07 release notes for esrgsr 3.2
•
0 likes•162 views
The release notes for ESRGSR 3.2 include: 1) Implementation of a new standard for calculating the total weight, lateral forces, impulsive and convective masses of liquid retaining structures for both empty and full tank conditions. 2) Changes made to grid values for slab beam type tanks. 3) Changes made to column editing for cylindrical type tanks. 4) Modification to the minimum steel requirements for flat slab detailing.
Report
Share
Report
Share
Download to read offline
Recommended
1893
This document is the Indian Standard for earthquake resistant design of structures. It provides guidelines for seismic zoning of India, outlines the revisions made in this fourth version, and lists the committee members involved in developing the standard. The standard aims to ensure structures can withstand earthquakes without structural damage or total collapse. It covers design of buildings, bridges, dams and other structures.
02 release notes 3.0.5
The release notes summarize new features for ESRGSR 3.0.5, including introducing flat slab designs for cylindrical tanks, reformatted flat slab reports, rectangular or circular columns for flat slabs, inclusion of hydrodynamic pressures in conical tanks, updated earthquake loads, addition of catwalks, grid line setting options, shaft supports for cylindrical tanks, upward seismic forces in uplift checks for GSR, fixes to errors in GSR reports, and inclusion of demo examples.
Lecture01 design of concrete deck slabs ( Highway Engineering )
This document discusses the design of deck slabs for bridges. It explains how truck loads are distributed across multiple stringers below the deck through load transfer mechanisms like the deck material, spacing of stringers and secondary members, and their relative stiffnesses. While load distribution can be calculated precisely, codes like AASHTO simplify this using distribution factors based on the deck type and stringer spacing. The document also mentions design considerations for reinforced concrete deck slabs, including drainage features and corrosion protection methods.
Design project
1) This document describes the design of a residential building located in Sirumalai, Dindigul district. It is a G+2 storied building located in a congested area without setbacks.
2) The methodology section outlines the process of drawing plans, locating columns and beams, applying dimensions, calculating loads, analyzing shear and bending moments, identifying critical structural elements, and designing the slab, beams, columns, and footings.
3) Key aspects of the design include the load calculations, analysis of the critical frame, design of the slab, beams, columns, and edge and corner footings. Reinforcement is designed according to code provisions.
Math cad embedded footing - combined (jcb-edited)
This document describes the properties and characteristics of a compressor, embedded footing foundation, and soil. It then determines parameters needed to calculate the foundation's stiffness and damping for vertical, horizontal, rocking, and torsional motion. Stiffness and damping coefficients are derived for the embedded footing considering interaction with the soil.
1893 1
This document is the foreword for the Indian Standard Criteria for Earthquake Resistant Design of Structures Part 1: General Provisions and Buildings. It provides the following key details:
1) This standard provides guidelines for earthquake-resistant design of structures in India, where several regions experience strong earthquakes. Previous revisions in 1970, 1975, and 1984 updated the standard based on new seismic data and experience.
2) The current revision splits the standard into 5 parts covering different structure types. Part 1 contains general provisions and guidelines specific to buildings.
3) Major changes in the current revision include revising seismic zone maps and factors, specifying response spectra for different soil types, revising equations for building
Ch3 pilefoundations
This document discusses different types of piles and their structural characteristics, including steel piles, concrete piles, timber piles, and composite piles. It describes methods of estimating pile length and capacity, including point bearing and friction piles. Equations are provided for estimating the ultimate load-carrying capacity of a pile from its point bearing capacity and frictional resistance. Methods are presented for calculating the point bearing capacity using approaches by Meyerhof, Vesic, and Janbu. The document also discusses estimating the frictional resistance of piles in sand and clay, including the lambda method for clay.
Skyper (Frankfurt) piled raft foundation using ELPLA
This document summarizes a case study of the Skyper piled raft foundation in Frankfurt, Germany. The 154m high-rise building is supported by a 3.5m thick raft foundation reinforced with 46 bored piles arranged in two rings. Extensive studies were conducted to analyze the design using different calculation methods. Nonlinear analyses of the piled raft were performed in ELPLA using various load-settlement relations and considering the raft rigid or elastic. Results from ELPLA matched well with measurements and other analytical solutions, demonstrating its effectiveness in rapidly analyzing large piled raft problems.
Recommended
1893
This document is the Indian Standard for earthquake resistant design of structures. It provides guidelines for seismic zoning of India, outlines the revisions made in this fourth version, and lists the committee members involved in developing the standard. The standard aims to ensure structures can withstand earthquakes without structural damage or total collapse. It covers design of buildings, bridges, dams and other structures.
02 release notes 3.0.5
The release notes summarize new features for ESRGSR 3.0.5, including introducing flat slab designs for cylindrical tanks, reformatted flat slab reports, rectangular or circular columns for flat slabs, inclusion of hydrodynamic pressures in conical tanks, updated earthquake loads, addition of catwalks, grid line setting options, shaft supports for cylindrical tanks, upward seismic forces in uplift checks for GSR, fixes to errors in GSR reports, and inclusion of demo examples.
Lecture01 design of concrete deck slabs ( Highway Engineering )
This document discusses the design of deck slabs for bridges. It explains how truck loads are distributed across multiple stringers below the deck through load transfer mechanisms like the deck material, spacing of stringers and secondary members, and their relative stiffnesses. While load distribution can be calculated precisely, codes like AASHTO simplify this using distribution factors based on the deck type and stringer spacing. The document also mentions design considerations for reinforced concrete deck slabs, including drainage features and corrosion protection methods.
Design project
1) This document describes the design of a residential building located in Sirumalai, Dindigul district. It is a G+2 storied building located in a congested area without setbacks.
2) The methodology section outlines the process of drawing plans, locating columns and beams, applying dimensions, calculating loads, analyzing shear and bending moments, identifying critical structural elements, and designing the slab, beams, columns, and footings.
3) Key aspects of the design include the load calculations, analysis of the critical frame, design of the slab, beams, columns, and edge and corner footings. Reinforcement is designed according to code provisions.
Math cad embedded footing - combined (jcb-edited)
This document describes the properties and characteristics of a compressor, embedded footing foundation, and soil. It then determines parameters needed to calculate the foundation's stiffness and damping for vertical, horizontal, rocking, and torsional motion. Stiffness and damping coefficients are derived for the embedded footing considering interaction with the soil.
1893 1
This document is the foreword for the Indian Standard Criteria for Earthquake Resistant Design of Structures Part 1: General Provisions and Buildings. It provides the following key details:
1) This standard provides guidelines for earthquake-resistant design of structures in India, where several regions experience strong earthquakes. Previous revisions in 1970, 1975, and 1984 updated the standard based on new seismic data and experience.
2) The current revision splits the standard into 5 parts covering different structure types. Part 1 contains general provisions and guidelines specific to buildings.
3) Major changes in the current revision include revising seismic zone maps and factors, specifying response spectra for different soil types, revising equations for building
Ch3 pilefoundations
This document discusses different types of piles and their structural characteristics, including steel piles, concrete piles, timber piles, and composite piles. It describes methods of estimating pile length and capacity, including point bearing and friction piles. Equations are provided for estimating the ultimate load-carrying capacity of a pile from its point bearing capacity and frictional resistance. Methods are presented for calculating the point bearing capacity using approaches by Meyerhof, Vesic, and Janbu. The document also discusses estimating the frictional resistance of piles in sand and clay, including the lambda method for clay.
Skyper (Frankfurt) piled raft foundation using ELPLA
This document summarizes a case study of the Skyper piled raft foundation in Frankfurt, Germany. The 154m high-rise building is supported by a 3.5m thick raft foundation reinforced with 46 bored piles arranged in two rings. Extensive studies were conducted to analyze the design using different calculation methods. Nonlinear analyses of the piled raft were performed in ELPLA using various load-settlement relations and considering the raft rigid or elastic. Results from ELPLA matched well with measurements and other analytical solutions, demonstrating its effectiveness in rapidly analyzing large piled raft problems.
Design of Well Foundation for Bridge
This document summarizes the design of a well foundation for a bridge pier. It describes different types of caisson foundations, including open, box, and pneumatic caissons. It then provides details of a specific well foundation problem, including load values and soil properties. The solution involves checking the stability of the well foundation under the given loads based on four elastic state conditions and two ultimate state conditions from IRC code recommendations. The calculations show that all conditions are satisfied, indicating the well foundation design is safe and stable.
ANALYSIS AND DESIGN OF RESIDENTIAL TOWER BY DYNAMIC ANALYSIS USING RESPONSE S...
This Project Named As “Analysis And Design Of Residential Tower (2basemetns+Stilt+31 Upper Floors)By Dynamic Analysis
Using Response Spectrum Method” Involves The Analysis And Design Of Residential Tower 3-D Frames Of Uniform
Floor heights for typical floors using very popular software tool ETABS 9.7.2.
The main thesis of this Project is to achieve the following:
1).To arrive at minimum number of modes required to get modal mass participating ratio more than 90% by dynamic
analysis using Response Spectrum Method.
2). To limit the lateral deflection at the top of the tower less than H/250(Where H = Height of the tower till terrace) for
seismic load.
3). To limit the Inter Storey Deflection(Storey Drift) in any storey due to the minimum specified design lateral force,
with factor of 1.0 less than 0.004 times the storey height.
Lecture24
This document discusses retaining walls and their design. It covers gravity walls, cantilever walls, and mechanically stabilized earth walls. For design, lateral earth pressure theories are applied to determine forces on the wall. Stability is then checked by calculating factors of safety against overturning, sliding, and bearing capacity failure. Design proportions are provided for initial stability checks of wall components like the stem and base slab.
Ch8 retaining-walls
This chapter discusses the design and analysis of retaining walls. It begins with an introduction to retaining walls, describing what they are used for and common types. It then discusses the types of retaining walls in more detail, including gravity, cantilever, counterfort, sheet pile, and others. The chapter covers design considerations such as definitions of wall parts, tentative dimensions for common wall types, and forces acting on walls such as earth pressures. It concludes with a discussion of stability considerations for external stability checks like overturning, sliding, bearing capacity, settlement, and rotational failure.
1893 1
This document is the Indian Standard Criteria for Earthquake Resistant Design of Structures, Part 1: General Provisions and Buildings (Fifth Revision). It summarizes the changes made in this fifth revision, including revising the seismic zone map to have four zones instead of five, changing the seismic zone factor values, specifying response spectra for different soil types, revising the formula for estimating building natural period, adopting response reduction factors, and revising other design provisions. The purpose is to incorporate latest research in earthquake-resistant design and experience from past earthquakes into the standard.
Ch1 introduction
This document defines foundations and foundation engineering. It discusses shallow and deep foundations. Shallow foundations include spread, combined, wall/strip, and mat foundations. Deep foundations include piles and piers. It describes factors in foundation design such as ultimate bearing capacity, settlement, and differential settlement. Footing failures by shear, tension, or bearing capacity are addressed. Examples of isolated, combined, and wall footings are provided along with factors in selecting the appropriate foundation type.
Ay 2020 2021 fe supply key
1. Soil investigations are conducted to obtain information useful for planning, designing and executing construction projects. This includes determining soil properties, groundwater levels, suitable foundation types and depths, bearing capacity, settlements, and lateral earth pressures.
2. Standard penetration tests are used to determine soil properties like relative density and strength. The test involves driving a split spoon sampler into the soil using a hammer and measuring the blow counts. Corrections are made for dilatancy and overburden pressure.
3. Piles can be classified based on material, load transfer method, construction method, use, and soil displacement. Components of a well foundation include the cutting edge, well curb, stining, bottom plug, sand fill
2018 2019 a26 a3 fe see qp
This document is the question paper for the Foundation Engineering exam at BVRAJU Institute of Technology. It contains two parts - Part A with 10 short answer questions worth 2 marks each, and Part B with 5 long answer questions worth 10 marks each. Candidates must answer all questions in Part A and any 5 questions from Part B, with one question from each unit. The questions cover various topics in foundation engineering, including soil exploration techniques, bearing capacity theory, pile foundations, well foundations, retaining walls, and slope stability analysis.
05 chapter 6 mat foundations
This document provides an overview of mat foundations. It discusses common types of mat foundations including flat plate, flat plate thickened under columns, beams and slab, and slab with basement walls. It describes how to calculate the bearing capacity of mat foundations and differential settlement. Methods for structural design of mat foundations are presented, including the conventional rigid method and approximate flexible method. Examples are provided to illustrate how to design combined footings, calculate bearing capacity, and structurally design mat foundations.
Ay 2020 2021 fe supply qp
This document contains exam questions for a Foundation Engineering course. It includes 8 questions covering various topics:
1) Soil exploration procedures and obtaining chunk samples.
2) Conducting standard penetration tests and applying correction factors.
3) Static pile bearing capacity methods and classifications of piles.
4) Calculating allowable loads on a square footing using Terzaghi's theory.
5) Components of a well foundation.
6) Shapes of well foundations and rectifying tilts and shifts.
7) Types of retaining walls and stability analysis.
8) Finding the maximum unsupported height of a vertical clayey soil cut using stability number calculations.
Types of loads
Which are the types of loads and how they affected on the building are explained in details in this PPT.Drop the comment for any enquiry or questions.
Extradosed Bridges – Assessment of seismic damage using Ground Acceleration a...
Forced vibration of structure for given Earthquake time history is governed by peak acceleration. For
cable stayed structures such as Extradosed cable stayed bridge it is difficult to predict dynamic response using
usual methods of dynamic analysis as applied to some other bridge structures like response spectrum analysis,
accurate analysis like time history analysis is time consuming and has time and cost effects. Nonlinearities can
only be considered in time history analysis. The proposed method correlates the peak ground acceleration
(PGA) and earthquake deformation ratio (EDR) which can be used for simplified dynamic analysis and can
prove handy tool for structural engineers to know earthquake related serviceability without much complicated
analysis at initial stages. This ratio can be used to present seismic damage indices. The method is proposed
considers Extradosed bridge for example.
Offshore engg
Monopiles, Monopiles Virtual Model, Monopiles installation Steps, Software & Numerical Model, Conclusion & further Challenges
Maglev Train
The document describes the design of a model maglev train using superconductors. Key points:
1) The student prepared YBCO superconductor pellets and studied their properties, including critical temperature measurement showing a transition at 91K.
2) X-ray diffraction analysis showed the sample had the expected crystal structure but with mixed phases and oxygen deficiency, resulting in weaker than expected levitation forces.
3) A magnetic track design using a Halbach array was proposed to guide the maglev vehicle.
4) A preliminary vehicle design was presented to carry YBCO pellets in liquid nitrogen, but levitation forces were too weak to lift the prototype as planned.
Linear Dynamic Analysis and Seismic Evaluation of RC Building
The document summarizes linear dynamic analysis and seismic evaluation of a 10-story reinforced concrete model structure tested on a shake table in Japan. Key aspects include:
1) The structure was modeled in SAP2000 and consisted of special moment resisting frames (SMRFs) in the long direction and reinforced concrete shear walls in the short direction.
2) Response spectrum analysis was performed in SAP2000 using design spectra from the test site in Japan. The fundamental period of the structure was found to be 0.538 seconds in the short direction and 0.947 seconds in the long direction.
3) Capacities of critical members were calculated using ACI 318 and compared to demands from SAP2000 to check
08 release notes esrgsr 3.3
The document introduces a new type of tank with a dome center and slab beam periphery. It provides DXF output files for different tank designs that can now be opened in AutoCAD without loading additional files, including Intze, conical, cylindrical, rectangular, cylindrical GSR and rectangular GSR tank designs. Modifications were also made to allow user-defined pile design capacity and fix issues with editing seismic and wind load parameters.
05 release notes 3.0.8
New pile foundation types have been added including bored and driven cast-in-situ and precast piles, and piles can now be designed as friction, end bearing, or both. Different concrete grades can be assigned for column design, modifications were made to staircases in cylindrical ESRs, predefined capacity calculation was added for Intze tanks, and several bugs were fixed regarding column properties, floor name display, BRB depth in Intze tanks, and a wall as beam feature for cylindrical tanks.
04 release notes 3.0.7
The release notes describe modifications made to the detailing of reinforcement in various types of tanks in ESRGSR 3.0.7, including bottom ring beams, Intze tanks, conical tanks, cylindrical and rectangular ESR tanks, cylindrical and rectangular GSR tanks, and slab beam tanks. The release also includes demo examples in a new Examples folder on the accompanying CD.
03 release notes 3.0.6
The release notes describe modifications made to the design and reinforcement detailing of various tank components in ESRGSR 3.0.6, including the bottom ring beam, Intze tanks, conical tanks, cylindrical and rectangular ESR tanks, and cylindrical and rectangular GSR tanks. The update also includes demo examples on the CD in a new Examples folder.
02 release notes 3.0.5
The release notes summarize new features for ESRGSR 3.0.5, including introducing flat slab designs for cylindrical tanks, adding rectangular or circular column options for flat slabs, including hydrodynamic pressures for conical tanks, incorporating earthquake loads per IS 1893:2002, allowing for catwalks along tank perimeters, and fixing various bugs in reports and calculations.
01 release note 3.1.0
This release note describes updates made in version 3.1.0, including fixing issues with initializing data generation, saving dead storage values, including wall load in bottom beam calculations, completing dynamic analysis reports, and solving problems with abnormal program termination when opening or reopening files in different modules, showing improper reinforcement parameters, performing foundation design, and applying wind load after dynamic analysis.
06 release notes 3.0.9
This release notes document summarizes updates made in version 3.0.9 of the ESRGSR software. The updates include: fixing a bug in wall thickness design for rectangular tanks with flat slabs; resolving an issue where cylindrical tank height was incorrectly replaced by design height in container properties; and solving an error that occurred in cylindrical tanks with top slab beams due to a small grid size.
More Related Content
What's hot
Design of Well Foundation for Bridge
This document summarizes the design of a well foundation for a bridge pier. It describes different types of caisson foundations, including open, box, and pneumatic caissons. It then provides details of a specific well foundation problem, including load values and soil properties. The solution involves checking the stability of the well foundation under the given loads based on four elastic state conditions and two ultimate state conditions from IRC code recommendations. The calculations show that all conditions are satisfied, indicating the well foundation design is safe and stable.
ANALYSIS AND DESIGN OF RESIDENTIAL TOWER BY DYNAMIC ANALYSIS USING RESPONSE S...
This Project Named As “Analysis And Design Of Residential Tower (2basemetns+Stilt+31 Upper Floors)By Dynamic Analysis
Using Response Spectrum Method” Involves The Analysis And Design Of Residential Tower 3-D Frames Of Uniform
Floor heights for typical floors using very popular software tool ETABS 9.7.2.
The main thesis of this Project is to achieve the following:
1).To arrive at minimum number of modes required to get modal mass participating ratio more than 90% by dynamic
analysis using Response Spectrum Method.
2). To limit the lateral deflection at the top of the tower less than H/250(Where H = Height of the tower till terrace) for
seismic load.
3). To limit the Inter Storey Deflection(Storey Drift) in any storey due to the minimum specified design lateral force,
with factor of 1.0 less than 0.004 times the storey height.
Lecture24
This document discusses retaining walls and their design. It covers gravity walls, cantilever walls, and mechanically stabilized earth walls. For design, lateral earth pressure theories are applied to determine forces on the wall. Stability is then checked by calculating factors of safety against overturning, sliding, and bearing capacity failure. Design proportions are provided for initial stability checks of wall components like the stem and base slab.
Ch8 retaining-walls
This chapter discusses the design and analysis of retaining walls. It begins with an introduction to retaining walls, describing what they are used for and common types. It then discusses the types of retaining walls in more detail, including gravity, cantilever, counterfort, sheet pile, and others. The chapter covers design considerations such as definitions of wall parts, tentative dimensions for common wall types, and forces acting on walls such as earth pressures. It concludes with a discussion of stability considerations for external stability checks like overturning, sliding, bearing capacity, settlement, and rotational failure.
1893 1
This document is the Indian Standard Criteria for Earthquake Resistant Design of Structures, Part 1: General Provisions and Buildings (Fifth Revision). It summarizes the changes made in this fifth revision, including revising the seismic zone map to have four zones instead of five, changing the seismic zone factor values, specifying response spectra for different soil types, revising the formula for estimating building natural period, adopting response reduction factors, and revising other design provisions. The purpose is to incorporate latest research in earthquake-resistant design and experience from past earthquakes into the standard.
Ch1 introduction
This document defines foundations and foundation engineering. It discusses shallow and deep foundations. Shallow foundations include spread, combined, wall/strip, and mat foundations. Deep foundations include piles and piers. It describes factors in foundation design such as ultimate bearing capacity, settlement, and differential settlement. Footing failures by shear, tension, or bearing capacity are addressed. Examples of isolated, combined, and wall footings are provided along with factors in selecting the appropriate foundation type.
Ay 2020 2021 fe supply key
1. Soil investigations are conducted to obtain information useful for planning, designing and executing construction projects. This includes determining soil properties, groundwater levels, suitable foundation types and depths, bearing capacity, settlements, and lateral earth pressures.
2. Standard penetration tests are used to determine soil properties like relative density and strength. The test involves driving a split spoon sampler into the soil using a hammer and measuring the blow counts. Corrections are made for dilatancy and overburden pressure.
3. Piles can be classified based on material, load transfer method, construction method, use, and soil displacement. Components of a well foundation include the cutting edge, well curb, stining, bottom plug, sand fill
2018 2019 a26 a3 fe see qp
This document is the question paper for the Foundation Engineering exam at BVRAJU Institute of Technology. It contains two parts - Part A with 10 short answer questions worth 2 marks each, and Part B with 5 long answer questions worth 10 marks each. Candidates must answer all questions in Part A and any 5 questions from Part B, with one question from each unit. The questions cover various topics in foundation engineering, including soil exploration techniques, bearing capacity theory, pile foundations, well foundations, retaining walls, and slope stability analysis.
05 chapter 6 mat foundations
This document provides an overview of mat foundations. It discusses common types of mat foundations including flat plate, flat plate thickened under columns, beams and slab, and slab with basement walls. It describes how to calculate the bearing capacity of mat foundations and differential settlement. Methods for structural design of mat foundations are presented, including the conventional rigid method and approximate flexible method. Examples are provided to illustrate how to design combined footings, calculate bearing capacity, and structurally design mat foundations.
Ay 2020 2021 fe supply qp
This document contains exam questions for a Foundation Engineering course. It includes 8 questions covering various topics:
1) Soil exploration procedures and obtaining chunk samples.
2) Conducting standard penetration tests and applying correction factors.
3) Static pile bearing capacity methods and classifications of piles.
4) Calculating allowable loads on a square footing using Terzaghi's theory.
5) Components of a well foundation.
6) Shapes of well foundations and rectifying tilts and shifts.
7) Types of retaining walls and stability analysis.
8) Finding the maximum unsupported height of a vertical clayey soil cut using stability number calculations.
Types of loads
Which are the types of loads and how they affected on the building are explained in details in this PPT.Drop the comment for any enquiry or questions.
Extradosed Bridges – Assessment of seismic damage using Ground Acceleration a...
Forced vibration of structure for given Earthquake time history is governed by peak acceleration. For
cable stayed structures such as Extradosed cable stayed bridge it is difficult to predict dynamic response using
usual methods of dynamic analysis as applied to some other bridge structures like response spectrum analysis,
accurate analysis like time history analysis is time consuming and has time and cost effects. Nonlinearities can
only be considered in time history analysis. The proposed method correlates the peak ground acceleration
(PGA) and earthquake deformation ratio (EDR) which can be used for simplified dynamic analysis and can
prove handy tool for structural engineers to know earthquake related serviceability without much complicated
analysis at initial stages. This ratio can be used to present seismic damage indices. The method is proposed
considers Extradosed bridge for example.
Offshore engg
Monopiles, Monopiles Virtual Model, Monopiles installation Steps, Software & Numerical Model, Conclusion & further Challenges
Maglev Train
The document describes the design of a model maglev train using superconductors. Key points:
1) The student prepared YBCO superconductor pellets and studied their properties, including critical temperature measurement showing a transition at 91K.
2) X-ray diffraction analysis showed the sample had the expected crystal structure but with mixed phases and oxygen deficiency, resulting in weaker than expected levitation forces.
3) A magnetic track design using a Halbach array was proposed to guide the maglev vehicle.
4) A preliminary vehicle design was presented to carry YBCO pellets in liquid nitrogen, but levitation forces were too weak to lift the prototype as planned.
Linear Dynamic Analysis and Seismic Evaluation of RC Building
The document summarizes linear dynamic analysis and seismic evaluation of a 10-story reinforced concrete model structure tested on a shake table in Japan. Key aspects include:
1) The structure was modeled in SAP2000 and consisted of special moment resisting frames (SMRFs) in the long direction and reinforced concrete shear walls in the short direction.
2) Response spectrum analysis was performed in SAP2000 using design spectra from the test site in Japan. The fundamental period of the structure was found to be 0.538 seconds in the short direction and 0.947 seconds in the long direction.
3) Capacities of critical members were calculated using ACI 318 and compared to demands from SAP2000 to check
What's hot (15)
ANALYSIS AND DESIGN OF RESIDENTIAL TOWER BY DYNAMIC ANALYSIS USING RESPONSE S...
ANALYSIS AND DESIGN OF RESIDENTIAL TOWER BY DYNAMIC ANALYSIS USING RESPONSE S...
Extradosed Bridges – Assessment of seismic damage using Ground Acceleration a...
Extradosed Bridges – Assessment of seismic damage using Ground Acceleration a...
Linear Dynamic Analysis and Seismic Evaluation of RC Building
Linear Dynamic Analysis and Seismic Evaluation of RC Building
More from struds
08 release notes esrgsr 3.3
The document introduces a new type of tank with a dome center and slab beam periphery. It provides DXF output files for different tank designs that can now be opened in AutoCAD without loading additional files, including Intze, conical, cylindrical, rectangular, cylindrical GSR and rectangular GSR tank designs. Modifications were also made to allow user-defined pile design capacity and fix issues with editing seismic and wind load parameters.
05 release notes 3.0.8
New pile foundation types have been added including bored and driven cast-in-situ and precast piles, and piles can now be designed as friction, end bearing, or both. Different concrete grades can be assigned for column design, modifications were made to staircases in cylindrical ESRs, predefined capacity calculation was added for Intze tanks, and several bugs were fixed regarding column properties, floor name display, BRB depth in Intze tanks, and a wall as beam feature for cylindrical tanks.
04 release notes 3.0.7
The release notes describe modifications made to the detailing of reinforcement in various types of tanks in ESRGSR 3.0.7, including bottom ring beams, Intze tanks, conical tanks, cylindrical and rectangular ESR tanks, cylindrical and rectangular GSR tanks, and slab beam tanks. The release also includes demo examples in a new Examples folder on the accompanying CD.
03 release notes 3.0.6
The release notes describe modifications made to the design and reinforcement detailing of various tank components in ESRGSR 3.0.6, including the bottom ring beam, Intze tanks, conical tanks, cylindrical and rectangular ESR tanks, and cylindrical and rectangular GSR tanks. The update also includes demo examples on the CD in a new Examples folder.
02 release notes 3.0.5
The release notes summarize new features for ESRGSR 3.0.5, including introducing flat slab designs for cylindrical tanks, adding rectangular or circular column options for flat slabs, including hydrodynamic pressures for conical tanks, incorporating earthquake loads per IS 1893:2002, allowing for catwalks along tank perimeters, and fixing various bugs in reports and calculations.
01 release note 3.1.0
This release note describes updates made in version 3.1.0, including fixing issues with initializing data generation, saving dead storage values, including wall load in bottom beam calculations, completing dynamic analysis reports, and solving problems with abnormal program termination when opening or reopening files in different modules, showing improper reinforcement parameters, performing foundation design, and applying wind load after dynamic analysis.
06 release notes 3.0.9
This release notes document summarizes updates made in version 3.0.9 of the ESRGSR software. The updates include: fixing a bug in wall thickness design for rectangular tanks with flat slabs; resolving an issue where cylindrical tank height was incorrectly replaced by design height in container properties; and solving an error that occurred in cylindrical tanks with top slab beams due to a small grid size.
14 struds 2010 (Aug release)
This document summarizes new features and enhancements in the STRUDS structural analysis and design software, including improved 3D visualization, direct import of CAD plans, automatic mesh generation, stress contour visualization, modeling of industrial structures, improved seismic and slab design, minor bug fixes, and more.
13 struds 2010 (Jan. release)
The document describes several new features and enhancements in the software related to modeling, analysis, and design of structural elements. Key features include the ability to design column connections at beam ends, add extra steel to beams, edit beams grid-wise, import DXF files layer-wise, set default paths for AutoCAD and Excel, save load combinations, create slabs by selecting regions, enhance 3D viewing and editing, add predefined trusses, and view all floors and levels by default in the postprocessor.
12 release notes struds 2009 (Aug. release)
This document describes several new features and improvements in the latest version of STRUDS software. Some key points include:
1) A new graphical interface with unlimited redo-undo options for geometry creation.
2) The ability to move slabs, elements, and nodes during modeling.
3) Using the Complete Quadratic Combination method for modal combinations in generation of earthquake loads.
4) Consideration of column offset and wide column effects in the design of beams and calculation of moments and shear forces.
11 release notes struds 2009 (Jan release)
The document describes several new features and improvements to the STRUDS software. Some key additions include the ability to import and export files with ETABS, new options for perpendicular snapping and window selection in column modeling, and the implementation of Fe550 grade steel in structural designs. Improvements were also made to DXF drawings for beams, slabs, columns, shear walls, and footings.
09 struds 2008 Jan release
Animation has been added to visualize structural behavior under earthquake loads. Users can identify weak elements by viewing the animation and strengthen elements by increasing their stiffness. Modal mass and participation factors are introduced as per IS 1893 to calculate effective seismic weight and contribution of each mode. Distribution of earthquake loads on columns and walls is reported floor-wise and for the whole structure. Beam, column and footing detailing and quantity reports are now available in HTML format, and DXF outputs are improved with no overlapping text. User interaction is added for DXF layer and dimension specifications.
08 release notes struds 2007
Major enhancements were made to 3D modeling, rendering, loads, structural design, and file interoperability in STAAD.Pro. Key updates include selection and editing in 3D view, improved 3D rendering, displaying loads in 3D, notional wind load generation, floor loading commands, modifying shear walls, and column orientation to any angle. Beam design was improved to modify beams when minimum stirrup spacing is not met.
07 release notes 2005
The document provides release notes for STRUDS 2005 software. Major updates include:
1) Complete integration of all modules (pre/post-processing, analysis, design) allowing toggling between modes within a single file.
2) Introduction of L-shaped and T-shaped column design and analysis as well as shear wall design/analysis.
3) Enhancements to the preprocessor including load definition and a collapsible tree menu for entity creation/editing.
06 release document_8.9.2
The 8.9.2 release notes summarize updates made to the preprocessor, postprocessor, RCC design modules. Key changes include modifications to section property dialogs in preprocessing, corrections to trapezoidal slab design and deflection check reporting in slabs, updated unit conversions in beam and column design reports, and modified footing area calculations in footing design reports.
05 release document_8.9.1
The release notes summarize updates to the version 8.9.1 modeling and design software. In the preprocessor, front end optimizations for master-slave modeling were implemented along with other modeling enhancements. For R.C.C. design, slab design calculations now better account for provided steel ratios and trapezoidal footings can now be designed with eccentricity. Truss element numbering bugs were also addressed.
04 release document_8.9
1. The STRIDS 8.9 release notes summarize updates to the preprocessor, including adding consideration of rigid floor diaphragm action, compatibility with seismic standards, and options for importing/exporting DXF files.
2. Updates to the post-processor include improved slab design for partially continuous edges and corrected steel schedules. Beam design was updated with options for bar diameter selection and added HTML reports.
3. Updates in footing design include combined effects of pressures considered for moment and shear calculations in combined footings, and steel calculated for shear. Drafting changes allow DXF output of footing plans and sections.
03 release document_8.8.1
1. Version 8.8.1 of the STRUDS software includes several new options and enhancements for preprocessors, postprocessors, RCC design modules, and drafting.
2. New preprocessor options allow renumbering of inclined elements, releasing column elements below a level, and defining soft storeys and vertical earthquake forces on selected elements.
3. Postprocessor enhancements include displaying the current load combination in the status bar and adding unit display and scrolling to element charts.
02 release document_8.8
The 8.8 version release notes provide updates across multiple modules of the software. Key changes include: 1) Unique IDs will now be displayed for all elements and can be toggled on/off; 2) Users can modify unique IDs and renumber elements. Additional changes were made to the preprocessor, postprocessor, truss define, RCC design, slab design, beam design, column design, and footing design modules. Various bugs were fixed and new options were added to improve the user experience.
01 release document_8.7.1
This release note summarizes new features and fixes for version 8.7.1 of the structural analysis and design software. Key changes include:
1) Improved load generation and handling for slabs, wind loads, and member releases.
2) Enhancements to beam, column, and footing design reports including dynamic report generation and selection of report details.
3) Fixes to load combinations, ductile detailing options, analysis and design modules, file backups, and drafting outputs.
4) New options added for trapezoidal loads, flexural moments, torsional moments on elements while others have been temporarily removed.
More from struds (20)
07 release notes for esrgsr 3.2
- 1. Release notes for ESRGSR 3.2 1. Implementation of IS 1893: 2002 part 2 which is given for Liquid retaining structures. a) Using this total weight of the structure is calculated first.
- 3. b) Then the lateral force in X and Y direction are calculated for tank empty condition.
- 4. b) For tank full condition the impulsive and Convective mass are calculated using Section 4.2.2.2 of IS.
- 7. d) For these masses the time period and lateral forces are calculated. 2. Grid value related changes in Slab Beam type of tank are made. 3. Column editing related changes in cylindrical type of tank is made. 4. Modification in Flat slab detailing regarding min. steel.