After the manufacturing of the drug, it is essential that these should be stored properly. The stability of drug during it’s storage depend on so many factor and proper packaging is one of them. The pharmaceutical products are in direct contact with the container and closures. So improper packaging and poor quality of container may lead to deterioration of the product.
Russian Call Girls in Chennai Pallavi 9907093804 Independent Call Girls Servi...
Glass
1. 1
Mr. Sagar Kishor Savale
[Department of Pharmaceutics]
avengersagar16@gmail.com
2015-2016
Department of Pharmacy (Pharmaceutics) | Sagar savale
2. Introduction
Advantages
Disadvantages
Types of glass
Composition
Additives
Manufacturing process
Evaluation test
Conclusion
Reference
2
3. After the manufacturing of the drug, it is essential that
these should be stored properly. The stability of drug
during it’s storage depend on so many factor and proper
packaging is one of them. The pharmaceutical
products are in direct contact with the container and
closures. So improper packaging and poor quality of
container may lead to deterioration of the product.
3
4. DEFINITION:
Pharmaceutical container has been defined as
a device that holds the drug and it may or may not be in
direct contact with the pharmaceutical preparation.
Types of packaging
1. Primary packaging
2. Secondary packaging
4
5. They are transparent.
They can withstand the variation in temperature and
pressure during sterilization.
they can be sealed hermetically or by removable
closers.
They can protect the photosensitive medicaments from
light during their storage.
They are neutral after proper treatment.
They are impermeable to moisture and other gases.
They do not deteriorate with age
5
6. Glass is fragile, so its containers are easily broken
when dropped or knocked.
Glass containers are heavy.
Glass containers may release alkali to aqueous
preparation.
6
7. Glass is composed of -
sand (SiO2),
soda ash(Na2CO3),
lime stone (CaCO3) and
cullet.
Along with it traces of other materials are added to
impart clarity and hardness. lead provide brilliance and
clarity while alumina is common addition to increase
hardness and durability.
7
9. chemicals Imparting colour
Iron oxide Green
Manganese oxide Deep amber
Cobalt oxide Deep blue
Carbon oxide Brown
Sulphar compound Amber
9
10. 1. TYPE I or Highly resistance borosilicate glass
2. TYPE II or Treated soda lime glass
3. TYPE III or Soda lime glass
4. TYPE IV or General purpose soda lime glass
10
11. TYPE OF GLASS PROPERTIES SUITABILITY
Type I Alkalinity is removed Parenteral preparation
Type II Treating the surface of type
III glass by sulphur dioxide
Acidic buffered solution
Type III It is alkaline glass Dry powder and oleaginous
solution
Type IV Similar in composition to
that of type III glass
Non parenteral application
11
12. 1) Blow molding of glass container.
i) Blow-Blow molding of glass.
ii) Press-Blow molding of glass.
2) Annealing and treating-glass finishing.
12
13. Water attack test.
Powdered glass test.
Arsenic limit test.
Light transmission test
13
15. Capacity of container Vol. of titrant consumed
by type II glass
Vol. of titrant consumed
by type III glass
1-2 1.8 17.6
2-5 1.3 13.2
5-10 1.0 10.2
10-20 0.8 8.1
20-50 0.6 6.1
50-100 0.5 4.8
100-200 0.4 3.8
200-500 0.3 2.9
More than 500 0.2 2.2
15
16. Types of glass Amt. of titrant consumed
Type I 0.1mL
Type III 8.5mL
Type IV 15mL
16
17. Maximum % light transmission at any wavelength
between 290-450nm.
Size in ml. Flamed sealed
container
Closer sealed
container
1 25 25
2 20 20
5 15 15
10 13 13
20 12 12
50 10 10
17
18. Glass is one of the best primary packing
material for parentral preparation, because-
It is transparent, by which we can easily visualize the
preparation.
For multiple dose preparation, glass container are more
preferably used.
We can protect the product from sunlight or U.V. rays
It has least possibility to interact with preparation.
18
19. 1.Remington, The Science and Practice of Pharmacy, 21st ed;
Vol-I, P.809
2.Edward BJ, Pharmaceutical Packaging Handbook, Informa
healthcare, New York, London, P.195,297-303.
3.Jain NK, Pharmaceutical Product Development, CBS Publisher
and distributor Pvt.Ltd. 1st ed- 2006: P.167
4.United State Pharmacopoeia and National Formulary, United
States Pharmacopoeial Convention, INC, Asian ed-2004; P.
2288-2290.
5.INDIAN PHARMACOPOEIA 1996, Govt. of India, ministry
of health & family welfare, Published by Indian
Pharmacopoeial Commission, Vol-II, Ghaziabad, P.A -127.
19