automatic braking system and brake actuation before collison
Vechicle safty and securty system using embedded system
1. VEHICLE SECURITY AND SAFETY
SYSTEM USING EMBEDDED
SYSTEM
Guided by: Submitted by:
Project Guide: M. VinothKumar, B.E.,
Lecturer / ECE
K. BalaDhandapani
E.A. Jayanth
V. Balasubramaniyam
J. Karthik
K. Balachandran
2. ABSTRACT
This project is used as a security system for
vehicle.
We are using alcohol sensor and eye blink
sensor in our security system.
If any one of the parameter is sensed to the
message will be transmitted to the GSM
receiver.
GPS is used to find the location of the vehicle.
3. EXISTING
Nowadays in vehicles no safety
measurements are available.
Now we introducing some safety
measurements in vehicles
6. EMBEDDED SYSTEM
It is a combination of hardware and software.
Software control the hardware.
It is a computing device used to do the specific
job.
7. GPS AND GSM
GPS
o GPS means global positioning system.
o It is used to find the location of the earth.
GSM
o GSM – Global System for Mobile
communication.
o GSM used to sent the message from one
person to another person.
8. ALCOHOL SENSOR
o The sensor model is TGS 822.
o It is used to detect the drug person.
Application
1. Breathe alcohol detectors.
2. Gas leak detector or alarm.
Features
1. High sensitivity to organic solvent vapors such as
ethanol.
2. High stability and reliability over a long period
9. EYE BLINK SENSOR
Eye Movement Measurements:Usually pairs of electrodes
are placed either above and below the eye or the left and
right of the eye.
If the eye is moved from the centre position towards the
electrode this electrode “sees” the positive side of the
retina and the opposite and the opposite electrode “sees”
the negative side of the retina.
A potential difference occurs between the
electrodes.Assuming that the resting potential is
constant,the recorded potential is a measure for the eye
position.
10. VIBRATION SENSOR
The piezoelectric is used here.
It is a device that uses the piezoelectric
effect to measure pressure acceleration,
strain or force by converting them to an
electrical charge.
11. RELAY
Relay is used as a switch.
It is used to on and off the buzzer and the
motor.
It works at 12v DC.
12. LCD SCREEN
LCD - Liquid Crystal Display.
LCD display is used to display the characters
and alphabets.
13. RECEIVER
It is a receiving and mobile unit.
To used to mobile phone
numbers(Eg.108,100,198)
14. ADVANTAGES
It will prevent from vehicle accident .
It will save Human life and also prevent from
heavy damage.
It also saves money indirectly and benefit for
Government.
15. APPLICATION
This system is very useful for vehicle system.
Also for other system such as
Roadways(Bus, Cars).
16. CONCLUSION
This project will be highly useful if it is done
in large scale for the betterment of the public.
