It is important that budgets be accepted by Question 16 options- supe.docx

•Download as DOCX, PDF•

0 likes•4 views

It is important that budgets be accepted by Question 16 options: supervisors. all of these answers are correct. department heads. division managers. An overly optimistic sales budget may result in Question 17 options: increases in selling prices late in the year. increased sales during the year. insufficient inventories. excessive inventories. If the required direct materials purchases are 36,000 pounds, the direct materials required for production is three times the direct materials purchases, and the beginning direct materials are three and a half times the direct materials purchases, what are the desired ending direct materials in pounds? Question 18 options: 54,000 90,000 18,000 36,000 The single most important output in preparing financial budgets is the Question 19 options: budgeted income statement. determination of the unit cost of the product. sales forecast. cash budget. Which one of the following budgets would be prepared for a manufacturer but not for a merchandiser? Question 20 options: Sales budget Budgeted income statement Cash budget Direct labor budget Solution Solution 16. All of these are correct. Solution 17. Insufficient inventories. Solution 18. Purchases = 36000 Consumption = 36000*3 = 108000 Opening stock = 36000*3.5 = 126000 Closing stock = Opening stock + Purchases - Consumption = 126000 + 36000 - 108000 = 54000 pounds Solution 19. Cash Budget. Solution 20. Direct labor budget. .

Education

Question 20 options:
Sales budget
Budgeted income statement
Cash budget
Direct labor budget
Solution
Solution 16. All of these are correct.
Solution 17. Insufficient inventories.
Solution 18.
Purchases = 36000
Consumption = 36000*3 = 108000
Opening stock = 36000*3.5 = 126000
Closing stock = Opening stock + Purchases - Consumption = 126000 + 36000 - 108000 = 54000
pounds
Solution 19. Cash Budget.
Solution 20. Direct labor budget.

It is important that budgets be accepted by Question 16 options- supe.docx

More from michael1810

Judging from their relative positions in the Periodic Table, which atom in each set is more electronegative? (a) Carbon or nitrogen (b) Chlorine or bromine (c) Oxygen or sulfur Solution a) carbon and nitrogen Ans - Nitrogen both carbon and nitrogen belong to II nd period of periodic table in same period trend of electronegattivity is from left to right electronegativity increases. nitrogen is one place right from carbon therefore nitrogen in more electronegative than carbon. b) Chlorine and bromine Ans - Chlorine Chlorine and bromine belong to same group of halogen familly trend for elecronegativity in same group is from up to down electronegativity decreases. bromine is down than chlorine in group therefore bromine have less electronegativity and chlorine have more electronegativity than bromine. c) Oxygen and sulfur Ans - Oxygen oxygen and sulfur belong to same group of 6A trend for elecronegativity in same group is from up to down electronegativity decreases. sufur is down than oxygen in group therefore sulfur have less electronegativity and oxygen have more electronegativity than sulfur. .

Judging from their relative positions in the Periodic Table- which ato.docx

michael1810

John Corporation has three investments that are classified as noncontrolling. 1.A bond investment, purchased on Jan 1, 2014 and maturing on Dec. 31, 2020. They purchased them to help out the company and the interest income was quite high. 2. An investment in Mark Company stock, purchased on Dec. 1, 2014 because the price was low and John Corp. had some excess cash to invest. John Corporation\'s investment manager did not like taking risk or playing the market on an active basis. 3. An investment in 25% of the stock of Smith Company, a new customer who was experiencing management difficulties that affected their profitability. John Corp. intended to keep this investment for as long as it took to stabilize the company. Answer the following questions about these investments. 1. The investment in bonds should be classified as: Select one: a. held-to-maturity securities b. trading securities c. significant influence securities d. available-for-sale securities 2. The investment in Mark Company stock should be classified as: Select one: a. trading securities b. available-for-sale securities c. significant influence securities d. held-to-maturity securities 3. The investment in Smith Company stock should be classified as: Select one: a. held-to-maturity securities b. trading securities c. available-for-sale securities d. significant influence securities Solution Bonds are d. available-for-sale securities Reason is that they were bought to help out other company rather than making money out of it. Investment in Mark company is reffered to as d. held-to-maturity securities Investment in Smith Company is reffered to as d. significant influence securities as these stocks amount to 25%. Stock holing of 20 to 50% is refferef to as Significant influence securities. .

John Corporation has three investments that are classified as noncontr.docx

michael1810

John Smith worked in the stockyard of a large building supply company. One day he unexpectedly left for California, never to return. His foreman seized the opportunity to continue to submit time cards for John to the payroll department. Each week, as part of his normal duties, the foreman received the employee paychecks from payroll and distributed them to the workers on his shift. Because John was not present to collect his paycheck, the foreman forged John Solution In the given circumstances, these two internal controls can be implemented to prevent & detect fraud- 1. The practice of giving paychecks to the foreman should be done away with. Instead each employee should personally visit the payroll department, put his signature and then collect his or her paycheck. 2.For attendance purpose also the employees should visit the payroll department where the time keeper will personally accept each one\'s time card. Time card furnished through a colleage or friend should never be accepted. .

John Smith worked in the stockyard of a large building supply company-.docx

michael1810

John has tremendous technical skills and frequently comes up with valuable ideas. However, he has little idea how to promote it within the organization. John is a good example of a. an inventor. b. an idea champion. c. a sponsor. d. a critic. e. an in-transition employee. Solution a. Inventor is the one who develops and understands technical aspects of idea. Inventor has no knowledge or less knowledge of converting the idea into a business. Though John has a tremendous technical skills but he has little knowledge of promoting the idea. Thus, he is an INVENTOR. .

John has tremendous technical skills and frequently comes up with valu.docx

michael1810

Joe Frecaso was recently hired as the controller for Larson Cement Company after the previous controller was killed in a boating accident in Biscayne Bay. That controller had been with the company since it first opened its doors. Joe spends most of his time in the back office that has a panoramic view of Solution 1. Frank and Joe have realized that the checks payable to Mary Waters is being done fraudently. Betty is responsible for the checkbooks and she keeps the checkbook locked in safe. So it is quite clear that Betty has been fraudently writing the checks being paid to Mary Waters and Frank and Joe are quite on target at this assumption. However, they could do better by confronting Betty and initiating a legal suit against her for causing losses to the company. They should be more aggressive and action-oriented than just putting a camera at her office and conducting an audit. She should be immediately confronted, enquired upon and if found guilty of these wrong doings should be immediately fired. Subsequently, legal action should be taken against her. 2. Clearly the internal control processes is quite weak at Larson\'s Cement. Joe, as the controller, should be knowing the accounting and finance department\'s workings in and out. However, he was shocked to learn about the account being overdrawn. Its just Frank, the current CEO, who seems to be hands on. Other employees also need to be more hands on, specially Joe who is responsible for the company\'s control process. Its no excuse that Betty is responsible for the checks, so she should be the only one having information about them. This is a clear gap in the control system of the company, inviting wrong doings by the employees. This gap needs to be filled. .

Joe Frecaso was recently hired as the controller for Larson Cement Com.docx

michael1810

Java Write a method that takes as a parameter a one dimensional array of characters and moves all characters â€™*â€™ to the end (high indexes) of the array. If the original array is â€™aâ€™ â€™bâ€™ â€™*â€™ â€™dâ€™ â€™zâ€™ â€™*â€™ â€™*â€™ â€™pâ€™ then your method should produce â€™aâ€™ â€™bâ€™ â€™dâ€™ â€™zâ€™ â€™pâ€™ â€™*â€™ â€™*â€™ â€™*â€™ The relative positions of the other characters should remain unchanged. REMEMBER : Write a complete method (including methods signature with parameters and return type). DO NOT write a complete program with main, etc. Your method should manipulate the array that is passed to it. Solution public class MoveStar { public static void moveStar(char[] arr){ if(arr == null) return; int j = -1; for(int i=0; i<arr.length; i++){// skipping star if(arr[i] !=\'*\'){ arr[++j] = arr[i]; } } while(++j < arr.length)// filling remaining position with * arr[j] = \'*\'; } public static void main(String[] args) { char[] arr = {\'a\', \'b\' ,\'*\' ,\'d\' ,\'z\',\'*\', \'*\' ,\'p\'}; moveStar(arr); for(char c: arr) System.out.print(c+\" \"); } } .

Java Write a method that takes as a parameter a one dimensional array.docx

michael1810

Java Programming: 1) Write a recursive method that finds and returns the sum of the elements in an int array. Also, write a program to test your method ** Please simple enough for a beginner to understand Solution /** * @author * */ public class RecusrsiveArraySum { /** * @param args */ public static void main(String[] args) { int arr[] = { 3, 4, 6, 7 }; System.out .println(\"Sum of array Elements: \" + sum(arr, arr.length - 1)); } /** * recursive sum of array elements * * @param array * @param index * @return */ public static int sum(int[] array, int index) { // if array is empty if (index < 0) return 0; if (index == 0) { // when no index reaches first element return array[0]; } else { // adding array elements return array[index] + sum(array, index - 1); } } } OUTPUT: Sum of array Elements: 20 .

Java Programming- 1) Write a recursive method that finds and returns t.docx

michael1810

JAVA Q2: Write a program that reads strings from the user and writes them to an output file called userStrings.txt. Stop processing when the user enters the string \"DONE\". Do not write the sentinel string (\"DONE\") to the output file. [15 points] Hint: For a complete example of file IO, please see the attached TestData program. Sample Output: A string. Another string. Yet more text... DONE Solution Answer import java.io.File; import java.io.FileOutputStream; import java.io.IOException; import java.util.Scanner; class WriteStringFile { public static void main(String[] args) { File file = new File(\"D:/userFile.txt\"); String data; Scanner input = new Scanner(System.in); data = input.readLine(); try (FileOutputStream fop = new FileOutputStream(file)) { // if file doesn\'t exists, then create it if (!file.exists()) { file.createNewFile(); } if (data != \"DONE\") { // get the content in bytes byte[] contentInBytes = content.getBytes(); fop.write(contentInBytes); fop.flush(); fop.close(); } else { System.out.println(\"User Enter the value Done.. So unable to write into file\"); } } catch (IOException e) { e.printStackTrace(); } } } .

JAVA Q2- Write a program that reads strings from the user and writes t.docx

michael1810

Java Language Which of the following statements is true? Select all that apply. Select one or more: 1.Data maintained in files is often called transient data. 2.Data is lost when a local variable â€œgoes out of scope.â€ 3.Files are used for long-term retention of large amounts of data. 4.Storage of data variables and arrays is temporary. Which of the following classes enable input and output of entire objects to or from a file? Select all that apply, Select one or more: 1.Scanner 2.Formatter 3.ObjectInputStream 4.SerializedOutputStream 5.SerializedInputStream 6.ObjectOutputStream A serialized object is ________. Select one: 1.an object in memory that has been recreated from data in a file 2.a standard output stream object used to convert objects in code to data in a file 3.an object represented as a sequence of bytes used to store the objectâ€™s data in a file 4.none of the above Thank you! Solution 1) Data mainatined in files is often called transient data. 2) Scanner 3) an object represented as a sequence of bytes used to store the object\'s data in a file .

Java Language Which of the following statements is true- Select all th.docx

michael1810

It\'s virtualization topic Would anyone please expalin what is the different between these partitioning approaches?? Solution The comparision is given below: Bare-Metal Architecture: 1) Here administrator is not required to install the server\'s operating system. 2) Its does not have good hardware compatibility, becuase here we do not have OS here. 3) Here we have limited hardware support. 4) Its provides better performance, efficiency as well as the stability. 5) This architecture suit for various types of data centers, as its give good performance and stability Hosted Architecture: 1) Here its required to first install the server\'s operating system. 2) Its provide better hardware compatibility, as its having Operating System to handle the hardware. 3) Here we do not have limit on hardware support. 4) Not very good performance as well as stability as compare to Bare-Metal. 5) Does not suits for the data centers becuase of low performance. .

It-'s virtualization topic Would anyone please expalin what is the di.docx

michael1810

For each pair of substance identify the substance that is likely to have the lower vapor pressure. Using IMF to explain your reasoning. a. CO 2 or XeF 2 b. CH 3 OH or CH 3 -O-CH 3 Solution Always remeber VAPOUR PRESSURE TENDS TO DECREASE AS THE INTERMOLECULAR FORCES INCREASES. a. CO 2 and XeF 2 both are non polar but in case XeF 2 there are more lone pairs on the central atom which cause lone pair-lone pair repulson and bonds are easily broken so XeF 2 will have less intermolecular force of attraction while CO 2 having low vapour pressure as double bonds are holding 2 oxygen atoms to carbon atom having higher intermollecular force so CO 2 will have low vapour pressure. b.CH 3 OCH 3 will have the higher vapor pressure. . CH 3 OH can hydrogen bond. CH 3 OCH 3 is polar (bent shape around the oxygen), so dipole-dipole forces will be the strongest forces in this compound. .

For each pair of substance identify the substance that is likely to ha.docx

michael1810

For each of the requirements listed in the table below, 1 . Please identify it as functional requirement or non-functional requirement. 2 . Please provide an explanation for every non-functional requirement that you identified. Solution Non-functional requirements describe how the system works , while functional requirements describe what the system should do . Typical non-functional requirements are: F:Functional NF: Non-Functional .

For each of the requirements listed in the table below- 1- Please iden.docx

michael1810

For Contingent Liability: When do you disclose it? When do you record it? When do you ignore it? Solution Contingent liabilites can be divided into three classifcations: -Remote - There is a remote possibility that this will become a liability. A perfect example of this would be a frivolous lawsuit filed against your company with no sound legal reasoning. Those that are remote should be ignored. -Possible - It is possible for this to become a liablity, but possibly not during this accounting cycle. Many companies list these possible liabilites in the footnotes of their year-end financial statements, but are not show on any of the actual statments as a liability. If it is possible, it should be disclosed. -Probable - In this circumstance, the proposed liability is more than likely going to become a current or long-term liability. This may include an out-of court settlement where the company will be forced to pay a sum of money. Because it is probable, it should both be disclosed and recorded on the financial statements. Hope this helps! .

For Contingent Liability- When do you disclose it- When do you record.docx

michael1810

For each of the abstract data types (ADTs) that we have analyzed in this class we have implemented each of them in two different ways (Array-Based and Link-Based). Describe each of these implementations and discuss the differences between them. Solution Abstract data types can be implemented using array or linked list. but there are some major differences. linked list have some advantages over array. an array has some demerits. but a linked list overcomes all these demerits. Difference between Array Linked list : Array is a collection of homogeneous elements.it is a linear data structure. array have fixed size. once its size is declared, it cannot grow or shrink in size during execution. it has static memory of allocation. it stores data in contiguous memory locations. array is easily accessible. but it is difficult to perform insertion and deletion operations on an array.because during insertion or deletion each element after the specified element need to be moved one position right or left. Linked list is another way of storing elements in memory.it is a collection of data items called nodes. each node is divided into two parts called data field and pointer field. data field contains the element and pointer field contains the address of the next node in the list. the pointer field of the last node contains null value. it is a non-linear data structue. it doesn\'t require contiguous memory to store data in memory. it has dynamic memory of allocation. a linked list can grow or shrink in size during execution for its lifetime. the operations like insertion and deletion is easy to perform on linked list. because it stores data in non-contiguous memory location,so shifting of elements is not required. **************** THANKS ********************** PLS GIVE GOOD FEEDBACK********************************************* .

For each of the abstract data types (ADTs) that we have analyzed in th.docx

michael1810

For each form of transport plot the value of overall benefits against cost and hence identify the forms of transport that lie on the efficient frontier Solution Of course, no matter what form a tax takes, it is still a transfer payment-whether a direct tax on income or an indirect tax such as a sales tax, an excise tax, or a tariff or duty on an imported input for production. But some caution is advisable here. Taxes that are treated as a direct transfer payment are those representing a diversion of net benefit to the society. Quite often, however, government charges for goods supplied or services rendered may be called taxes. Water rates, for example, may be considered a tax by the farmer, but from the standpoint of the society as a whole they are a payment by the farmer to the irrigation authority in exchange for water supplied. Since building the irrigation system reduces national income, the farmer\'s payment for the water is part of the cost of producing the crop, the same as any other payment for a production input. Other payments called taxes may also be payments for goods and services rendered rather than transfers to the government. A stevedoring charge at the port is not a tax but a payment for services and so would not be treated as a duty would be. Whether a tax should be treated as a transfer payment or as a payment for goods and services depends on whether the payment is a compensation for goods and services needed to carry out the project or merely a transfer, to be used for general social purposes, of some part of the benefit from the project to the society as a whole. .

For each form of transport plot the value of overall benefits against.docx

michael1810

Fluid Mechanics The water surface is at the position shown at t = 0 seconds. What is the rate of rise or fall velocity of the water at t = 19 seconds? What is it at t = 21 seconds? Solution From the conservation of mass rho*Ai*V1 = rho*A*dh/dt + rho*Ae*V2 A*dh/dt = Ai*V1 - Ae*V2 D^2*dh/dt = Di^2*V1 - De^2*V2 144*dh/dt = 144*1 - 36*2 dh/dt = 0.5 dh = 0.5*dt Integrating h-h0 = 0.5*t Where ho is the initial height Delta(h) = 0.5*t When t = 19 sec Rise in water level is Delta(h) at t = 19 sec = 0.5*19 = 9.5 ft When t = 21 sec delta(h) = 10.5 ft Since the 10.5 >10 it will go to bigger tank then the rise is height is different delta(h) = 10 + h1 let us calcualate h1 Let\'s find in this way Assume that the entire tube is of at 12 in diameter and find the volume for this 0.5 ft extra and now replace the same volume of water with bigger diameter of pipe A*0.5 = A2*h1 12^2*0.5 = 24^2*h1 h1 = 0.125 ft Delta(h) = 10.125 ft .

Fluid Mechanics The water surface is at the position shown at t - 0 se.docx

michael1810

Fluctuation in inflation can occur in the short or long term. For examle, rice levels can increase and decrease on a month to month aisis and we can also evaluate inflation rates over time. Therefore, while it may be hard to redict the economic change it can be tracked over different time periods. One way we can think about inflation is that because of a loss in purchasing ower, there is basically a lower payout to investors. Are there any investing strategies that can be taken in order to rotect against this risk? Solution Investing startegies that can be taken to protect against inflation risk:- 1) Investing smartly in all types of investements like shares, real estate and golds . It will reduce the risk of inflation. 2) Short term investement in stocks and booking the profit instead of long terms. 3) Bonds are the most sensitive in the inflation, we should be extra careful with that. 4) Investors should maintain the portfolio highly flexible and liquidable during inflation. .

Fluctuation in inflation can occur in the short or long term- For exam.docx

michael1810

First National Bank charges 11.2 percent compounded monthly on its business loans. First United Bank Charges 11.4 Percent compounded semiannually. Calculate the EAR for each bank. For each of the following annuities, calculate the annual cash flow. Solution First National Bank, r = 11.2 %, m = 12 EAR =( 1+ 11.2%/12) 12 -1Â Â = 11.79% First United Bank, r = 11.4%, m = 2 = (1 + 0.114/2) 2 - 1 = 0.1172 or 11.72% .

First National Bank charges 11-2 percent compounded monthly on its bus (1).docx

michael1810

More from michael1810 (18)