The document is a manual for an engineering drawing slide show presentation. It contains 7 sections:
1. Introduction
2. Orthographic projection
3. Isometric practice
4. Isometric views
5. Missing views
6. Sectional views
7. Automatic slide show
The manual provides guidance on different types of projections and practice exercises for creating multiview drawings from pictorial views using orthographic projections. It aims to teach the fundamentals of technical drawing.
The document is a site plan for a residential property showing existing structures and proposed additions and modifications. Key elements include:
- Proposed 2-story addition and covered patio/portico additions.
- Modification to the existing screen wall.
- Proposed bridge, swimming pool, hot tub, and swim-up bar.
- Existing and proposed driveway, walkways, landscaping, and parking areas.
- Calculations showing sizes of new and existing structures and lot coverage.
The document appears to be handwritten notes or practice in a foreign script. It contains strokes, characters, and words written in an unfamiliar writing system with no contextual information provided.
1) Draw an ellipse with a focus at point F and directrix CD where the distance between F and CD is 65mm.
2) Divide the line segment CF into 7 equal parts. Mark the third division from F as point V.
3) The ellipse is drawn through points C, V, and B.
The document discusses the procedure for drawing projections of plane figures. It explains that problems will provide the description and position of the plane figure relative to the horizontal and vertical planes. The position is described by the inclination of the surface to one plane and the inclination of an edge to the other plane. It demonstrates solving problems in three steps: 1) Draw initial projections assuming positions, 2) Draw projections after changing surface inclination, 3) Draw final projections after changing edge inclination. Several example problems are provided and discussed step-by-step.
The document discusses the steps to solve problems involving the projections of plane geometric figures. It provides 3 key steps: 1) Draw front and top views of the initial position assuming certain surfaces are parallel to reference planes. 2) Draw new front and top views considering surface inclinations. 3) Draw final front and top views accounting for edge inclinations. Examples are given showing the application of these steps to problems involving rectangles, pentagons, hexagons, circles, and other shapes. Guidance is provided on initial assumptions and tracing outlines between views.
An isosceles triangle plate with a 50mm base and 70mm altitude is placed such that its front view appears as an equilateral triangle with 50mm sides and one side inclined at 45 degrees. To draw the top view: first draw the front view as an equilateral triangle; then draw one side of the front view inclined at 45 degrees to represent how that side appears from above; this gives the shape of the top view.
The document discusses various topics in a disorganized manner, moving between unrelated points. It references economic factors, environmental concerns, and social issues but does not provide meaningful analysis or conclusions.
The document discusses various psychological and social factors. It examines how individual traits interact with environmental influences to impact behaviors and outcomes. Key points addressed include the interplay between personality, attitudes, social pressures, and decision-making.
The document is a site plan for a residential property showing existing structures and proposed additions and modifications. Key elements include:
- Proposed 2-story addition and covered patio/portico additions.
- Modification to the existing screen wall.
- Proposed bridge, swimming pool, hot tub, and swim-up bar.
- Existing and proposed driveway, walkways, landscaping, and parking areas.
- Calculations showing sizes of new and existing structures and lot coverage.
The document appears to be handwritten notes or practice in a foreign script. It contains strokes, characters, and words written in an unfamiliar writing system with no contextual information provided.
1) Draw an ellipse with a focus at point F and directrix CD where the distance between F and CD is 65mm.
2) Divide the line segment CF into 7 equal parts. Mark the third division from F as point V.
3) The ellipse is drawn through points C, V, and B.
The document discusses the procedure for drawing projections of plane figures. It explains that problems will provide the description and position of the plane figure relative to the horizontal and vertical planes. The position is described by the inclination of the surface to one plane and the inclination of an edge to the other plane. It demonstrates solving problems in three steps: 1) Draw initial projections assuming positions, 2) Draw projections after changing surface inclination, 3) Draw final projections after changing edge inclination. Several example problems are provided and discussed step-by-step.
The document discusses the steps to solve problems involving the projections of plane geometric figures. It provides 3 key steps: 1) Draw front and top views of the initial position assuming certain surfaces are parallel to reference planes. 2) Draw new front and top views considering surface inclinations. 3) Draw final front and top views accounting for edge inclinations. Examples are given showing the application of these steps to problems involving rectangles, pentagons, hexagons, circles, and other shapes. Guidance is provided on initial assumptions and tracing outlines between views.
An isosceles triangle plate with a 50mm base and 70mm altitude is placed such that its front view appears as an equilateral triangle with 50mm sides and one side inclined at 45 degrees. To draw the top view: first draw the front view as an equilateral triangle; then draw one side of the front view inclined at 45 degrees to represent how that side appears from above; this gives the shape of the top view.
The document discusses various topics in a disorganized manner, moving between unrelated points. It references economic factors, environmental concerns, and social issues but does not provide meaningful analysis or conclusions.
The document discusses various psychological and social factors. It examines how individual traits interact with environmental influences to impact behaviors and outcomes. Key points addressed include the interplay between personality, attitudes, social pressures, and decision-making.
The document provides instructions for drawing orthographic projections of points and lines. It defines key terms and concepts used in orthographic projections including quadrants, front view (FV), top view (TV), horizontal plane (HP), and vertical plane (VP). Examples are given of drawing the projections of a point located in different quadrants, as well as different types of lines, such as vertical, parallel, and inclined lines. Guidelines are provided for determining the FV and TV based on whether the object is above or below the HP and in front of or behind the VP. Methods for finding true lengths, angles, and orientations are also described when only FV and TV are given.
The document discusses engineering graphics and freehand sketching. It covers curves used in engineering like conics, cycloids, and involutes. It also discusses representing 3D objects through multiple views and developing visualization skills through freehand sketching. The document then provides step-by-step instructions on orthographic projections using first angle projection. It demonstrates drawing front, side, and top views from pictorial presentations. Finally, it outlines the general procedure for freehand sketching orthographic views from an isometric pictorial view.
This document provides an overview and lessons for a training course on creating a basic PowerPoint presentation. The course covers getting familiar with the PowerPoint interface, adding and formatting slides, choosing a theme, inserting images and other elements, and preparing the presentation for delivery, including previewing, printing notes and handouts, and checking spelling. It includes practice activities and self-assessment questions for each lesson.
Este documento presenta un plan de estudios básico de inglés para el período de septiembre de 2012 a febrero de 2013. El objetivo principal es codificar y decodificar mensajes orales y escritos en inglés para comunicarse de manera apropiada según los estándares internacionales. El plan incluye cinco secciones que cubren temas como datos personales, familia, salud, gastronomía, viajes y planes para el futuro. La evaluación medirá la capacidad de los estudiantes para expresarse a nivel umbral y hacer y responder pre
The document discusses ways for citizens to protect the environment through reducing waste, reusing materials, and recycling. It emphasizes that recycling is important for protecting natural resources and the planet. Specific tips include buying products with less packaging, avoiding disposable items, donating usable items, composting organic waste, and properly separating recyclables like paper, plastic, glass, and metal into the appropriate bins. The overall message is that small actions by individuals can help address issues like climate change and conserve resources for future generations.
1) The document is about a group of students who created bookmarks as their first technological process.
2) They learned how to work as a group and use the necessary tools to build the bookmarks.
3) While working, they had fun and learned a lot, and felt the work was very funny and important for learning the technological process.
A computer system is an electronic device that collects data as input, processes it, and transmits output information. It can be a computer, phone, TV, tablet, or game console. A computer system has hardware components like a CPU, motherboard, memory, storage, and peripherals. It also has software programs that enable the hardware to function and perform tasks. An operating system is the most important software that allows basic computer functions and communication between hardware and applications. Common operating systems include Windows, Mac OS, and Linux.
The document discusses the organization of activities in a workshop. It describes that there are two types of work done in workshops: analyzing problems and thinking of solutions, and manual activities. It then outlines five roles in workshop organization: the coordinator, person responsible for materials, person responsible for tools, person in charge of cleaning, and secretary. The document concludes with safety rules for working in the workshop, such as using tools properly, not rushing, and following teacher instructions.
Orthographic projections are a method of technical drawing where views of an object are projected onto planes perpendicular to the object. There are three principal planes - the horizontal plane, vertical frontal plane, and profile plane. Views are the front view projected on the vertical plane, top view on the horizontal plane, and side view on the profile plane. The document provides details on first and third angle projection methods, examples of orthographic projections of different objects, and terminology used in orthographic projections.
This presentation highlights the reasons which lead to the withdrawal of the 2002 Guidance of the FDA and the current issue with Blend Uniformity and Content Uniformity Determinations.
The document discusses the key ingredients of technology which include science, technical drawing, materials and an understanding of their properties, working techniques, and economic aspects. These ingredients are analogous to those in a recipe and must be considered when designing, manufacturing, and bringing new technologies to market. The document states that the goal is to learn about these various ingredients throughout the year.
1) Drawings provide a better understanding of the shape, size, and appearance of objects compared to verbal or written descriptions, and have become an important communication tool across many fields.
2) There are different types of drawings including nature drawings, maps, botanical drawings, portraits, and engineering drawings.
3) Orthographic projections are a type of technical drawing that projects different views of an object onto planes perpendicular to the view, with the views including a front, top, and side view.
004 301 training quality system management regulations, gmp (2)ZARRAR MEHMOOD
The document discusses Good Manufacturing Practices (GMP) regulations developed by the FDA to ensure quality in medical device manufacturing. GMP procedures help ensure consistency and quality control in production and testing. The FDA enforces GMP through inspections and can deem devices adulterated if manufactured in violation of GMP guidelines. Complying with GMP is therefore mandatory for medical device manufacturers. The presentation then goes on to discuss specific GMP guidelines and principles around defined and controlled manufacturing processes, documentation, training, record keeping, complaints handling and more.
The document discusses dimensioning standards and practices. It covers topics such as dimensioning rules, types of dimensions, dimensioning methods like chain and datum dimensioning, and how to dimension different features including holes, threads, angles, and more. Standards organizations that set engineering standards are also identified, such as ANSI, ISO, DIN, and others.
Technology has existed for as long as humans have in order to meet their basic needs like food, shelter, and clothing. Over time, as humans learned to make tools and new materials, they were able to fully meet their basic needs and attend to other needs to make their lives more comfortable. Technological development over many centuries has led to today's society.
Forces can deform objects or change their motion, and structures resist forces to prevent breaking or excessive deformation. Structures are natural or artificial and must be stable, resistant, and rigid. Stability depends on center of gravity and base. Resistance depends on material, quantity, and shape. Rigidity comes from rigid joints, triangles, and cross-bracing. Loads apply stresses like tension, compression, bending, torsion, and shear. Structures serve their purpose if stable, resistant, and rigid.
The document discusses the technological process, which consists of an ordered sequence of steps to meet a need or solve a problem. The main steps are: 1) describing and analyzing the need, 2) searching for information, 3) generating and selecting ideas, 4) executing the design, and 5) evaluating the solution. The technological process provides an organized method for applying technology to problems in a careful manner.
This document discusses various properties of materials, grouping them into physical properties, chemical properties, technological properties, and ecological properties. It provides examples of different materials and their properties related to density, opacity, magnetism, permeability, porosity, hardness, tenacity, elasticity, ductility, weldability, fusibility, thermal and electrical conductivity, acoustic conductivity, recyclability, biodegradability, and toxicity.
This document discusses dimensioning techniques for technical drawings. It covers topics such as dimension lines, types of dimensions, symbols, spacing, placement and readability. The document provides examples and exercises to illustrate key points around properly dimensioning drawings to convey all necessary information to manufacture parts as intended. Dimensioning requires understanding dimension appearance, locating features, and choice of dimensions. Mastering these fundamentals helps ensure dimensions are clear, concise and avoid conflicting interpretations.
This document provides guidance on technical drawing specifications and conventions for VCE Visual Communication Design studies. It outlines different types of technical drawings including paraline drawings like isometric and planometric, perspective drawings, orthographic drawings, and architectural drawings. It describes key techniques for these different drawing types, such as how to draw ellipses and place views in orthographic drawings. The document is intended as a resource for students to support the technical drawing components of their VCE studies and assessments.
Heart disease is a common affliction caused by stress, smoking, poor diet, and lack of exercise. It is the leading cause of death among workers. Regular brisk walking for 30 minutes per day can significantly improve heart health by lowering cholesterol and blood pressure, reducing stress, and increasing fitness. Simple stretches like knee extensions can also help relieve pain and strengthen the muscles around the knee. Making walking a daily routine can greatly strengthen the heart and overall health.
A blind boy sat with a sign asking for help, with only coins in his hat. A man changed the sign to say "Today is a beautiful day and I cannot see it", appealing to people's emotions. The hat then filled with more donations, as the new sign was more effective at garnering empathy and support. The short story shows that reframing a message can make it more persuasive.
The document provides instructions for drawing orthographic projections of points and lines. It defines key terms and concepts used in orthographic projections including quadrants, front view (FV), top view (TV), horizontal plane (HP), and vertical plane (VP). Examples are given of drawing the projections of a point located in different quadrants, as well as different types of lines, such as vertical, parallel, and inclined lines. Guidelines are provided for determining the FV and TV based on whether the object is above or below the HP and in front of or behind the VP. Methods for finding true lengths, angles, and orientations are also described when only FV and TV are given.
The document discusses engineering graphics and freehand sketching. It covers curves used in engineering like conics, cycloids, and involutes. It also discusses representing 3D objects through multiple views and developing visualization skills through freehand sketching. The document then provides step-by-step instructions on orthographic projections using first angle projection. It demonstrates drawing front, side, and top views from pictorial presentations. Finally, it outlines the general procedure for freehand sketching orthographic views from an isometric pictorial view.
This document provides an overview and lessons for a training course on creating a basic PowerPoint presentation. The course covers getting familiar with the PowerPoint interface, adding and formatting slides, choosing a theme, inserting images and other elements, and preparing the presentation for delivery, including previewing, printing notes and handouts, and checking spelling. It includes practice activities and self-assessment questions for each lesson.
Este documento presenta un plan de estudios básico de inglés para el período de septiembre de 2012 a febrero de 2013. El objetivo principal es codificar y decodificar mensajes orales y escritos en inglés para comunicarse de manera apropiada según los estándares internacionales. El plan incluye cinco secciones que cubren temas como datos personales, familia, salud, gastronomía, viajes y planes para el futuro. La evaluación medirá la capacidad de los estudiantes para expresarse a nivel umbral y hacer y responder pre
The document discusses ways for citizens to protect the environment through reducing waste, reusing materials, and recycling. It emphasizes that recycling is important for protecting natural resources and the planet. Specific tips include buying products with less packaging, avoiding disposable items, donating usable items, composting organic waste, and properly separating recyclables like paper, plastic, glass, and metal into the appropriate bins. The overall message is that small actions by individuals can help address issues like climate change and conserve resources for future generations.
1) The document is about a group of students who created bookmarks as their first technological process.
2) They learned how to work as a group and use the necessary tools to build the bookmarks.
3) While working, they had fun and learned a lot, and felt the work was very funny and important for learning the technological process.
A computer system is an electronic device that collects data as input, processes it, and transmits output information. It can be a computer, phone, TV, tablet, or game console. A computer system has hardware components like a CPU, motherboard, memory, storage, and peripherals. It also has software programs that enable the hardware to function and perform tasks. An operating system is the most important software that allows basic computer functions and communication between hardware and applications. Common operating systems include Windows, Mac OS, and Linux.
The document discusses the organization of activities in a workshop. It describes that there are two types of work done in workshops: analyzing problems and thinking of solutions, and manual activities. It then outlines five roles in workshop organization: the coordinator, person responsible for materials, person responsible for tools, person in charge of cleaning, and secretary. The document concludes with safety rules for working in the workshop, such as using tools properly, not rushing, and following teacher instructions.
Orthographic projections are a method of technical drawing where views of an object are projected onto planes perpendicular to the object. There are three principal planes - the horizontal plane, vertical frontal plane, and profile plane. Views are the front view projected on the vertical plane, top view on the horizontal plane, and side view on the profile plane. The document provides details on first and third angle projection methods, examples of orthographic projections of different objects, and terminology used in orthographic projections.
This presentation highlights the reasons which lead to the withdrawal of the 2002 Guidance of the FDA and the current issue with Blend Uniformity and Content Uniformity Determinations.
The document discusses the key ingredients of technology which include science, technical drawing, materials and an understanding of their properties, working techniques, and economic aspects. These ingredients are analogous to those in a recipe and must be considered when designing, manufacturing, and bringing new technologies to market. The document states that the goal is to learn about these various ingredients throughout the year.
1) Drawings provide a better understanding of the shape, size, and appearance of objects compared to verbal or written descriptions, and have become an important communication tool across many fields.
2) There are different types of drawings including nature drawings, maps, botanical drawings, portraits, and engineering drawings.
3) Orthographic projections are a type of technical drawing that projects different views of an object onto planes perpendicular to the view, with the views including a front, top, and side view.
004 301 training quality system management regulations, gmp (2)ZARRAR MEHMOOD
The document discusses Good Manufacturing Practices (GMP) regulations developed by the FDA to ensure quality in medical device manufacturing. GMP procedures help ensure consistency and quality control in production and testing. The FDA enforces GMP through inspections and can deem devices adulterated if manufactured in violation of GMP guidelines. Complying with GMP is therefore mandatory for medical device manufacturers. The presentation then goes on to discuss specific GMP guidelines and principles around defined and controlled manufacturing processes, documentation, training, record keeping, complaints handling and more.
The document discusses dimensioning standards and practices. It covers topics such as dimensioning rules, types of dimensions, dimensioning methods like chain and datum dimensioning, and how to dimension different features including holes, threads, angles, and more. Standards organizations that set engineering standards are also identified, such as ANSI, ISO, DIN, and others.
Technology has existed for as long as humans have in order to meet their basic needs like food, shelter, and clothing. Over time, as humans learned to make tools and new materials, they were able to fully meet their basic needs and attend to other needs to make their lives more comfortable. Technological development over many centuries has led to today's society.
Forces can deform objects or change their motion, and structures resist forces to prevent breaking or excessive deformation. Structures are natural or artificial and must be stable, resistant, and rigid. Stability depends on center of gravity and base. Resistance depends on material, quantity, and shape. Rigidity comes from rigid joints, triangles, and cross-bracing. Loads apply stresses like tension, compression, bending, torsion, and shear. Structures serve their purpose if stable, resistant, and rigid.
The document discusses the technological process, which consists of an ordered sequence of steps to meet a need or solve a problem. The main steps are: 1) describing and analyzing the need, 2) searching for information, 3) generating and selecting ideas, 4) executing the design, and 5) evaluating the solution. The technological process provides an organized method for applying technology to problems in a careful manner.
This document discusses various properties of materials, grouping them into physical properties, chemical properties, technological properties, and ecological properties. It provides examples of different materials and their properties related to density, opacity, magnetism, permeability, porosity, hardness, tenacity, elasticity, ductility, weldability, fusibility, thermal and electrical conductivity, acoustic conductivity, recyclability, biodegradability, and toxicity.
This document discusses dimensioning techniques for technical drawings. It covers topics such as dimension lines, types of dimensions, symbols, spacing, placement and readability. The document provides examples and exercises to illustrate key points around properly dimensioning drawings to convey all necessary information to manufacture parts as intended. Dimensioning requires understanding dimension appearance, locating features, and choice of dimensions. Mastering these fundamentals helps ensure dimensions are clear, concise and avoid conflicting interpretations.
This document provides guidance on technical drawing specifications and conventions for VCE Visual Communication Design studies. It outlines different types of technical drawings including paraline drawings like isometric and planometric, perspective drawings, orthographic drawings, and architectural drawings. It describes key techniques for these different drawing types, such as how to draw ellipses and place views in orthographic drawings. The document is intended as a resource for students to support the technical drawing components of their VCE studies and assessments.
Heart disease is a common affliction caused by stress, smoking, poor diet, and lack of exercise. It is the leading cause of death among workers. Regular brisk walking for 30 minutes per day can significantly improve heart health by lowering cholesterol and blood pressure, reducing stress, and increasing fitness. Simple stretches like knee extensions can also help relieve pain and strengthen the muscles around the knee. Making walking a daily routine can greatly strengthen the heart and overall health.
A blind boy sat with a sign asking for help, with only coins in his hat. A man changed the sign to say "Today is a beautiful day and I cannot see it", appealing to people's emotions. The hat then filled with more donations, as the new sign was more effective at garnering empathy and support. The short story shows that reframing a message can make it more persuasive.
The document describes scenic views and religious sites in Tibet, including numerous rivers, the glorious sunrise over Manasa Sarovar Lake, the different colors of the lake, pilgrims circling Mount Kailash and glimpses of the sacred mountain during their journey. Key locations mentioned are Manasa Sarovar Lake, Gouri Kund, and Mount Kailash, a holy site and abode of Lord Shiva located in the Himalayas.
This document contains a message from Jesus about the simplicity of faith. It discusses faith as knowing that God loves us, answers prayers, and can do more than we can imagine. Jesus uses children as an example of having simple, trusting faith. The document encourages growing one's faith through reading the Bible, prayer, and testimonies of how God has answered prayers and performed miracles in the past.
A young boy throws a brick at a businessman's new car to get his attention. When the man confronts the boy angrily, the boy explains that he did it to get help for his brother who had fallen out of his wheelchair and was too heavy for the boy to lift alone. The man helps the boy and is moved by the experience, leaving the dent in his car as a reminder to slow down and pay attention to others.
An optician shared an exercise called "20-20-20" to help reduce eye strain from prolonged computer use. The exercise involves looking at an object 20 feet away for 20 seconds every 20 minutes, blinking 20 times in a row to moisten the eyes, and walking 20 paces every 20 minutes to improve blood circulation. Sharing the exercise with friends can help care for their eyesight.
The document summarizes 124 ways that sugar can negatively impact health. It provides evidence that sugar can suppress the immune system, contribute to many diseases, and interfere with nutrient absorption and organ function. The extensive list of health effects is supported by over 100 references to scientific studies. Sugar intake is linked to issues like cancer, heart disease, digestive disorders, inflammation, and more.
The Bhagavad Gita teaches that one should not worry about things outside of their control. [1] The soul is eternal and cannot be killed. [2] Whatever has happened or will happen is for one's highest good. [3] One should dedicate themselves to God, who is the ultimate source of support and freedom from fear and sorrow.
The document is a collection of quotes from famous historical leaders on various topics like leadership, life, success, and overcoming challenges. It includes quotes from Nelson Mandela, Martin Luther King Jr., Mahatma Gandhi, Winston Churchill, Abraham Lincoln, Walt Disney, Henry Ford, Bill Gates, Larry Page, Oprah Winfrey, Charlie Chaplin, Steven Spielberg, Marlon Brando, Albert Einstein, the Wright Brothers, Thomas Edison, Mohammed Ali, Pele, Michael Jordan, Mother Teresa, and Helen Keller.
This document provides a summary of India's achievements and history across multiple fields including mathematics, science, medicine, architecture, language and philosophy. Some key points include:
- India invented the number system including the concept of zero. Several important mathematical concepts were discovered centuries before their attributed discoveries in Europe.
- Ayurveda is one of the earliest known medical systems and Susruta is considered the father of surgery. Ancient Indian texts describe advanced medical knowledge.
- Major architectural feats include some of the earliest universities and the largest granite temples.
- Languages like Sanskrit were highly developed and influenced other languages. Vedic philosophy forms the basis of Hinduism and many concepts share similarities with other ancient traditions
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.pptHenry Hollis
The History of NZ 1870-1900.
Making of a Nation.
From the NZ Wars to Liberals,
Richard Seddon, George Grey,
Social Laboratory, New Zealand,
Confiscations, Kotahitanga, Kingitanga, Parliament, Suffrage, Repudiation, Economic Change, Agriculture, Gold Mining, Timber, Flax, Sheep, Dairying,
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) CurriculumMJDuyan
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
This presentation was provided by Racquel Jemison, Ph.D., Christina MacLaughlin, Ph.D., and Paulomi Majumder. Ph.D., all of the American Chemical Society, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.
Temple of Asclepius in Thrace. Excavation resultsKrassimira Luka
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
Leveraging Generative AI to Drive Nonprofit InnovationTechSoup
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UPRAHUL
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...PECB
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
The chapter Lifelines of National Economy in Class 10 Geography focuses on the various modes of transportation and communication that play a vital role in the economic development of a country. These lifelines are crucial for the movement of goods, services, and people, thereby connecting different regions and promoting economic activities.
2. EDUTAINMENT
(Learning – Fun)
For
Technical Education
In
Engineering Drawing
By
Guru Maa Foundation (Red.)
BLB
2 GMP
3. Animated Slide Show Presentation
For ENGINEERING DRAWING
By Guru Maa Foundation
Developed By
Prof. B. L. Bhatt (Lecturer D.J.S.C.E.)
Technical Coordinator
Shri G. M. Panchal (CAD Programmer S.B.M.P.)
BLB
3 GMP
4. An APPEAL
to avoid Piracy
This Low Priced Animated CD is
developed by Guru Maa Foundation
(Regd.No.284) for the Slow Learner
Students from Remote Areas who
can’t get Expert Professor’s Guidance.
Please encourage us by buying only
Original CD. This fund will be used for
future Development in Self Learning.
BLB
4 GMP
5. -:NOTE:-
Since Power Point is a
Presentation Package, there are
chances that some of the line
conventions are not as per
ISO, but it will not affect the
explanation and understanding
of the Engineering Drawing.
BLB
5 GMP
6. TYPES OF LINE
No. Line type Illustration Thickness
1) Construction line 0.1 to 0.2 mm Very light
projector
2) Leader line 0.2 to 0.3 mm Medium dark
Extension line
Section line
3) Visible 0.4 to 0.5 mm Dark
Object line
It is used for showing visible details of the object
4) Dimension Line THICKNESS NOT MORE THEN 1MM. 0.2 to 0.3 mm Medium dark
LENGTH 3 TO 4 mm.
Special care should be taken to draw arrow heads. It should be as dark as the dimension
line. Draw two lines of the arrow heads so close that their is no need to fill it with the pencil.
generally arrow heads becomes darker due to filling it with the pencil.
5) Center line, Axis 0.1 to 0.2 mm Medium darkt
The line of
Symmetry It is usually extended beyond the out line of the object
6) Dotted Line or 0.4 to 0.5 mm Dark
Hidden line
BLB
6 GMP
7. TIPS FOR LINE CONNECTION
Correct
Incorrect
Correct
Incorrect
BLB
7 GMP
9. THEORY OF PROJECTION
Projector
F Pit
with Light rays cu
I re
light sc
L ree Picture
M n
Plane
Fig. 1 DISPLAY OF FILM
s
ay
tr
gh
Li
Picture plane
FR Source of Light
of projection ON
TV Object
IEW
L
H Fig. 2
Source of Light
at infinity L
H
Fig. 3
BLB
9 GMP
10. 4 QUADRANT THEORY
FOUR QUADRANTS
. TOP
/ V.P DIRECTION
F RP
I
Y
II
III X
H .P.
IV /
H RP
F
DIR RON
EC T
TIO
N
BLB
10 GMP
11. TOP 1st ANGLE
DIRECTION
Projection
.
V.P
1st QUADRANT
Y
H.P.
X
F
DIR RON
EC T
TIO
N BLB
11 GMP
12. 1st ANGLE PROJECTION
RIG
NE
LA HT
N TP R.P PR
OF
.P. X1
FRO ILEP
R
LO LA
NE
T ICA
V ER L.H.S.V.
F.V.
.
V.P
.
F.V
Y
X
L.H Y1
.S.
V.
T.V.
.
H.P
ARRAY OF VIEWS IN 1 ST ANGLE
T .V. NE
LA
LP
N TA X
RIZO
HO
OBSERVER BLB
12 GMP
13. 3rd ANGLE TOP
DIRECTION
Projection
H .P.
Y
X
3rd QUADRANT
F
DIR RON
. EC T
V.P TIO
N
BLB
13 GMP
14. 3rd ANGLE PROJECTION
A NE HP
PL
T AL
Z ON
RI
HO
X1
.
T.V
VP
LPP
T.V.
x Y
Y1
L.H.S.V. F.V.
S .V
. .
F.V
LE A NE
FT PL ARRAY OF VIEWS IN 3RD ANGLE
PR T
OF ON
ILE FR
R
PL
AN A LO
E T IC
V ER
X
OBSERVER BLB
14 GMP
15. Multiview Orthographic Projection
First angle Second angle Third angle Fourth angle
First angle orthographic projections : Refer figure Below:
1) The object is above H.P. and in front of V.P.
2) The plane of projection is behind the object.
3) The common line between H.P. and V.P. is known as X Y line.
4) The common line between V.P. and PP is known as X1 Y1 line.
5) All the planes are opaque and hinged to vertical plane as shown in the fig.
6) Front view shows Length and Height of the object. TOP
DIRECTION
7) Top view shows Length and Width of the object.
8) Side view shows Height and Width of the object.
.
V.P
1st QUADRANT
S.V. F.V. Y
P.
H.
X
F
DIR RON
EC T
TIO
T.V. N
BLB
15 GMP
17. O
OBSERVER
GIVEN: PICTORIAL VIEW
DRAW: FRONT VIEW, TOP VIEW, AND BLB
LEFT SIDE VIEW IN 1st ANGLE PROJ. 17 GMP
18. t1L t1R
s1
f2 t2
s2 f1 1st ANGLE PROJ.
f2 s1 s2
O OBSERVER f1
Now start drawing Second
Follow the the Hidden
Lets DrawLeft Corner to
Accordinglyand Top Faces
Front, Sidesame method of
Draw First
Fix UpperFrontFace& &Width
Mark Max. Heightclear as
Level of Front get “f2” with
Edgesof Front Face “f1”
projection to View
in
are taggedto Develop the
Level with Ortho graphic F.V. L.S.V.
begin Refereeing the
L.S.V.V.facesproject origin 45
Top
ideaView & Left Side view.
for F.of most line at the
shown and
Bottom views i.e.
layout of Diagram
Dotted line
same through 45˚Line for
“O”. t1L
F.V.,T.V.,& L.S.V.
getting T. V. & L. S. V. t2
t1R
GIVEN: PICTORIAL VIEW
T.V.
DRAW: FRONT VIEW, TOP
VIEW, & LEFT SIDE VIEW 18 BLB
GMP
19. t1L t1R
s2 f1
s1
f2 t2 3rd ANGLE PROJ.
O OBSERVER
t1L
t2
Front, Side and Top Faces
Fix Upper Right Corner to
Lets start drawing First of
Now Draw same method
are tagged theget clear
begin the to Hidden
Followwith Ortho graphic
Mark Max. Length Second
Accordingly Draw & t1R
Level of Front Face “f1” with
Edges of views View &
projectionFrontFace “f2” as
in to Develop
layoutof Front i.e. the
Level
Width faces line at origin
idea offor T. V. and project 45
T.V.
Bottom most
L.S.V. Refereeing the
Top View & Left Side view.
the same through 45˚Line
F.V.,T.V.,& L.S.V.
shown line Diagram
“O”.
Dotted
for getting F. V. & L. S. V.
s1 f2 f1
s2
GIVEN: PICTORIAL VIEW
DRAW: FRONT VIEW, TOP
VIEW, & LEFT SIDE VIEW L.S.V. BLB
F.V. 19 GMP