- Remove the spark plug and inspect the electrode for wear or damage, replacing if needed. Check the insulator color.
- Measure the spark plug gap and regap if out of specification using a wire thickness gauge. The standard gap is 0.7-0.8 mm.
- Clean the plug with a spark plug cleaner if necessary. Replace with a standard BR9ES (NGK) plug.
- Tighten the spark plug to 28 N when reinstalling.
1997 1998 1999 Yamaha Venture 500/600 Service Repair Manualqwuikm
This is the Highly Detailed factory service repair manual for the1997 1998 1999 YAMAHA VENTURE 500/600, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.1997 1998 1999 YAMAHA VENTURE 500/600 Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Periodic Inspection and Adjustment
Chassis
Power Train
Engine Overhaul
Cooling System
Carburetion
Electrical
Specifications
Optional Kit
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have1997 1998 1999 YAMAHA VENTURE 500/600 Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
YAMAHA FL225AET OUTBOARD Service Repair Manual X: 000101-jkksejkdm
This is the Highly Detailed factory service repair manual for theYAMAHA FL225AET OUTBOARD, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.YAMAHA FL225AET OUTBOARD Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General information
Specifications
Periodic checks and adjustments
Fuel system
Power unit
Lower unit
Bracket unit
Electrical systems
Troubleshooting
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveYAMAHA FL225AET OUTBOARD Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
1994 1995 1996 Yamaha VMAX 500/600 Service Repair Manualjkmsmd yedkmd
This is the Highly Detailed factory service repair manual for the1994 1995 1996 YAMAHA VMAX 500/600, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.1994 1995 1996 YAMAHA VMAX 500/600 Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Periodic Inspection and Adjustment
Chassis
Power Train
Engine Overhaul
Cooling System
Carburetion
Electrical
Specifications
Optional Kit
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have1994 1995 1996 YAMAHA VMAX 500/600 Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
1993 YAMAHA VENTURE VT480 SNOWMOBILE Service Repair Manualjksmemmd
This is the Highly Detailed factory service repair manual for the1993 YAMAHA VENTURE VT480 SNOWMOBILE , this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.1993 YAMAHA VENTURE VT480 SNOWMOBILE Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Periodic Inspection and Adjustment
Chassis
Power Train
Engine Overhaul
Carburetion
Electrical
Appendices
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have1993 YAMAHA VENTURE VT480 SNOWMOBILE Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
1997-2004 YAMAHA Venture VT700 SNOWMOBILE Service Repair Manualjkmsmd yedkmd
This is the Highly Detailed factory service repair manual for the1997-2004 YAMAHA VENTURE VT700 SNOWMOBILE, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.1997-2004 YAMAHA VENTURE VT700 SNOWMOBILE Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Periodic Inspection and Adjustment
Chassis
Power Train
Engine Overhaul
Cooling System
Carburetion
Electrical
Specifications
Optional Kit
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have1997-2004 YAMAHA VENTURE VT700 SNOWMOBILE Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
This document provides instructions for removing and installing a flywheel housing on a C18 Industrial Engine WJB. It is a 3-page service manual excerpt that describes:
1) Required tools and safety notices
2) Removal procedure which includes supporting the engine, removing bolts and lifting the housing off
3) Installation procedure which includes cleaning, applying sealant, positioning the housing and tightening bolts in a specific sequence and torque.
This document provides a wiring diagram for a 1997-2001 Toyota Corolla with a 1.6L 4A-FE engine. It lists over 30 components and sensors in the engine bay along with their identification codes. It also specifies the manufacturer, model, engine code, output, emissions standard, and year. Color codes are provided for identifying cable colors.
1997 1998 1999 Yamaha VMAX 500/600/700 Service Repair Manualjkmsedol
This is the Highly Detailed factory service repair manual for the1997 1998 1999 YAMAHA VMAX 500/600/700, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.1997 1998 1999 YAMAHA VMAX 500/600/700 Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Periodic Inspection and Adjustment
Chassis
Power Train
Engine Overhaul
Cooling System
Carburetion
Electrical
Specifications
Optional Kit
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have1997 1998 1999 YAMAHA VMAX 500/600/700 Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
1997 1998 1999 Yamaha Venture 500/600 Service Repair Manualqwuikm
This is the Highly Detailed factory service repair manual for the1997 1998 1999 YAMAHA VENTURE 500/600, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.1997 1998 1999 YAMAHA VENTURE 500/600 Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Periodic Inspection and Adjustment
Chassis
Power Train
Engine Overhaul
Cooling System
Carburetion
Electrical
Specifications
Optional Kit
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have1997 1998 1999 YAMAHA VENTURE 500/600 Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
YAMAHA FL225AET OUTBOARD Service Repair Manual X: 000101-jkksejkdm
This is the Highly Detailed factory service repair manual for theYAMAHA FL225AET OUTBOARD, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.YAMAHA FL225AET OUTBOARD Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General information
Specifications
Periodic checks and adjustments
Fuel system
Power unit
Lower unit
Bracket unit
Electrical systems
Troubleshooting
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveYAMAHA FL225AET OUTBOARD Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
1994 1995 1996 Yamaha VMAX 500/600 Service Repair Manualjkmsmd yedkmd
This is the Highly Detailed factory service repair manual for the1994 1995 1996 YAMAHA VMAX 500/600, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.1994 1995 1996 YAMAHA VMAX 500/600 Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Periodic Inspection and Adjustment
Chassis
Power Train
Engine Overhaul
Cooling System
Carburetion
Electrical
Specifications
Optional Kit
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have1994 1995 1996 YAMAHA VMAX 500/600 Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
1993 YAMAHA VENTURE VT480 SNOWMOBILE Service Repair Manualjksmemmd
This is the Highly Detailed factory service repair manual for the1993 YAMAHA VENTURE VT480 SNOWMOBILE , this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.1993 YAMAHA VENTURE VT480 SNOWMOBILE Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Periodic Inspection and Adjustment
Chassis
Power Train
Engine Overhaul
Carburetion
Electrical
Appendices
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have1993 YAMAHA VENTURE VT480 SNOWMOBILE Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
1997-2004 YAMAHA Venture VT700 SNOWMOBILE Service Repair Manualjkmsmd yedkmd
This is the Highly Detailed factory service repair manual for the1997-2004 YAMAHA VENTURE VT700 SNOWMOBILE, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.1997-2004 YAMAHA VENTURE VT700 SNOWMOBILE Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Periodic Inspection and Adjustment
Chassis
Power Train
Engine Overhaul
Cooling System
Carburetion
Electrical
Specifications
Optional Kit
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have1997-2004 YAMAHA VENTURE VT700 SNOWMOBILE Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
This document provides instructions for removing and installing a flywheel housing on a C18 Industrial Engine WJB. It is a 3-page service manual excerpt that describes:
1) Required tools and safety notices
2) Removal procedure which includes supporting the engine, removing bolts and lifting the housing off
3) Installation procedure which includes cleaning, applying sealant, positioning the housing and tightening bolts in a specific sequence and torque.
This document provides a wiring diagram for a 1997-2001 Toyota Corolla with a 1.6L 4A-FE engine. It lists over 30 components and sensors in the engine bay along with their identification codes. It also specifies the manufacturer, model, engine code, output, emissions standard, and year. Color codes are provided for identifying cable colors.
1997 1998 1999 Yamaha VMAX 500/600/700 Service Repair Manualjkmsedol
This is the Highly Detailed factory service repair manual for the1997 1998 1999 YAMAHA VMAX 500/600/700, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.1997 1998 1999 YAMAHA VMAX 500/600/700 Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Periodic Inspection and Adjustment
Chassis
Power Train
Engine Overhaul
Cooling System
Carburetion
Electrical
Specifications
Optional Kit
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have1997 1998 1999 YAMAHA VMAX 500/600/700 Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
The document provides schematic diagrams and details of the starting system, power distribution system, fuse layouts, and data link connections for a vehicle. It includes diagrams of the starting system components such as the ignition switch, start relay, start solenoid, and their electrical connections. Tables list the component locations and connectors referenced in the diagrams.
1997 2004 yamaha v-max vx700 snowmobile service repair manualjksmermd
This document provides information on periodic inspections and adjustments for a vehicle. It includes inspection and maintenance schedules for the engine, power train, chassis, and electrical systems. Key tasks include checking spark plugs, engine oil, fuel lines, coolant level, drive belts, brake fluid, and lubricating components. The schedules indicate inspection frequencies ranging from pre-operation checks to seasonal maintenance.
Este documento é um catálogo de peças para as motocicletas Honda C-100 BIZ e C-100 BIZ ES. Ele contém instruções para uso do catálogo, índices ilustrados e por número/nome de peças, além de tabelas com especificações e números de série aplicáveis aos diferentes modelos.
This document provides instructions for removing and installing various components of a C13 Industrial Engine, including the valve mechanism cover base, rocker arm and shaft, rocker arm, cylinder head, lifter group, and camshaft. The procedures include illustrations of the components and steps to disconnect harness assemblies, remove bolts, and lift components out of the engine. Safety precautions and notes about component weights and lubrication are also provided.
This document provides the location and numbering of various electrical equipment on a vehicle, along with fault diagnosis and repair information for common electrical issues. It lists 30 items of electrical equipment and their locations. The second part describes symptoms, possible causes, and cures for issues like a low or overcharging battery, starter problems, alternator problems and more. It provides detailed repair instructions for the alternator, including removal, installation, and testing procedures.
1997 2004 yamaha venture vt700 snowmobile service repair manualjksmenmd
This document provides information on periodic inspections and adjustments for a vehicle. It includes inspection and maintenance schedules for the engine, power train, chassis, and electrical systems. Key tasks include checking spark plugs, engine oil, fuel lines, coolant level, drive belts, brake fluid, and lubricating components. The schedules indicate inspection frequencies ranging from pre-operation checks to seasonal maintenance.
The document summarizes the operation of a common rail diesel injection system used in Hino trucks. It describes the main components, including the supply pump that pressurizes the fuel, rail that distributes it, and injectors that provide injection. The electronic control unit controls the injection timing and quantity by opening and closing the injectors using electromagnetic valves. The system allows for precise control of injection pressure and timing to improve performance and reduce emissions compared to conventional diesel systems.
1. The document provides information about the Isuzu 4JH1-TC diesel engine management system, which uses a Bosch VP44 injection pump controlled by an engine control module (ECM) and pump control unit (PSG) that communicate via CAN-bus.
2. The ECM controls fuel injection quantity and timing by exchanging data with the PSG, which actuates the injection pump. They share sensor data and commands via analog signals and CAN-bus.
3. The document outlines the components, electrical circuits, diagnostic procedures and trouble codes for technicians servicing the engine management system.
O documento lista componentes e sensores de um caminhão Volkswagen, incluindo injetores, sensores de temperatura e pressão do motor e ar, válvulas reguladoras de pressão e EGR, e conectores.
This document provides information for diagnosing electrical failures, including performing efficient diagnosis, simulating failure conditions, handling electrical components safely, and checking connectors. Key steps include obtaining details on the failure, inspecting for physical issues, using diagrams to determine involved circuits, repairing or replacing components, and verifying the system works properly under all conditions. Failure simulations include tests for vehicle vibration, heat, freezing, water intrusion, electrical load changes, and cold/hot starts.
This document provides instructions for removing and installing the engine oil pump on a 3054 Industrial Engine. It describes:
1) Removing the front housing, idler gear, retaining ring, and bolts to remove the pump.
2) Cleaning and installing the pump by reversing the removal steps, including applying Loctite and ensuring proper backlash.
3) Removal and installation of an idler gear shaft on some models.
Manual serviço biz125 ks es 00 x6b-kss-001 embreagemThiago Huari
[1] O documento fornece instruções para remoção e instalação da embreagem e seletor de marchas, incluindo especificações e valores de torque.[2] É importante marcar todas as peças durante a desmontagem para garantir a reinstalação correta. [3] Problemas comuns na embreagem, como patinar ou movimentação da moto com a embreagem solta, geralmente podem ser corrigidos ajustando a folga do sistema de embreagem.
The document provides information on servicing an engine, including:
1. Descriptions of engine identification, torque settings, and sealants.
2. Checklists for inspecting injectors and recording test results.
3. Instruction sheets for checking hydraulic pressure on different engine circuits and inspecting injectors.
Este documento describe diferentes sistemas de unidades de control para motores de automóviles. Se analizan las características de las unidades de control para motores a gasolina y diésel, así como los componentes y bloques de trabajo clave en cada sistema. Además, se proporcionan ejemplos de diferentes fabricantes de unidades de control como Bosch, Denso, Continental y Magneti Marelli, y cómo identificar los sistemas específicos.
O documento lista diversos módulos de controle eletrônico para veículos e fornece detalhes técnicos sobre seus principais componentes e funções. É descrito o funcionamento de módulos Bosch, Siemens, Magneti Marelli e outros para veículos da Peugeot, Citroën, Renault e outros.
This document provides instructions for removing and installing a cylinder head on a C18 industrial engine. It includes:
1) Detailed steps for removing the cylinder head such as disconnecting hoses, sensors, and removing bolts.
2) Instructions for installing seals, gaskets and the cylinder head, applying anti-seize compound to bolts, and tightening the bolts in a specific sequence.
3) Notes about cleaning parts and using new gaskets when installing the cylinder head.
This document provides instructions for installing the camshaft on a C15 On-highway Engine. There are two methods described:
1. Install the camshaft from the front of the engine using tools to guide the camshaft into place and ensure proper alignment.
2. Alternatively, the camshaft can be installed from the rear of the engine using an adapter and sleeve to guide the camshaft in from the opposite end.
Both methods require cleaning and lubricating the camshaft before carefully sliding it into position with at least two technicians, being sure to keep it level. Tools are then removed and covers installed to complete the job. Proper timing of gears must also be verified after
DIAGRAMA ELECTRICO INTERACTIVO CAT 336DL Uenr26380001juanManuel1001
This document provides an interactive schematic for a machine. It includes:
- Symbols and definitions for electrical, hydraulic, and other components
- Instructions for setting the screen resolution for best viewing
- Bookmarks panel and hyperlinks to navigate schematic and machine views
- Buttons to zoom, fit to page, and find all callouts
This document is a repair manual for the Ares 806 containing several chapters on repair procedures and specifications for various components. Chapter A covers injection system checking procedures, injection feed components and identification, and the Tier II engine. It includes sections on checking procedures, component identification, operating principles, adjustments, removal/refitting, and diagnostic sheets.
1997 2004 yamaha vt700 st long track snowmobile service repair manualfjsjjdkemmde
This chapter provides information on periodic inspections and adjustments for the machine. It begins with an introduction and then provides a periodic maintenance table that outlines the recommended inspection schedule and items to inspect. The table is divided into inspections for the engine, power train, chassis, and electrical systems. Recommended inspection intervals are listed as pre-operation, every month, and every season. Procedures for specific inspections and adjustments are then outlined in detail according to engine, power train, chassis, and tuning sections.
1997 2004 yamaha vx700 st long track snowmobile service repair manualfhjskemme
This chapter discusses periodic inspections and adjustments for a snowmobile. It begins with an introduction and then provides a periodic maintenance table that lists specific components to inspect or adjust, along with recommended intervals. The table is divided into sections for the engine, power train, chassis, electrical systems, and tuning adjustments. Recommended inspections and adjustments are then described in more detail for each of these sections.
The document provides schematic diagrams and details of the starting system, power distribution system, fuse layouts, and data link connections for a vehicle. It includes diagrams of the starting system components such as the ignition switch, start relay, start solenoid, and their electrical connections. Tables list the component locations and connectors referenced in the diagrams.
1997 2004 yamaha v-max vx700 snowmobile service repair manualjksmermd
This document provides information on periodic inspections and adjustments for a vehicle. It includes inspection and maintenance schedules for the engine, power train, chassis, and electrical systems. Key tasks include checking spark plugs, engine oil, fuel lines, coolant level, drive belts, brake fluid, and lubricating components. The schedules indicate inspection frequencies ranging from pre-operation checks to seasonal maintenance.
Este documento é um catálogo de peças para as motocicletas Honda C-100 BIZ e C-100 BIZ ES. Ele contém instruções para uso do catálogo, índices ilustrados e por número/nome de peças, além de tabelas com especificações e números de série aplicáveis aos diferentes modelos.
This document provides instructions for removing and installing various components of a C13 Industrial Engine, including the valve mechanism cover base, rocker arm and shaft, rocker arm, cylinder head, lifter group, and camshaft. The procedures include illustrations of the components and steps to disconnect harness assemblies, remove bolts, and lift components out of the engine. Safety precautions and notes about component weights and lubrication are also provided.
This document provides the location and numbering of various electrical equipment on a vehicle, along with fault diagnosis and repair information for common electrical issues. It lists 30 items of electrical equipment and their locations. The second part describes symptoms, possible causes, and cures for issues like a low or overcharging battery, starter problems, alternator problems and more. It provides detailed repair instructions for the alternator, including removal, installation, and testing procedures.
1997 2004 yamaha venture vt700 snowmobile service repair manualjksmenmd
This document provides information on periodic inspections and adjustments for a vehicle. It includes inspection and maintenance schedules for the engine, power train, chassis, and electrical systems. Key tasks include checking spark plugs, engine oil, fuel lines, coolant level, drive belts, brake fluid, and lubricating components. The schedules indicate inspection frequencies ranging from pre-operation checks to seasonal maintenance.
The document summarizes the operation of a common rail diesel injection system used in Hino trucks. It describes the main components, including the supply pump that pressurizes the fuel, rail that distributes it, and injectors that provide injection. The electronic control unit controls the injection timing and quantity by opening and closing the injectors using electromagnetic valves. The system allows for precise control of injection pressure and timing to improve performance and reduce emissions compared to conventional diesel systems.
1. The document provides information about the Isuzu 4JH1-TC diesel engine management system, which uses a Bosch VP44 injection pump controlled by an engine control module (ECM) and pump control unit (PSG) that communicate via CAN-bus.
2. The ECM controls fuel injection quantity and timing by exchanging data with the PSG, which actuates the injection pump. They share sensor data and commands via analog signals and CAN-bus.
3. The document outlines the components, electrical circuits, diagnostic procedures and trouble codes for technicians servicing the engine management system.
O documento lista componentes e sensores de um caminhão Volkswagen, incluindo injetores, sensores de temperatura e pressão do motor e ar, válvulas reguladoras de pressão e EGR, e conectores.
This document provides information for diagnosing electrical failures, including performing efficient diagnosis, simulating failure conditions, handling electrical components safely, and checking connectors. Key steps include obtaining details on the failure, inspecting for physical issues, using diagrams to determine involved circuits, repairing or replacing components, and verifying the system works properly under all conditions. Failure simulations include tests for vehicle vibration, heat, freezing, water intrusion, electrical load changes, and cold/hot starts.
This document provides instructions for removing and installing the engine oil pump on a 3054 Industrial Engine. It describes:
1) Removing the front housing, idler gear, retaining ring, and bolts to remove the pump.
2) Cleaning and installing the pump by reversing the removal steps, including applying Loctite and ensuring proper backlash.
3) Removal and installation of an idler gear shaft on some models.
Manual serviço biz125 ks es 00 x6b-kss-001 embreagemThiago Huari
[1] O documento fornece instruções para remoção e instalação da embreagem e seletor de marchas, incluindo especificações e valores de torque.[2] É importante marcar todas as peças durante a desmontagem para garantir a reinstalação correta. [3] Problemas comuns na embreagem, como patinar ou movimentação da moto com a embreagem solta, geralmente podem ser corrigidos ajustando a folga do sistema de embreagem.
The document provides information on servicing an engine, including:
1. Descriptions of engine identification, torque settings, and sealants.
2. Checklists for inspecting injectors and recording test results.
3. Instruction sheets for checking hydraulic pressure on different engine circuits and inspecting injectors.
Este documento describe diferentes sistemas de unidades de control para motores de automóviles. Se analizan las características de las unidades de control para motores a gasolina y diésel, así como los componentes y bloques de trabajo clave en cada sistema. Además, se proporcionan ejemplos de diferentes fabricantes de unidades de control como Bosch, Denso, Continental y Magneti Marelli, y cómo identificar los sistemas específicos.
O documento lista diversos módulos de controle eletrônico para veículos e fornece detalhes técnicos sobre seus principais componentes e funções. É descrito o funcionamento de módulos Bosch, Siemens, Magneti Marelli e outros para veículos da Peugeot, Citroën, Renault e outros.
This document provides instructions for removing and installing a cylinder head on a C18 industrial engine. It includes:
1) Detailed steps for removing the cylinder head such as disconnecting hoses, sensors, and removing bolts.
2) Instructions for installing seals, gaskets and the cylinder head, applying anti-seize compound to bolts, and tightening the bolts in a specific sequence.
3) Notes about cleaning parts and using new gaskets when installing the cylinder head.
This document provides instructions for installing the camshaft on a C15 On-highway Engine. There are two methods described:
1. Install the camshaft from the front of the engine using tools to guide the camshaft into place and ensure proper alignment.
2. Alternatively, the camshaft can be installed from the rear of the engine using an adapter and sleeve to guide the camshaft in from the opposite end.
Both methods require cleaning and lubricating the camshaft before carefully sliding it into position with at least two technicians, being sure to keep it level. Tools are then removed and covers installed to complete the job. Proper timing of gears must also be verified after
DIAGRAMA ELECTRICO INTERACTIVO CAT 336DL Uenr26380001juanManuel1001
This document provides an interactive schematic for a machine. It includes:
- Symbols and definitions for electrical, hydraulic, and other components
- Instructions for setting the screen resolution for best viewing
- Bookmarks panel and hyperlinks to navigate schematic and machine views
- Buttons to zoom, fit to page, and find all callouts
This document is a repair manual for the Ares 806 containing several chapters on repair procedures and specifications for various components. Chapter A covers injection system checking procedures, injection feed components and identification, and the Tier II engine. It includes sections on checking procedures, component identification, operating principles, adjustments, removal/refitting, and diagnostic sheets.
1997 2004 yamaha vt700 st long track snowmobile service repair manualfjsjjdkemmde
This chapter provides information on periodic inspections and adjustments for the machine. It begins with an introduction and then provides a periodic maintenance table that outlines the recommended inspection schedule and items to inspect. The table is divided into inspections for the engine, power train, chassis, and electrical systems. Recommended inspection intervals are listed as pre-operation, every month, and every season. Procedures for specific inspections and adjustments are then outlined in detail according to engine, power train, chassis, and tuning sections.
1997 2004 yamaha vx700 st long track snowmobile service repair manualfhjskemme
This chapter discusses periodic inspections and adjustments for a snowmobile. It begins with an introduction and then provides a periodic maintenance table that lists specific components to inspect or adjust, along with recommended intervals. The table is divided into sections for the engine, power train, chassis, electrical systems, and tuning adjustments. Recommended inspections and adjustments are then described in more detail for each of these sections.
1997 2004 yamaha v-max vx700 snowmobile service repair manualfhsejkdkmem
This document provides a periodic maintenance table that outlines recommended inspections and adjustments to perform on a vehicle. It includes items to check or replace for the engine, power train, chassis, and electrical systems. The table indicates the inspection frequency, such as pre-operation, every month, or every season. Examples include checking spark plugs, engine oil, drive belts, brakes, and lubricating components. Following this preventative maintenance helps ensure reliable operation and longer service life.
1997 2004 yamaha vt700 dx deluxe snowmobile service repair manualfhsejkdkme
This chapter outlines the periodic inspection and adjustment procedures recommended to ensure reliable machine operation and a long service life. It includes a periodic maintenance table that lists specific inspection and maintenance items, along with recommended intervals. The table covers items for the engine, power train, chassis, and electrical systems. Performing the preventive maintenance in this table will reduce costly repairs.
1997 2004 yamaha vx700 st long track snowmobile service repair manualjkmsme ekdmm
This document provides information on periodic inspections and adjustments for a vehicle. It includes a table that lists specific items to inspect or adjust, along with recommended inspection intervals. Items include spark plugs, engine oil, fuel lines, coolant, carburetors, drive belts, brakes, drive chain, and other components. The table provides details on inspection points, remarks, and recommended replacement intervals. Proper periodic maintenance is important to ensure reliable operation and longer service life.
1994 Yamaha Viking VK 540 Series Snowmobile Service Repair Manualjkksemd yeuyhd
This is the Highly Detailed factory service repair manual for the1994 YAMAHA VIKING VK 540 SERIES SNOWMOBILE, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.1994 YAMAHA VIKING VK 540 SERIES SNOWMOBILE Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Periodic Inspection and Adjustments
Engine Overhaul
Carburetion
Power Train
Chassis
Electrical
Appendices
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have1994 YAMAHA VIKING VK 540 SERIES SNOWMOBILE Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
2002 yamaha viking vk 540 series snowmobile service repair manualjksmenmd
This chapter covers periodic inspections and adjustments for various vehicle systems. A periodic maintenance table outlines recommended check points and intervals for the engine, carburetor, drive system, and other areas. Detailed inspection and adjustment procedures are provided for items like the engine oil level, idle speed, ignition timing, drive belts, brake pads, and track tension. Following the recommended maintenance helps ensure reliable operation and a longer service life.
2001 yamaha viking vk 540 series snowmobile service repair manualhjsmemm
This chapter discusses periodic inspections and adjustments for a snowmobile. It includes a periodic maintenance table listing maintenance tasks and intervals. It also provides lubrication intervals and instructions for inspecting and adjusting various components, such as shroud covers, seat, handlebar cover, windshield, speedometer, headlight, engine, and more. Special tools may be required for some tasks. Proper maintenance is important to keep the snowmobile in good operating condition.
1997 yamaha viking vk 540 series snowmobile service repair manualhjsemmmd
This chapter discusses periodic inspections and adjustments for a snowmobile. It includes a periodic maintenance table listing maintenance tasks and intervals. It also provides lubrication intervals and instructions for inspecting and adjusting various components, such as shroud covers, the seat, handlebar cover, windshield, speedometer, headlight, engine, and more. The goal is to keep the snowmobile in good working condition through regular inspections and maintenance.
2000 yamaha viking vk 540 series snowmobile service repair manualjkjsekmd
This chapter discusses periodic inspections and adjustments for a snowmobile. It includes a periodic maintenance table listing maintenance tasks and intervals. It also provides lubrication intervals and instructions for inspecting and adjusting various components, such as shroud covers, seat, handlebar cover, windshield, speedometer, headlight, engine, and more. Special tools may be required for some tasks. Proper maintenance is important to keep the snowmobile in good operating condition.
1998 yamaha viking vk 540 series snowmobile service repair manualjksejkmds
This chapter provides guidance on periodic inspections and adjustments for snowmobiles. It outlines key checkpoints to examine for the engine, carburetor, drive system, chassis, and electrical components at regular intervals. Following the recommended maintenance helps ensure reliable operation and extends the life of vehicles. Technicians should be familiar with the inspection and adjustment procedures described.
1991 Yamaha Viking VK 540 Series Snowmobile Service Repair Manualhjskejdm
This is the Highly Detailed factory service repair manual for the1991 YAMAHA VIKING VK 540 SERIES SNOWMOBILE, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.1991 YAMAHA VIKING VK 540 SERIES SNOWMOBILE Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Periodic Inspection and Adjustments
Engine Overhaul
Carburetion
Power Train
Chassis
Electrical
Appendices
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have1991 YAMAHA VIKING VK 540 SERIES SNOWMOBILE Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
2003 yamaha viking vk 540 series snowmobile service repair manualjksmermd
This chapter covers periodic inspections and adjustments for various vehicle systems. A maintenance table outlines recommended checks and services to perform every 20, 40, 80 hours or seasonally, including inspecting bolts, belts, brakes, carburetor settings, engine components and ignition timing. Detailed procedures then provide guidance on adjusting items like idle speed, cable play, pump stroke, sheave distance and more.
1997 2004 yamaha venture vt700 snowmobile service repair manualfjjsekdmme
This chapter outlines periodic inspection and adjustment procedures for a snowmobile. It includes a periodic maintenance table that lists components to inspect and maintain, along with recommended intervals. The table covers engine, power train, chassis, and electrical components. Detailed inspection and adjustment procedures are provided for items like spark plugs, oil pump, cooling system, carburetor synchronization, drive belt, track tension, and more. Proper preventative maintenance using this schedule helps ensure reliable operation and a longer service life.
1997 2004 yamaha vx700 e (le) electric start snowmobile service repair manualfhjsjkdmemm
The periodic maintenance table outlines inspections and adjustments to perform on a regular basis to ensure reliable machine operation, including checking fluid levels, inspecting components for wear and damage, adjusting drive belts and chains, lubricating parts, and replacing items like spark plugs, filters, and brake fluid according to the specified schedule. Inspections and adjustments are recommended after the initial operation, every month or 800 km, and every season or 3,200 km, with additional decarbonization and carburetor tuning as needed based on operating conditions.
1997 2004 yamaha vt700 e (le) electric start snowmobile service repair manualfjsekkxszdmmem
The document provides a periodic maintenance table that lists inspection and maintenance items to perform on a machine. It includes items for the engine like spark plugs, oil, coolant, and carburetors. For the power train it includes the drive belt, track, and brakes. The chassis section covers the ski/ski runner and steering. Electrical items include checking the headlight beam. The table provides frequencies for checks from pre-operation to every 3,200 km.
1999 yamaha viking vk 540 series snowmobile service repair manualfhsejkdkme
The periodic maintenance table outlines inspection and adjustment procedures to perform on various components of the snowmobile including the engine, drive train, chassis, and body. Key tasks include checking for loose or worn parts, adjusting drive chain slack and track tension, inspecting belts and brakes, and tuning the carburetor. Following this preventative maintenance schedule helps ensure reliable operation and extends the life of the vehicle.
2005 yamaha viking vk 540 series snowmobile service repair manualfjjskdmnenemm
This chapter discusses periodic inspections and adjustments for a snowmobile. It includes maintenance schedules, lubrication intervals, inspection and adjustment procedures for the shroud, engine, drive train, chassis, electrical systems, and tuning adjustments. The maintenance tasks are grouped by vehicle component and range from simple inspections to more complex procedures like adjusting ignition timing.
2000 yamaha viking vk 540 series snowmobile service repair manualfhsejkdkmem
This document provides a periodic maintenance table and instructions for inspecting and adjusting various components of a snowmobile, including the shroud, engine, powertrain, chassis, and electrical systems. The maintenance table outlines inspection and adjustment points that should be checked every 20, 40, or 80 hours of operation or seasonally. The following sections provide detailed instructions for conducting engine oil checks, idle speed adjustment, belt inspections, brake adjustments, and other routine maintenance procedures.
1998 yamaha viking vk 540 series snowmobile service repair manualfjsekkxszdmmem
This document provides maintenance and inspection procedures for a snowmobile. It includes periodic maintenance schedules and instructions for inspecting and adjusting various components including shroud covers, the engine, drive train, suspension, and electrical systems. Special tools required for tune-ups and repairs are also listed. The document aims to help owners properly maintain their snowmobile for optimal performance and safety.
Similar to 1997 1998 1999 yamaha mountain max 600700 service repair manual (20)
Yanmar 4 tnv98 industrial engine service repair manualjksmermd
The document encourages the reader to click a link for more information after thanking them for reading. It provides a brief message asking the reader to click a link and states it will provide more information after they do so.
Yale c910 glc25 vx lift truck service repair manualjksmermd
The document provides a service manual for GLC20VS, GLC25VX, GLC30VX, GLC35VX lift trucks, with sections covering various systems and components. It describes the frame assembly, which includes the counterweight, fuel and hydraulic tanks. Procedures are provided for removing and installing the counterweight, hood, overhead guard, engine, and side covers. Maintenance technicians must take safety precautions like blocking the lift truck when removing heavy components to maintain stability.
Yale b974 gdp20 lx lift truck service repair manualjksmermd
This document provides instructions for removing and installing various components on the frame of GLP20LX, GLP25LX, GDP20LX, and GDP25LX lift trucks, including the hood, seat, side covers, dash panel, and electrical cover. The steps describe disconnecting wire harnesses, removing mounting hardware, and lifting parts off the frame. Safety warnings are provided about putting the trucks on blocks for stability when large heavy parts are removed.
Yale b910 glc35 vx lift truck service repair manualjksmermd
The document provides instructions for removing and installing the hood, seat, and side covers on various lift truck models. Key steps include:
1. Removing the floor mat, floor plate, side covers, dash, and kick panel to access the hood and seat.
2. Disconnecting the seat wire harness and removing 4 capscrews to lift the seat off the hood.
3. Removing hinge screws and gas springs to lift the hood off the frame.
4. Reinstalling follows the reverse order, ensuring the gas springs and hinge screws are securely fastened to specified torque values. Tables provide details on gas spring installation points for different seat and model configurations.
Toyota 30 7 fbcu30 forklift service repair manualjksmermd
This document is a service manual for the Toyota electric forklift models 7FBCU15 to 55 series from July 2001. It provides specifications, maintenance, repair, diagnostic and service procedures for the chassis, body, electrical controls, and material handling system.
The manual is intended to assist technicians in providing quick and correct servicing for the corresponding forklift models. It deals with models produced as of July 2001, but designs and specifications may have changed since then.
The manual is organized by section with topics including general information, the battery, multi-display functions, troubleshooting, the motor, drive unit, front and rear axles, steering, brakes, body, material handling system, mast,
Mercury mercruiser marine engine in line diesel d4.2 l d-tronic service repai...jksmermd
This document is the service manual for Mercury Marine in-line diesel engines. It provides general information on engine operation and maintenance procedures. The manual outlines maintenance schedules and procedures for engine systems including lubrication, cooling, fuel, and electrical systems. It also covers maintenance of drive systems and components. Photos show external views of the engine and components are labeled for identification.
Liebherr pr721 c crawler dozer service repair manualjksmermd
This document provides technical specifications for a PR 751 crawler dozer in three sections. It details the diesel engine, hydraulic and electrical systems, and general machine components. The diesel engine is an inline 6-cylinder intercooled and turbocharged unit producing 276 kW. The hydraulic system uses multiple gear pumps and motors to power travel, replacement, cooling and other circuits. General components include a 3-stage gear travel system, track undercarriage, and attachment specs.
Liebherr lr 622 lr622 crawler loader series 2 litronic service repair manualjksmermd
This document provides guidelines for the proper handling and disposal of service fluids and filters for LIEBHERR crawler dozers, loaders, and pipelayers. It discusses approved engine oils and their viscosity grades based on temperature, diesel fuel specifications, coolant requirements, and mixing ratios for winter diesel fuel. Instructions are given for disposing of used fluids and filters in an environmentally friendly manner according to regulations.
Jcb 3170 plus fastrac service repair manualjksmermd
Dacromet fasteners have lower torque settings than zinc plated fasteners due to their corrosion resistant coating. The document provides lists of torque settings for zinc plated and Dacromet fasteners of various sizes, along with some specific examples of component locations and their torque settings. Safety must come first when working on machines.
Jcb 2115 fastrac service repair manual sn:00740003 00740637jksmermd
The document provides information about torque settings for fasteners on JCB Fastrac machines. It distinguishes between zinc-plated fasteners and newer Dacromet fasteners, listing specific torque values for bolts of different sizes for each type. It also provides identifying information for machine components, a brief introduction to the service manual contents and layout, and safety warnings.
Jcb 722 fastrac service repair manual sn:00833001 00833111jksmermd
This document provides information about vehicle identification, torque settings for fasteners, service tools, sealing compounds, towing procedures, hydraulic hose connections, and hydraulic system contamination for a JCB articulated dump truck. It includes tables of torque specifications for different sizes and types of fasteners. Sections cover identifying the vehicle, engine, and transmission using identification plates and numbers. Procedures are outlined for connecting and disconnecting hydraulic hoses safely. Guidelines are provided for preventing and cleaning hydraulic system contamination.
Jcb 531 70 telescopic handler service repair manual sn:1522574 to tbajksmermd
This document is the service manual section 1 general information for JCB side engine loadall machines. It provides an introduction to the machines covered and applications tables listing which topics in the manual are applicable to each machine model. The tables cover sections 1 through 3 on general information, care and safety, and routine maintenance as well as sections B through K on specific systems.
Jcb 520 40 load control (supplement) service repair manualjksmermd
The LCS load control system provides protection against tipping forward by progressively reducing boom lowering and tilt functions as stability limits are approached. It has two modes - Load Control mode, which is automatic, and Ground Work mode, which functions like a standard LMI. In Load Control mode, boom lowering and tilt are derated, while extend functions normally until the limit. Once reached, lowering, tilting, crowding and dumping are prevented to avoid further instability. Boom lift and retract allow load retrieval. The system uses LED indicators and switches to monitor stability and select modes.
The document promotes clicking a link to obtain more information. It thanks the reader for their time and directs them to click a specified link in order to learn more details. The overall message is encouraging the reader to follow the given link by promising additional information will become available if they do.
Hitachi zaxis 240 lch excavator service repair manualjksmermd
- This document provides safety guidelines for operating heavy machinery.
- It instructs operators to wear protective equipment, secure seat belts, avoid distractions, and only start the engine from the operator's seat.
- Operators are also advised to be aware of bystanders and not allow riders on the machine for their safety.
2009 arctic cat m1000 sno pro 162 ltd snowmobiles service repair manualjksmermd
This document contains specifications and technical information for Arctic Cat snowmobiles. It includes sections on identification numbers, recommended fuels and oils, break-in procedures, storage procedures, maintenance schedules, engine specifications, electrical specifications, torque specifications, and more. High altitude operation is discussed, noting that components like carburetion and clutches may need adjustment for optimal performance at different elevations.
2003 yamaha sx viper 700 service repair manualjksmermd
This document provides instructions and specifications for the periodic inspection, adjustment, and maintenance of various systems for a snowmobile, including the chassis, powertrain, engine, cooling system, carburetion, electrical, and specifications. It emphasizes the importance of thorough cleaning, using proper tools, keeping mated parts together, and following torque specifications for repairs. It also provides details on machine identification numbers, replacement parts, handling of gaskets, seals, bearings, circlips, and use of Loctite for fasteners.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Hand Gesture Control Robotic Arm using image processing.pptx
1997 1998 1999 yamaha mountain max 600700 service repair manual
1. ® @
ICHAsld' -------
®
ISPECI er I IOPT I0 I
@~@~
@~ ®~
1
m 1
B
1.
a@
__B*
OE031
ILLUSTRATED SYMBOLS
(Refer to the illustration)
Illustrated symbols CD to @> are designed as
thumb tabs to indicate the chapter's number and
content.
CD General information
<ID Periodic inspection and adjustment
@ Chassis
@ Power train
<ID Engine overhaul
® Cooling system
en Carburetion
® Electrical
® Specifications
@> Optional kit
Illustrated symbols ® to ® are used to identify
the specifications which appear.
® Filling fluid
@ Lubricant
@ Tightening
® Wear limit, clearance
@ Engine speed
@) Special tool
®n,V,A
Illustrated symbols @) to @ in the exploded dia-
gram indicate grade of lubricant and location of
lubrication point.
@) Apply locking agent (LOCTITE®)
@) Apply engine oil
@ Apply gear oil
@ Apply molybdenum disulfide oil
@ Apply wheel bearing grease
@ Apply low-temperature lithium-soap base grease
@ Apply molybdenum disulfide grease
@ Apply Yamabond No.5®
3. ______________________________~~~IJieI
CHAPTER 1.
GENERAL INFORMATION
MACHINE IDENTIFICATION ............................. 1-1
FRAME SERIAL NUMBER .......................... 1-1
ENGINE SERIAL NUMBER ......................... 1-1
IMPORTANT INFORMATION ............................ 1-2
PREPARATION FOR REMOVAL AND DIS-
ASSEMBLY .................................................. 1-2
ALL REPLACEMENT PARTS ....................... 1-3
GASKETS, OIL SEALS, AND O-RINGS ...... 1-3
LOCK WASHERS/PLATES AND COTTER
PINS .............................................................1-3
BEARINGS AND OIL SEALS ....................... 1-3
CIRCLlPS ......................................................1-4
SPECIAL TOOLS ................................................ 1-4
FOR TUNE UP .............................................1-4
FOR ENGINE SERVICE ................................ 1-5
FOR POWER TRAIN SERVICE .................... 1-6
FOR ELECTRICAL SERVICE ........................ 1-7
4. MACHINE IDENTIFICATION II~~~l-:AsI
1-1
lEOOl
GENERAL
INFORMATION
MACHINE IDENTIFICATION
FRAME SERIAL NUMBER
The frame serial number CD is located on the·
right-hand side of the frame (just below the
front of the seat).
ENGINE SERIAL NUMBER
The engine serial number CD is located on the
right-hand side of the crankcase.
NOTE: _______________________
The first three digits of these numbers are for
model identification; the remaining digits are the
unit production number.
Starting Serial Number:
VX500U ......•. SAB-000101 ..
VX500EU ..•...SBp·000101..
VX500STU ....SBN·000101 ..
VX500DXU ... SBB·000101..
VX600U ........8CA·0001 01..
VX600EU ......SCF·000101..
VX600STU ....SCC·000101 ..
VX600DXU ...SCB·000101 ..
NOTE: _________________________
Designs and specifications are subject to change
without notice.
5. IMPORTANT INFORMATION 1~~~1......1
1-2
lEOll
IMPORTANT INFORMATION
PREPARATION FOR REMOVAL AND DIS-
ASSEMBLY
1. Remove all dirt, mud, dust, and foreign
material before removal and disassembly.
While cleaning, take care to protect the
electrical parts, such as relays, switches,
motor, resistors, controllers, etc., from high
pressure water splashes.
2. Use proper tools and cleaning equipment.
Refer to SPECIAL TOOLS .
3. When disassemblingthe machine, keep mated
parts together. This includes gears, cylinders,
pistons, and other parts that have been
mated through normal wear. Mated parts
must be reused as an assembly or replaced.
4. During disassembly ofthe machine, clean all
parts and place them in trays in the order of
disassembly. This will speed up assembly
time and help ensure that all parts are rein-
stalled correctly.
5. Keep away from fire.
6. Be sure to keep to tightening torque specifi-
cations. When tightening bolts, nuts, and
screws, start with larger-diameter pieces, and
proceed from an inner-positioned one to an
outer-positioned one in a criss-cross pattern.
6. IMPORTANT INFORMATION 1~~~1.1LI
300-000
300-002
300-003
'-3
ALL REPLACEMENT PARTS
1.We recommend use ofYamaha genuine parts
for all replacements. Use oil and/or grease
recommended by Yamaha for assembly and
adjustment.
GASKETS, OIL SEALS, AND O-RINGS
1. All gaskets, seals, and a-rings should be re-
placed when an engine is overhauled. All
gasket surfaces, oil seal lips, and a-rings must
be cleaned.
2. Properly oil all mating parts and bearings
during reassembly. Apply grease to the oil
seal lips.
LOCK WASHERS/PLATES AND COTTER
PINS
1. All lock washers/plates CD and cotter pins
must be replaced when they are removed.
Lock tab(s) should be bent along the bolt or
nut flat(s) after the bolt or nut has been prop-
erly tightened.
BEARINGS AND OIL SEALS
1.lnstall the bearing(s) CD and oil seal(s) ®
with their manufacturer's marks or numbers
facing outwards. (In other words, the
stamped letters must be on the side exposed
to view.) When installing oil.seal(s), apply a
light coating of lightweight lithium base
grease to the seal lip(s). Oil the bearings
liberally when installing.
Do not use compressed air to spin the bearings
dry. This causes damage to the surface of the
bearings.
7. IMPORTANT INFORMATION/SPECIAL TOOLS I~~~I~I
300·001
1-4
CIRCLlPS
1. All circlips should be inspected carefully be-
fore reassembly. Always replace piston pin
clips after one use. Replace misshapen
circlips. When installing acirclip D, make sure
that the sharp edged corner ® is positioned
opposite to the thrust ID it receives. See the
sectional view.
@ Shaft
lE021
SPECIAL TOOLS
Some special tools are necessary for completely
accurate tune-up and assembly. Using the correct
special tool will help prevent damage that can be
caused by the use ofimpropertools or improvised
techniques.
NOTE: _______________________
Be sure to use the correct part number when
ordering the tool, since the part number differs
according to the area as shown below. The first
part number is for Europe, and the second part is
for the U.S.A. and Canada.
e.g. 90890 - *****, YU- *****
FORTUNE UP
• Sheave Gauge
PIN YS-91047-3 D, YS-39506-5 ®
This gauge is used to measure sheave distance
and for offset adjustment.
lE041
• Dial Gauge
PIN 90890-03097, YU-03097
This gauge is used for run out measurement.
8. 1-5
SPECIAL TOOLS I~~~I~IlE051
• Fuel Level Gauge
PIN 90890-01312, YM-01312-A
This gauge is used to measure the fuel level in the
float chamber.
lE061
• Vacuum Gauge
PIN -, YS-33275
This gauge is used for carburetor synchroniza-
tion.
1E071
FOR ENGINE SERVICE
• Piston Pin Puller
PIN 90890-01304, YU-01304
This tool is used to remove the piston pin.
lE081
• Rotor Puller
PIN 90890-01362, YU-33270
This tool is used to remove the magneto rotor.
lE091
• Cooling System Tester
PIN 90890-01325, YS-22460-01
This tester is used for checking cooling system.
9. '-6
SPECIAL TOOLS II~~~I~IlEl0l
FOR POWER TRAIN SERVICE
• Primary Sheave Holder
PIN 90890-01701, YS-01880
This tool is used to hold the primary sheave.
lElll
• Primary Sheave Puller (18 mm)
PIN YS-01881-1 CD, YS-38517 CV
Thistool is used for removing the primary sheave.
lE121
• Clutch Spider Separator
PIN 90890-01711, YS-28890-8
This tools are used when disassembling and as-
sembling the primary sheave.
lE131
• Clutch Separator Adapter
PIN 90890-01740, YS-34480
This tool is used when disassembling and assem-
bling the primary sheave.
lE171
• Clutch busing jig kit
PIN YS-39752
Thistool is used when removing and installing the
primary sheave busing.
10. 1-7
SPECIAL TOOLS II~~~ISsI
1E141
• Track Clip Installer
PIN 90890-01721. YS-91045-A
This tool is used for installing the track clip.
1E151
FOR ELECTRICAL SERVICE
• Pocket Tester
PIN 90890-03112. YU-03112
This instrument is necessary for checking the
electrical components.
1E161
• Electra Tester
PIN 90890-03021. YU-33260-A
This instrument is invaluable for checking the
electrical system.
12. INTRODUCTION/PERIODIC MAINTENANCE TABLE I':g~I_I2EOO5
PERIODIC INSPECTIONS AND ADJUSTMENTS
INTRODUCTION
This chapter includes all information necessary to perform recommended inspections and adjustments.
These preventive maintenance procedures, iffollowed, will ensure more reliable machine operation and
a longer service life. In addition, the need for costly overhaul work will be greatly reduced. This
information applies to machines already in service as well as new machines that are being prepared for
sale. All service technicians should be familiar with this entire chapter.
PERIODIC MAINTENANCE TABLE
First Every
Pre- Month Season
Item Remarks operation or or
check first 800 km 3,200 km
(Daily) (500 Mi) (2,000 Mi)
(40 hr) (160 hr)
Spark Plug:
Check condition adjust the gap and clean.
•Replace if necessary.
Check oil level.
•Engine Oil:
*Air bleed the oil pump if necessary.
•
*Oil Filter:
Check condition.
•Replace if necessary.
Fuel: Check fuel level.
•Check condition.
*Fuel Filter: Replace if necessary. •
*Fuel Line:
Check fuel hose for cracks or damage.
•Replace if necessary.
*Oil Line:
Check oil hose for cracks or damage.
•Replace if necessary.
Check coolant level.
•Engine Coolant
*Air bleed the cooling system if necessary.
•Check throttle lever operation.
•Carburetor Whenever operating condition
*Adjust the jets. (elevation!temperature) is changed.
Check wear and damage. Replace if necessary.
•*Water Pump Belt
Adjust water pump belt if necessary.
•
Manual Starter:
Check operation and rope damage.
•*Replace if necessary.
Engine Stop Switch:
Check operation
•*Repair if necessary.
Throttle 9verride System:
Check operation.
•*Repair if necessary.
Check operation.
Throttle Lever:
*Repair if necessary. •
*Exhaust System:
Check for leakage.
•Retighten or replace gasket if necessary.
*Decarbonization: More frequently if necessary.
•
Drive V-belt Guard:
Check cracks, bends or damage.
•*Replace if necessary.
Drive V-belt: Check wear and damage. Replace if necessary.
•
Drive Track/Idler Wheels:
Check deflection, wear and damage.
•*Adjust/replace if necessary.
Slide Runner
Check wear and damage.
•*Replace if necessary.
•*: It is recommended that these items be serviced by a Yamaha dealer or other qualified mechanic.
2-1
13. _ _ _ _ _~_ _ _ _ IIANDSJPllo)lPERIODIC MAINTENANCE TABLE _ _~ _
First Every
Pre- Month Season
Item Remarks operation or or
check first 800 km 3,200 km
(Daily) (500 Mi) (2,000 Mi)
(40 hr) (160 hr)
Check operation.
•Brake/
*Adjust free play and/or replace pads if neces-
Parking Brake
sary. •Check oil level.
•*Drive Chain Oil
Replace.
•
*Drive Chain:
Check deflection.
**.Adjust if necessary.
Ski/ Check wear and damage.
•Ski Runner *Replace if necessary.
•
Steering System
Check operation.
•*Adjust toe-out if necessary.
•
Lights:
Check operation.
•Replace bulbs if necessary.
Check fluid level.
•Battery *Check specific gravity and breather pipe opera-
tion.
•Charge/Correct if necessary.
Check engagement and shift speed.
•Adjust if necessary. Wheneveroperatingelevation ischanged.
*Primary Sheave Check wear and damage.
•Replace if necessary.
Lubricate with specified grease.
•Lubricate with specified grease.
•*Secondary Sheave
Adjust if necessary. Whenever operating elevation ischanged.
*Steering Column Bearing: Lubricate with specified grease.
•*Ski and Front Suspension: Lubricate with specified grease.
•*Suspension Component: Lubricate with specified grease.
•*Brake Cable End and Lubricate with specified grease.
•Lever End/ Throttle Check cable damage.
Cable End Replace if necessary. •
Shroud Latches: Make sure the shroud latches are hooked.
•
Fittings/Fasteners:
Check tightness.
•*Repair if necessary.
Service Tools/Spare Parts: Check proper placement.
•*: It is recommended that these items be serviced by a Yamaha dealer or other qualified mechanic.
**: Perform after 1 Month or 80 km (50 Mi) and every 1 Month or 800 km (500 Mi).
2-2
14. _________________________S_M_R_K_PL_U__G p:gSI~1
®*=::::::::;~I/)
377-000
(·~_J1-)CD..' fi...----~41
2-3
2EOll
ENGINE
SPARK PLUG
1. Remove:
• Spark plug
2. Inspect:
• Electrode CD
Wear/Damage~Replace.
• Insulator color ®
3. Measure:
• Plug gap@
Out of specification~Regap.
Use wire thickness gauge.
Spark plug gap:
0.7 - 0.8 mm (0.028 - 0.032 in)
Clean the plug with a spark plug cleaner if
necessary.
Standard spark plug:
BR9ES (NGK)
Before installing a spark plug, clean the
gasket surface and plug surface.
4. Tighten:
• Spark plug
Spark plug:
28 Nm (2.8 m • kg, 20 ft • Ib)
NOTE: ________________________
Finger-tighten CD the spark plug before torquing
® to specification.
15. _________________________O_I_LP_U_M_P II:g~ltill
2-4
2E021
OIL PUMP
Air Bleeding
The oil pump and delivery line must be bled on
the following occasions:
• When any portion of the oil system has been
disconnected.
• When the machine has been turned on its side.
• Whenever the oil tank has been run empty.
• During pre-delivery.
1. Remove:
• Reservoir tank ill
2. Fill:
• Oil tank ill
Oil tank capacity:
2.9 L (2.6 Imp qt, 3.1 US qt)
Recommended oil:
Vamalube 2-cycle oil
3. Loosen the oil tank bolt ®.
4. Place a rag under the oil pump assembly to
catch oil.
5. Disconnect:
• Oil hose ill
6. Keep the oil running out until air bubbles
disappear from the oil hose ill.
7. Connect:
• Oil hose ill
8. Disconnect:
• Oil delivery hoses ill
9. Feed the uYamalube 2-cycle oil into the oil
delivery hoses ill using an oil can ® for com-
plete air bleeding.
10. Connect:
• Oil delivery hoses ill
16. _________________________O_I_LP_U_M_P II:g!I~1
2-5
11. Remove:
• Bleed screw D
• Gasket (bleed screw)
12. Keep the oil running out until air bubbles
disappear from bleed hole.
13. Inspect:
• Gasket (bleed screw)
Wear/Damage ~ Replace.
14. Install:
• Gasket (bleed screw)
• Bleed screw
Cable Adjustment
NOTE: _________________________
Before adjusting the oil pump cable, the throttle
cable distcmce should be adjusted.
Adjustment steps:
• Loosen the locknut D.
• Turn the adjuster® in or out until the speci-
fied distance is obtained.
~
Distance® :
VX500(E)fSTfOX:
25 - 27 mm (0.98 - 1.06 in)
VX600(ElfSTfOX:
27 - 29 mm (1.06 -1.14 in)
Turning in Distance ® is increased.
Turning out Distance ® is decreased.
• Tighten the locknut and push in the adjuster
cover.
17. 800-001
801·002
8OHl03
OIL FILTER INSPECTION II:g~ItAI
2-6
2E031
OIL FILTER INSPECTION
1. Remove:
• Oil filter CD
NOTE: _______________________
Plug the oil hoses so that the oil will not run outof
the oil tank and oil pump.
2. Inspect:
• Oil filter CD
Contamination ~ Replace.
Recommended replacement interval:
Every season
3. Reverse the removal procedure.
2E041
FUEL LINE INSPECTION
1. Inspect:
2E051
• Fuel hoses
• Fuel delivery hoses
Crack/Da mage~Replace.
FUEL FILTER INSPECTION
1. Remove:
• Seat
2. Disconnect:
• Tail/brake light coupler
3. Remove:
• Spring bands CD
• Cap®
• Fuel filter @
4. Inspect:
• Fuel filter CD
Contamination ~ Replace.
Recommended replacement interval:
Every season
5. Reverse the removal procedure.
18. COOLING SYSTEM ~
------------------------------------------------------
IlANOSJP Ito) I
2-7
2E061
COOLING SYSTEM
Coolant Replacement
NOTE: _______________________
The coolant should be changed at least
seasonally.
1. Place the machine on a level surface.
2. Remove:
• Side cowling (right)
• Seat
• Muffler CD
• Exhaust pipe ®
3. Remove:
• Coolant filler cap CD
A WARNING
Do not remove the coolant filler cap CD when the
engine is hot. Scalding hot fluid and steam may
be blown out under pressure, which could cause
serious injury. When the engine has cooled, place
thick rag like atowel overthe radiator cap, slowly
rotate the cap counterclockwise to the detent.
This procedure allows any residual pressure to
escape. When the hissing sound has stopped,
press down on the cap while turning
counterclockwise and remove it.
4. Place an open container under the drain bolts
CD·
S.Remove:
• Drain bolts
6. Drain the coolant.
NOTE: _________________________
Lift up the tail ofthe machine to drain the coolant.
19. o
2-8
COOLING SYSTEM 1':gS14rl1
7. Disconnect:
• Coolant hoses CD (rear)
8. Drain the coolant.
NOTE:____________
Liftupthe front ofthe machineto drainthe coolant
completely.
A WARNING
Coolant is poisonous. It is harmful or fatal if
swallowed.
• Ifcoolantisswallowed, induce vomiting imme-
diately. Get immediate medical attention.
• If coolant splashes in eyes, flush with water.
Call a physician.
• If coolant splashes on skin or clothes, wash
immediately with soap and water.
9. Remove the reservoir tank CD and drain the
coolant.
10. Install:
• Reservoir tank
11. Inspect:
• Gaskets (drain bolt)
Damage~Replace.
12. Install:
• Gaskets
• Drain bolts
• Exhaust pipe/gaskets
• Muffler
13. Fill:
Drain bolt:
23 Nm (2.3 m· kg, 17 ft· Ib)
Bolts (exhaust pipe):
23 Nm (2.3 m • kg, 17 ft· Ib)
• Cooling system
Recommended Coolant:
High quality ethylene glycol
anti-freeze containing
corrosion inhibitor
Coolant and water mixed ratio:
SO%: 400/0
Total amount:
VX500(E)/VXSOO(E)/VX500DX/
VXSOODX
4.2 L (3.70 Imp qt, 4.44 US qt)
VX500ST/VXSOOST
4.S L (4.05 Imp qt, 4.8S US qt)
Reservoir tank capacity:
0.2 L (0.18 Imp qt, 0.21 US qt)
20. _ _________ IIANDSJPI ..~ ICOOLING SYSTEM _ _~ _
2-9
• Hard water or salt water is harmful to the
engine parts; use boiled or distilled water.
• Do not use water containing impurities or oil.
14. Bleed air from the cooling system.
15. Inspect:
• Cooling system
Decrease of pressure (leaks)~Repair as re-
quired. (see page 6-4)
Inspection steps:
• Attach the Cooling System Tester D (90890-
01325, YU-22460-01) to the coolant fi lIer ®.
• Apply 100 kPa (1.0 kg/cm2, 14 psi).
• Measure the pressure with gauge.
2E071
Air bleeding
1. Bleed air from the cooling system.
Air bleeding steps:
• Lift up the tail of the machine.
• Connect plastic tubes D tightly to the bleed
screws ® on the heat exchanger.
• Loosen the bleed screws ® of Heat ex-
changer.
• Keep the coolant running out until air bub-
bles disappear, while adding coolant slowly
to the radiator.
• Tighten the bleed screws.
~ Bleed screw:
~ 6 Nm (0.6 m • kg, 4.3 ft • Ib)
• Add coolant to fill the specified level ®.
• Loosen the bleed bolt @ on the water pump
housing.
• Keep the coolant running out until air bub-
bles disappear.
• Tighten the bleed bolt.
Bleed bolt:
6 Nm (0.6 m • kg, 4.3 ft • Ib)
21. _ _ _ _ _ _ _ _ _ _ _ 1lANDSJP 1~ ICOOLING SYSTEM . . ~ .
2·10
• Install the radiator cap.
Apply and lock the parking brake. Start the
engine and run it at approximately 2500 ...
3000 rpm until the thermostat opens and the
coolant circulates (approximately 3 ... 5 min-
utes). The rear heat exchanger will be warm
to the touch.
A WARNING
To avoid severe injury or death:
• Makesurethe machineissecurely supported
with a suitable stand.
• Do not exceed 3000 rpm. The machine could
unexpectedly move forward if the clutch
engages, ordrive line damage and excessive
V-belt wear could occur.
• Operate the engine only in a well-ventilated
area.
• Remove the radiator cap and bleed air on the
cooling system again, as shown in the steps
above.
No air bubbles ~ OK.
• Add coolant up to the specified level.
• Pour coolant into the reservoir tank CD until
the coolant level reaches HFULLHlevel mark.
2E081
Water Pump Belt Deflection Adjustment
1. Remove:
• Muffler
2. Check:
• Drive belt deflection
Out of specification~Adjust.
Drive belt deflection
8 mm (0.31 in)/
8 kg (17.6Ib)
(NEW BELT)
8 mm (0.31 in)/
13 ... 20 kg (28.7 ... 44.1 Ib)
3. Adjust:
• Drive belt deflection
Adjustment steps:
• Remove the recoil starter CD.
• Attach the Primary Sheave Holder (90890-
01701, YS-01880)to hold the primarysheave.
22. 2-11
COOLING SYSTEM II~g!Itll
• Remove the starter pulley 0.
• Remove the screws @ of the starter pulley.
• Adjust the drive belt deflection by adding or
removing a shim G).
Add shim Tension becomes lower.
Remove shim Tension becomes higher.
Shim size
Part number Thickness
8CA-15721-00 0.5 mm (0.02 in)
8CA-15722-00 1.0 mm (0.04 in)
• Install the starter pulley and drive belt.
• Recheck the drive belt deflection. If out of
specification, readjust the drive belt deflec-
tion.
4. Tighten:
Starter pulley bolt:
23 Nm (2.3 m· kg, 17 ft· Ib)
Recoil starter bolt:
10 Nm (1.0 m • kg, 7.2 ft· Ib)
23. _ _ _ _ _ _ _ _ _ _ liANOSJPlfO) ICARBURETOR SYNCHRONIZATION . . ~ .
2-12
2E094
CARBURETOR SYNCHRONIZATION
1. Remove:
• Carburetor assembly
(see page 7-2)
2. Adjust:
• Carburetor synchronization
Adjustment steps:
• First adjustthe throttle valve height@ at the
No.2 carburetor by turning the throttle stop
screw CD until the specified height is ob-
tained.
I~
Throttle valve height:
VX500 (E)/ST/DX:
1.5 mm (0.059 in)
VX600 (E)/ST/DX:
1.6 mm (0.063 in)
• Second adjust the throttle valve height@on
the No.1® carburetor with adjusting eccen-
tric nut@.
• Move the throttle lever 2 - 3 times.
• Make sure all the carburetor throttle valves
are on the same height.
• Install the carburetor.
• Remove the air chamber and then plug the
hole in the carburetor joint with plug and
connect the Vacuum Gauge (YS-33275) to
the fitting.
• Start the engine and let it warm up.
• If vacuum reading are not same, turn the
adjusting eccentric nut@inoroutsothatthe
vacuum reading are the same.
NOTE: ______________________
When read the vacuum gauge, make sure
carburetor covers G) are installed.
24. ENGINE IDLE SPEED ADJUSTMENT/ IINSPI(0) ITHROTTLE CABLE ADJUSTMENT ADJ ~
L...:.':'::;';:;......_';;;:'=..I
2-13
2El0l
ENGINE IDLE SPEED ADJUSTMENT
1.Adjust:
• Engine idle speed
Adjustment steps:
• Start the engine and let it warm up.
• Turn the throttle stop screws CD in or out
to adjust the engine idle speed.
Turning in Idle speed becomes higher.
Turning out Idle speed becomes lower.
Cl Engine idle speed:
1,450 - 1,650 r/min
NOTE:
After adjusting the engine idle speed, the
throttle cable free play should be adjusted.
2E131
THROTTLE CABLE ADJUSTMENT
NOTE: _______________________
Before adjusting the throttle cable free play, the
engine idle speed should be adjusted.
1. Measure:
• Throttle cable free play ®
Out of specification~Adjust.
Throttle cable free play:
1.0 - 2.0 mm (0.04 - 0.08 in)
2. Adjust:
• Throttle cable free play
Adjustment steps:
• Loosen the locknut CD.
• Turn the adjuster ® in or out until the speci-
fied free play is obtained.
Turning in Free play is increased.
Turning out Free play is decreased.
• Tighten the locknut.
25. THROTTLE OVERRIDE SYSTEM (T.O.R.S.) CHECKI IINSPI(0) ISTARTER (CHOKE) CABLE ADJUSTMENT ADJ ~
a...:....;;.::;;..;::;~_-=-.=..I
®
2·14
2El22
THROTTLE OVERRIDE SYSTEM (T.O.R.S.)
CHECK
A WARNING
When checking T.O.R.S.:
• Be sure the parking brake is applied.
• Be sure the throttle lever moves smoothly.
• Do not run the engine upto clutch engagement
rpm. Otherwise. the machine could start
moving forward unexpectedly. which could
cause and accident.
1. Start the engine.
NOTE: _______________________
Refer to STARTING THE ENGINE.
2. Hold the pivot point ofthe throttle lever away
from the throttle switch CD.
3. Press CV the throttle lever gradually.
The T.O.R.S warning light should turn on and
off and the engine should run between 2800
and 3000 rpm.
A WARNING
Ifthe engine does not run between 2800 and 3000
rpm. stop the engine by turning the main switch
to OFF position and consult a Yamaha dealer.
2E131
STARTER (CHOKE) CABLE ADJUSTMENT
1. Pull the outer tube of starter cable CD upward.
2. Measure:
• Starter cable free play ®
Out of specification -7 Adjust.
Freeplay@:
0.5 .. 1.5 mm (0.02 .. 0.06 in)
3. Adjust:
• Starter cable free play
Adjustment steps:
• Loosen the locknut CD.
• Turn the adjuster CV in or out until the speci-
fied free play is obtained.
Turning in Free play is increased.
Turning out Free play is decreased.
• Tighten the locknut and push in the adjuster
cover.
26. ________________________D_R_IV_E_V_-B_El__T p:gSI~1
2E141
POWER TRAIN
DRIVE V-BELT
A WARNING
• Be sure there are shims (2 pes) CD between
secondary fixed and sliding sheaves when·
installing the NEW belt.
805030 • Ifthere is no gap, the clutch engagement speed
L-_ _ _ _ _ _....;;;~;;..-._ _ _ _ _ _..... will be reduced. The machine may move
805-029
805-020
2-15
unexpectedly when the engine is started.
• The spacer of the secondary sheave should be
adjusted.
To ensure proper clutch performance, the
spacers in the secondary clutch must be
repositioned as the V-belt wears.
V-belt width CD
Number
of spacers
~ 31.6 mm (1.24 in) or more 2 spacers
00.l 30.6 mm (1.20 in) 1 spacer
[9 29.6 mm (1.17 in) No spacer
28 mm (1.1 in) or less
Replace the
V-belt
1. Remove:
• Drive V-belt guard CD
27. ________________________D_R_IV_E_V_-B_El___• P:g!I~1
805-009
2-16
2. Remove:
• Drive V-belt CD
Removal steps:
• Rotate the secondary sliding sheave clock-
wise ® and push it @ so that it separates
from the fixed sheave.
• Pull @ the belt up over the secondary fixed
sheave.
• Remove the belt from the secondary sheave
and primary sheave.
3. Inspect:
• Drive V-belt
CrackJWear/Damage ~ Replace.
Oil orgrease adhering tothe V-belt ~ Check
the primary and secondary sheaves.
4. Inspect:
• Primary sheave
• Secondary sheave
Oil or grease adhering to the primary and
secondary sheaves ~ Remove the oil or
grease using a rag soaked in lacquerthinner
or solvent. Check the primary and secon-
dary sheaves.
5. Measure:
• Drive V-belt length ®
Out of specification ~ Replace.
Drive V-belt length:
1,130 - 1,118 mm (44.5 - 44.0 in)
28. ENGAGEMENT SPEED CHECK I':gsI_I
2-17
2E201
ENGAGEMENT SPEED CHECK
1. Place the machine on a level area of hard
packed snow.
2. Check:
• Clutch engagement speed
Checking steps:
• Start the engine, and open the throttle lever
gradually.
• Check the engine speed when the machine
starts moving forward.
Out of specification ~ Adjust the primary
sheave. (see page 2-36)
C) Engagement speed:
VX500(E)fSTfDX
Approx. 3,700 rfmin
VX600(E)fSTfDX
Approx. 3,600 rfmin
29. ®
~I
I
I
I
I
I
I
I
I
_J
BRAKE PAD INSPECTION/DRIVE CHAIN II~gjI_I
2-18
2E161
BRAKE ADJUSTMENT
BRAKE PAD INSPECTION
1. Apply the brake lever.
2. Measure:
• Brake pad thickness ®
Out of specification ~ Replace brake pads
as a set. (see page 4-27)
I~ Wear limit:
v ~ 5.2 mm (0.2 in)
NOTE: _________________________
Adjust brake every 40 hours of operation, or
whenever the brake lever becomes loose during
operation.
3. Measure:
• Distance L
Out of specification --) Adjust.
Distance ULU
69.0 ~ 71.0 mm (2.72 ~ 2.8 in)
4. Adjust:
• Distance L
Adjustment steps:
• Loosen the locknut CD.
• Turn the adjuster CV in or out until the speci-
fied distance is obtained.
Turning in Distance uLu is increased.
Turning out DistanceuLU is decreased.
• Tighten the locknut CD.
2E171
DRIVE CHAIN
Oil Level Inspection
1. Place the machine on a level surface.
2. Remove:
• Muffler
3. Place a rag under the checking hole CD (oil
level).
4. Remove:
• Checking bolt CV
• Gasket (checking bolt)
30. _____________D_RI_VE_C_H_A_IN p:gjI_I
2-19
5. Inspect:
• Oil level (drive chain housing)
Oil flows out ~ Oil level is correct.
Oil does not flow out ~ Oil level is low.
Add oil until oil flows out.
Recommended oil:
Gear oil API GL-3 SAE #75 or #80
6. Inspect:
• Gasket (checking bolt)
Damage ~ Replace.
7. Tighten:
Checking bolt:
10 Nm (1.0 m· kg, 7.2 ft· Ib)
Oil Replacement
Oil replacement step:
• Warm up the engine for several minutes.
• Remove the Muffler.
• Place some rags under the chain housing
and place a small gutter to channel the oil
into the hole.
• Lift up the front of the machine.
• Remove the drain plug CD.
Be sure to remove any oil from the heat protec-
tor.
2E182
Recommended oil:
Gear oil API GL-3 SAE #75 or #80
Oil capacity:
VX500 (E)/500ST/600(E)/600ST:
250 cm3 (8.8 Imp OZ, 8.5 US OZ)
VX500DX/600DX:
300 cm3 (10.6 Imp OZ, 10.1 US OZ)
Chain Slack Adjustment
1. Adjust:
• Drive chain slack
Adjustment steps:
• Loosen the locknut CD and unthread sealing
washer CV slightly.
• Turn the adjuster @ in until it is finger tight.
• Tighten the locknut.
31. CD ...®
TRACK TENSION ADJUSTMENT I':gsI_I
820003
820-004
2-20
2E151
TRACK TENSION ADJUSTMENT
A WARNING
A broken track, track fittings, or debris thrown
by the track could be dangerous to an operator
or bystanders. Observe the following
precautions.
• Do not allow anyone to stand behind the
machine when the engine is running.
• When the rear of the machine is raised to allow
the track to spin, a suitable stand must be used
to support the rear ofthe machine. Never allow
anyone to hold the rear of the machine off the
ground to allow the track to spin. Never allow
anyone near a rotating track.
• Inspect track condition frequently. Replace the
track if it is damaged to the depth where fabric
reinforcement material is visible.
• Never install studs (cleats) closer than three
inches to the edge of the track.
1. Place the machine with the right side facing
down.
2. Measure:
• Track deflection CD
Pull at the track center window exerting a
force of 10 kg (22 Ib) using a spring scale 0.
Out of specification ~ Adjust.
Track deflection:
25 .. 30 mm (0.98 .. 1.18 in)
3. Adjust:
• Track deflection
Adjustment steps:
• Lift the rear of the machine onto a suitable
stand to raise the track off the ground.
• Loosen the rear axle nut CD.
NOTE: ____________
It is not necessary to remove the cotter pin 0.
32. TRACK TENSION ADJUSTMENT! IINSPIto) ISLIDE RUNNER INSPECTION ADJ ~
L...:.,':'=;':.L--=.=...I
820-008
820-005
@+
820009
~ ~
~..... _ _ _ _ _ _ _ .J
820-001
a. Starttheengine and rotate the track one or
two turns. Stop the engine.
b. Check the track alignment with the slide
runner CID.
If the alignment is incorrect. turn the left
and right adjusters to adjust.
Track alignment
@ Shifted (j) Shifted
to right to left
@ Left adjuster Turn out Turn in
CID Right adjuster Turn in Turn out
® Slide runner ® Track
@ Track metal ® Gap @ Forward
c. Adjust track deflection to the specified
amount.
Track deflection
More than Less than
specified specified
@ Left adjuster Turn in Turn out
CID Right adjuster Turn in Turn out
The adjusters should be turned an equal
amount.
• Recheck alignment and deflection. If neces-
sary, repeat steps a to c until proper adjust-
ment is achieved.
• Tighten the rear axle nut.
Rear axle nut:
75 Nm (7.5 m • kg, 54 ft· Ib)
SLIDE RUNNER INSPECTION
1. Inspect:
• Slide runner CD
Cracks/DamageMlear~Replace.
2. Measure:
• Slide runner thickness CV
Out of specification~Replace.
(see page 4-33)
~ W~~!:~:03::,_n_)______--J
33. IlANDSJP Ito) ISKI/SKI RUNNER/STEERING SYSTEM ~
------------------------------------------------------
2·22
2E212
CHASSIS
SKI/SKI RUNNER
1. Check:
• Ski
• Ski runner
• Ski cover
Wear/Damage ~ Replace.
Ski runner wear limit G):
8 mm (0.31 in)
Do not operate the machine without the ski cover
to prevent ski wear and damage.
2E221
STEERING SYSTEM
Free Play check
1. Check:
• Steering system free play
Push the handlebar up and down and back
and forth.
Turn the handlebar slightly to the right and
left.
Excessive free play ~ check to be sure the
handlebar, tie rod ends and relay rod ends
are installed securely in position.lffree play
still exists, check the steering bearing front
suspension links and ski mounting area for
wear, and replace if necessary.
(see page 3-9)
34. IlANDSJP. I(0) ISTEERING SYSTEM/HEADLIGHT BEAM ADJUSTMENT ~
------------------------------------------------------
2-23
2E232
Toe-Out Adjustment
1. Place the machine on a level surface.
2. Check:
• Ski toe-out
Direct the skis straight forward.
Out of specification~Adjust.
Ski toe - out (@ - @):
0.0 .. 15.0 mm (0.0 .. 0.6 in)
Ski stance (6) (center to center):
1,010 mm (39.8 in)
3. Adjust:
• Ski toe-out
Adjustment steps:
• Loosen the locknuts CD (tie-rod).
• Turn the relay rod ® in or out until the
specified toe-out is obtained.
• Tighten the locknuts CD (tie-rod).
Locknut (rod end):
X 25 Nm (2.5 m· kg, 18 ft· Ib)
LOCTITE®
~ Left side
[§] Right side
2E241
HEADLIGHT BEAM ADJUSTMENT
1. Place the machine on a level surface.
2. Inspect:
• Headlight beam direction
L
H
The high beam should be directed down-
wards at an angle of 1/20
to the horizontal.
If not, adjust the direction.
3.0 m (10 ft) 7.6 m (25 ft)
26 mm (1.0 in) 66 mm (2.6 in)
3. Adjust:
• Headlight beam direction
Adjust the headlight beam by tightening or
loosening the adjusters CD.
35. LUBRICATION ~
------------------------------------------------------
IlANOSJP Ito) I
A
2-24
2E251
LUBRICATION
Brake Lever, Brake Cable End and
Throttle Lever
1. Lubricate the brake lever pivot. brake cable
end and throttle lever.
I_IESSO Beacon 325 Grease
A WARNING
Apply a dab of grease to the cable end only.
Do not grease the brake/throttle cables
themselves because they could become frozen,
which could cause loss of control.
2E261
Front and Rear ~uspension
1.lnjectgreasethrough nipplesG) using agrease
gun.
--.. Esso Beacon 325 Grease or
Aeroshell Grease #7A.
g] Front
[ID Rear
36. IlANDSJP I~ ICARBURETOR TUNI~G ~
-----------------------------------------------
2·25
2E271
TUNING
CARBURETOR TUNING
The carburetor is set at the factory to run at
temperatures of O°C .. -20°C (32°F .. -4°F) at
sea level. If the machine has to be operated
underconditions otherthanthosespecified above, .
the carburetor must be reset as required. Special
care should be taken in carburetor setting so
that the piston will not be damaged or seized.
In this model, the engine oil is mixed with the
fuel just before the fuel enters the carburetors.
During initial fuel flow to the carburetor it is not
always possible to supply the optimum fuel/oil
mixture depending on the throttle opening.
Therefore, afterthe carburetors have been tuned
or maintained, or after the float chamber is
removed for cleaning or jet replacement, be sure
to idle the engine for about three minutes in
order to avoid engine trouble.
Before performing the carburetor tuning, make
sure that the following items are set to
specification.
• Engine idle speed adjustment
• Throttle cable free play adjustment
• Carburetor synchronization
• Starter cable adjustment
• Oil pump cable free play adjustment
Carburetor Tuning Data
1. Standard specifications
MODEL VX5OO(E)/ST/DX VX600(EIIST/DX
Type TM36-B2S TM3S-B103
Manufacturer MIKUNI ~
1.0. Mark SAB-OO aeA-OO
Main jet (M.J.) #151.3 #156.3
Pilot jet (P.J.) #45 #52.5
Pilot air jet
02.5 ~
(P.A.J.)
Pilot screw 1-1/S ~
(P.S.) turns out
Float height
20.3 .. 24.3 mm
(0.799..0.957 in)
~
Idle speed 1,450..1,60rIm +-
37. .-
CARBURETOR TUNING II:gsI_I
2-26
2E281
Middle-Range and High Speed Tuning
No adjustment is normally required, but adjust-
ments may sometimes be necessary, depending
on temperatures and/or altitude.
Middle-range speed and high speed tuning (from
1/4 to full-throttle) can be done by adjusting the
main jet.
The engine should never be run without the air
intake silencer and air chamber installed; severe
engine damage may result.
1. Start the engine and operate the machine
under normal conditions to make sure the
engine operates smoothly. Then stop the en-
gine.
2. Remove:
• Spark plugs
3. Check:
• Spark plug insulator CD color
A medium to light tan color indicates nor-
mal conditions.
Distinctly different color ~ Replace main
jet.
4. The main jet should be adjusted on the basis
of the following HMain jet selection chart.
NOTE: ________________________
By checking the condition of the spark plugs
currently being used, itiseasyto get some idea of
the engine condition and catch potential
problems before they are too far advanced.
38. IlANDSJP Ito) ICARBURETOR TUNING ~
-----------------------------------------------
FOR VX500 (E)/ST/DX
~[ID
Altitude
0- 100 m
(0 - 300 ft)
100 - 600 m
(300 - 2,000 ft)
600 - 1,200 m
(2,000 - 4,000 ft)
1,200 - 1,800 m
(4,000 - 6,000 ft)
1,800 - 2,400 m
(6,000 - 8,000 ft)
2,400 - 3,000 m
(8,000 - 10,000 ft)
-30oe
(-22°F)
I
MJ #156.3
MJ #153.8
MJ #151.3
-20oe
(-4°F)
I
..~
2E291
2. High altitude tuning
Use the following guide to select main jets
according to variations in elevation and tem-
perature.
-10oe ooe 100 e 200 e
(14°F) (32°F) (50°F) (68°F)
I I I I
MJ #153.8 ~
... MJ #151.3
....-..MJ #151.3 (STO)----..
~ ... MJ #148.8 IN:2
.....- MJ #148.8 IN:2 ---.
~ .. MJ #146.3 IN:2
....-.. MJ #146.3 IN:2 ----.
r--MJ #148.8JN:2--. .. MJ #143.8 IN:2
.... MJ #143.8 IN:2 ....
f---MJ #146.3 IN:2--' ..
...-MJ #140 IN:2----..
PJ #50 AS:3/4
r----MJ #143.8 IN:2--. ..
2-27
MJ #140 IN:2
MJ #137.5 IN:2
PJ #50 AS:3/4
[9 # : Main jet number
[Q] IN: Jet needle clip position
WAS: Air screw turns out
[£] PJ : Pilot jet number
39. FOR VX600 (E)/ST/DX
~[ID
Altitude
0- 100 m
(0 - 300 ft)
100 - 600 m
(300 - 2,000 ft)
600 - 1,200 m
(2,000 - 4,000 ft)
1,200 - 1,800 m
(4,000 - 6,000 ft)
1,800 - 2,400 m
(6,000 - 8,000 ft)
2,400 - 3,000 m
(8,000 - 10,000 ft)
CARBURETOR TUNING I':gj1-.1
-30°C -20°C -10°C O°C 10°C 20°C
(-22°F) (-4°F) (14°F) (32°F) (50°F) (68°F)
1 I
... MJ #160 ..MJ #162.5 .. ... MJ #157.5
...--MJ #156.3 (STD)----.
MJ #158.8 .. ... MJ #153.8 IN:2
...-- MJ #153.8 IN:2----'
MJ #156.3 .. ... MJ #151.3 IN:2
...-- MJ #151.3 IN:2----.
-MJ #153.8 IN:2---. ... MJ #148.8 IN:2
...-- MJ #148.8 IN:2----.
- MJ #151.3 IN:2--'
...--
-MJ #147.5 IN:2--'
MJ #145 IN:2
... MJ #145 IN:2
----.
... MJ #142.5 AS:7/8
IN:2
[g # : Main jet number
[QJ IN: Jet needle clip position
[[] AS: Air screw turns out
[.EJ PJ : Pilot jet number
NOTE: ________________________
These jetting specifications are subjectto change.
Consult the latest technical information from
Yamaha to be sure you have the most up-to-date
jetting specifications.
CD Clip
® Jet needle
@ Air screw
G) Main jet
2-28
42. IlANOSJP I(0) ICARBURETOR TUNING ~
--------------------------------------~--------------
2·31
2E391
Low Speed Tuning
The carburetor is built so that low speed tuning
can bedone byadjustingtheairscrewandthrottle
stop screw CD.
The engine should never be run without the air
intake silencer and air chamber installed; severe
engine damage may result.
1. Tighten the air screw lightly, and back it out
from its lightly seated position.
Standard tuning out:
1-1/8
2. Start the engine, and allow it to warm up for a
few minutes. The warm-up is complete when
the engine responds normally to the throttle
opening.
A WARNING
Do not move the throttle enough to reach the
following engagement speed. The snowmobile
could accidentally start to move forward.
Engine revolutions: 2,600 r/min
3. Adjustthethrottle stop screws evenly untilthe
engine speed is at 2,000 - 2,500 r/min.
4. Slowly loosen the pilot screws evenly. As the
pilot screw is loosened, the mixture will be
come leaner, and engine speed will increase.
Adjust the pilot screws to attain the highest
possible engine speed.
43. CARBURETOR TUNING II:g!.I_1
2-32
5. Finally, setthe engine idle speed bytuning the
throttle stop screws in (to increase engine
speed) or out (to decrease engine speed).
Standard idle speed:
1,450 .. 1,650 rfmin
6. If the engine low speed performance is still
poor in high elevation under extreme condi-
tions, the standard pilot jets may need to be
replaced to obtain proper pilot air/fuel mix-
ture.
NOTE: ________________________
In this case, set the carburetor on the richer side;
use a larger number pilot jet with a highes
number.
Standard pilot jet:
VX500(E)fSTfOX: #45
VX600(E)fSTfOX: #52.5
7. By repeating steps 1to 5above, adjustthe idle
speed.
44. IlANDSJP I'~ ICARBURETOR TUNING ~
------------------------------------------------------2E311
Main jet selection chart
Spark plug color Check up Remedy
Light tan or gray. Carburetor is tuned properly.
Dry black or fluffy
Mixture is too rich. Replace main jet with the next smaller size.deposits.
White or light gray. Mixture is too lean. Replace main jet with the next larger size.
White or gray insulator
with small black or gray
Due to too lean a mixture, the
Replace the piston and spark plug.
brown spots and Tune the carburetor again, starting with low-
electrodes having a piston is damaged or seized.
speed tuning.
bluish-burnt appearance.
Melted electrodes and Check the piston for holes or seizure.
possibly blistered Check the cooling system, gasoline octane rating
insulator. Due to too lean a mixture, the and ignition timing. After replacing the spark plug
Metallic deposits on spark plug melts. with a colder type, tune the carburetor again
insulator. starting with low-speed tuning.
2-33
45. __________IIANOSJPI·ollCARBURETOR TUNING . . ~ .
2E321
Troubleshooting
Trouble
Hard starting
Poor idling
(Related troubles)
• Poor performance
at low speeds
• Poor acceleration
• Slow response to
throttle
• Engine tends to
stall
Poor performance at
mid-range speeds
(Related troubles)
• Momentary slow
response to throttle
• Poor acceleration
Poor performance at
normal speeds
(Related troubles)
• Excess fuel con-
sumption
• Poor acceleration
Check point
Insufficient fuel
Excessive use of starter
(Excessively opened
choke)
Fuel passage is clogged
or frozen
Overflow
Improper idling speed
adjustment
• Pilot screw
• Throttle stop screw
Damaged pilot screw
Clogged bypass hole
Clogged or loose pilot
jet
Air leaking into carbu-
retor joint
Defective starter valve
seat
Overflow
Clogged or loose pilot
jet
Lean mixtures
Clogged air vent
Clogged or loose main
jet
Overflow
Remedy Adjustment
Add gasoline
Clean spark plug Return starter level to its
seated position.
Clean Parts otherthan aircarburetor.
• Clogged fuel tank air vent,
clogged fuel filter, or
clogged fuel passage.
Carburetor
• Clogged or frozen air vent,
or clogged valve.
• If water collects in float
chamber, clean.
(Also check for ice)
Correct
Bottom the pilot screw lightly,
and back it outto specification.
Adjust idling speed Start the engine and turn pilot
screw in and out 1/4 turn each
time. When the engine runs
faster, back out throttle stop
screw so the engine idles at
specified speed.
Tightened too much - Engine
speed is higher.
Adjust Backed out too much - Engine
does not idle.
Replace pilot screw
Clean
Clean and retighten Remove pilot jet, and blow it
out with compressed air.
Retighten bend
screw
Clean or replace
Correct
Clean and retighten Remove pilot jet, and blow it
out with compressed air.
Overhaul carburetor
Clean Remove the air vent pipe, and
clean.
Clean and retighten Remove main jet, and blow it
out with compressed air.
Check float and float
valve and clean
2·34
46. CARBURETOR TUNING I':gs1_I
Trouble Check point Remedy Adjustment
Poor performance at Starter valve is left Fully close valve Return starter lever to its
high speeds open home position.
(Related troubles) Clogged air vent Remove and clean
• Power loss
• Poor acceleration
Clogged or loose main Clean and retighten Remove main jet and clean
jet with compressed air, then
install.
Clogged fuel pipe Clean or replace
Dirty fuel tank Clean fuel tank
Air leaking into fuel Check joint and re-
line tighten
Low fuel pump per- Repair pump or re-
formance place
Clogged fuel filter Replace
Clogged intake Check for and
remove ice
Abnormal combus- Lean mixtures Clean carburetor
tion and adjust
(Mainly backfire) Dirty carburetor Clean carburetor
Dirty or clogged fuel Clean or replace fuel
pipe pipe
Overflow Clogged air vent Clean
(Related troubles) Clogged float valve Disassemble and Clean while taking care not to
• Power idling clean scratch valve seat.
• Poor performance
Scratched or unevenly Clean Valve seat is press'fitted toat low, mid-range, or replace
and high speeds worn float valve or float valve and valve body.
• Excessive fuel valve seat seat The body must be replaced if
consumption seat is damaged.
• Hard starting Broken float Replace float
• Power loss Incorrect float level If not within the
• Poor acceleration
specified range,
check the following
parts and replace
any defective part.
• Worn float tang • Replace float Replace float assembly.
• Worn pin • Replace arm pin
• Deformed float arm • Replace float
2-35
48. Clutch Setting Data (VX600(E)/DX)
~Item
o~ 1,000 m
3,500 ft
(STD)
lID Idle speed: Approx. 1,550rpm
[g Clutch engagement: Approx. 3,600rpm
rnl Shift speed: Approx. 7,650rpm
[g] Geering: 20/37
!El Primary spring:
IQ] Color L·Y·L
IBl Length 78.0mm
ill Pre-Ioad rate 25.0kg·2.Okgfmm
III Wiredia. 8S.5mm
00 Outside dia. 860mm
~Weight: 8AY-17605-10
IMI Weight rivet: Steel 17.2mm
1Nl Weight bush: Duralon
[Q] Roller bush: Duralon
If] Pri. clutch shim: 1.0 mm x 2pcs.
IQJ Secondary spring:
IQ] Color P
IBl Length 85mm
ill Pre-Ioad rate 500 (A-2)
III Wiredia. fl5.0mm
00 Outer dia. fl65mm
lID Sec. torque cam: 390
rru Sec. clutch shim: None
(VX600ST)
o~ 1,000 m
~Item 3,500 ft
(STD)
lID Idle speed: Approx. 1,550rpm
[g Clutch engagement: Approx. 3,600rpm
rnl Shift speed: Approx. 7,650rpm
[g] Geering: 20/39
!El Primary spring:
[g] Color L·Y· L
IBl Length 78.Omm
ill Pre-Ioad rate 25.0kg·2.0kglmm
III Wiredia. 8S.5mm
00 Outside dia. 860mm
~Weight: 8AY-17605-10
IMI Weight rivet: Steel 17.2mm
1Nl Weight bush: Duralon
[Q] Roller bush: Duralon
If] Pri. clutch shim: 1.0 mm x 2pcs.
IQJ Secondary spring:
IQ] Color P
IBl Length 85mm
ill Pre-Ioad rate 600 (B·2)
III Wiredia. fl5.0mm
00 Outer dia. fl65mm
lID Sec. torque cam: 390
rru Sec. clutch shim: None
900 ~ 1,500 m
3,000 ~ 5,000 ft
(MA)
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
Steel 13.3mm
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
900 ~ 1,500 m
3,000 ~ 5,000 ft
(MA)
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
Steel 13.3mm
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
2-37
CLUTCH TUNING II:g~I_I
1,400 ~ 2,100 m
4,500 ~ 7,000 ft
(MA)
+-
+-
+-
20/39
+-
+-
+-
+-
+-
+-
Aluminum 10.3mm
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
1,400 ~ 2,100 m
4,500 ~ 7,000 ft
(MA)
+-
+-
+-
19/39
+-
+-
+-
+-
+-
+-
Aluminum 10.3mm
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
2,000 m ~
6,500 ft ~
(HA)
+-
+-
+-
19/39
+-
+-
+-
+-
+-
+-
None
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
2,000 m ~
6,500 ft ~
(HA)
+-
+-
+-
18/39
W-Y-W
76.5 mm
25.0 kg-2.25 kg/mm
None
500 (A-2)
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
L ..•.•...Blue
Y .•..•• Yellow
49. CLUTCH TUNING/GEARING SELECTION II:gsI_I
[A] Engine speed
t [ID Good condition
2E331
The clutch may require tuning depending upon
the area of operation and desired handling char-
acteristics. The clutch can be tuned by changing
engagement and shifting speed. Clutch engage-
ment speed is defined as the engine speed where
the machine first begins to move from acomplete
stop.
Shifting speed is the engine speed when the
machine passes a point 200 - 300 m (650 - 1,000
ft) from the starting position afterthe machine has
been started at full-throttle from a dead stop.
Normally, when a machine reaches shift speed,
the vehicle speed increases but the engine speed
remains nearly constant. Under unfavorable con-
ditions (wet snow, icy snow, hills, or rough ter-
rain), however, engine speed may decrease after
the shift speed has been reached.
[A] Engine speed
t
~ Bad condition
[QJClutch [QJ Clutch
shifting speed
[El Clutch
engagement
speed
shifting speed
[El Clutch
engagement
speed
[ill
- [ill Travelled distance. Travelled
- distance
[[) Starting position
200 - 300 mm (650 - 1,000 ft)
GEARING SELECTION
The reduction ratio of driven gear to drive gear
must be set according to the snow condition. If
there are many rough surfaces or unfavorable
snow conditions, the drive/driven gear ratio
should be made larger. If there are few rough
surfaces or better snow condition; the ratio
should be made smaller.
2-38
[[) Starting position
200 - 300 mm (650 - 1.000 ft)
Gear Ratio Chart
The following drive and driven gears and chains
are available as options. The figures in upper
lines represent the driven and drive gear ratios,
while those in lower lines represent the number
of chain links. (see page 2-39)
NOTE: _______________________
Do not set the gearing to any of the indicated
(x) settings.
52. HIGH ALl11lJDE TUNING II:g~14fl12E341
HIGH ALTITUDE TUNING
To attain the best performance in high altitude conditions, carefully tune the snowmobile as outlined
below.
I Test main jet size
(performance plug color)
I
OK
Not OK
!
Decide if problem is pilot jet
and adjust accordingly
f-Not OK--
Not OK
Confirm STD settings
• Carburetor (page 2-25)
• Spark plug (page 2-3)
l
Adjust main jet size according to the
chart (page 2-27)
Adjust main jet size I+-
J.
OK Not OK
OK
Check engagement speed and
shift performance
Adjust primary clutch as re-
quired (page 2-36)
Not OK
Adjust secondary clutch as required
(page 2-36)
High altitude
tuning OK
OK
OK
2-41
53. IlANDSJP Ito) IHIGH ALTITUDE TUNING ~
-----------------------------------------------A
2-42
2E361
Rear Suspension
Stopper band setting
1. Adjust:
• Stopper band length
NOTE: _________________________
This adjustment affects the handling
characteristics of the machine.
Adjustment steps:
• Remove the stopper band securing bolt CV
and washers.
• Adjust the length of the stopper band CD.
~ VX500(E)NX600(E)
VXSOOST/VX600ST/
VXSOODX/VX6OODX
Front [Ki No. 1 No.2
Rear [ID No.1 No.1
• Tighten the bolt (stopper band)
~
Nut (stopper band):
4 Nm (0.4 m • kg, 2.9 ft • Ib)
Choosing other settings:
NOTE:
The standard settings work well under most
general riding conditions. The suspension can
be adjusted to work better in one set of
conditions, but only at the expense of
performance in another. Keep this in mind
when you adjust the suspension.
Front [Ki;
No. 5 hole No. 1 hole
(Shortest) (Longest)
More weight on skis: Less weight on skis:
• Heavy steering/ • Light steering/
oversteer understeer
• More maneuverability • Better acceleration and
Favors: hardpack snow, speed
ice, smooth trails, tight Favors: deep snow,
turns straight line
acceleration, top speed
Rear [ID;
No.l hole No. 5 hole
(Longest) (Shortest)
Less weight on track: More weight on track:
• More suspension • Better acceleration and
travel speed
• Greater riding comfort • Firmer handling
Favors: Rougher trails Favors: deep snow,
smooth surfaces
57. _________________________________S_T_E_ER~I_N_G_lcHASI~
3-2
REMOVAL
1. Remove:
• Handlebar cover CD
2. Disconnect:
• Handlebar switch coupler (right)
• Brake light switch coupler
• Headlight beam switch coupler
• Grip warmer leads
3. Remove:
• Holder CD (throttle cable)
4. Disconnect:
• Throttle cable ®
• Oil pump cable ®
(from throttle lever)
5. Remove:
• Brake cable
Removal steps:
• Loosen the locknut CD.
• Turn in the adjuster fully ®.
• Disconnect the brake cable end ® from the
brake lever.
6. Remove:
• Band
• Handlebar holders CD (upper)
• Handlebar ®
58. _______________________________S_TE_E_R_IN_G_lcHASI~ I
3-3
7. Remove:
• Seat
• Center cover ill
NOTE: _______________________
Remove the holding nuts (main switch,
STARTER lever, and disconnect the grip
warmerswitch couplerwhen removing the center
cover.
8. Remove:
• Intake silencer (see page 7-9)
• Carburetors (see page 7-2)
• Engine assembly (see page 5-1)
9. Remove:
• Cotter pin ill
• Nut (relay rod)
NOTE: _______________________
When removing the relay rod from the steering
column, the relay rod end needs to be held fixed
in order to facilitate the locknut removal.
10. Straighten:
• Lock washer tabs (upper and lower)
•
11.Remove:
• Nuts ill
• Bolts®
• Lock washers
• Bearing holders ID
• Bearings @ (upper)
• Collars
• Steering column ID
• Bearings ® (lower)
59. __________________________________S_T_E_ER_I_N__G ICHASI~
~R
)D
tItS=
:; =
f :=
3-4
12. Remove:
• Cotter pins CD
• Bolts®
• Washers @ (suspension arm side)
13. Remove:
• Cotter pin CD
• Bolt
• Relay rod ®
• Tie rods@
• Cotter pin G)
• Nut@
• Washer
• Relay arm ®
INSPECTION
1. Inspect:
• Handlebar CD
• Steering column ®
Bends/Cracks/Damage ~ Replace.
A WARNING
Do not attempt to straighten a bent column.
This may dangerously weaken the column.
2. Inspect:
• Bearings CD (steering column)
• Collars ®
Wear/Damage ~ Replace.
• Steering column @ (bearing contact
surfaces)
Scratches/Wear/Damage ~ Replace.
3. Inspect:
• Relay rod CD
• Tie-rods ®
Bends/Cracks/Damage ~ Replace.
A WARNING
Do not attempt to straighten a bent rod.
This may dangerously weaken the rod.
60. Thank you very much
for your reading.
Please Click Here
Then Get More
Information.