8. 12daz File
• 12da – called 12d Archive instead of 12d Ascii
• 12daz - Zipped 12da
• Writing 12daz
• Reading 12daz
• Tick on 12da Writer to write Project Description
out as comments at top of 12da file
9. Drag and Drop
• File Box
• .12daz, .12da
• .dat
• .chain
• .mtf & mapfile
• .slx & .4do
• .project
• .dwg, .dxf
• Drag and drop from email attachments
11. Sharing
• Local Caching of shared data
• Share manager – shows by project what
shares have been made and what shares are
available
• Sharing Map Files – now have Map files for
Models rather than just one global Sharing
map file
12. Linestyle.4d and Symbols.4d
• Subgroups in Linestyle.4d and Symbols.4d
Note – the linestyle/symbol names must still be unique
16. Pipes and Attributes ControlBars
• Pipe ControlBar – pipe justification,
diameter/width, height
• String Attributes ControlBar
• Both used with CAD string create options
• Values set by CAD Controlbar using Names.4d
17. Dimensions
• All associative
• Linear – horizontal, vertical, aligned, rotated
• Baseline & Continuous
• 2D Length
• Angle – 2 lines, 3 points
• Radius, Jogged Radius
• Diameter
• Area
• Drop point to segment
18. Dimensions
• Special Text Formats
Pre and post text
Units factor
Num decimals
Round off
If then else
Multiple units
24. Views
• For Plan View text for z-values, Point Ids etc
Extra text parameters allowed
Table modes Draw, Don’t draw, Ignore
• Clone a view
• View property sheet
• (x,y) shown for Section vw -like chainage, z-val
25. View Box
• MB in View Box
Pick string & fills in the View that the string is on
26. Model/Tin Box - Options
• Tin Popup
Tin Info
Edit
Retriangulate
• Model Popup
Clean
String info etc
27. Panels - General
• Moving the divider in tree controls – eg ppf’s
• Resizing of many panels & remembered in
SLX, DDX
• Arithmetic in an Integer Panel Field + - * /
28. Tins
• Number of tins in
Super Tin increased to 127
• Depth contour and
label function
• New uber tin - trimesh
29. General
• Demand loading of billboards & textures
• Exact 2d area for all strings (transitions, offset
transitions etc)
• XML Reports in many options
• 12d Usage Reports
• NZ GIS – quicker Linz Link hookup
30. Plan Area
• Utilities =>Measure =>Bearing/Distance
Plan area reported in panel for continuous mode
36. Chains 1
• Icons for turning command Active/Inactive
• Warning prompts tick box
• Warning if leaving a project and Chain still open
37. Chains 2
• Command name field moved down so fields
needed for auto name generation are filled in first
• Clicking on Command Name icon regenerates
default name
• Re-recording does not change the Command
Name
38. Chains 3
• Clicking on a Resolve command highlights the SA
• Recording an Apply Many
• Preview works for Functions
• Disable Delete Confirmation
• Copy and paste between chains
39. Chain Commands 1
Many additions and new commands
•New View Commands
Create a view giving screen positions
Maximize a view
Minimize a view
Restore view
Redraw a single view
Change view background colour
Dump the image of a view
40. • Title for Prompt
• Prompts come up at the same place
• Clear Output Window
• Write to Output Window
• Print chain parameters to Output Window
• Delete a function
• Delete all functions
Chain Commands 2
41. • Save a project
• Sleep
• Copy file
• Dump image of SLX of a panel
• Shell command has separate command line
Chain Commands 3
42. Chains Multi Select
Multi select for
• Delete
• Make Active/Inactive
• Move commands Up and Down
• Copy, Paste to after a selected command
43. Chains Parameters
• Chain Parameter Editor mods
• Icons for Parameter Types
• Comments & Search
• Set no longer needed
• Print chain parameters to Output Window
• Chain Parameters as Macro Arguments
• Passing parameter file as a Chain argument
44. Tunnels and Tins
Some Problems with Tins and Tunnels
• Using tins to manage tunnel surveys is not
possible
• Vertical or Over vertical faces are not in tins
• Resultant height difference measurements to
tin surface are wrong
45. New 12d Object - Trimesh
The Trimesh extends the concept of triangles forming a tin
which is 2.5D, to triangles modelling the surface of 3D
objects such as tunnels or pavement layers
46. Tunnels, Large Culverts, Bridge Decks etc
Trimesh solids can be used to define any surface
• Tunnel surface conformance
• Surface thickness measurements
• Existing Points vs Surveyed points managed
48. • Tunnel profiles defined by offset & height
• Arcs are allowed
12d Tunnels
49. Profiles are applied to a Super Alignment
•Applied with 2D or 3D chainage
•Applied vertical or perpendicular (normal) to SA
•Can be translated in offset and height
•Can be rotated around the SA
Generating a Tunnel
50. For a tunnel, you can generate
•Profiles
•Strings
•Trimesh
Create Tunnel
51. For a tunnel, you can generate
•Profiles
•Strings
•Trimesh
Create Tunnel
65. Better Road Over Topping
• New weir types for sealed and gravel roads
• Uses stepped shapes and predefined
discharge coefficients
Drainage Dynamic
66. Catchments to Bypass
• Hydrograph flows applied to overland flow
strings – improved flooded width calcs
Drainage Dynamic
67. Green Ampt Infiltration Method
• Basin Infiltration, sand, sink holes
Drainage Dynamic
Manhole Data
68. RoadFlow Additions
• A second roughness via polygons
• Easily acquired Hydrograph results
Drainage 2D
69. Catchment Connections
• Catchment connection zones – large culverts
connecting to multiple cells
• Catchment flow lines – distribute a
hydrograph along a line
Drainage 2D
70. Point Clouds
• Point clouds – total rework for speed and flexibility
• Reading Single or multiple files
• Optional cartographic projection for files
• All readers have file rejection by polygon
• Point cloud is a string
71. Point Clouds Formats
• Read LAS (LIDAR, ALS)
• Read e57 (transfer format)
• Convert e57 to LAS
• Read Leica PTS and PTX format
• Convert Leica PTS and PTX to LAS
• Read SRTM format
• More formats to come
72. Point Clouds
• Categories supported
• Point colours supported
• Turning Categories on/off for point cloud
• Drawing, picking, triangulation, output etc restricted by categories
73. Point Cloud Edits
• Cloud Edits
Setting categories by tin colour
Copy LAS files by category (reduce number of points)
Delete points
Applying projections to cloud
More edits to come
• Set LAS Categories by tin colour
74. Point Cloud Drawing
• On Plan and Perspective view
Colour by Point colour
Colour by Categories
Colour by intensity as grey scale
Colour by string colour instead of Point colour
Toggle drawing on/off
75. Survey
• XML observations file - .12dSurvey file
– more flexible 12d Reduction Editor
– easier to produce other reports
– tree editor
• Trimble Job. XML to .12dSurvey file
• Leica.DBX to .12dSurvey file
• 64-bit Leica TPS support
• Ramdisk usage with Solid State Drives
76. Least Squares Network Adjustment
• Combined horizontal and vertical observations
• Disjoint networks in either horizontal or vertical
or both
• Free adjustment
77. There are Two Sides to 12d Field
• 12d Field – Setout
• 12d Field - Pickup
78. 12d Field Survey Equipment• Continued improvements to 12d Field Connectivity
• Motorised Total Stations
• Leica – 1100 -1200 – Viva Series – Nova
• Topcon – IS Series – 9000 – PS and QS Series
• Trimble Sitech SPS Series
(only with Trimble Tablet)
• GPS and GNSS
• All Brands of GPS and GNSS receivers
85. 12d Field Setout
• 12d Field Setout – Measurement Rounds
• Measurement rounds – direct to 12d Least Squares
86. 12d Field Pickup
Pickup
• Developed and Mature Menu Structure
• New on the fly SDR editing
• Multi functional Template 0ption
• Opcodes
• Favourites Bar
• Field message recording
• Full TPS instrument Management Live
• GNSS Live
• Survey post processing is almost nil
90. Super Alignment - General
• Reverse only the underlying geometry of a
Super Alignment
• Multiple transition types allowed in the one
Super Alignment
• Create/edit SA check for unique name
• More information in SA Info panel
• Intervals for SA report
91. Super Alignment - Solving
Markers to restrict the range of parts to solve
•Start marker
•End Marker
92. Super Alignment - Design
• Active flag and comment for custom
super/widening
• Speed dimension on profile of SA
• Complete widening shown in profile of SA
• Design table and part editor integration
93. Super Alignment – Named Parts
• Named position for computator points
• Named part list in the order of part index
• Check named part against others in same SA
• Same As for Named Part Box
94. Super Alignment - Diameter
• Diameter for Super Pipeline
• Lock VIP to HIP so the two move together in
plan. This allows HIP/VIP to act as a 3d vertex.
97. • Cadastral data to replace Deposited Plans
• Controlled XML format
• One source of truth and will replace submitting, or
receiving, deposited plans
• Implemented in NZ in 2002
• Now being implemented Vic, Qld and NSW
ePlan.XML
98. • Controlled XML format with localisation files for each
jurisdiction. For example Vic, Qld, NSW
ePlan.XML
105. • Segments are defined between Points
12d Model ePlan Data
106. • Parcels are closed sequences of Points
12d Model ePlan Data
107. In 12d Model, Parcels information includes
•Name, State,Class etc
•Misclosure
•Polygon area
•Check area
•Typed area
12d Model ePlan Data
108. Displayed data is user controlled
•Points, Point ID’s
•Bearings
•Distances
•Parcels
•Parcel areas
etc
12d Model ePlan Data
109. ePlan Network Data can be
•Validated against the ePlan XML schema
•Exported out as an ePlan.XML file ready for submission
12d Model ePlan Data
110. • Existing ePlan.XML files can be imported into 12d
In the future Deposited Plans will be supplied as ePlan.XML files instead of Tiff images so the data does not have to be reentered.
Existing ePlan.XML Files
111.
112. ADAC - Asset Design and As Constructed
• Vendor independent XML format – 68 Asset types
• ADAC.XML format controlled by IPWEA
• Designed for specific 3D data sets
• Survey accurate as built data
• One source of truth
• Already implemented, or being implemented, by many
Councils and Water authorities
• ADAC involves designers and surveyors
115. ADAC Geometry
Each ADAC Asset has a Geometry and what that
Geometry is is defined for each ADAC Asset.
ADAC Geometry is one of
•Point
•Polyline – some ADAC Assets allow arcs
•Polygon – some ADAC Assets allow arc
117. ADAC Asset Attributes
Each ADAC Asset has Attributes which are totally
defined for each ADAC Asset.
•The atomic ADAC Attributes are Integer, Real, Text
•ADAC Asset Attributes are Hierarchical (Tree)
•Some ADAC Asset Attributes are optional
•Many ADAC Assets have set choices
120. Authorities and ADAC
Each Authority will define
•Which ADAC Assets they require
•Which attributes are wanted for each required
ADAC Asset
•What the Geometry for the required ADAC Asset
represents
123. 12d Approach to ADAC
12d is not interested in just typing in ADAC data and
writing out an ADAC XML file
This is little more than a manual data collection exercise, performed at extra
expense, after the designs or as-built surveys are completed
124. 12d Approach to ADAC
12d is not interested in just typing in ADAC data and
writing out an ADAC XML file
This is little more than a manual data collection exercise, performed at extra
expense, after the designs or as-built surveys are completed
ADAC XML needs a cost effective, holistic solution
125. 12d ADAC Approach– Data Fidelity
• the ADAC Schema is to be completely reflected inside
12d Model so there is no data loss
126. 12d ADAC Approach – Data Reuse
• Maximise data reuse
• Minimise manual editing
127. 12d ADAC Approach – Round Trip
That is:
WRITE OUT an ADAC-XML file from 3d engineering data in 12d Model
and
READ IN an ADAC-XML file and construct 3d engineering data in 12d Model
• Round trip the ADAC data as 3d engineering data
128. Authorities Load into Databases
Eg GIS, Asset DB, 12d
Consultant
-Constructor
Authority
Engineering
Surveyor
Construction
Company
Civil Designer
Detail Surveyor
ADAC XML
File
129. 12d ADAC Approach – Integrated Work Flow
Groups having to provide ADAC data will be reluctant to do so if it involves
extra work for no extra fee.
130. 12d ADAC Approach – Integrated Work Flow
Groups having to provide ADAC data will be reluctant to do so if it involves
extra work for no extra fee.
So being able to integrate ADAC into their normal workflow is
essential for the acceptance of ADAC.
131. 12d ADAC Approach – Integrated Work Flow
• Within 12d Model, the collection of the ADAC data is
integrated into the normal design-construct-as-built work
flow
Groups having to provide ADAC data will be reluctant to do so if it involves
extra work for no extra fee.
So being able to integrate ADAC into their normal workflow is
essential for the acceptance of ADAC.
133. Demystifying ADAC using 12d
• 12d-ADAC is driven by the ADAC XML Schema
• A 12d Map File is used to mark 12d strings as ADAC assets
• As many ADAC asset attribute values as possible are
automatically taken from the 12d strings
For example – coordinates, lengths, pit sizes, pipes
• User attributes can be mapped to ADAC asset values
134. Prepared
Survey/Design
Data
Marking ADAC
Attributes with
12d Map File
12d-ADAC Work Flow
Mapped ADAC
Data
Synchronised
ADAC Data
ADAC XML File
Write Out
ADAC data
12d Design or
Survey from Field
Preparing
Data for
ADAC
Validate
Reports
Edit items
Create Header
ADAC Data
in 12d
Read In
ADAC Data ADAC
Data Ready to
Write out
Setting ADAC Attributes
from 12d String Geometry
and User Attributes
Creating ADAC
items by hand
135. Producing ADAC XML in 12d Model
• How a 12d surveyor produces an ADAC XML file
• How a 12d designer produces an ADAC XML file
136. Summarising the 12d ADAC Approach
• ADAC Data Fidelity
The ADAC Schema is completely contained in the 12d attribute structure and 12d geometry so there is no data loss
The 12d ADAC Editors and Validators are driven by the ADAC XSD to minimise implementation errors and
easily code with new ADAC Schemas
• Data is in 3D
• Round tripping - 12d supports both reading and writing ADAC XML files
• Integrated work flow
• Maximise data reuse and minimise manual editing
138. If any of this sounds familiar:
•“Who has the latest copy of the project file?”
•“Where did I file the documents?”
•“I know I have it somewhere on the C drive…or is it on the network
drive?”
•“What was Bill working on before he walked out last week?”
•“Did you get the drawings reviewed and approved before sending it
to the client?”
•“Oh no! I just deleted the wrong file! I hope I have a backup
somewhere…..”
You need 12d Synergy.
139. 12d Synergy is12d Synergy is
A data management and Project collaboration tool.
That also manages 12d Model projects.
Not just for the Surveying or Civil Consulting offices.
Optimised for the small to large businesses in mind.
142. Some issues in managing
electronic documents in an office
• Enforcing policies (e.g. directory structure and document naming convention)
• Security (e.g. right of access by employees and contractors)
• Collaboration between multiple users
• Revision control (e.g. who has the latest version?)
• Workflow
• Archiving/storing/retrieval/searching of documents and document content
• Tracking who/when/why for changes in documents
• Remote access
• Classification of documents (e.g. invoices, emails, Survey files and engineering drawings)
• Quality management (e.g. approval process)
• Tracking engineering document transmittal
• Ease and cost of implementation
143. Document SupportDocument Support
12d Model Projects
Popular productivity applications
Word, Excel, Outlook messages (MSG),
PDF, DWG, Survey files and many more
Individual files
Folders of files
144. Document ManagementDocument Management
Record documents checked
out and track revisions
2 versions of
the file created
File is checked
out for editing
Plugs-in for Word, Excel, Outlook,
AutoCAD and BrisCAD
Enforce naming
convention
146. Job attributes can be inserted
into a document or for file
naming
If the value of a Job attribute is
changed, the document can be
refreshed with the new value of
the attribute
Preview of
document
Insert Job attributes
“Client” and “Site
Address” into document
Attributes
148. Job Management &Job Management &
CollaborationCollaboration
Set up job teams
or roles
Assign tasks to users within
each 12d Synergy job
Communicate via forums
150. Job Work Flow / ScriptingJob Work Flow / Scripting
Implement your own business rules;
Validate changes before they happen
React to changes as they happen
EG: Send an email when a user changes the status of a
file or 12d project
Write scripts both server and client side
Extensive API (Application Programing Interface)
151. 12d Model Access Control12d Model Access Control
Within 12d Synergy control access of 12d Model
Control who accesses what
‒By 12d Synergy Job (Project)
‒By Folder
‒By File
Create user groups with different permission levels
Control shared models, tins and renames
152. 12d Model Integration12d Model Integration
Two methods of managing 12d Model
‒ Check Out / In
‒ Across the network (hides UNC paths)
History and roll back
Off line data
12d Model permissions
Manage Customisation, set 12d Synergy Folder
- $CUSTOMER_USER_LIB
153. 12d Model Integration12d Model Integration
12d Synergy attributes automatically available inside 12d Model
Use 12d Synergy attributes inside your plots (title blocks etc)
Create Plot Sets and Revisions for versioning purposes
154. 12d Synergy Benefits12d Synergy Benefits
Streamline access searched to records through
‒ Keywords
‒ Full-text search
‒ Attributes
Keep track of job & project documents and data
‒ Know who, when and why
‒ Managed approach to document storage
‒ Audit trail for compliance
155. 12d Synergy Benefits12d Synergy Benefits
Increase efficiency
Improve control of information
Enforce standards and workflow
Single point data management
Workflows
Collaboration
Reduce the overall cost of information management
157. Enhanced Create Roads
• Creates computators for kerb returns
• Smart chainages used in MTF’s
• Only Fixed used in MTF’s
• Easier editing of kerb return radii
• Easier editing of road widths
• Easier editing of culdesacs
• Intersection infill
• Create chain of functions
• Snippets
158. Clash Detection
• Major rewrite of clash detection
• Speed ups
• Super pipes and drainage strings
• Horizontal & vertical clearances
• Clash rules
162. Sight Lines
Now takes into consideration
super pipes and drainage strings
extrusions
bill boards
bridge tins
trimeshes
• Used in
Sight Distance
Viewsheds
Shadow Analysis
163. Sight Distance
Now takes into consideration
super pipes and drainage strings
extrusions
bill boards
bridge tins
trimeshes
• Safe limits
• New report
164. Managers
• View Manager
• Tin Manager
• Function Manager
• Template Manager
• Project Manager – all of the above
165. Plotting
• New pdf plotter
• Plotters.4d
• new engine pdf_12d
• string_weights
• Zero padding in plot file names
171. Design => Boxing Menu
• Rename Boxing File
• Copy Boxing File
• Delete Boxing File
• Create definitions file moved to 3rd
last
• Edit definitions file moved to 2nd
last
172. Boxing
• Boxing Rules on Edit Boxing Definitions is
now a grid
• Active column
• Regions
• Resize panel
173. Chainage Free Design - Smart Chainages
• Starting to move into options other than MTF
using those Smart Chainages that make sense
174. Boxing Many Function
• Smart Chainages on front panel
• Smart Chainages on Left/Right Boxing tabs
183. MTF Modifiers Left/Right
New Grid Control
• Tick boxes
• Turn off Interval column
• Turn off Extra start/end column
• Regions
• Highlight
• Aliases – look at with Smart Chainages
185. Plus New Look MTF Modifier Panels
•Different look so they can fit on the screen
186. Plus New Look MTF Modifier Panels
•Different look so they can fit on the screen
187. Plus New Look MTF Modifier Panels
•Different look so they can fit on the screen
•New Layer field – look at later
•Absolute replaced by
New value usage
•Alias – look at later
•Extension for Chainages
delta chainage
•New Smart Chainages
188. New Smart Start / End Chainages
• Even better Chainage Free Design
V10
V11
189. Smart Chainages – New Modes 1
• Relative to Previous Start chainage
• Relative to Previous End chainage
• Start mode - Relative to Self Start
• End mode - Relative to Self Start
• Lowest dropped chainage of modified string
• Highest dropped chainage of modified string
190. Smart Chainages – New Modes 2
• Relative to Alias Start
• Relative to Alias End
191. Smart Chainages – New Modes 3
• Drop Point to Reference String
• Drop Point to Other String
• Intersection of two strings
• Snippet cut reference with model of strings
• Snippet placed to Model of strings
192. MTF Left/Right Modifiers
• Links can be modified regardless of how they
were originally defined
• Wider choices for modifying
Pos
Reverse curves
Compound parabolas
Sinusoidal, Xfall CRC
Straight line, Circular, Parabola
193. So New Link modifiers
• Fixed =>Link
• Cut =>Link
• Fill =>Link
198. So in MTF Left/Right Modifiers
• Links can be modified regardless of how they
were originally defined
• Hence in each of Fixed, Cut and Fill
one command Link now replaces
at least three from V10
For example in Fixed, Link replaces
Width, Height, Xfall, Xfall CRC
199. In Left/Right Modifiers Create:
The options Decisions, Cut, Fill & Final have
been moved to under a new heading
Template
Why ?
200. New MTF Fixed =>Decisions
• Decisions now exist in the Fixed part of MTF
201. New MTF Fixed =>Decisions
• Decisions now exist in the Fixed part of MTF
and they can then be modified afterwards
202. New MTF Fixed =>Decisions
• Decisions now exist in the Fixed part of MTF
and they can then be modified afterwards
• Fixed =>Decisions can replace the Decisions,
Cut, Fill and Final Cut/Fill buttons on Templates
203. New MTF Fixed =>Decisions
• Decisions now exist in Fixed part of MTF and
they can then be modified afterwards
• Fixed =>Decisions can replace the Decisions,
Cut, Fill and Final Cut/Fill buttons on Templates
• Fixed =>Decisions can replace the Decisions,
Cut, Fill and Final options on MTF Create
204. New MTF Fixed =>Decisions
• Decisions now exist in Fixed part of MTF and
they can then be modified afterwards
• Fixed =>Decisions can replace the Decisions,
Cut, Fill and Final Cut/Fill buttons on Templates
• Fixed =>Decisions can replace the Decisions,
Cut, Fill and Final options on MTF Create
• Fixed =>Decisions are part of the Left/Right
Modifiers section of the MTF file
205. So in Left/Right Modifiers Create:
The options Decisions, Cut, Fill & Final have been
moved off the front of Create and under a new
heading Template because Fixed =>Decisions can
replace them all
206. New MTF Fixed =>Boxing
• Boxing commands now exist in the Fixed part
of Left/Right Modifiers
207. Boxing
Use new layer for boxing strings
For example, Fixed =>Boxing => Insert Intersect
208. New MTF Fixed =>Boxing
• Boxing commands now exist in the Fixed part
of Left/Right Modifiers
• Fixed Boxing can replace using the Boxing
option on MTF Edit (and the Boxing Definition
File)
209. New MTF Fixed =>Boxing
• Boxing commands now exist in the Fixed part
of Left/Right Modifiers
• Fixed Boxing can replace using the Boxing
option on MTF Edit (and the Boxing Definition
File)
• Fixed Boxing is part of the Left/Right Modifiers
section of MTF file
214. Shapes
• Shapes can be thought of as being defined in
section by joining user specified points (from any
MTF layer) in a user specified order
215. Shapes, Strings and Trimeshes
• Strings are produced by applying the individual
points in the shape along the reference string
• Trimeshes are produced by applying the shape
along the reference string
216. Shapes, Strings and Trimeshes
So trimeshes are like an extrusions except the position of
the points in the shape can be modified as it is applied along
the string
Trimeshes are solids but unlike traditional solids modelling,
have all the proper Civil tools from the MTF to generate
them
12d Synergy
12d Synergy is a new product by 12d for “Data Management and Project Collaboration”
12d Synergy was designed to help the AEC office manage its documentation including emails, reports and drawings and relate it back to projects, personnel, tasks and workflows.
12d Synergy can run independent of 12d Model
What is 12d Synergy
12d Synergy Architecture
12d Synergy Connecting
12d Synergy Document Support
12d Synergy Documents Management
12d Synergy has plug-ins for Word, Excel, Outlook, AutoCAD and BrisCAD
Populate 12d Synergy folders
Drag and drop files into folder
Word
Create a Word file in a folder with a file naming rule
Edit Word file and add a line of text. Check-in to show increment of the version number
Outlook
Upload an email