09 led-10 w-ceiling-round-flush
•
0 likes•40 views
The document summarizes the specifications of an LED panel light including its available frame colors, cut-out dimensions, low depth, LED power supply details, beam angle, energy savings, luminosity at different color temperatures, support for green energy as it is RoHS compliant and contains no mercury, certifications, LED properties like brightness, heat dissipation and life expectancy, operating temperature range, color accuracy, power factor, warranty details, frame diameter, input voltage range, and a note about the brightness of the future shining with LED.
Report
Share
Report
Share
Download to read offline
Recommended
10 led-8-30 w-downlights
This document provides technical specifications for LED light fixtures, including cut-out dimensions from 120-205mm, a beam angle of 80 degrees, energy savings of 70-80%, luminosity ranges from 630-2500 lumens depending on color temperature, a lifespan of 50,000 hours, an operating temperature range of -20 to 40 degrees Celsius, a color rendering index over 75, and power factor of at least 0.88. It also notes the fixtures use high power COB LEDs, are RoHS compliant without mercury, and CE certified.
08 led-58 w-rgb-mod-ceiling-sq
The document provides specifications for modular drop ceiling lights that are suitable for limited ceiling spaces. The lights have dimensions of 600x600mm, a low depth of 14mm, and include an LED power supply. They produce between 2100-3200 lumens of brightness with high color accuracy and a 50,000 hour lifespan. The lights meet energy efficiency and safety standards and have remote control capabilities along with a three year warranty.
20 led-high bay lamp high end
This document provides information about LED lighting products from Mohammed F. Al-Shahri Est., including their voltage range, beam angle, energy savings of over 50%, suggested applications for warehouses and stores, certifications for RoHS, CE, and power factor and efficiency ratings. It also lists the working temperature range, color accuracy, protection level, and available sizes from 50W to 300W with lumen outputs ranging from 4500lm to 28000lm.
19 led-striplight controller
This document advertises remote dimmer and RGB lighting modules that are RoHS compliant, CE certified, and can control lighting up to 1000 meters away. The modules support green energy and contain no mercury. They allow for remote control of brightness and color with LED lights.
19 led-power supplies
This document describes a constant voltage power supply available from Mohammed F. Al-Shahri Est. It lists 9 available output sizes ranging from 12V 48W to 12V 360W and notes the power supply has a dual voltage input range of 90-140VAC and 170-250VAC at 50 or 60Hz. It also mentions several safety and certification features including power factor correction, being RoHS compliant and CE certified, and having short circuit and thermal overload protection.
18 led-5m-strip-lights
This document provides specifications for LED light strips of different types and wattages, including SMD 3528 and SMD 5050 strips that consume between 38W to 96W per 5 meters and contain 300 to 1200 LEDs. It lists the available LED chip types, colors, operating features, and notes that the strips support green energy, are RoHS compliant, CE certified, and have a life expectancy of around 30,000 hours. Power supplies and controllers must be ordered separately.
18 led-5m-dual-strip-lights
The document describes an LED light strip that contains 1200 LEDs per 5 meter section, consuming 96 watts of power. It uses SMD 3528 LED chips and is available in various colors like warm white, cool white, blue, green, red, and yellow. The light strip has a long life expectancy of around 30,000 hours and is dimmable and compatible with LED power supplies and controllers. It operates from 12VDC and is RoHS compliant, CE certified, and supports green energy applications.
16 led-240 w-street lamp
This document provides specifications for an LED street light that operates on 100-240VAC or 277VAC power. It has a beam angle of less than 120 degrees, saves approximately 55% energy, and produces 20,400 lumens of 6000K light from 8 high brightness 30W COB LEDs. Additional features include a power factor over 0.95, efficiency over 88%, a 50,000 hour life expectancy, an operating temperature range of -20 to 50 degrees Celsius, and an IP65 rating.
Recommended
10 led-8-30 w-downlights
This document provides technical specifications for LED light fixtures, including cut-out dimensions from 120-205mm, a beam angle of 80 degrees, energy savings of 70-80%, luminosity ranges from 630-2500 lumens depending on color temperature, a lifespan of 50,000 hours, an operating temperature range of -20 to 40 degrees Celsius, a color rendering index over 75, and power factor of at least 0.88. It also notes the fixtures use high power COB LEDs, are RoHS compliant without mercury, and CE certified.
08 led-58 w-rgb-mod-ceiling-sq
The document provides specifications for modular drop ceiling lights that are suitable for limited ceiling spaces. The lights have dimensions of 600x600mm, a low depth of 14mm, and include an LED power supply. They produce between 2100-3200 lumens of brightness with high color accuracy and a 50,000 hour lifespan. The lights meet energy efficiency and safety standards and have remote control capabilities along with a three year warranty.
20 led-high bay lamp high end
This document provides information about LED lighting products from Mohammed F. Al-Shahri Est., including their voltage range, beam angle, energy savings of over 50%, suggested applications for warehouses and stores, certifications for RoHS, CE, and power factor and efficiency ratings. It also lists the working temperature range, color accuracy, protection level, and available sizes from 50W to 300W with lumen outputs ranging from 4500lm to 28000lm.
19 led-striplight controller
This document advertises remote dimmer and RGB lighting modules that are RoHS compliant, CE certified, and can control lighting up to 1000 meters away. The modules support green energy and contain no mercury. They allow for remote control of brightness and color with LED lights.
19 led-power supplies
This document describes a constant voltage power supply available from Mohammed F. Al-Shahri Est. It lists 9 available output sizes ranging from 12V 48W to 12V 360W and notes the power supply has a dual voltage input range of 90-140VAC and 170-250VAC at 50 or 60Hz. It also mentions several safety and certification features including power factor correction, being RoHS compliant and CE certified, and having short circuit and thermal overload protection.
18 led-5m-strip-lights
This document provides specifications for LED light strips of different types and wattages, including SMD 3528 and SMD 5050 strips that consume between 38W to 96W per 5 meters and contain 300 to 1200 LEDs. It lists the available LED chip types, colors, operating features, and notes that the strips support green energy, are RoHS compliant, CE certified, and have a life expectancy of around 30,000 hours. Power supplies and controllers must be ordered separately.
18 led-5m-dual-strip-lights
The document describes an LED light strip that contains 1200 LEDs per 5 meter section, consuming 96 watts of power. It uses SMD 3528 LED chips and is available in various colors like warm white, cool white, blue, green, red, and yellow. The light strip has a long life expectancy of around 30,000 hours and is dimmable and compatible with LED power supplies and controllers. It operates from 12VDC and is RoHS compliant, CE certified, and supports green energy applications.
16 led-240 w-street lamp
This document provides specifications for an LED street light that operates on 100-240VAC or 277VAC power. It has a beam angle of less than 120 degrees, saves approximately 55% energy, and produces 20,400 lumens of 6000K light from 8 high brightness 30W COB LEDs. Additional features include a power factor over 0.95, efficiency over 88%, a 50,000 hour life expectancy, an operating temperature range of -20 to 50 degrees Celsius, and an IP65 rating.
16 led-200 w-street lamp
The document describes an LED street light that has a voltage range of 100-240VAC or 277VAC, a horizontal beam angle of less than 120 degrees, energy savings of around 55%, a brightness of 17,000 lumens at a color temperature of 6000K, a lifespan of 50,000 hours, an operating temperature range of -20 to 50 degrees Celsius, an IP65 rating for protection against dust and water, and is RoHS compliant, CE certified, and contains no mercury. It is suggested for use on highways, main roads, and city streets.
16 led-160 w-street lamp
The document summarizes the specifications of an LED street light that provides energy savings of around 55% compared to traditional lights. It has a voltage range of 100-240VAC or 277VAC, a horizontal beam angle of less than 120 degrees, a luminosity of around 13,600 lumens at a color temperature of 6000K, a lifespan expectancy of over 50,000 hours, and an IP65 rating for protection against dust and water. The light supports green energy use and contains no mercury.
16 led-120 w-street lamp
This document provides specifications for an LED street light that uses 6 high-brightness COB LED chips. It has a voltage range of 100-240VAC or 277VAC, a horizontal beam angle of less than 120 degrees, and can save around 55% energy. The light produces around 10,200 lumens at a color temperature of 6000K, and has an expected lifespan of over 50,000 hours with a power factor over 0.95 and efficiency above 88%.
16 led-080 w-street lamp
This document provides specifications for an LED street light that uses 4 high-brightness COB LEDs. It has a voltage range of 100-240VAC or 277VAC, a horizontal beam angle of less than 120 degrees, and can save around 55% energy. The light produces around 6800 lumens at 6000K color temperature and has an expected life of over 50,000 hours with a power factor over 0.95 and efficiency above 88%. It is RoHS compliant, CE certified, and has an operating temperature range of -20 to 50 degrees Celsius.
13 led-20 w-flood light
This document provides technical specifications for an LED light fixture, including a beam angle of 120-150 degrees, energy savings of 60-70% compared to other lights, luminosities of 1600 lumens at 3000K and 1800 lumens at 6000K, support for green energy as it is RoHS compliant and contains no mercury, a lifespan of around 50,000 hours, an operating temperature range of -20 to 40 degrees Celsius, a color rendering index over 75, a power factor of at least 0.9, frame dimensions of 140x180mm, a wide input voltage range of 100-250VAC at 50/60Hz frequency, and a slogan about the future brightness shining with LED.
12 led-6 8-10_w-wall lamp
This document describes an LED light that can save up to 80% in energy costs. It has a color temperature of 3200K, is RoHS compliant without mercury, CE certified, and has a high power LED with a lifespan of around 50,000 hours. The light has a color rendering index over 80, power factor above 0.9, and works with an input voltage range of 100-250VAC at 50/60Hz. It has a safe product voltage of 12V.
11 led-30 w-ceiling pendent lamp
The document describes an LED light fixture that provides energy savings of up to 80% compared to traditional lighting. It has a color temperature of 3200K, contains no mercury or hazardous materials, and is RoHS and CE certified. The high-power LED light has an expected lifespan of around 50,000 hours and a color accuracy rating over 80.
11 led-18 w-ceiling pendent lamp
EPACS-MFS is an LED lighting company that offers energy efficient lights that can save up to 80% in energy costs. Their high power LED lights have a color temperature of 3200K, CRI over 80, power factor above 0.9, and a lifespan of around 50,000 hours. The lights are RoHS compliant, CE certified, and operate safely at 12V with a wide input voltage range of 100-250VAC at 50/60Hz.
10 led-45 w-shop lamp
The document describes an LED light fixture, providing its key specifications including dimensions of 220x132mm and required depth of 136mm, a beam angle of 80 degrees, energy savings of 70-80% compared to other lights, luminosity of 3650 lumens at 3000K and 3825 lumens at 6000K, support for green energy as it is RoHS compliant and contains no mercury, CE certification, a life expectancy of 50,000 hours, an operating temperature range of -20 to 40 degrees Celsius, a color rendering index over 75, a power factor of at least 0.88, and a wide input voltage range of 100-250VAC at 50/60Hz.
10 led-38 w-shop lamp
An LED light fixture provides energy savings of 70-80% compared to traditional lights, with a brightness of 3150-3200 lumens depending on color temperature, a 50,000 hour lifespan, high color accuracy and power factor, and a wide input voltage range, making it an eco-friendly and high-performance lighting option.
10 led-38 w-2-shop lamp
This document provides technical specifications for an LED light fixture, including its dimensions, lumen output at different color temperatures, energy savings compared to other lights, long life expectancy of 50,000 hours, wide voltage input range, RoHS and CE compliance, and low heat dissipation. It promotes the product as saving energy and being environmentally friendly.
10 led-30 w-shop lamp
The document describes an LED light fixture, providing its key specifications including dimensions of 220x132mm with a required depth of 136mm and a beam angle of 80 degrees. It claims the fixture saves 70-80% energy and has a luminosity of 2350 lumens at 3000K or 2500 lumens at 6000K, while being RoHS compliant, CE certified, and having a 50,000 hour life expectancy when operated from -20 to 40 degrees Celsius.
10 led-20 w-shop lamp
The document describes an LED light fixture, providing its key specifications including dimensions of 220x130mm and required depth of 90mm, a beam angle of 60/120 degrees, energy savings of 70-80% compared to other lights, luminosity of 1700Lm at 3000K and 1800Lm at 6000K, support for green energy as it is RoHS compliant and contains no mercury, CE certification, a life expectancy of 50,000 hours, an operating temperature range of -20 to +40 degrees Celsius, a Color Rendering Index over 75, a power factor of at least 0.88, frame dimensions of 230x145mm, a wide input voltage range of 100-250VAC at 50/60Hz frequency,
10 led-8-30 w-shoplamp
This document provides technical specifications for LED lights including cut-out dimensions ranging from 98-205mm, a required depth of 175mm, a beam angle of 80 degrees, energy savings of 70-80%, luminosity levels ranging from 630-2500Lm depending on color temperature, support for green energy as the lights are RoHS compliant and contain no mercury, a CE certification, a life expectancy of 50,000 hours, an operating temperature range of -20 to +40 degrees Celsius, a Color Rendering Index greater than 75, a power factor of at least 0.88, frame dimensions ranging from 108-215mm, a wide input voltage range of 100-250VAC at 50/60Hz frequencies, and a note
10 led-8-30 w-downlights
This document provides technical specifications for LED light fixtures, including cut-out dimensions from 120-205mm, a beam angle of 80 degrees, energy savings of 70-80%, luminosity ranges from 630-2500 lumens depending on color temperature, a lifespan of 50,000 hours, an operating temperature range of -20 to 40 degrees Celsius, a color rendering index over 75, and power factor of at least 0.88. It also notes the fixtures use high power COB LEDs, are RoHS compliant containing no mercury, and are CE certified.
10 led-3&5 w-spotlights
This document provides technical specifications for an LED light fixture, including dimensions of 80mm diameter and a required depth of 60mm, a beam angle of 83 degrees, energy savings of 80-90% compared to other lights, luminosity of 270-450 lumens at both 3000K and 4200K color temperatures, compliance with RoHS and CE standards, a lifespan of 50,000 hours, an operating temperature range of -20 to 50 degrees Celsius, a color rendering index over 75, a power factor of at least 0.88, a frame dimension of 90mm diameter, a wide input voltage range of 100-250VAC at 50/60Hz frequency, and a slogan about the future brightness of LED lights.
09 led-18 w-ceiling-round-flush
The document summarizes the specifications of an LED light fixture, including its small cut-out dimensions and low depth that make it suitable for drop ceilings with limited space. It provides details on the lumen output, beam angle, energy and cost savings compared to traditional lights, certifications and compliance, long life expectancy, operating temperature range, color accuracy, and 3-year warranty. The fixture uses high-brightness LEDs, supports green energy, and is available in white or silver frames.
20 led-high bay lamp
This document provides specifications for LED light fixtures sold by Mohammed F. Al-Shahri Est. The fixtures have a voltage range of 120-240V AC, beam angles of 60, 65, 135, or 150 degrees, and provide energy savings of at least 50% compared to other lights. They are suited for warehouses, showrooms, supermarkets, and shopping malls. The LED lights are RoHS compliant, mercury-free, and CE certified. They have a power factor over 0.95, efficiency over 88%, expected life of 50,000 hours, and operate from -20 to 50 degrees Celsius. Various wattage models providing different light outputs are available.
19 led-striplight controller
This document advertises remote dimmer and RGB lighting modules that are RoHS compliant, CE certified, and can control lighting up to 1000 meters away. The modules support green energy and contain no mercury. They allow for remote control of brightness and color with LED lights.
08 led-58 w-rgb-mod-ceiling-sq
The document provides specifications for modular drop ceiling lights that are suitable for limited ceiling spaces. The lights have dimensions of 600x600mm, a low depth of 14mm, and include an LED power supply. They produce between 2100-3200 lumens of brightness with high color accuracy and a 50,000 hour lifespan. The lights meet energy efficiency and safety standards and have remote control capabilities along with a three year warranty.
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
More Related Content
More from EPACS ( Electrical Power and Control System )
16 led-200 w-street lamp
The document describes an LED street light that has a voltage range of 100-240VAC or 277VAC, a horizontal beam angle of less than 120 degrees, energy savings of around 55%, a brightness of 17,000 lumens at a color temperature of 6000K, a lifespan of 50,000 hours, an operating temperature range of -20 to 50 degrees Celsius, an IP65 rating for protection against dust and water, and is RoHS compliant, CE certified, and contains no mercury. It is suggested for use on highways, main roads, and city streets.
16 led-160 w-street lamp
The document summarizes the specifications of an LED street light that provides energy savings of around 55% compared to traditional lights. It has a voltage range of 100-240VAC or 277VAC, a horizontal beam angle of less than 120 degrees, a luminosity of around 13,600 lumens at a color temperature of 6000K, a lifespan expectancy of over 50,000 hours, and an IP65 rating for protection against dust and water. The light supports green energy use and contains no mercury.
16 led-120 w-street lamp
This document provides specifications for an LED street light that uses 6 high-brightness COB LED chips. It has a voltage range of 100-240VAC or 277VAC, a horizontal beam angle of less than 120 degrees, and can save around 55% energy. The light produces around 10,200 lumens at a color temperature of 6000K, and has an expected lifespan of over 50,000 hours with a power factor over 0.95 and efficiency above 88%.
16 led-080 w-street lamp
This document provides specifications for an LED street light that uses 4 high-brightness COB LEDs. It has a voltage range of 100-240VAC or 277VAC, a horizontal beam angle of less than 120 degrees, and can save around 55% energy. The light produces around 6800 lumens at 6000K color temperature and has an expected life of over 50,000 hours with a power factor over 0.95 and efficiency above 88%. It is RoHS compliant, CE certified, and has an operating temperature range of -20 to 50 degrees Celsius.
13 led-20 w-flood light
This document provides technical specifications for an LED light fixture, including a beam angle of 120-150 degrees, energy savings of 60-70% compared to other lights, luminosities of 1600 lumens at 3000K and 1800 lumens at 6000K, support for green energy as it is RoHS compliant and contains no mercury, a lifespan of around 50,000 hours, an operating temperature range of -20 to 40 degrees Celsius, a color rendering index over 75, a power factor of at least 0.9, frame dimensions of 140x180mm, a wide input voltage range of 100-250VAC at 50/60Hz frequency, and a slogan about the future brightness shining with LED.
12 led-6 8-10_w-wall lamp
This document describes an LED light that can save up to 80% in energy costs. It has a color temperature of 3200K, is RoHS compliant without mercury, CE certified, and has a high power LED with a lifespan of around 50,000 hours. The light has a color rendering index over 80, power factor above 0.9, and works with an input voltage range of 100-250VAC at 50/60Hz. It has a safe product voltage of 12V.
11 led-30 w-ceiling pendent lamp
The document describes an LED light fixture that provides energy savings of up to 80% compared to traditional lighting. It has a color temperature of 3200K, contains no mercury or hazardous materials, and is RoHS and CE certified. The high-power LED light has an expected lifespan of around 50,000 hours and a color accuracy rating over 80.
11 led-18 w-ceiling pendent lamp
EPACS-MFS is an LED lighting company that offers energy efficient lights that can save up to 80% in energy costs. Their high power LED lights have a color temperature of 3200K, CRI over 80, power factor above 0.9, and a lifespan of around 50,000 hours. The lights are RoHS compliant, CE certified, and operate safely at 12V with a wide input voltage range of 100-250VAC at 50/60Hz.
10 led-45 w-shop lamp
The document describes an LED light fixture, providing its key specifications including dimensions of 220x132mm and required depth of 136mm, a beam angle of 80 degrees, energy savings of 70-80% compared to other lights, luminosity of 3650 lumens at 3000K and 3825 lumens at 6000K, support for green energy as it is RoHS compliant and contains no mercury, CE certification, a life expectancy of 50,000 hours, an operating temperature range of -20 to 40 degrees Celsius, a color rendering index over 75, a power factor of at least 0.88, and a wide input voltage range of 100-250VAC at 50/60Hz.
10 led-38 w-shop lamp
An LED light fixture provides energy savings of 70-80% compared to traditional lights, with a brightness of 3150-3200 lumens depending on color temperature, a 50,000 hour lifespan, high color accuracy and power factor, and a wide input voltage range, making it an eco-friendly and high-performance lighting option.
10 led-38 w-2-shop lamp
This document provides technical specifications for an LED light fixture, including its dimensions, lumen output at different color temperatures, energy savings compared to other lights, long life expectancy of 50,000 hours, wide voltage input range, RoHS and CE compliance, and low heat dissipation. It promotes the product as saving energy and being environmentally friendly.
10 led-30 w-shop lamp
The document describes an LED light fixture, providing its key specifications including dimensions of 220x132mm with a required depth of 136mm and a beam angle of 80 degrees. It claims the fixture saves 70-80% energy and has a luminosity of 2350 lumens at 3000K or 2500 lumens at 6000K, while being RoHS compliant, CE certified, and having a 50,000 hour life expectancy when operated from -20 to 40 degrees Celsius.
10 led-20 w-shop lamp
The document describes an LED light fixture, providing its key specifications including dimensions of 220x130mm and required depth of 90mm, a beam angle of 60/120 degrees, energy savings of 70-80% compared to other lights, luminosity of 1700Lm at 3000K and 1800Lm at 6000K, support for green energy as it is RoHS compliant and contains no mercury, CE certification, a life expectancy of 50,000 hours, an operating temperature range of -20 to +40 degrees Celsius, a Color Rendering Index over 75, a power factor of at least 0.88, frame dimensions of 230x145mm, a wide input voltage range of 100-250VAC at 50/60Hz frequency,
10 led-8-30 w-shoplamp
This document provides technical specifications for LED lights including cut-out dimensions ranging from 98-205mm, a required depth of 175mm, a beam angle of 80 degrees, energy savings of 70-80%, luminosity levels ranging from 630-2500Lm depending on color temperature, support for green energy as the lights are RoHS compliant and contain no mercury, a CE certification, a life expectancy of 50,000 hours, an operating temperature range of -20 to +40 degrees Celsius, a Color Rendering Index greater than 75, a power factor of at least 0.88, frame dimensions ranging from 108-215mm, a wide input voltage range of 100-250VAC at 50/60Hz frequencies, and a note
10 led-8-30 w-downlights
This document provides technical specifications for LED light fixtures, including cut-out dimensions from 120-205mm, a beam angle of 80 degrees, energy savings of 70-80%, luminosity ranges from 630-2500 lumens depending on color temperature, a lifespan of 50,000 hours, an operating temperature range of -20 to 40 degrees Celsius, a color rendering index over 75, and power factor of at least 0.88. It also notes the fixtures use high power COB LEDs, are RoHS compliant containing no mercury, and are CE certified.
10 led-3&5 w-spotlights
This document provides technical specifications for an LED light fixture, including dimensions of 80mm diameter and a required depth of 60mm, a beam angle of 83 degrees, energy savings of 80-90% compared to other lights, luminosity of 270-450 lumens at both 3000K and 4200K color temperatures, compliance with RoHS and CE standards, a lifespan of 50,000 hours, an operating temperature range of -20 to 50 degrees Celsius, a color rendering index over 75, a power factor of at least 0.88, a frame dimension of 90mm diameter, a wide input voltage range of 100-250VAC at 50/60Hz frequency, and a slogan about the future brightness of LED lights.
09 led-18 w-ceiling-round-flush
The document summarizes the specifications of an LED light fixture, including its small cut-out dimensions and low depth that make it suitable for drop ceilings with limited space. It provides details on the lumen output, beam angle, energy and cost savings compared to traditional lights, certifications and compliance, long life expectancy, operating temperature range, color accuracy, and 3-year warranty. The fixture uses high-brightness LEDs, supports green energy, and is available in white or silver frames.
20 led-high bay lamp
This document provides specifications for LED light fixtures sold by Mohammed F. Al-Shahri Est. The fixtures have a voltage range of 120-240V AC, beam angles of 60, 65, 135, or 150 degrees, and provide energy savings of at least 50% compared to other lights. They are suited for warehouses, showrooms, supermarkets, and shopping malls. The LED lights are RoHS compliant, mercury-free, and CE certified. They have a power factor over 0.95, efficiency over 88%, expected life of 50,000 hours, and operate from -20 to 50 degrees Celsius. Various wattage models providing different light outputs are available.
19 led-striplight controller
This document advertises remote dimmer and RGB lighting modules that are RoHS compliant, CE certified, and can control lighting up to 1000 meters away. The modules support green energy and contain no mercury. They allow for remote control of brightness and color with LED lights.
08 led-58 w-rgb-mod-ceiling-sq
The document provides specifications for modular drop ceiling lights that are suitable for limited ceiling spaces. The lights have dimensions of 600x600mm, a low depth of 14mm, and include an LED power supply. They produce between 2100-3200 lumens of brightness with high color accuracy and a 50,000 hour lifespan. The lights meet energy efficiency and safety standards and have remote control capabilities along with a three year warranty.
More from EPACS ( Electrical Power and Control System ) (20)
Recently uploaded
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Kinematics 11th jpp- 01. ( Solved ) unacademy namo kaul on 14th may...
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
Recently uploaded (20)
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024)
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
09 led-10 w-ceiling-round-flush
- 1. www.epacs-mfs.com technical@epacs-mfs.com MOHAMMED F. AL-SHAHRI EST. ﺍﻟﺘﺠﺎﺭﻳﺔ ﺍﻟﺸﻬﺮﻱ ﻓﺘﺤﻲ ﻣﺤﻤﺪ ﻣﺆﺳﺴﺔ Available Frame Colours : White, Silver, Black & Gold Cut-out dimensions Ø 162 mm Low depth (16 mm) LED Power Supply (28 mm) Suitable for drop ceilings with limited space. Beam Angle < 110° ENERGY SAVING ≈ 80~90% LUMINOSITY: @3000K≈700Lm @6000K≈800Lm SUPPORT GREEN ENERGY ! RoHS compliant contains no Mercury CE Certified High Brightness LED Low Heat Dissipation LIFE EXPECTANCE ≥50'000 Hours Operating Temperature Range -20...+40°C Colour Accuracy (Colour Rendering Index CRI) >85 Power Factor ≥ 0.95 Warranty: 3 Years Frame diameter 179 mm Wide Input Voltage Range 100~250VAC 50/60 Hz The Future Brightness shines with LED