შუახევის მუნიციპალიტეტი
•Download as PPTX, PDF•
0 likes•1,272 views
პრეზენტაცია მომზადებულია ილიას სახელმწიფო უნივერსიტეტის პროგრამა საქართველოს ტურისტული რესურსების ფარგლებში გოჩა შარვაშიძის მიერ.
Recommended
More Related Content
Viewers also liked
Viewers also liked (20)
More from Gocha Sharvashidze
More from Gocha Sharvashidze (20)
შუახევის მუნიციპალიტეტი
- 1. ილიას სახელმწიფო უნივერსიტეტი შუახევის მუნიციპალიტეტი გოჩა შარვაშიძე Gocha.sharvashidze.1@iliauni.edu.ge
- 2. შუახევის მუნიციპალიტეტი 1 • მდებარეობა 2 • ისტორიული მომოხილვა 3 • მოსახლეობა
- 3. შუახევი გომარდული დიდი პერსპექტივა აქვს ზამთრისა და საზაფხულო ტურიზმის ცალკეული სახეობების განვითარებას. რაიონის ცენტრიდან 7 კმ-ის მოშორებით, სოფელ გომარდულში, ზღვის დონიდან 1430 მეტრზე, სამთოსათხილამურო სპორტის განვითარების საუკეთესი პირობებია. ტურისტული ბაზა შეიძლება განთავსდეს 400 ჰექტარზე და მისთვის დამახასიათებელი ინფრასტრუქტურის შექმნით უამრავი დამსვენებელი მიიზიდოს როგორც ზამთარში, ასევე წელიწადის ნებისმიერ დროს.
- 4. Suaxevis turistuli resursi da bunebrivi simdidre რაიონის საკურორტო ადგილები თითქმის ყველა სოფელში, ასევე ალპურ ზონებშიც (ჩირუხი, ჯინალი, ტომაშეთი, საღორია, ღომა) ფართო პროფილით ხასიათდება და შესაბამისი ინფრასტრუქტურის განვითარების შემთხვევაში ბევრ დამსვენებელს მიიზიდავს.
- 5. შუახევის ფლორა და ფაუნა შუახევის ფლორისა და ფაუნის გარკვეული სახეობები შეტანილია წითელ წიგნში მუნიციპალიტეტის ტყეები მდიდარია გარეული ხილით, აგრეთვე სამკურნალო მცენარეებით.
- 6. ჰიდროლოგიური რესურსები მინერალური წყალი ტომაშეთი სოფელ ტომაშეთიდან დაახლოვებით 10 კილომეტრში მდინარე ჩირუხისწყალი: დასავლეთ საქართველოში, შუახევის სხვა მდინარეებიდან აღსანიშნავია მდინარე ჭვანისწყალი და მდინარე აჟარისწყალი მუნიციპალიტეტში, მდინარე აჭარისწყლის მარცხენა შენაკადია. სათავე აქვს შავშეთის მდებარეობს. ის დღეღამური დებეტით და პემპერატურით გამორჩეული წყალია. რომელიც შუახევის მუნიციპალიტეტის ტერიტორიაზე გასალიანი და შრატიანი მთა ჩირუხში მდებარეობს ორი ძალიან ლამაზი ტბა 17 კილომეტრის მანძილზე მნიშვნელოვანი მინერალური წყლებიდან აღსანიშნავია ასევე წყალამპარა, ბოგილი და ქედის ჩრდილოეთ კალთაზე. ზღვის დონიდან 2220 მეტრ სიმაღლეზე.მთა ჩირუხის გაედინება ღომის წყაროები. ტერიტორიაზე.
- 7. კავიანის ციხე ოთოლანის ციხე ჭვანის თათოვანი ხიდი ნიგაზეულის ციხე ფურტიოს ხიდი Ffurtios xidi mdebareobs amave dasaxelebis soflisa da aWariswylis cixe mdebareobs centraluri saavtomobilo gzis baTumi-xulo nigazeulis igi pirdapir gadahyurebs Wvaniswylisa damxares, kavianis serze, xiWauris cixe mdebareobs aWariswylis marcxena aWariswylis xeobebis xeobis dasawyisSi. xidi akavSirebdaxidis sigrZeasxalTiswylis xeobaSim. xidi agebulia me-18 saukunis bolos. erTmaneTs 17,20 m, sigane – 2,35 SesarTavebTan,km-iT daSorebul aWarisnigazeulSi arsebul ციხეებს. pirdapir, mdinareebis Wvaniswylisa da aWariswylis შესართავის qvemoT. asaqcevidan 5 qvemo da zemo sofel sazRvarze arsebul Zvel gzebs aWariswylis xeobaSi gamaval centralur trasasTan
- 8. შუახევის მუნიციპალიტეტის კულტურული ძეგლები ტერიტორია სადაც ციხე მდებარეობს გოგლაური ეწოდება. აქ ამოზრდილია უზარმაზარი 2001 წელს ჯერ კიდევ ხარაჩოებში ჩასმულმდებარეობს რომელიცმეუფე დიმიტრიმ დასოფლის ჩანჩხალოს ციხე ნამალევის კლდის თავზე მშენებარე ეკლესიაში თითქმის მიუვანია. კლდის სამი მასივი . მდინარე ჩირუხისწყლის ნაპირზე სოფელ უჩამბაში მდებარეობს.შედარებით ოქროპილაურის ციხე ციხე აღმართულია შუა კლდის მასივზე რაც განსაზღვრავს ციხის ფორმას. მართმადიდებელი ეკლესიის მღვდელმსახურებმა აღასრულეს პირველი წირვა –ლოცვა, ასევე მოსახლეობა მას თამარის ციხეს უწოდებს რის გამოც შეგვიძლია ვივარაუდოთ რომ ის კარგადაა შემონახული ციხის ჩრდილოეთი კედელი. მაქსიმალური კედლები. საერთო ჯერ კიდევ სემორჩენილია ციხის ჩრდილოეთი და დასავლეთისიმაღლე 7 მეტრი. ფართობი 190 შედგა პირველი ნათლობა.ამ დღეს 80–ზე მეტი ახალგაზრდა და მოხუცი მოინათლა. მეთორმეტე მეცამმეტე საუკუნეებში უნდა იყოს აგებული. კვადრატული მეტრი.
- 9. დღესასწაულები შუამთობა ეს არის დღესასწაული შუახევის მაღალმთიან სოფლებში.იმართება აგვისტოს პირველ შაბათ -კვირას. მარეთობას უკვე 9 წელიანი ტრადიცია აქვს. ტარდება კონცერტი ასევე იმართება სპორტული შეჯიბრებები.აქვე შეგიძლიათ შეიძინოთ ხელნაკეთი ნივთებიც. სიმღერისა და ცეკვის დღესასწაული იმართება შემოდგომაზე.სრულდება ლექსები, ძველი სიმღერები, შაირები და სხვა ღონისძიებები.
- 10. საღორია პროფილაქტიკურ კარდიოლოგიური დაბალმთიანი საკურორტო ადგილი აჭარაში, ზღვის დონიდან 800 მ. ტომაშეთი კლიმატო ბალნეოლოგიური საკურორტო ადგილი ზღვის დონიდან 1800მ-ზე ჯინალი პროფილაქტიკური საკურორტო ადგილი ზღვის დონიდან 2000მ-ზე სამთო სალაშქრო ტურიზმის განვითარების პერსპექტივით ღომა მაქსიმალური სიმაღლე ზღვის დონიდან 2300მ სამთო სათხილამურო ტურიზმის განვითარების პერსპექტივით
- 12. სასტუმრო ,,შუახევი“- მდებარეობს მუნიციპალიტეტში კიდევ ორი საოჯახო ტიპს საოჯახო სასტუმრო ,,იმედი“-აქ დამსვენებელი შუახევის ცენტრში.სასტუმროში არის სასტუმროა კოტეჯები კურორტ ,,გომადულში“- თითო ისტორიულ-კულტურულ ძეგლებს, აჭარული • ,,მწვანე სახლი“-ნიგაზეული რესტორანი სა კაფე-ბარი.ფასი მერყეობს კოტეჯს ცხოვრებასა და 7 ადამიანის მიღება სოფლის ერთდროულად ადათ-წესების • ,,ქვემოურები“- ნიგაზეული შეუძლია.ფასი იწყება დღეში 65 30-დან 50 ლარამდე გაეცნობა, შეისწავლის ტრადიციული კერძების ლარიდან.საფასურში შედის სამჯერადი კვება დამზადებას.
- 13. აჭარული ხაჭაპური კვება აჭარული ბორანო სინორი მაწვნის სუფი ისპანახის ბორანო
- 14. მთა ჩირუხი მდებარეობა არსიანის მთა თავკალვა ამინდი დღესასწაული ტურისტული პოტენციალი ჩირუხი მდებარეობს აჭარის ზაფხულში დღის განმავლობაში სამხრეთ აღმოსავლეთ ნაწილში იქ ჩირუხი არისმისი ეტიმოლოგია ხანდახან ტემპერატურა 30 შუამთობა-ეს ადგილი თავკალვაი - გახლავთსადაც არსიანის მთა მდებარეობს ჩირუხის სადაც მდინარე ჩირუხისწყალი შესაძლებელიასაღამოს კი15 გრადუსამდეა რომელიც ყოველ დღესასწაული როგორც ასეთია: თავ -კალო ანუ, ამ სამხრეთ აღმოსავლეთ ნაწილში იღებს სათავეს და შავშეთისა და საზაფხულო ასევე საზამთრო გრადუსამდე ეცემა. ზამთარი წელს აგვისტოს თავი - შაბათ კლდოვანი მთისპირველზედაპირი ზღვის დონიდან კვეთენ არსიანის ქედები 3165 მეტრზე კურორტის აშენებაარასდროს არაა ცივია.ამ სეზონზე კვირას იმართება. არის კალოს მსგავსი. ერთმანეთს.ის ზღვის დონიდან ტემპერატურა 0 გრადუსზე ზემოთ. 2000 მეტრზე მდებარეობს
- 15. ინფრასტრუქტურული პროექტები შუახევის მუნიციპალიტეტი მოსაცდელების მშენებლობა 2014 წელი ხიდების მშენებლობა გზების რეაბილიტაცია სოფლებში გარე განათების მოწყობა სოფლის ცენტრების კეთილმოწყობა აჭარისწყლის ჰესის მშენებლობა
- 16. SWOT ანალიზი ძლიერი მხარეები: 1. ბუნების მრავალფეროვნება 2.კულტურული ძეგლების სიმრავლე 3.ჰიდროლოგიური რესურსების მრავალფეროვნება საფრთხეები: 1. ტურისტული ძეგლების და საკურორტო ადგილის არა აქტუალურობა 2. მეწყერ საშიში ადგილების სიხშირე 3. მკაცრი კლიმატი 4. საკურორტო ადგილების სიმრავლე. 5.ადგილობრივი კერძების ნრავალფეროვნება სუსტი მხარეები 1. გრუნტის გზა 2. ტურისტული ინფრასტრუქტურის არარსებობა 3. ძეგლებამდე სამანქანო გზის არ არსებობა 4. განთავსების საშუალებების სიმცერე. შესაძლებლობები: 1. სამთო და სალაშქრო ტურიზმის განვითარება 2. საზამთრო კურორტების მოწყობა 3. სანადირო ტურიზმის განვითარება 4. კულინარიული და აგრო ტურიზმის განვითარება 5. ეკოტურიზმის განვითარება
Editor's Notes
- Animated picture fly in and box out(Intermediate)Tip: For best results when reproducing the picture effect on this slide, you may want to use the Snap objects to other objects feature. To do so, right-click the slide background and then click Grid and Guides. Under Snap to, select Snap objects to other objects.To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout and then clickBlank. On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size & Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 4” and the width is set to 5.33”. To crop the picture, click Crop in the left pane, and in the Croppane, under Crop position, enter values into the Left, Right, Top, and Bottom boxes. To resize the picture, click Size in the left pane, and in the Size pane, under Size and rotate, enter values into the Height and Width boxes.On the Home tab, in the Drawing group, click Arrange,point to Align, and then do the following: Click Align to Slide.Click Align Center.Click Align Middle.On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rectangle (first option from the left).On the slide, drag to draw a rectangle.Select the rectangle. Under DrawingTools, on the Format tab, in the Size group, do the following:In the in the Shape Height box, enter 0.05”.In the Shape Width box, enter 10.3”.Under DrawingTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, and then click Blue, Accent 1 (first row, fifth option from the left).Under DrawingTools, on the Format tab, in the Shape Styles group, click Shape Effects, point to Preset, and then under Presets, click Preset 8 (second row, fourth option from the left).Select the rectangle. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Repeat this process three more times for a total of four rectangles.Drag one of the rectangles until the bottom edge of the rectangle meets the top edge of the picture.Drag another rectangle until the top edge of the rectangle meets the bottom edge of the picture.Press and hold CTRL, and then select the other two rectangles. Under DrawingTools, on the Format tab, in the Size group, do the following: In the Shape Height box, enter 7.8”.In the Shape Width box, enter 0.05”.Drag one of the vertical rectangles until the right edge of the rectangle meets the left edge of the picture.Drag the other vertical rectangle until the left edge of the rectangle meets the right edge of the picture. Press and hold CTRL, and then select both of the horizontal (top and bottom) rectangles. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click AlignCenter.Press and hold CTRL, and then select both of the vertical (left and right) rectangles. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click AlignMiddle.To reproduce the animation effects on this slide, do the following:Press and hold CTRL, and then select the four rectangles on the slide. On the Animations tab, in the AdvancedAnimation group, click AddAnimation, and then under Entrance click Fly In.On the Animations tab, in the Timing group, do the following:In the Start list, select With Previous.In the Duration box, enter 2.0.On the slide, select the top horizontal rectangle. On the Animations tab, in the Animation group, click EffectOptions, and then click FromBottom.On the slide, select the bottom horizontal rectangle. On the Animations tab, in the Animation group, click EffectOptions, and then clickFrom Top.On the slide, select the left vertical rectangle. On the Animations tab, in the Animation group, click EffectOptions, and then clickFrom Right.On the slide, select the right vertical rectangle. On the Animations tab, in the Animation group, click EffectOptions, and then click From Left.On the slide, select the picture. On the Animations tab, in the AdvancedAnimation group, click AddAnimation, and then click More Entrance Effects. In the Add Entrance Effect dialog box, under Basic, click Box, and then click OK.With the picture selected, also on the Animations tab, in the Animation group, click EffectOptions, and then click Out.Also on the Animations tab, in the Timing group, do the following:In the Start list, select With Previous.In the Duration box, enter 0.7In the Delay box, enter 1.3.Press and hold CTRL, and then select the four rectangles on the slide. On the Animations tab, in the AdvancedAnimation group, click AddAnimation, and then under Exit click Fly Out.Also on the Animations tab, in the Timing group, do the following:In the Start list, select With Previous.In the Duration box, enter 2.0. Also on the Animations tab, in the AdvancedAnimation group, click AnimationPane. On the slide, select the top horizontal rectangle. In the Animation Pane, select the highlighted fly-out effect. In the Animation group, click EffectOptions, and then click ToBottom. On the slide, select the bottom horizontal rectangle. In the Animation Pane, select the highlighted fly-out effect. In the Animation group, click EffectOptions, and then click To Top.On the slide, select the left vertical rectangle. In the Animation Pane, select the highlighted fly-out effect. In the Animation group, click EffectOptions, and then click To Right.On the slide, select the right vertical rectangle. In the Animation Pane, select the highlighted fly-out effect. In the Animation group, click EffectOptions, and then click To Left.On the slide, select the picture. On the Animations tab, in the AdvancedAnimation group, click AddAnimation, and then click More Exit Effects. In the Add Exit Effect dialog box, under Basic, click Box, and then click OK.In the AnimationPane, select the 10th animation (box exit effect). In the Animation group, click EffectOptions, and then click In.On the Animations tab, in the Timing group, do the following:In the Start list, select WithPreviousIn the Duration box, enter 0.7.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Backgrounddialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left).Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from left in the slider, and then do the following:In the Stop position box, enter 46%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Select the second stop from the leftin the slider, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 60% (third row, fifth option from the left).
- Animated pictures fly in from gray to full color(Advanced)Tip: For the effects on this slide, it is recommended to use pictures with a “portrait” (vertical) orientation. To reproduce the text effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, select Georgiafrom the Font list, enter 34 in the Font Size box, click Italic, click the arrow next to Font Color, and then under Theme Colors click Aqua, Accent 5, Darker 25% (fifth row, ninth option from the left).Drag the text box into the upper half of the slide, slightly left of the center.To reproduce the first picture with animation effects on this slide, do the following:On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert. On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the picture as needed so that the height is set to 3.81” and the width is set to 2.54”. To crop the picture, click Crop in the left pane, and in the Crop pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the Size pane, under Size and rotate, enter values into the Height and Width boxes.Drag the picture into the into the top left corner of the slide. (Note: Align the left edge of the picture with the left edge of the slide, and leave a small margin between the top edge of the picture and the top edge of the slide.)Select the picture. Under PictureTools, on the Format tab, in the bottom right corner of the Picture Styles group, click the Format Picture dialog box launcher.In the Format Picture dialog box, in the left pane click Picture Correction, in the Picture Correction pane, under Brightness and Contrast, in the Brightness box, enter 50%.Also in the Format Picture dialog box, in the left pane click Picture Color, in the Picture Color pane, under Recolor, click the button next to Presets and click Grayscale.On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fly In.Also on the Animations tab, in the Animation group, click Effect Option, and then click From Left.Also on the Animations tab, in the Timing group, do the following:In the Start list, select With Previous.In the Duration box, enter 1.00 seconds.Also on the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Entrance Effects. In the Add Entrance Effect dialog box,under Subtle, click Expand, and then click OK.Also on the Animations tab, in the Timing group, do the following:In the Start list, select With Previous.In the Duration box, enter 1.00 seconds.To reproduce the second picture with animation effects on this slide, do the following:On the slide, select the picture. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Drag the second picture until its left side slightly overlaps the right side of the first picture.Select the second picture. Under PictureTools, on the Format tab, in the bottom right corner of the Picture Styles group, click the Format Picture dialog box launcher. In the Format Picture dialog box, in the left pane click Picture Corrections, in the PictureCorrection pane, under Brightness and Contrast, in the Brightness box, enter 40%.On the Animations tab, in the Advanced Animation group, click Animation Pane.Press and hold CTRL, and then select the third and fourth animation effects (fly-in and expand effects for the second picture) in the Animation Pane. On the Animations tab, in the Timing group, in the Delay box, enter 0.2.To reproduce the third picture with animation effects on this slide, do the following:On the slide, select the second picture. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Drag the third picture until its left side slightly overlaps the right side of the second picture.Select the third picture. Under PictureTools, on the Format tab, in the bottom right corner of the Picture Styles group, click the Format Picture dialog box launcher. In the Format Picture dialog box, in the left pane click Picture Corrections, in the Picture Corrections pane, under Brightness and Contrast, in the Brightness box, enter 20%. Press and hold CTRL, and then select the fifth and sixth animation effects (fly-in and expand effects for the third picture) in the Animation Pane. On the Animations tab, in the Timing group, in the Delay box, enter 0.4.To reproduce the fourth picture with animation effects on this slide, do the following:On the slide, select the third picture. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Drag the fourth picture until its left side slightly overlaps the right side of the third picture.Select the fourth picture. Under PictureTools, on the Format tab, in the bottom right corner of the Picture Styles group, click the Format Picture dialog box launcher. In the Format Picture dialog box, in the left pane click Picture Corrections, in the Picture Corrections pane, under Brightness and Contrast, in the Brightness box, enter 0%. Press and hold CTRL, and then select the seventh and eighth animation effects (fly-in and expand effects for the fourth picture) in the Animation Pane. On the Animations tab, in the Timing group, in the Delay box, enter 0.6.To reproduce the fifth picture with animation effects on this slide, do the following:On the slide, select the fourth picture. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Drag the fifth picture until its left side slightly overlaps the right side of the fourth picture.Select the fifth picture. Under PictureTools, on the Format tab, in the bottom right corner of the Picture Styles group, click the Format Shape dialog box launcher. Also in the Format Picture dialog box, in the left pane click Picture Color, in the Picture Color pane, under Recolor, click the button next to Presets and click No Recolor.Press and hold CTRL, and then select the ninth and 10th animation effects (fly-in and expand effects for the fifth picture) in the Animation Pane. On the Animations tab, in the Timing group, in the Delay box, enter 0.8.To reproduce the animation effects for the text box on this slide, do the following:On the Home tab, in the Editing group, click Select, and then click Selection Pane.In the Selection and Visibility pane, select the text box. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.Also on the Animations tab, in the Timing group, do the following:In the Start list, select With Previous.In the Duration box, enter 0.50 seconds.In the Delay box, enter 1.30 seconds.In the Selection and Visibility pane, press and hold CTRL, and then select the first, second, third, and fourth pictures. On the Animations tab, in the AdvancedAnimation group, click Add Animation, and then under Exit click Fade.Also on the Animations tab, in the Timing group, do the following:In the Start list, select With Previous.In the Duration list, select 1.00 second.In the Animation Pane, select the 12th animation effect (first fade effect). On the Animations tab, in the Timing group, in the Delay box enter 1.40 seconds.In the Animation Pane, select the 13th animation effect (second fade effect). On the Animations tab, in the Timing group, in the Delay box enter 1.60 seconds.In the Animation Pane, select the 14th animation effect (third fade effect). On the Animations tab, in the Timing group, in the Delay box enter 1.80 seconds.In the Animation Pane, select the 15th animation effect (fourth fade effect). On the Animations tab, in the Timing group, in the Delay box enter 2.00 seconds.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the right pane, and then do the following:In the Type list, select Radial.Click the button next to Direction, and then click From Center (third option from the left).Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following:In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 5%(second row, first option from the left). Select the next stop in the slider, and then do the following: In the Position box, enter 34%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 15% (third row, first option from the left). Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 50% (sixth row, first option from the left).
- Animated open book effect(Difficult)Tip: You will need to use drawing guides and the ruler to position the objects on this slide. To display the drawing guides and the ruler, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.Right-click the slide background area, and then click Grid and Guides.In the Grid and Guides dialog box, underGuidesettings, select Display drawing guides on screen. (Note: One horizontal and one vertical guide will display on the slide at 0.00, the default position. The spine of the book will be aligned to the vertical drawing guide.) On the View tab, in the Show/Hide group, select Ruler. To reproduce thefirst shape in the Book cover group on this slide, do the following:On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rounded Rectangle (second option from the left). On the slide, drag to draw a rounded rectangle.Select the rounded rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 4.5”.In the Shape Width box, enter 3.33”.On the rounded rectangle, drag the yellow diamond adjustment handle to the left to decrease the amount of rounding on the corners.On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, select Gradientfill in the Fill pane, and then do the following: In the Type list, select Linear.Click the button next to Direction, and then click Linear Right (first row, fourth option from the left).In the Angle box, enter 0°. Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider. Also under Gradient stops, customize the gradient stops that you added as follows:Select the first stop in the slider, and then do the following:In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors,click Red, Accent 2, Darker 50% (sixth row, sixth option from the left).Select the second stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors,click Red, Accent 2, Darker 25%(fifth row, sixth option from the left).Also in the FormatShape dialog box, click LineColor in the left pane. In the LineColor pane, select Noline.Also in the FormatShape dialog box, click 3-DFormat in the left pane, and then in the 3-DFormat pane, do the following:Under Bevel, click the button next to Top, and then under Bevel click Circle (first row, first option from the left). Next to Top, in the Width box, enter 4 pt, and in the Height box, enter 4 pt.Under Surface, click the button next to Material, and then under Standard click WarmMatte (second option from the left).Also under Surface, click the button next to Lighting, and then under Neutral, click ThreePoint (first row, first option from the left).On the slide, drag the rounded rectangle until the left edge is against thevertical drawing guide.On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle.To reproduce thesecond shape in the Book cover group on this slide, do the following:On the Home tab, in the Clipboard group, click the arrow under Paste, and then clickDuplicate.On the slide, drag the duplicate rectangle untilthe left edge is against the vertical drawing guide.On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:ClickAlign to Slide. Click Align Middle.Under Drawing Tools, on the Format tab, in the Size group, in the Shape Width box, enter 0.73”.On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, select Gradientfill in the Fill pane, and then do the following: In the Type list, select Linear.Click the button next to Direction, and then click Linear Left (first row, fifth option from the left).In the Angle box, enter 180°.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider. Also under Gradient stops, customize the gradient stops that you added as follows:Select the first stop in the slider, and then do the following:In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors,clickBlack, Text 1(first row, second option from the left).In the Transparency box, enter 50%.Select the second stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors,clickBlack, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Also in the FormatShape dialog box, click 3-DFormat in the left pane. In the 3-D Format pane, under Bevel, click the button next to Top, and then under NoBevel, click None.To reproduce thethird shape (first small rectangle on the book spine) in the Book cover group on this slide, do the following:Select the first, larger rectangle on the slide. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the third, duplicate rectangle.Under Drawing tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 0.08”. In the Shape Width box, enter 0.73”.On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, select Gradientfill in the Fill pane, and then do the following: In the Type list, select Linear.Click the button next to Direction, and then click Linear Diagonal (first row, third option from the left).In the Angle box, enter 135°.Also in the FormatShape dialog box, click 3-DFormat in the left pane, and then in the 3-D Format pane, do the following:Under Bevel, next to Top, in the Width box, enter 3 pt, and in the Height box, enter 3 pt.Under Surface, click the button next to Lighting, and then under Neutral click Soft (first row, third option from the left).To reproduce therest of the shapes (other small rectangles on the book spine) in the Book cover group on this slide, do the following:Select the third, smaller rectangle.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate. Repeat this process for a total of four thin, rounded rectangles. To position the four thin, rounded rectangles on the book spine, do the following:Drag the first rectangle 1.75” above the horizontal drawing guide, with the left edge touching the vertical drawing guide.Drag the second rectangle 0.75” above the horizontal drawing guide, with the left edge touching the vertical drawing guide.Drag the third rectangle 0.75” below the horizontal drawing guide, with the left edge touching the vertical drawing guide.Drag the fourth rectangle 1.75” below the horizontal drawing guide, with the left edge touching the vertical drawing guide.On the Home tab, in the Editing group, click Select, and then click SelectAll.On the Home tab, in the Drawing group, click Arrange, and then click Group.On the Home tab, in the Editing group, click Select, and then click Selection Pane.On the Selection and Visibility pane, double-click the group to edit the name, and then enter Book cover. To reproduce the first shape in the Inside-left pagesgroup on this slide, do the following:On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rounded Rectangle (second option from the left). On the slide, drag to draw a rounded rectangle.Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 4.5”.In the Shape Width box, enter 3.33”.On the rounded rectangle, drag the yellow diamond adjustment handle to the left to decrease the amount of rounding on the corners. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, select Gradientfill in the Fill pane, and then do the following: In the Type list, select Linear.Click the button next to Direction, and then click Linear Left (first row, fifth option from the left).In the Angle box, enter 180°. Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops that you added as follows:Select the first stop in the slider, and then do the following:In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors,click Red, Accent 2, Darker 50% (sixth row, sixth option from the left).Select the second stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors,click Red Accent 2, Darker 25% (fifth row, sixth option from the left).Also in the FormatShape dialog box, click LineColor in the left pane, and then in the LineColor pane, select No line.On the slide, drag the rectangle until the right edge is against the vertical guideline.On the Home, tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle.To reproduce the second shape in the Inside-left pages group on this slide, do the following:On the Home tab,in the Drawing group, click Shapes, and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 4.33”.In the Shape Width box, enter 3.15”.On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, select Gradientfill in the Fill pane, and then do the following: In the Type list, select Linear.Click the button next to Direction, and then click Linear Left (first row, fifth option from the left).In the Angle box, enter 180°. Under Gradient stops, click Add gradient stops or Remove gradient stops until five stops appear in the slider.Also under Gradient stops, customize the gradient stops that you added as follows:Select the first stop in the slider, and then do the following:In the Position box, enter 0%.Click the button next to Color, and then under ThemeColors, click White, Background 1, Darker 35% (fifth row, first option from the left).Select the second stop in the slider, and then do the following: In the Position box, enter 5%.Click the button next to Color, and then under ThemeColors, click White, Background 1 (first row, first option from the left).Select the third stop in the slider, and then do the following: In the Position box, enter 18%.Click the button next to Color, and then under ThemeColors, click White, Background 1, Darker 5% (second row, first option from the left).Select the fourth stop in the slider, and then do the following: In the Position box, enter 38%.Click the button next to Color, and then under ThemeColors, click White, Background 1 (first row, first option from the left).Select the fifth stop in the slider, and then do the following: In the Position box, enter 93%.Click the button next to Color, and then under ThemeColor,s click White, Background 1 (first row, first option from the left).Also in the FormatShape dialog box, click LineColor in the left pane, and then in the LineColor pane, select Noline.Also in the FormatShape dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets, under Outer click OffsetRight (second row, first option from the left), and then do the following:In the Transparency box, enter 60%.In the Size box, enter 100%.In the Blur box, enter 4 pt.In the Angle box, enter 0°.In the Distance box, enter 3 pt.On the slide, drag the rectangle until the right edge touches the vertical drawing guide.On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle.Press and hold CTRL, and then in the Selection and Visibility task pane, select the rectangle and the rounded rectangle to the left of the vertical drawing guide.On the Home tab, in the Drawing group, click Arrange, and then click Group.In the Selection and Visibility task pane, double-click the new group to edit the name, and then enter Inside-left pages.To reproduce the first shape in the Inside-right pages with text group, do the following:In the SelectionandVisibility task pane, select the Inside-left pages group. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.On the Home tab, in the Drawing group, click Arrange, point to Rotate, and then click MoreRotationOptions. In the Size and Position dialog box, on the Size tab, under Size and rotation, in the Rotation box, enter 180°.In the Selection and Visibility task pane, double-click the new group to edit the name, and then enter Inside-right pages.On the slide, drag the rectangle until the left edge is against the vertical drawing guide.On the Home, tab, in the Drawing group, click Arrange, point to Align, and then do the following:ClickAlign to Slide.ClickAlign Middle. To reproduce the text effects in the Inside-rightpages with text group, do the following:On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw a text box. Enter text in the text box, and then select the text. (Note: To reproduce the example above, enter Introduction.) On the Home tab, in the Font group, do the following:In the Font list, select Vivaldi.In the Font Size list, select 18.On the Home tab, in the Paragraph group, click Center to center the text in the text box.On the slide, drag the text box until the left edge of the text is 1” to the right of the vertical drawing guide and the bottom edge of the text is 0.5” above the horizontal drawing guide. To reproduce the page edges in the Inside-right pages with text group, do the following:On the Home tab, in the Drawing group, click Shapes, and then under Lines click Line (first option from the left). On the slide, press and hold SHIFT, and then drag to draw a straight, vertical line.Select the line.Under Drawing Tools, on the Format tab, in the Size group, in the Shape Width box, enter 4.32”.Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Outline, and then under ThemeColors, click White, Background 1, Darker 15% (third row, first option from the left).On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate. Repeat this process for a total of six lines.On the slide, drag the six lines until they are bunched together in a dense group, no wider than 0.5”. In the Selection and Visibility task pane, press and hold CTRL, and then select all six straight connectors (lines).On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Point to Align, and then clickAlign Selected Objects. Point to Align, and then clickDistribute Horizontally. Point to Align, and then click Align Middle.Click Group.On the slide, drag the group of lines until the right edge of the group of lines is touching the right edge of the white rectangle to the right of the vertical drawing guide.On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle.In the Selection and Visibility taskpane, press and hold CTRL, and then select the group of lines, the text box, and the Inside-right pages group.On the Home tab, in the Drawing group, click the arrow under Arrange, and then click Group.In the Selection and Visibility task pane, double-click the new group to edit the name, and then enter Inside-right pages with text.To reproduce the animation effects on this slide, do the following:In the Selection and Visibility pane, select the Book cover group. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.In the Selection and Visibility pane, select the Inside-left pages group. On the Home tab, in the Drawing group, click Arrange, and then click BringForward.In the Selection and Visibility pane, select the Book cover group. On the Animations tab, in the AdvancedAnimation group, click AddAnimation, point to Exit, and then click MoreExitEffects. In the AddExitEffect dialog box, under Basic, click Wipe.On the Animations tab, in the Timing group, do the following:In the Start list, select WithPrevious.In the Duration box, enter 1.00 second.Also on the Animations tab, in the Animation group, click Effect Options, and then click From Right.In the Selection and Visibility pane, select the Inside-left pages group. On the Animations tab, in the Advanced Animation group, lick AddAnimation, point to Entrance, and then click MoreEntranceEffects. In the AddEntranceEffect dialog box, under Basic, click Wipe.On the Animations tab, in the Timing group,do the following:In the Start list, select AfterPrevious.In the Duration box, select 1.00 seconds. Also on the Animations tab, in the Animation group, click Effect Options, and then click From Right.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left).Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops that you added as follows:Select the first stop in the slider, and then do the following:In the Position box, enter 63%.Click the button next to Color, and then under Theme Colors,click Black, Text 1 (first row, second option from the left).Select the second stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color list, and then under Theme Colors,clickBlack, Text 1, Lighter 50% (second row, second option from the left).
- Animated multiple successive images in a picture show(Basic)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Home tab, in the Drawing group, clickShapes, and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle.Select the rectangle. Under DrawingTools, on theFormat tab, in the Size group, do the following:In the Shape Height box, enter 4.55”.In the Shape Width box, enter 8”.On the Home tab, in the bottom corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid fill. Click the button next to Color, and then under Theme Colors click Black, Text 1 (top row, second option from the left).Also in the Format Shape dialog box, in the left pane, click Line Color. In the Line Color pane, click Solid line, click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 35% (third row, second option from the left).Also in the Format Shape dialog box, in the left pane, click Line Style, and then do the following in the Line Style pane: In the Width box, enter 20 pt.In the Cap type list, select Flat.In the Join type list, select Miter.Also in the Format Shape dialog box, in the left pane, click Shadow.In the Shadow pane, click the button next to Presets, and then under Perspective click Perspective Diagonal Upper Right (first row, second option from the left).Also in the Format Shape dialog box, in the left pane, click 3-D Format, and then do the following in the 3-D Format pane:Under Bevel, click the button next to Top, and then under Bevel click Hard Edge (third row, third option from the left). Next to Top, in the Width box, enter 27 pt, and in the Height box, enter 5.5 pt. Under Depth, click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 35% (third row, second option from the left). In the Depth box, enter 40 pt. Also in the Format Shape dialog box, in the left pane, click 3-DRotation, and then do the following in the 3-DRotation pane: Click the button next to Presets, and then under Perspective, click Perspective Contrasting Left (second row, fourth option from the left).In the X box, enter 20⁰.In the Y box, enter 9.3⁰.In the Z box, enter 358⁰.In the Perspective box, enter 45⁰.Click Close to close the dialog box.On the slide, drag the rectangle slightly to the left to position it in the middle of the slide. On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture, and then click Insert.On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 4.11” and the Width box is set to 7.3”. Crop the picture on the Crop tab by entering values into the boxes under Picture Position and Crop Position. Under DrawingTools, on the Format tab, in the PictureStyles group, click the arrow next to PictureBorder, and then do the following:Under Theme Colors clickBlack, Text 1 (first row, second option from the left). Point to Weight, and then click3 pt.Under PictureTools, on the Format tab, in the bottom right corner of the PictureStyles group, click the Format Shape dialog box launcher. In the Format Picture dialog box, in the left pane, click 3-DRotation, and then do the following in the 3-DRotation pane:Click the button next to Presets, and then under Perspective click Perspective Contrasting Left (second row, fourth option from the left).In the X box, enter 20⁰.In the Y box, enter 9.3⁰.In the Z box, enter 358⁰.In the Perspective box, enter 45⁰.Select the picture. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Repeat this process one more time for a total of three pictures.NOTE: You can do this procedure with as many pictures as you want. This article uses three for purposes of demonstration.Select the second picture and repeat steps 12-14. Do this for each picture that you have added.Press and hold CTRL, and then select all three pictures on the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and repeat to do each of the following:Click Align Slide.Click Align Middle.Click Align Center.Drag the group of three pictures into the middle of the rectangle (picture frame). TIP: You might find it easiest to position the pictures precisely in the frame rectangle by selecting a picture, holding down the CTRL key and using the keyboard direction arrows.To reproduce the animation effects on this slide, do the following:On the Home tab, in the Editing group, click Select, and then click SelectionPane.On the Animations tab, in the Animation group, click Animation Pane.In the SelectionandVisibility pane, select the first picture and do the following:On the Animations tab, in the Advanced Animation group, click Add Animation, then under Exit, click Fade, and then click OK. In the Animation Pane, click the arrow at the picture’s animation effect and click Timing, then in the Fade dialog box, do the following:In the Start box, click After Previous.In the Delay box, enter 0.5.In the Duration box, click 2 seconds (Medium).Repeat steps 1 through 3 for the other pictures. TIP: If all pictures are assigned the Exit animation, the ending image on the slide will be blank. To prevent this, do not assign the Exit animation effect to the final picture.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, on the Fill tab, do the following:Select Gradient fill.In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left). Under Gradient stops, click Add or Remove until two stops appear on the slider.Select a stop on the slider, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 35% (fifth row, first option from the left).Select the other stop on the slider, and then do the following: In the Stop position box, enter 54%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 15% (fifth row, second option from the left).
- Animated picture circles in and shrinks with title(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in theSlides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture. In the InsertPicture dialog box, select a picture, and then click Insert.On the slide, select the picture. Under PictureTools, on the Format tab, in the Size group, click the arrow under Crop, point to Crop to Shape, and then under BasicShapes click Oval (first row, first option from the left).Select the picture-filled oval. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 6” and the widthis set to 6”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Select the picture-filled oval. On the Home tab, in the Drawing group, click Arrange, and then do the following:Point to Align, and then click Align to Slide.Point to Align, and then click Align Center.Point to Align, and then click Align Middle.Also in the Format Picture dialog box, click Glow and Soft Edges in the left pane, and then, in the Glow and Soft Edges pane, do the following:Click the button next to Presets, and then click Blue, 18 pt glow, Accent color 1, (fourth row, first option from the left).Click the button next to Color, and then under ThemeColors click White, Background 1 (first row, first option from the left).Also in the Format Picture dialog box, click Shadow in the left pane, and then, in the Shadow pane, do the following:Click the button next to Presets, and then, under Inner, click InsideDiagonalBottomLeft (third row, first option from the left), In the Transparency box, enter 50%.In the Blur box, enter 8 pt.In the Angle box, enter 135°.In the Distance box, enter 8 pt.On the Insert tab, in the Text group, click TextBox. On the slide, drag to draw a text box.Enter text, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, select Candara.In the FontSize box, enter 30.Click the arrow next to FontColor, and then click Black, Text 1, Lighter 25% (fourth row, second option from the left).On the Home tab, in the Paragraph group, click AlignTextLeft.Under Drawing Tools, in the Format tab, in the Size group, and enter 3.77 into the Width box.On the slide, select the text box. Under DrawingTools, on the Format tab, in the WordArt Styles group, click TextEffects, point to Reflection, and then under ReflectionVariations click TightReflection, touching (first row, first option from the left).Drag the text box onto the right half of the slide.With the text box still selected, on the Home tab, in the Drawing group, click Arrange, and then do the following:Point to Align, and then click Align to Slide.Point to Align, and then click Align Right.Point to Align, and then click Align Middle.Click Send to Back. To reproduce the animation effects on this slide, do the following:On the Animations tab, in the AdvancedAnimation group, click AddAnimation, and then under Entrance click Wheel.On the Animations tab, in the Timing group, in the Start list, select WithPrevious.On the Animations tab, in the Timing group, in the Duration box, enter 2. On the Animations tab, in the Animation group, click EffectOptions, and then click One Spoke.On the Animations tab, in the AdvancedAnimation group, click AddAnimation, and then under Entrance click Zoom.On the Animations tab, in the Timing group, in the Start list, select WithPrevious.On the Animations tab, in the Timing group, in the Duration box, enter 2. On the Animations tab, in the AdvancedAnimation group, click AddAnimation, and then under Emphasis click Grow/Shrink.On the Animations tab, in the Animation group, click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, do the following:On the Effect tab, under Settings, do the following:In the Size list, in the Custom box, enter 95%, and then press ENTER.Enter 0.15 in the SmoothStart box.Enter 0.15 in the SmoothEnd box.Select Auto-reverse.On the Timing tab, do the following: In the Start list, select AfterPrevious. In the Speed box, enter 0.3 seconds. On the Animations tab, in the AdvancedAnimation group, click AddAnimation, and then under Emphasis click Grow/Shrink.On the Animations tab, in the Timing group, in the Start list, select After Previous.On the Animations tab, in the Timing group, in the Duration box, enter 2. On the Animations tab, in the Animation group, click EffectOptions, and then click Smaller.On the Animations tab, in the AdvancedAnimation group, click AddAnimation, and then under Motion Paths click Lines.On the Animations tab, in the Timing group, in the Start list, select WithPrevious.On the Animations tab, in the Timing group, in the Duration box, enter 2. On the Animations tab, in the Animation group, click EffectOptions, and then click Left.On the slide, select the text box. On the Animations tab, in the AdvancedAnimation group, click AddAnimation, and then under Entrance click Fade.On the Animations tab, in the Timing group, in the Start list, select WithPrevious.On the Animations tab, in the Timing group, in the Duration box, enter 1. On the Animations tab, in the Timing group, in the Delay box, enter 1.5.On the Animations tab, in the AdvancedAnimation group, click AddAnimation, and then under Motion Paths click Lines.On the Animations tab, in the Timing group, in the Start list, select WithPrevious.On the Animations tab, in the Timing group, in the Duration box, enter 1. On the Animations tab, in the Animation group, click EffectOptions, and then click Left.On the Animations tab, in the Animation group, click EffectOptions, and then click Reverse Path Direction.To reproduce the rectangle on this slide, do the following: On the Home tab, in theDrawing group, clickShapes, and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle.Select the rectangle.Under DrawingTools, on the Format tab, in the Size group, do the following:In the ShapeHeight box, enter 1.54”.In theShapeWidth box, enter 10”.Under DrawingTools, on theFormat tab, in the ShapeStyles group, click the arrow next to ShapeOutline, and then click NoOutline.Under DrawingTools, on the Format tab, in the ShapeStyles group, click the FormatShape dialog box launcher. In the Format Shape dialog box, clickFill in the left pane, selectGradientfill in the Fill pane, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).In the Transparency box, enter 88%. Select the next stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).In the Transparency box, enter 43%. On the Home tab, in the Drawinggroup, click Arrange, and then do the following:Point to Align, and then click Align to Slide. Point to Align, and then clickAlignMiddle.Point to Align, and then clickAlignCenter.Click Send to Back. To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.Click the button next to Direction, and then click From Center (third option from the left).Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Select the next stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 50% (second row, second option from the left).
- Animated picture changes during motion path(Advanced)To reproduce the first picture effect on this slide, do the following:On the Home tab, in the Slides group, click Layout and then click Blank. On the Insert tab, in the Images group, click Picture. In the Insert Picture dialog box, select a picture, and then click Insert. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the picture as needed so that the height is set to 2” and the width is set to 2”. To crop the picture, click Crop in the left pane, and in the Crop pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the Size pane, under Size and rotate, enter values into the Height and Width boxes.Also in the Format Picture dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line, click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Also in the Format Picture dialog box, click Line Style in the left pane, and then in the Line Style pane, in the Width box, enter 1.5 pt. Also in the Format Picture dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets, and then under Outer click Offset Center (second row, second option from the left). On the slide, select the picture. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade.Also on the Animations tab, in the Timing group, do the following:In the Start list, select With Previous.In the Duration list, select 1.00 seconds.Also on the Animations tab, in the Advanced Animation group, click Add Animation, and then under Motion Paths click Lines.Also on the Animations tab, in the Animation group, click Effect Options, and then click Right.Also on the Animations tab, in the Timing group, do the following:In the Start list, select With PreviousIn the Duration box, enter 10.00 seconds.On the slide, select the motion path. Press and hold SHIFT to constrain the path to a straight, horizontal line, and then drag the right adjustment handle to the right, stopping approximately 1.5” left of the right edge of the slide. (Note: On the View tab, in the Show/Hide group, select Ruler to measure approximately where the endpoint is on the slide.)To reproduce the other pictures on this slide, do the following:Select the picture. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate. Repeat this process for a total of four duplicate pictures. Select a duplicate picture. Under Picture Tools, on the Format tab, in the Adjust group, click Change Picture. In the Insert Picture dialog box, select a new picture, and then click Insert. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcherIn the Format Picture dialog box, resize or crop the picture as needed so that the height is set to 2” and the width is set to 2”. To crop the picture, click Crop in the left pane, and in the Crop pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the Size pane, under Size and rotate, enter values into the Height and Width boxes.Repeat steps 2-4 for the other duplicate pictures. To reproduce the other animation effects on this slide, do the following:On the Animations tab, in the Advanced Animation group, click Animation Pane.In the Animation Pane, select the third animation effect (fade effect for the second picture). On the Animations tab, in the Timing group, in the Delay box, enter 2.5. In the Animation Pane, select the fifth animation effect (fade effect for the third picture). On the Animations tab, in the Timing group, in the Delay box, enter 5. In the Animation Pane, select the seventh animation effect (fade effect for the fourth picture). On the Animations tab, in the Timing group, in the Delay box, enter 7.5. On the slide, press and hold SHIFT and select all four pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align Selected Objects.Click Align Center. Click Align Middle. Drag the pictures into the top left corner of the slide. To reproduce the background effects on this slide, do the following:On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 3.42”.In the Shape Width box, enter 10”.Under DrawingTools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the LineColor pane, select No line. Also in the Format Shape dialog box, click Fill in the left pane, in the Fill pane, select Gradient fill, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left).Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select the first stop in the slider, and then do the following:In the Position box, enter 1%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 94, Green: 156, Blue: 198.In the Transparency box, enter 60%.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 94, Green: 156, Blue: 198.In the Transparency box, enter 90%.On the slide, drag the rectangle vertically to position it just above the middle of the slide. On the Home tab, in the Drawing group, click Arrange, and then do the following:Point to Align, and then click Align to Slide.Point to Align, and then click Align Center.Click Send to Back. Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, in the Fill pane, select Gradient fill,and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left)In the Angle box, enter 90⁰.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select the first stop in the slider, and then do the following:In the Position box, enter 70%.Click the button next to Color, and then click White, Background 1, Darker 5% (second row, first option from the left).Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then click White, Background 1, Darker 25% (fourth row, first option from the left).