37. 1.2 Brushes
VEHICLE BRUSHES
Getting down to scrubbing transportation vehicles
These brushes are designed to scrub with a commercial-grade, spray-on soap. Industrial vehicles
that use an acid wash should consider our acid-resistant brushes for better durability.
DEtaIL WaSH
These detail brushes have the
softest touch possible. The 20-inch
handle gives extra reach to clean
intricate areas such as grills,
bumpers and wheel wells.
description item pack
20-in. handle, nylon fibre 387
9-in. handle, nylon fibre 386 6
aCID WaSH – DEtaIL
Cement trucks and mining vehicles are the biggest, most difficult
industrial vehicles to clean. AG professional acid brushes are resistant to
caustic or alkaline washes and have a medium bristle for enhanced
scrubbing action without causing damage to painted surfaces. The 20-
inch handle gets into wheel wells and other tight spots.
description item pack
20-in. handle, medium scrub 388 6
aCID WaSH – vEHICLE
The 10-inch brush is perfect for cleaning larger
areas on industrial vehicles and equipment such
as cement chutes. Order handle or flow-through
nozzles separately.
description item pack
10-in. soft/medium brush 315 10
atlas graham | 37
38. 1.2 Brushes
WINDOW BRUSHES
Pre-clean window grime with brushes
Our window brushes have the finest, softest fibres available. The synthetic horsehair brushes
have fine, crimped fibres to hold more water. Tampico offers good heat resistance and absorbs
and releases solution well in an industrial appplication.
5316 305 316
303 318
302
Synthetic brushes clean heavy soil off glass because they, flood the
surface, suspending grit within the surfactants and water, protecting the
window’s surface. Natural tampico holds more water. Use for aggressive
cleaning on dirty windows.
synthetic fibre in. item pack
dual angle, green nylon 10 5316 6
round, green poly 5 303
bumper, green poly 10 318 317
10
rectangular, horsehair blend 10 316
round, horsehair blend 5 305
natural fibre in. item pack
round tampico 5 302
rectangular tampico 10 317 10
Window brushes with a round block can be
drilled in order to accept a flow-through handle.
38 | atlas graham
39. 1.2 Brushes
HANDLES
The right handle extends your reach
Each style of brush requires a specific
handle for it to function well.
WOOD taPERED – WINDOW
# item size [in.] use on... material pack
2514 54 x 15/16
taper: use on
2515 72 x 15/16
A window & vehicle wood 10
2516 96 x 11/8 brushes
2465 60 x 1
WOOD taPERED – DECK & MaSONRy
# item size [in.] use on... material pack
52506 54 x 11/8 taper: use on deck &
B wood 25
52513 60 x 11/8 masonry brushes
WOOD – aCME tHREaD
# item size [in.] tip material pack
52504 54 x 15/16
C acme wood 25
52509 60 x 15/16
aLUMINUM – ExtENSION POLE
# item max [ft.] tip material pack
36708 8
36712 12 3 section, acme
D aluminum 6
36718 18
36724 24 4 section, acme
fLOW-tHROUgH – NOzzLE
# item size [in.] tip material pack
E 353 60 metal, acme steel 12
A B C D E
atlas graham | 39
41. 1.3
1.3 Mops
MOPS
SECTION TABLE OF CONTENTS
Dust & wet mop selection process 42
Dust mops
Product map 45
Signature mops 46
Core mops 50
Value mops 49
Handles & frames 51
Wet mops
Choosing the right wet mop 52
Product map 53
Signature mops 54
Core mops 60
Value mops 62
Mini system 64
Specialty surface 65
Finish applicators 66
Handles 68
Miscellaneous
Sponge mops 70
Floor signs 70
Neutralizer 70
Scrubbers 71
atlas graham | 41
42. 1.3 Mops
DUST MOPPING
Dust mop before wet mopping
Dust mopping removes dust and dirt, reducing the frequency and cost of labour-intensive
procedures such as floor finishing. Indoor air quality also improves because harmful pollut-
ants are removed before they become transported into the building’s HVAC system.
looped-ends tie-ons slip-thru pocket double-boot
Polyester backing provides less than 1% shrinkage when laundered,
providing snug fit for the life of the mop.
size dirt level launderability budget
For smooth floors in open areas or The amount of dust and dirt on Whether or not a dust mop is Always buy the best dust mop the
long corridors, use a 36- to 60-inch the floor is a critical factor in going to be laundered is often an budget can afford. Typically, dust
mop to cover more surface area. determining which type of dust overlooked factor. Synthetic mops last a long time and in the
mop to use. blended yarns offer the best big picture they are not expensive
For smaller areas such as durability and, therefore, the items to own or operate.
classrooms with lots of Treated mops (typically cotton) best launderability.
obstructions, use a smaller, are best for areas with heavy Synthetic blended yarns require a
more manoeuvrable size such amounts of dust such as in an To achieve top laundry higher initial investment, but offer
as an 18- or 24-inch dust mop. industrial or warehouse facility. performance, choose a a lower overall cost of operation
synthetic mop that is made because they are more durable
Static charged dust mops of either heat-set or looped- and can be laundered.
(untreated) are best for facilities end yarn.
where chemical use is discour- Cotton blended yarns provide
aged such as schools or hospitals. lower initial costs, but are not
as durable because they are
semi-disposable and laundering
is not recommended.
70% to 80% of interior soil is brought into a facility from foot traffic. It costs four to five times
more to remove dirt from inside the building than it does to stop it at the door. Frequent dust
mopping is not only faster than wet mopping, it is also a more ergonomic operation to perform.
42 | atlas graham
43. 1.3 Mops
WET MOPPING
Match the mop to the application
Choosing the right wet mop for the job at hand depends on the intended application. A wet
mop is a very versatile tool that can be used in different situations, including spill pick-up,
damp mopping, floor washing and floor finishing.
where wet mops are used headband
■ Choose a mop manufactured ■ For applying floor finishes,
with a highly absorptive, cotton germicides/disinfectants and
blended yarn to quickly absorb waxes, use a synthetic yarn that
spills, reducing the risk of injury. will quickly release liquid onto
Less time mopping also means the floor. Rayon or nylon are
looped-ends
less labour, making the task preferred for finishing/stripping/
more efficient. coating applications. tailband
■ Mops are also used for general ■ A synthetic blended mop is a
damp mopping of floors to better choice for washing a floor
remove dried-on dirt. For these where large amounts of liquid
important tasks, choose a mop are dispersed onto the floor.
with a yarn that balances
absorptive and release ■ For hazardous material spill
features with your budget. cleanup, use a highly absorbent
disposable mop.
surface/area dirt level launderability budget
For smooth floor surfaces, any For large amounts of dirt and Synthetic blended yarns offer the Synthetic yarns are typically less
traditional wet mop will achieve water, a mop yarn with high- best durability and launderability. costly in the long run because
the intended goal. The larger the absorption qualities such as Cotton blended yarns have low they are more durable and
mop, the more surface area is in cotton or rayon-blended yarn is upfront costs, but do not provide launderable than cotton or
contact with the floor, the more the right choice. Cotton and rayon the same level of launderability as rayon-blended yarns.
efficient and less costly the task yarns, are by nature, absorbent synthetic yarns do.
becomes to perform. and pick up large amounts of Cotton and rayon yarns offer a low
liquid quickly. Looped-end mops are also more upfront cost, but do not launder
For nonslip flooring with rough durable and launderable than well and will need to be replaced
surfaces, a non-linting knitted Cotton holds water. their cut-end counterparts. The more often. These mops are
cotton or fleece blended mop is Rayon releases water. looped-ends keep the yarn from considered semi-disposable.
the ideal choice to ensure unravelling and don’t lint-off as
maximum return on your Both yarns are highly absorbent. much in the drying cycle. Always consider the intended
cleaning tool investment. application before price. The
wrong mop regardless of cost will
not perform well. As a result,
labour costs will increase.
Wet mopping plays a big role in lowering building maintenance costs and ensuring a safe
working environment. Match the size of the mop to the worker’s size and the area being cleaned.
atlas graham | 43
44. 1.3 Mops
DUST MOPS
Choosing the right style
A little time spent evaluating the different styles and materials of dust mops will ensure you
get the best performance and value. Other features such as looped-end and double-boot
construction provide extra durability.
Tie-on Slip-on
The break away, universal frame
and handle fit both styles of dust
mops (tie-on or slip-on).
cut-end looped-end double-boot tie-on style
Cut-end mops can be laundered, The Astrolene and the Microloop Extra fabric is added to the wear Tie-ons provide a custom, no-slip
but not as well as the looped-end mops are both available in points of the mop to increase life. fit after each laundry cycle. Note:
style. However, some pros like the looped-end construction for The mop actually has one slip-on
fact the ends fray over time for better durability when laundering. pocket and one tie-on pocket to
added loft. minimize mop installation time.
44 | atlas graham
45. 1.3 Mops
DUST MOP PRODUCT MAP
A mop for every condition, every budget
Atlas Graham offers launderable, semi-disposable and disposable dust
mops to suit every budget and every market.
SIGNATURE MOPS ■ heat-set yarn for the right All our signature dust mops are
combination of strength and designed for facilities where a
launderability high level of cleanliness and
■ double-booted to reinforce launderability is required.
stress points where frame comes Excellent choice for health-care
in contact with mop and commercial facilities.
MICROLOOP™ ASTROLENE™ ■ blended yarn maximizes pickup
■ heat-set yarn for strength and Our core dust mops are designed
CORE MOPS laundry performance for facilities where a high level of
■ reinforced, double-boot stress clean is required with or without
points maximize durability. using dust mop treatment. Use
these mops in educational,
commercial or industrial facilities.
ELECTROSTAT™ COTTON-INDUSTRIAL
■ blended non-heat-set yarns for Our value-conscious dust mops
VALUE-CONSCIOUS MOPS economical use are designed for facilities where
■ single-boot construction for daily or weekly laundering is not
good performance possible. These mops are best for
industrial, food service or
hospitality facilities.
MULTISTAT™ COTTON VALUE
SPECIALTY MOPS Biomop biodegradable, disposable dusting sheets offer a perfect,
single-use, dust mopping solution where maximum cleanliness is
required and when laundering is not practical or possible. These mops
are used in health-care and commercial settings. See the Purasolutions™
section for additional information.
BIOMOP™
atlas graham | 45
46. 1.3 Mops
MICROLOOP™
A new microfibre dust mop
Microfibre synthetic-blended yarn increases the mop’s effectiveness to hold dust
because more fibres come in contact with the floor on a microscopic level. The result
is a deeper clean on smooth floors.
All the benefits of microfibre in a traditional dust mop.
Service life: 75-200 laundry cycles with proper care.
46 | atlas graham