hope this will help you for presentations

1. Submitted by:Sania correya

2. WHAT IS LI-FI?
 Li-Fi is the transmission of data through
illumination by taking the fiber out of fiber
optics by sending data through a LED light
bulb.
 This varies in intensity faster than human
eye can follow.
 It is the fast and cheap wireless
communication system which is optical
which is optical version of the Wi-Fi.

4. CONSTRUCTION OF LI-FI..
Li-Fi product consists of 4 primary sub-
assemblies:
 Bulb
 RF power amplifier circuit (PA)
 Printed Circuit Board (PCB)
 enclosure

5. CONSTRUCTION OF LI-FI
 The PCB controls the electric inputs and
outputs of the lamp and houses the
microcontroller used to manage different
lamp functions.
 An RF (Radio-Frequency) signal is generated
by the solid-state PA and is guided into an
electronic field about the bulb.

6. CONSTRUCTION OF LI-FI
 The high concentration of energy in the
electric field vaporizes the contents of the
bulb to a plasma state at the bulb’s center;
this controlled plasma generates an intense
source of light.
 All of these sub-assemblies are contained in
an aluminum enclosure.

7. HOW LI-FI WORKS..
Its working is much simply explained as
follows:
 If the LED is on, the digital 1 is transmitted.
 And if it is off, the digital 0 is transmitted.
 It is possible to encode data in the light by
varying the rate at which the LEDs flicker on
and off to give different strings of 1s and 0s.

9. COMPARISON BETWEEN LI-FI & WI-FI..
 Li- Fi is a term of one used to describe
visible light communication technology
applied to high speed wireless
communication.
 It acquires this name due to the similarity to
Wi-Fi, only using light instead of radio.

10. COMPARISON BETWEEN LI-FI & WI-FI..
 Wi-Fi is great for general wireless coverage
within buildings and Li-Fi is ideal for high
density wireless data coverage in confined
area and for relieving radio interference
issues, so the two technologies can be
considered complimentary.

11. COMPARISON BETWEEN LI-FI & CURRENT
TECHNOLOGY..
Technology Speed Data
density
Wireless (current)
 Wi-Fi-IEEE 150Mbps *
 802.11n
 Bluetooth 3Mbps *
 IrDA 4Mbps ***

12. COMPARISON BETWEEN LI-FI & CURRENT
TECHNOLOGY..
Technology Speed Data
density
Wireless (future)
 Wi-Gig 2Gbps **
 Giga-IR 1Gbps ***
 Li-Fi 1Gbps ****

13. HOW LI-FI IS DIFFERENT?
 Li-Fi technology is based on LEDs for the
transfer of data.
 The transfer of the data can be with the help
of all kind of light i.e., Light may be Invisible,
Ultraviolet or Visible part of spectrum.
 The speed of the internet is incredibly high
and the user everything in just a few
minutes.

15. APPLICATION AREA OF LI-FI TECHNOLOGY:
Some of the applications of Li-Fi are given
below:
 Airways
 Green information technology
 Free from frequency bandwidth problem
 Increase communication safety
 Multi user communication
 Lightings points used as hotspot
 Smarter power plants
 Under sea Awesomeness

16. USES ON APPLICATIONS:
 Can be safely used on plains because it
does not interfere with radio equipments.
 Li-Fi never gives side effect on any living
thing .
 It does not require any band width
spectrum.
 Due to VLC, the node or terminal attach to
our network is visible to host of network.
 Li-Fi supports the broadcasting of
network.

17. USES ON APPLICATIONS:
 Li-Fi could offers safe, abundant
connectivity for all various of sensitive
locations.
 Can be used underwater without radio
interference because salt conducts
electricity.

18. ADVANTAGES OF LI-FI..
 It is impossible to achieve more than
10Gbps, theoretically allowing a high-
definition film to be downloaded in 30 sec.
 Mostly powered by LEDs so it is cost
efficient
 Transmission of data is fast and easy.

19. CONCLUSION
 The concept of Li-Fi is currently attracting
a great deal of interest, not least because
it may offer a genuine and efficient
alternative to radio-based wireless.
 As a growing number of people and their
devices access wireless internet, the air
waves are becoming increasingly
clogged, making it more and more
difficult to get a reliable, high-speed
signal.