1. Vibration Test
Confirms to various international standards
Transport Journey Simulator
(Vibration Tester)
Vibration Tester or Transport Journey Simulator is designed to test & evaluate the transport worthiness of
filled cartons / jars / drums / containers as per international specifications.
This machine effectively replicates the road journey and its effect on the package and its contents.
You can now simulate a thousands of kilometers of road journey in just a few hours and that too in the
comfort of your own laboratory.
Load Capacity : 250 / 500 / 1000 Kgs
Standard Platform Size : 1200 x 800 mm
Small Platform Size : 800 x 600 mm
Large Platform Size : 1250 x 1250 mm
Note : Custom sizes also available.
Suspension System : Automotive Type
Support Bearings : Pedestal Type
Table Top Throw : 25 mm
Amplitude : 12.5 mm
Speed / Frequency : 2 Hz (120 RPM) fixed.
or 3 Hz (180 RPM) fixed.
or 2-3 Hz (120 - 180 RPM) with Variable Pully (Mechanical Variator)
or 1-3 Hz (120 - 180 RPM) with Variable Frequency Drive (V.F.D.)
Power : 230 V AC or 415 V AC
ELECTRICAL / ELECTRONICS :
1 Digital Jerk Counter with Preset facility for Auto Stop
2 RPM Indicator
3 Power Indicator
4 Push Buttons – OFF, ON
5 EMERGENCY OFF Switch.
6 M.C.B. / Mains Isolator
Optional :
Shock Monitor
or Shock Logger

2. Comparison of various model of Vibration Tester - 250X series : (250 Kg capacity)
Sr. Feature Model Model Model Model Model
2502-F 2503-F 2503-VP 2503-VFD 2505-VFD
1 Speed Change No Speed Change. Mechanical Electronic Variation using
Mechanism Fixed Speed Only. Variation using Variable Frequency Drive
Variable Pulley
Mechanism
2 Speed Range 120 RPM 180 RPM 120 - 180 RPM 60 - 180 RPM 60 - 300 RPM
(2 Hz) (3 Hz) (2-3 Hz) (1-3 Hz) (1-5 Hz)
3 Start Immediate Immediate Soft-Start logic.
Slowly increases speed to desired
level.
4 Overload Trip Relay / MCB Trip Relay / MCB Trip Relay for Physical Overload
Protection to protection.
motor. VFD drive also monitors the load
on the motor and logically turns
off the motor in case of over-
load. Hence, Double protection.
5 Speed Change Speed cannot be changed The operator has VFD controls are provided on the
Operation in this model. to rotate a screw / control panel itself.
knob at the back
of the machine. The operator has to rotate a
This will change potentiometer knob.
the diameter of The change in speed is
the pulley and immediately visible on the RPM
hence the speed Indicator on the panel itself.
of the machine
will change. Time required to change speed by
Single operator approx : 30
Time required: 5 seconds.
– 10 mins.
6 Motor exposure The Motor is mounted The Motor is The Motor is mounted within the
within the machine frame. mounted on a machine frame. No parts protrude
No parts protrude outside rigid platform outside the machine body (except
the machine body (except which extends the motor’s shaft-pulley).
the motor’s shaft-pulley). outside the
machine body. This system consumes less
This system consumes less utilize the space. working space and is more
working space and is more aesthetic.
aesthetic.