1. Electric Machine – II
EE 501
Single phase induction motor
Single phaseAC series motor (universal motor)
Synchronous machine
Generator (alternator)
Motor
Special machines
2. Course outcomes (CO)
After successful completion of this course, the students would be able to:
C 501.1 Use concepts in trigonometry, complex algebra, phasor operations and
principles of electromagnetism to find correct solutions to electrical
machine performance questions.
C501.2 Select proper materials and methods for design and construction of
electrical machines within the realm of manufacturing, economic,
performance, efficiency and environmental constraints.
C501.3 Use modeling/simulation parameters with standard equivalent circuit
models to predict correctly the expected performance of various
general-purpose electrical machines.
C501.4 Compare accepted standards and guidelines to select appropriate
electrical machines to meet specified performance requirements and
choose the scope of applicability of various types of electrical machines
in real life multi-disciplinary usages.
C501.5 Demonstrate an understanding of the fundamental control practices
associated with rotating machines.
C501.6 Set up testing strategies to evaluate performance characteristics of
electrical machines.
Basic concepts
Construction & operation
Performance evaluation
Application
Control
Testing
4. ILOs – Day1
Recapitulate 3-ph IM operation
Understand 2-ph IM operation
Generalize the concept of producing RMF
List the basic applications of 1-ph IM
Compare between 1-ph IM and poly-phase IM
5. Single phase induction motors
Three-phase induction motors
Very popular in industries for medium power applications (>5 kW)
But, domestic and commercial (shops) use single phase supply
So, single phase induction motors are used
Single phase induction motors for low power applications
cost-effectiveness
Ruggedness
Low maintenance requirements
Loads such as fan, pump, blowers, compressors etc.
6. Recap of 3-phase induction motors
In 3-phase induction machine, three windings are placed
around the stator near the air gap.
These windings are physically apart by 1200 (electrical
degrees) in space.
When a 3-phase supply voltage is applied to this 3-phase
winding, a magnetic field is developed in the air gap.
Under balanced condition, the magnetic field will rotate at a
constant speed around the air gap (RMF).
The rotor conductors will experience change in flux linkage due
to the RMF.
Under this action, the rotor will start to rotate and will continue
to rotate in the same direction as the stator RMF
7. Recap of 3-phase induction motors
Thus, in summary, a 3-phase induction motor has
inherent starting as well as running torque that can start
the motor by itself and continue running as soon as the
3-phase supply is switched on.
8. Activity 1
Thus, in summary, a 3-phase induction motor has
inherent starting as well as running torque that can
start the motor by itself and continue running as soon as
the 3-phase supply is switched on.
starting running
3-phase supply
itself
9. RMF under unbalanced condition
In practical cases, it is very rare that the 3-phase supply
system is totally balanced.
What do you mean by a balanced 3-phase system?
Three signals ( voltage or current)
Same magnitude (RMS value)
Phase difference 1200 among them
10. RMF under unbalanced condition
Under unbalanced condition
Magnitude of the three phase voltages may be unequal
They may not be exactly 1200 apart
Then also RMF will be developed and motor will run.
RMF strength not constant
RMF speed also not constant
Such an unbalanced system may cause speed and torque
oscillations
Degraded motor performance and reduced motor capacity
and efficiency.
Q) In an unbalanced 3-phase system, ∠RY=1200, ∠YB=1160, then
∠BR = ?
(3600 – 1200 – 1160) = 1240
Q)Will there be any RMF?
Q)Will the motor run?
11. RMF under unbalanced condition
Theoretically speaking, when motor performance is not of
prime importance,
Any three voltages
At any magnitude other than zero
Any phase difference other than 00
Will be able to create an RMF and the motor will run, though
with much deteriorated performance.
12. 2-phase induction motor
Two coils in stator
Supplied from 2-phase voltage source
How many terminals will come out of the motor?
13. 2-phase induction motor
The stator has two
separate windings
physically spaced at 900
(electrical degrees) with
respect to each other.
The current supplied at
these two coils are
mutually at 900 (time
phase) to each other.
How do you know these two signals are 900 apart?
14. Instant (1)
A is dot
A’ is cross
Nothing in B-B’
• A is positive (dot)
• B is zero
NS
Resultant flux axis
Why is it so?WhenA is dotA’ is cross??
15. Instant (2)
A is dot
A’ is cross
B is dot
B’ is cross
• A is positive (dot)
• B is also positive (dot)
N
S
Resultant flux axis
N
16. Instant (3)
B is dot
B’ is cross
Nothing inA-A’
• A is zero
• B is positive (dot)
S
Resultant flux axis
N
17. Instant (4)
A is cross
A’ is dot
B is dot
B’ is cross
• A is negative (cross)
• B is positive (dot)
S
Resultant
flux axis
N
18. RMF
• Thus, as time progresses,
the resultant magnetic
field rotates in space
• Hence RMF is created by
stator
• So, the rotor starts to
rotate in the same
direction as the RMF
19. 2-phase induction motor
In ideal case, with the two supply voltages being of same
magnitude and at 900 in time phase with respect to each
other, the magnitude of RMF remains constant and the
motor rotates at steady speed.
20. 2-phase induction motor
In practical cases
The 2-phase supply voltages may not be of exactly the same
amplitude
They may not be in exact phase quadrature
Then also RMF is developed
The motor will run, but
at less speed
low capacity
with speed and torque ripples (oscillations)
21. Thus….
The basic requirement for generating a rotating magnetic
field (RMF) in the air gap of a poly-phase motor is that
There must be more than one magnetic fields present
with certain time-phase difference
and space-phase difference between themselves
In 3-phase and 2-phase induction motors, this is achieved by
putting more than one winding in the stator
supplying those winding with a poly-phase supply
22. Single phase induction motor
A large number of fractional horse power (HP)AC motors are
designed for operation with single phase supply
As in case of household pumps and fans, the supply is only single
phase
So we can’t use 3-phase or 2-phase induction motors
The option is to use single phase induction motors that can be run
from the single phase supply that is available
23. Single phase induction motor - construction
The first difference between a 3-phase and a single-phase
induction motor is in terms of physical size of the machine
Three-phase induction motors are big in size
Single phase induction motors are often of much smaller
size and rating
Sometimes even 100 times smaller
24. Single phase induction motor - construction
However, the basic constructional features and materials
almost remain same for both the two.
Stator:
Stacks of laminated steel sheets with tooth and slot
3-phase motor has three coils, but 1-ph motor has only one main
coil
Rotor:
Squirrel cage type – exactly similar for 3-phase and 1-phase
motors
26. Activity
State –True or False
3-phase IM uses 3-phase supply to produce RMF
In 3-phase supply given to a 3-ph star connected IM, if one of
the supply lines gets open, then the motor will continue to
rotate like a 2-phase motor, though not smoothly
Speed of RMF in a 3-ph or 2-ph IM depends on frequency of
supply voltage
3-ph IM has 3 supply lines, but single phase IM has only one
supply line