Industries always undergo the challenge to effectively treat wastewater as it is necessary to prevent water pollution. As the regulations and compliance strictly prohibit discharge of harmful pollutants to the environment, it becomes essential to treat wastewater.

1. What Is an Industrial Water Treatment System and
How does It Work?
Industries always undergo the challenge to effectively treat wastewater
as it is necessary to prevent water pollution. As the regulations and
compliance strictly prohibit discharge of harmful pollutants to the
environment, it becomes essential to treat wastewater. Setting up
an Industrial Wastewater Treatment System can solve the environmental
crisis, either by reusing water or safely discharging it back to the
environment. Further, we will discuss about how the industrial
wastewater treatment works in order to help you choose the right
solution for your facility.
How it Works?
The design and construction of Wastewater Treatment Plant will depend
on the water composition and compliance regulations.
Listed below are important steps in wastewater treatment.
Clarification
Clarification is usually the first step in wastewater treatment process. It
happens through a series of steps from precipitating metals, silica and
removing suspended solids. Based on the composition of the wastewater,
the clarification process can be a series of reaction tanks treated with
chemical addition, coagulation, sedimentation and followed by filtration.
Disinfection
Pathogens like bacteria, fungi and viruses present in wastewater can be a
major health hazard. It can result in severe sickness, digestive disorders
or even death. Therefore, industrial wastewater treatment should ensure
to remove the harmful microorganisms before releasing into the
environment.

2. Softening
Lime softening can reduce the sulfate content in the stream through
addition of lime or lime soda. The effect of the lime soda raises the pH
level resulting in harmful constituents precipitating out of the solution.
Special Processes
Often times, each industrial wastewater treatment plant design needs a
specialized process. Since, the wastewater streams are complex in
nature and variable from each facility. In such scenarios, special process
is the need of the hour to fully meet the wastewater treatment
standards.
Distribution
In the last step of wastewater treatment, the water is routed back for
reuse to the facility or discharged back to the environment or sewer,
complying with environmental regulations.
If this blog served to be insightful, please share your comments.