Here is a list of 8 types of industrial pins used for various applications in industries. General use of Industrial pin is to couple two or more machinery with each other. 8 various types of Industrial pins are like Drive pins, Groove pins, Knurled pins, Parallel pins, Coiled spring pin, Clinch pins, Hairclip pin, and a safety pin. Know more about each here.

2. Industrial pins are specially designed to maintain shear and torsional restraints.
The use of this part is a couple, align, mount, assemble, or penetrate two
workpieces with shared space. The work of the pin based on design and use.
Types of Industrial Pins
» Drive Pins
» Groove Pins
» Knurled Pins
» Parallel Pins
» Coiled Spring Pin
» Clinch Pins
» Hairclip Pin
» Safety Pin

3. • Drive pins have an interference fit and must be pressed
into position.
• Drive pins are placed in pre-drilled holes with a hammer
punch that makes a needle into the hook form, extending
the anchor to form a secure fit.
• These anchors ensure light weights to masonry elements.
• They are generally utilized to join parts in rotary or other
moving forms.

4. • Grooved pins, or grooved dowel pins with 3 parallel
grooves
• It is a solid press-fit fastener that is driven into a properly
sized hole, giving the precise interference fitted to lock the
fastener in position.
• Generally, it is used in locking devices, shafts, bearing
surfaces or locating components
• It is available with several distinct groove types like
Groove E, U, A, H etc.

5. • Knurled Pins are just like to grooved pins that have
serrations about the diameter.
• Though, knurled pins have many more serrations.
• They are press fit fasteners that, when pressed into a
hole, eject radial bands to keep the fastener in position.
• Different diameters, lengths and end configurations
available in it

6. • Parallel pins are designed with 3 equispaced longitudinal
grooves.
• They are driven or pushed into the cylindrical body to
deform the pin stock outside within controlled limits.
• When this pin is forced into a drilled hole of proper
diameter, a locking fit is obtained.
• Only a direct drilling hole is needed and no reaming is
required.

7. • Coiled spring pins in three separate duties, light duty,
standard duty, and heavy-duty.
• So it can meet the needed power and versatility for each
application.
• A coiled spring pin is a deep, split dowel pin that uses
uniform outside stress when applied into a nut or shaft
hole.
• Coiled spring pins are also simple to inject and remove.

8. • The clinching pin gives a powerful flush-head part in stuff
which is very thin like 040” (1mm).
• It will also give a sharp push-out appearance and is a
familiar option in positions where push-out strength is a
basic design idea.
• Clinching pins are simply fixed by putting them in suitably
glazed holes in sheets and pressing into position with any
standard press
• It has high torque-out and pushout resistances.

9. • Hairclip pins are usually utilized to secure the edges of
hitch pins and clevis pins by being injected into a slot or
groove.
• The use of these pins along with the straight edge
assures secure attachment to the aspired elements of
devices.
• Most Hairclip pin clips are produced from spring wire or
stainless steel can also be used.
• It is simply fastened to prevent the loss, a simple, cost-
effective way of ensuring material

10. • Safety pins are wire-wound and similar in construction
and function to household fasteners by the same name.
• Elements are collected on a straightened side of the clip,
with the other side giving a hook to hold the pieces.
• It is utilized essentially for ensuring hitch pins and gates.
• Safety pins can also substitute hairpin clips and cotter
pins.

11. • In industries, there are mating elements, for example, a container
and a vehicle. Now, these both require to copulate collectively.
• And so to do the same, industrial pins are required. They normally
use a set of locking devices to do the same.
• Industrial pins are also offering the same working functions and they
are available in various collections.
• To know more, visit the source link:
Types of Operations of Industrial Pins Manufacturers India

12. Survey No.2127, Mulchand Road
Wadhwan City, Surendranagar.
Gujarat-363 035, India.
www.skpbearings.com
+91-9374326394 / +91-93744 26396
skpbearings@gmail.com