The document provides specifications for an inductive sensor model NJ40+U10+E2. The sensor has a rated operating distance of 40 mm, is not embeddable, has a PNP NO output, and is IP68 rated. It has operating voltage of 10-60V, switching frequency up to 100Hz, voltage drop less than 2.8V, and operating current up to 200mA. The sensor is UL, CSA, and CCC approved.

1. Inductive sensor NJ40+U10+E2
Dimensions
11
128 16
67,5
50 LED(s)
S
30
55
Model Number
5,5
NJ40+U10+E2 56 60
Features
• Comfort series
• 40 mm not embeddable
• With cable gland for cable diameters
Technical Data
from 7 to 10.5 mm (extendable with dif- General specifications
ferent gasket) Switching element function PNP NO
Rated operating distance sn 40 mm
Installation not embeddable
Connection Output polarity DC
Assured operating distance sa 0 ... 32.4 mm
Reduction factor rAl 0.5
Reduction factor rCu 0.45
1 Reduction factor r304 0.8
L+
4 Nominal ratings
Operating voltage UB 10 ... 60 V
3 Switching frequency f 0 ... 100 Hz
L- Hysteresis H 1 ... 10 typ. 5 %
Reverse polarity protected reverse polarity protected
Short-circuit protection pulsing
Voltage drop Ud ≤ 2.8 V
Operating current IL 0 ... 200 mA
Off-state current Ir 0 ... 0.5 mA typ. 0.01 mA
No-load supply current I0 ≤ 10 mA
Operating voltage display LED, green
Accessories Indication of the switching state LED, yellow
Ambient conditions
V1-M20-80 Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Receptacles, M12/M20; plastic version Storage temperature -25 ... 85 °C (-13 ... 185 °F)
V1-W Mechanical specifications
4-pin, M12 female field-attachable connector Connection type screw terminals
V1-G Core cross-section up to 2.5 mm2
4-pin, M12 female field-attachable connector Housing material PBT
MHW 01 Sensing face PBT
Modular mounting bracket Protection degree IP68
Compliance with standards and directives
Standard conformity
Standards EN 60947-5-2:2007
IEC 60947-5-2:2007
Date of issue: 2012-02-03 087418_eng.xml
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval Certified by China Compulsory Certification (CCC)
Release date: 2010-11-21 10:51
Subject to modifications without notice Copyright Pepperl+Fuchs
Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0001
fa-info@us.pepperl-fuchs.com
Germany: +49 621 776-4411
fa-info@pepperl-fuchs.com
Singapore: +65 6779 9091
fa-info@sg.pepperl-fuchs.com
1