Submit Search
Upload
Plants
•
Download as DOC, PDF
•
0 likes
•
143 views
M
mireiaparetapalli
Follow
Report
Share
Report
Share
1 of 4
Download now
Recommended
Plants
Plants
martinamateuplana
This Application Note illustrates the use and advantages of dielectric heating, which as the name implies, is used for materials that are non-conducting. The essential advantage of dielectric heating is that the heat is generated within the material to be heated. In comparison with more conventional heating techniques (hot air, infrared, et cetera) in which the material is heated via the outer surface, dielectric heating is much more rapid. This is because electrical insulating materials, i.e. the domain of dielectric heating, are usually also poor conductors of heat. Other interesting characteristics of radio frequency and microwave heating are the high power density and the potential for selectively heating materials. However, dielectric heating is a very expensive technique that cannot usually compete in cost terms with techniques such as resistance or infrared heating.
Application Note - Dielectric Heating
Application Note - Dielectric Heating
Leonardo ENERGY
A presentation explaining Seebeck Effect and its application, very easy to understand.
Thermoelectric generation using waste heat
Thermoelectric generation using waste heat
Aman Anand
Summer Internship Poster Presentation for Idaho Conference on Undergraduate Research.
Investigation on Instruments and Measurement Techniques for the Thermoelectri...
Investigation on Instruments and Measurement Techniques for the Thermoelectri...
Dwencel John Mamayson
presentation on thermoelectricity
Thermoelectricity
Thermoelectricity
Sushmitha Priyadarshini
THERMOELECTRIC MATERIAL AND DEVICE.
THERMOELECTRIC MATERIAL AND DEVICE.
Dalvir singh
2.1.1resistor
2.1.1resistor
Talia Carbis
This application note illustrates the use and advantages of dielectric heating, which as the name implies, is used for materials that are non-conducting. The essential advantage of dielectric heating is that the heat is generated within the material to be heated. In comparison with more conventional heating techniques (hot air, infrared, et cetera) in which the material is heated via the outer surface, dielectric heating is much more rapid. This is because electrical insulating materials, i.e. the domain of dielectric heating, are usually also poor conductors of heat. Other interesting characteristics of radio frequency and microwave heating are the high power density and the potential for selectively heating materials. However, dielectric heating is an expensive technique and its application is generally limited to the heating of products with high added value, or to products that cannot be heated by other means.
Dielectric heating
Dielectric heating
Bruno De Wachter
Recommended
Plants
Plants
martinamateuplana
This Application Note illustrates the use and advantages of dielectric heating, which as the name implies, is used for materials that are non-conducting. The essential advantage of dielectric heating is that the heat is generated within the material to be heated. In comparison with more conventional heating techniques (hot air, infrared, et cetera) in which the material is heated via the outer surface, dielectric heating is much more rapid. This is because electrical insulating materials, i.e. the domain of dielectric heating, are usually also poor conductors of heat. Other interesting characteristics of radio frequency and microwave heating are the high power density and the potential for selectively heating materials. However, dielectric heating is a very expensive technique that cannot usually compete in cost terms with techniques such as resistance or infrared heating.
Application Note - Dielectric Heating
Application Note - Dielectric Heating
Leonardo ENERGY
A presentation explaining Seebeck Effect and its application, very easy to understand.
Thermoelectric generation using waste heat
Thermoelectric generation using waste heat
Aman Anand
Summer Internship Poster Presentation for Idaho Conference on Undergraduate Research.
Investigation on Instruments and Measurement Techniques for the Thermoelectri...
Investigation on Instruments and Measurement Techniques for the Thermoelectri...
Dwencel John Mamayson
presentation on thermoelectricity
Thermoelectricity
Thermoelectricity
Sushmitha Priyadarshini
THERMOELECTRIC MATERIAL AND DEVICE.
THERMOELECTRIC MATERIAL AND DEVICE.
Dalvir singh
2.1.1resistor
2.1.1resistor
Talia Carbis
This application note illustrates the use and advantages of dielectric heating, which as the name implies, is used for materials that are non-conducting. The essential advantage of dielectric heating is that the heat is generated within the material to be heated. In comparison with more conventional heating techniques (hot air, infrared, et cetera) in which the material is heated via the outer surface, dielectric heating is much more rapid. This is because electrical insulating materials, i.e. the domain of dielectric heating, are usually also poor conductors of heat. Other interesting characteristics of radio frequency and microwave heating are the high power density and the potential for selectively heating materials. However, dielectric heating is an expensive technique and its application is generally limited to the heating of products with high added value, or to products that cannot be heated by other means.
Dielectric heating
Dielectric heating
Bruno De Wachter
PSU TPV Research 2002
PSU TPV Research 2002
Curtis williams
Abstract The idea of this project is to utilise the waste heat energy being generated in automobiles. It involves the trapping of heat energy being generated from the heat source in vehicles and convert to electrical energy which can be used for many appliances. The heat energy and the temperature from the heat source is being sensed by the thermocouple and is converted to electrical energy by a device called Thermoelectric Generator which works on Seebeck effect. The electric potential produced in thermoelectric generator is boosted by the boost converter thereby increasing the magnitude of voltage, required for charging battery. Further, the battery is connected to run the auxiliary appliances in the system. Keywords: Thermocouple; Thermoelectric Generator; Seebeck effect, Boost converter
Battery charging using thermoelectric generation module in automobiles
Battery charging using thermoelectric generation module in automobiles
eSAT Journals
Converts waste heat to useful electrical energy
Thermoelectric generator
Thermoelectric generator
Sravan Dumpeti
The project is based on electric heating and its method. This project is a college project done by students. So the project might have some mistakes. Use this project as any source is restricted. The project is uploaded only because of the benefits of the students who want to get the basic idea of the powerpoint presentation of a project.
ELECTRIC HEATING AND HEATING METHODS
ELECTRIC HEATING AND HEATING METHODS
Deepjyoti Patowary
About Piezoelectric material. types of material, piezo-Electric Effect, and advantage and disadvantage of material.also you can find some useful information about the internal working of molecules.Application of material according to field.
Introduction about ptz material
Introduction about ptz material
Yatinkumar Patel
Application Prospects of Thermoelectric Technique by Chao Han* in Crimson Publishers: Peer Reviewed Material Science Journals
Application Prospects of Thermoelectric Technique - Crimson Publishers
Application Prospects of Thermoelectric Technique - Crimson Publishers
CrimsonPublishersRDMS
Thermoelectric power gen. and refrig 2
Thermoelectric power gen. and refrig 2
Rahul Sharma
In this paper, the effects of the hot-spotted cell on PV module were evaluated. The experimental observation was based on 100 kW PV array composed of 20 PV modules. It was found that an increasing number of hot-spotted solar cells in a PV module would likely increase its output power loss. It was also noticed that most of the PV modules affected by hot-spotted PV string are relatively affected by high-temperature levels, dust, and Partial shading due to trees or tall vegetation. Furthermore, the average performance ratio (PR) and degradation rate (DR) of all examined PV modules were analyzed. PR was observed to have a higher value of 0.78 in a non-hot-spotted PV array, whereas low PR of 0.65 was observed in a hot-spotted PV array. High DR of 3.13/year was observed in hot-spotted PV array; while low DR of 1.48/year was found in a module with no hot-spot. It was evident that the mean PR is significantly reduced due to the existence of hot-spots in the PV modules. DR was also increased due to hot-spot in the PV array. Hence, it is important to select materials that have the highest thermal stability to avoid mild hot spot situations that will lead to immediate damage of the panel. Hot-spot study analysis will help increase PV lifetime power output by detecting and preventing hot spotting before it permanently damages the PV panel.
EFFECT OF HOT-SPOTTED CELL ON PV MODULE PERFORMANCE
EFFECT OF HOT-SPOTTED CELL ON PV MODULE PERFORMANCE
IAEME Publication
NEW TECHNOLOGY FOR CONVERTING HEAT TO ELECTRIC ENERGY AND FOR COOLING
Presentation v4.1
Presentation v4.1
Karapetyan Gevork
Basics of thermoelectrics and literature discussion of organic thermoelectric generators
Organic thermoelectric generators
Organic thermoelectric generators
Viji Vijitha
Based on the International Electrotechnical Commission standards, the electronic devices in the industrial class (e.g., integrated circuits or batteries) can only operate at the ambient temperature between -40°C and 85°C. For the human-involved regions in Alaska, Northern Canada, and Antarctica, extreme cold condition as low as -55°C might affect sensing electronic devices utilized in the scientific or industrial applications. In this paper, we propose a design and optimization methodology for the selfheating portable enclosures, which can warm up the inner space from -55°C for encasing the low-cost industrial-class electronic devices instead of expensive military-class ones to work reliably within their allowed operating temperature limit. Among the other options, ceramic thermal resistors are selected as the heating elements inside the enclosure. The placement of the thermal resistors is studied with the aid of thermal modelling for the single heating device by using the curve fitting technique to achieve uniform temperature distribution within the enclosure. To maintain the inner temperature above -40°C but with the least power consumption from the thermal resistors, we have developed a control system based on the fuzzy logic controller. For validation, we have utilized COMSOL Multiphysics software and then one prototyped enclosure along with the fuzzy control system. Our experimental measurement exhibits its efficacy compared to the other design options.
Design and optimization of cost-effective coldproof portable enclosures for p...
Design and optimization of cost-effective coldproof portable enclosures for p...
IJECEIAES
Various measurements systems used in Nuclear Plant
Metrology in Nuclear Power Plant
Metrology in Nuclear Power Plant
Gourav Gupta
https://www.irjet.net/archives/V5/i3/IRJET-V5I3797.pdf
IRJET- Process of Generating Electricity from Home Garden Plants
IRJET- Process of Generating Electricity from Home Garden Plants
IRJET Journal
Electrical Engineering Material
Electrical Engineering Material Part-VII
Electrical Engineering Material Part-VII
Asif Jamadar
International peer-reviewed academic journals call for papers, http://www.iiste.org/Journals
Thermoelectric power generated from computer waste heat
Thermoelectric power generated from computer waste heat
Alexander Decker
The magnetic refrigeration at room temperature is an emerging technology that has attracted the interest of researchers around the world (Bouchekara, 2008). Such a technology applies the magnetocaloric effect which was first discovered by Warburg (Bohigas, 2000; Zimm, 2007).
MAGNETIC REFRIGERATION
MAGNETIC REFRIGERATION
Akhil R
Space heating
Space heating
Julian Swindell
Energy Audit is the systematic process for finding out the energy conservation opportunities in industrial processes. The project carried out studies on various energy conservation measures application in areas like lighting, motors, compressors, transformer, ventilation system etc. In this investigation, studied the technical aspects of the various measures along with its cost benefit analysis. Investigation found that major areas of energy conservation are- 1. Energy efficient lighting schemes. 2. Use of electronic ballast instead of copper ballast. 3. Use of wind ventilators for ventilation. 4. Use of VFD for compressor. 5. Transparent roofing sheets to reduce energy consumption. So Energy Audit is the only perfect & analyzed way of meeting the Industrial Energy Conservation.
Studies On Energy Conservation And Audit
Studies On Energy Conservation And Audit
IJMER
https://www.irjet.net/archives/V6/i4/IRJET-V6I41202.pdf
IRJET- A Modern Lightning System for Power Saving Application
IRJET- A Modern Lightning System for Power Saving Application
IRJET Journal
INDUCTION HEATING BY HIGH FREQUENCY RESONANT INVERTER
INDUCTION HEATING BY HIGH FREQUENCY RESONANT INVERTER
Uday Kumar Adha
Represented as 'Regional Director'of Kaziranga University,Assam-India and Ex-official of NIFT,Ministry of Textiles,Govt.of India.
Interaction with an official from Guinness World Record performing a responsi...
Interaction with an official from Guinness World Record performing a responsi...
T.K(Tapash Kumar) Home
KT Status Report-2016
KNOWLEDGE TRUST
KNOWLEDGE TRUST
T.K(Tapash Kumar) Home
More Related Content
What's hot
PSU TPV Research 2002
PSU TPV Research 2002
Curtis williams
Abstract The idea of this project is to utilise the waste heat energy being generated in automobiles. It involves the trapping of heat energy being generated from the heat source in vehicles and convert to electrical energy which can be used for many appliances. The heat energy and the temperature from the heat source is being sensed by the thermocouple and is converted to electrical energy by a device called Thermoelectric Generator which works on Seebeck effect. The electric potential produced in thermoelectric generator is boosted by the boost converter thereby increasing the magnitude of voltage, required for charging battery. Further, the battery is connected to run the auxiliary appliances in the system. Keywords: Thermocouple; Thermoelectric Generator; Seebeck effect, Boost converter
Battery charging using thermoelectric generation module in automobiles
Battery charging using thermoelectric generation module in automobiles
eSAT Journals
Converts waste heat to useful electrical energy
Thermoelectric generator
Thermoelectric generator
Sravan Dumpeti
The project is based on electric heating and its method. This project is a college project done by students. So the project might have some mistakes. Use this project as any source is restricted. The project is uploaded only because of the benefits of the students who want to get the basic idea of the powerpoint presentation of a project.
ELECTRIC HEATING AND HEATING METHODS
ELECTRIC HEATING AND HEATING METHODS
Deepjyoti Patowary
About Piezoelectric material. types of material, piezo-Electric Effect, and advantage and disadvantage of material.also you can find some useful information about the internal working of molecules.Application of material according to field.
Introduction about ptz material
Introduction about ptz material
Yatinkumar Patel
Application Prospects of Thermoelectric Technique by Chao Han* in Crimson Publishers: Peer Reviewed Material Science Journals
Application Prospects of Thermoelectric Technique - Crimson Publishers
Application Prospects of Thermoelectric Technique - Crimson Publishers
CrimsonPublishersRDMS
Thermoelectric power gen. and refrig 2
Thermoelectric power gen. and refrig 2
Rahul Sharma
In this paper, the effects of the hot-spotted cell on PV module were evaluated. The experimental observation was based on 100 kW PV array composed of 20 PV modules. It was found that an increasing number of hot-spotted solar cells in a PV module would likely increase its output power loss. It was also noticed that most of the PV modules affected by hot-spotted PV string are relatively affected by high-temperature levels, dust, and Partial shading due to trees or tall vegetation. Furthermore, the average performance ratio (PR) and degradation rate (DR) of all examined PV modules were analyzed. PR was observed to have a higher value of 0.78 in a non-hot-spotted PV array, whereas low PR of 0.65 was observed in a hot-spotted PV array. High DR of 3.13/year was observed in hot-spotted PV array; while low DR of 1.48/year was found in a module with no hot-spot. It was evident that the mean PR is significantly reduced due to the existence of hot-spots in the PV modules. DR was also increased due to hot-spot in the PV array. Hence, it is important to select materials that have the highest thermal stability to avoid mild hot spot situations that will lead to immediate damage of the panel. Hot-spot study analysis will help increase PV lifetime power output by detecting and preventing hot spotting before it permanently damages the PV panel.
EFFECT OF HOT-SPOTTED CELL ON PV MODULE PERFORMANCE
EFFECT OF HOT-SPOTTED CELL ON PV MODULE PERFORMANCE
IAEME Publication
NEW TECHNOLOGY FOR CONVERTING HEAT TO ELECTRIC ENERGY AND FOR COOLING
Presentation v4.1
Presentation v4.1
Karapetyan Gevork
Basics of thermoelectrics and literature discussion of organic thermoelectric generators
Organic thermoelectric generators
Organic thermoelectric generators
Viji Vijitha
Based on the International Electrotechnical Commission standards, the electronic devices in the industrial class (e.g., integrated circuits or batteries) can only operate at the ambient temperature between -40°C and 85°C. For the human-involved regions in Alaska, Northern Canada, and Antarctica, extreme cold condition as low as -55°C might affect sensing electronic devices utilized in the scientific or industrial applications. In this paper, we propose a design and optimization methodology for the selfheating portable enclosures, which can warm up the inner space from -55°C for encasing the low-cost industrial-class electronic devices instead of expensive military-class ones to work reliably within their allowed operating temperature limit. Among the other options, ceramic thermal resistors are selected as the heating elements inside the enclosure. The placement of the thermal resistors is studied with the aid of thermal modelling for the single heating device by using the curve fitting technique to achieve uniform temperature distribution within the enclosure. To maintain the inner temperature above -40°C but with the least power consumption from the thermal resistors, we have developed a control system based on the fuzzy logic controller. For validation, we have utilized COMSOL Multiphysics software and then one prototyped enclosure along with the fuzzy control system. Our experimental measurement exhibits its efficacy compared to the other design options.
Design and optimization of cost-effective coldproof portable enclosures for p...
Design and optimization of cost-effective coldproof portable enclosures for p...
IJECEIAES
Various measurements systems used in Nuclear Plant
Metrology in Nuclear Power Plant
Metrology in Nuclear Power Plant
Gourav Gupta
https://www.irjet.net/archives/V5/i3/IRJET-V5I3797.pdf
IRJET- Process of Generating Electricity from Home Garden Plants
IRJET- Process of Generating Electricity from Home Garden Plants
IRJET Journal
Electrical Engineering Material
Electrical Engineering Material Part-VII
Electrical Engineering Material Part-VII
Asif Jamadar
International peer-reviewed academic journals call for papers, http://www.iiste.org/Journals
Thermoelectric power generated from computer waste heat
Thermoelectric power generated from computer waste heat
Alexander Decker
The magnetic refrigeration at room temperature is an emerging technology that has attracted the interest of researchers around the world (Bouchekara, 2008). Such a technology applies the magnetocaloric effect which was first discovered by Warburg (Bohigas, 2000; Zimm, 2007).
MAGNETIC REFRIGERATION
MAGNETIC REFRIGERATION
Akhil R
Space heating
Space heating
Julian Swindell
Energy Audit is the systematic process for finding out the energy conservation opportunities in industrial processes. The project carried out studies on various energy conservation measures application in areas like lighting, motors, compressors, transformer, ventilation system etc. In this investigation, studied the technical aspects of the various measures along with its cost benefit analysis. Investigation found that major areas of energy conservation are- 1. Energy efficient lighting schemes. 2. Use of electronic ballast instead of copper ballast. 3. Use of wind ventilators for ventilation. 4. Use of VFD for compressor. 5. Transparent roofing sheets to reduce energy consumption. So Energy Audit is the only perfect & analyzed way of meeting the Industrial Energy Conservation.
Studies On Energy Conservation And Audit
Studies On Energy Conservation And Audit
IJMER
https://www.irjet.net/archives/V6/i4/IRJET-V6I41202.pdf
IRJET- A Modern Lightning System for Power Saving Application
IRJET- A Modern Lightning System for Power Saving Application
IRJET Journal
INDUCTION HEATING BY HIGH FREQUENCY RESONANT INVERTER
INDUCTION HEATING BY HIGH FREQUENCY RESONANT INVERTER
Uday Kumar Adha
What's hot
(20)
PSU TPV Research 2002
PSU TPV Research 2002
Battery charging using thermoelectric generation module in automobiles
Battery charging using thermoelectric generation module in automobiles
Thermoelectric generator
Thermoelectric generator
ELECTRIC HEATING AND HEATING METHODS
ELECTRIC HEATING AND HEATING METHODS
Introduction about ptz material
Introduction about ptz material
Application Prospects of Thermoelectric Technique - Crimson Publishers
Application Prospects of Thermoelectric Technique - Crimson Publishers
Thermoelectric power gen. and refrig 2
Thermoelectric power gen. and refrig 2
EFFECT OF HOT-SPOTTED CELL ON PV MODULE PERFORMANCE
EFFECT OF HOT-SPOTTED CELL ON PV MODULE PERFORMANCE
Presentation v4.1
Presentation v4.1
Organic thermoelectric generators
Organic thermoelectric generators
Design and optimization of cost-effective coldproof portable enclosures for p...
Design and optimization of cost-effective coldproof portable enclosures for p...
Metrology in Nuclear Power Plant
Metrology in Nuclear Power Plant
IRJET- Process of Generating Electricity from Home Garden Plants
IRJET- Process of Generating Electricity from Home Garden Plants
Electrical Engineering Material Part-VII
Electrical Engineering Material Part-VII
Thermoelectric power generated from computer waste heat
Thermoelectric power generated from computer waste heat
MAGNETIC REFRIGERATION
MAGNETIC REFRIGERATION
Space heating
Space heating
Studies On Energy Conservation And Audit
Studies On Energy Conservation And Audit
IRJET- A Modern Lightning System for Power Saving Application
IRJET- A Modern Lightning System for Power Saving Application
INDUCTION HEATING BY HIGH FREQUENCY RESONANT INVERTER
INDUCTION HEATING BY HIGH FREQUENCY RESONANT INVERTER
Viewers also liked
Represented as 'Regional Director'of Kaziranga University,Assam-India and Ex-official of NIFT,Ministry of Textiles,Govt.of India.
Interaction with an official from Guinness World Record performing a responsi...
Interaction with an official from Guinness World Record performing a responsi...
T.K(Tapash Kumar) Home
KT Status Report-2016
KNOWLEDGE TRUST
KNOWLEDGE TRUST
T.K(Tapash Kumar) Home
Students interested in pursuing higher education in USA are advised to send request to E-mail:tk_home@rediffmail.com Schools may also write to us for giving presentation to sr.students for exposure and knowledge.
Uni rely presentation (1)
Uni rely presentation (1)
T.K(Tapash Kumar) Home
for whatever
Magazine advert comparisons
Magazine advert comparisons
AngelaThumwood
A good opportunity for investment.Also the Felicity Group offer placement to students fulfilling social cause.
Felicity group
Felicity group
T.K(Tapash Kumar) Home
Free sharing the lesson that we had done at our University of South East- Asia, Seim Reap, Cambodia ,
Global 3 ch 1 unit 1
Global 3 ch 1 unit 1
Mon Mab
We Would love to learn, Free sharing the lesson that we had done at our University of South East- Asia, Seim Reap, Cambodia.
Global 3 ch 2 unit 1
Global 3 ch 2 unit 1
Mon Mab
PRAKARYA BAHAN KERAS
PRAKARYA
PRAKARYA
Rakayasa
Investors,Educational institutions/Universities and all concerned are welcome to contact for any queries on this subject. T.K.Home E-Mail:tk_home@rediffmail.com Mob:9818313263
Kt status report_2016_rev
Kt status report_2016_rev
T.K(Tapash Kumar) Home
Classroom Role of Kindergaten
Rule of kidergarten class avc
Rule of kidergarten class avc
Mon Mab
We Would love to learn, Free sharing the lesson that we had done at our University of South East- Asia, Seim Reap, Cambodia.
Global 3 ch 1 unit 3
Global 3 ch 1 unit 3
Mon Mab
Introduction research topic A Case Study in Nationa Universty of Loas because of low English Learning
Presntation group 5 Of USEA, in Seim Reap
Presntation group 5 Of USEA, in Seim Reap
Mon Mab
Free download for Cambodian English Class
Group iv global studies
Group iv global studies
Mon Mab
We Would love to learn, Free sharing the lesson that we had done at our University of South East- Asia, Seim Reap, Cambodia.
Global 3 ch 3 unit 2 (24)
Global 3 ch 3 unit 2 (24)
Mon Mab
We Would love to learn, Free sharing the lesson that we had done at our University of South East- Asia, Seim Reap, Cambodia.
Global 3 ch 2 unit 3
Global 3 ch 2 unit 3
Mon Mab
We Would love to learn, Free sharing the lesson that we had done at our University of South East- Asia, Seim Reap, Cambodia.
Global 3 ch 2 unit 5 halfway
Global 3 ch 2 unit 5 halfway
Mon Mab
طرق التعامل مع الزبائن ذو الظورف الصبعة
مهارات الدعم الفني
مهارات الدعم الفني
azozy_saad
We Would love to learn, Free sharing the lesson that we had done at our University of South East- Asia, Seim Reap, Cambodia.
Global 3 ch 2 unit 4
Global 3 ch 2 unit 4
Mon Mab
Ingenieria, software
Análisis de sistemas clase 3
Análisis de sistemas clase 3
Jose Ñacari Huarcaya
We Would love to learn, Free sharing the lesson that we had done at our University of South East- Asia, Seim Reap, Cambodia.
Global 3 ch 3 unit 1 (10)
Global 3 ch 3 unit 1 (10)
Mon Mab
Viewers also liked
(20)
Interaction with an official from Guinness World Record performing a responsi...
Interaction with an official from Guinness World Record performing a responsi...
KNOWLEDGE TRUST
KNOWLEDGE TRUST
Uni rely presentation (1)
Uni rely presentation (1)
Magazine advert comparisons
Magazine advert comparisons
Felicity group
Felicity group
Global 3 ch 1 unit 1
Global 3 ch 1 unit 1
Global 3 ch 2 unit 1
Global 3 ch 2 unit 1
PRAKARYA
PRAKARYA
Kt status report_2016_rev
Kt status report_2016_rev
Rule of kidergarten class avc
Rule of kidergarten class avc
Global 3 ch 1 unit 3
Global 3 ch 1 unit 3
Presntation group 5 Of USEA, in Seim Reap
Presntation group 5 Of USEA, in Seim Reap
Group iv global studies
Group iv global studies
Global 3 ch 3 unit 2 (24)
Global 3 ch 3 unit 2 (24)
Global 3 ch 2 unit 3
Global 3 ch 2 unit 3
Global 3 ch 2 unit 5 halfway
Global 3 ch 2 unit 5 halfway
مهارات الدعم الفني
مهارات الدعم الفني
Global 3 ch 2 unit 4
Global 3 ch 2 unit 4
Análisis de sistemas clase 3
Análisis de sistemas clase 3
Global 3 ch 3 unit 1 (10)
Global 3 ch 3 unit 1 (10)
Plants
1.
Nuclear plant
2.
Termic plant
3.
Hydroelectric plant
4.
Eolic plant
Download now
