Human Factors of XR: Using Human Factors to Design XR Systems
14
1. Put glue inside of hole~Use Glue & Wooden mallet to join the dowels~ Thursday 12/05/11<br />Finished putting dowelsHit the dowel with wooden hammer-5715005842000-5721353937635-5721352032635-571500127000 Today I used glue and wooden mallet to put forth 18 dowels. I had 20 dowels so 2 dowels were left. I put glue inside of holes and I put a dowel inside of hole. After this I just hit the dowel with wooden hammer. I finished put forth 18 dowels for pig’s face. I had four balls for each color, which is blue, light green, red and yellow. I just put whole balls, and I felt it’s too many balls. So I tool one ball for each color. So there are 3 balls for each color. The next thing is that most difficult part (I took video during this difficult part, you can see how is difficult in the video), which is I need to put pig’s back together. So I put glue inside of pig’s back’s holes. And I got wet cloth for wipe glue. First, Mr. Anderson was helping me to stick pig’s back. But he said we need person to help us. So Michel helped me to do this. But still can’t stick together. This is because some dowels are short then others and some dowels are taller than others. It was so hard. I haven’t stick my pig’s back yet. Mr. Anderson said ‘ we are going to fix next class.’ I need to shave dowels. Like use sharpener to shave dowels. I am not sure about more detail. So NEXT class I need to ask what am I -685800127000doing for dowels. (More detail about shaves dowels) I don’t know if it’s take long time, but if I finished shave dowels before end of class, I will stick together, and maybe I will use clay for hide the pig’s back’s holes, and I need to paint again.<br />The balls inside!<br />-2654300381000Emotion-I felt hopeless when Mr. Anderson was helping me to stick together. Even Mr. Anderson can’t fix it. So I was kind of worried that if I can make this toy.<br />AOI- Community and Service<br />Stick together-26295351016000Glue inside of holes Today for my project, my friend helped me with stick pig’s back and dowels together. Michel helped me with check the position of dowels. (Are the dowels right position?). Also Ding helped me with how should I fix my toy. It was so helpful for me. <br />