It is important that budgets be accepted by Question 16 options- supe.docx
•Download as DOCX, PDF•
0 likes•4 views
It is important that budgets be accepted by Question 16 options: supervisors. all of these answers are correct. department heads. division managers. An overly optimistic sales budget may result in Question 17 options: increases in selling prices late in the year. increased sales during the year. insufficient inventories. excessive inventories. If the required direct materials purchases are 36,000 pounds, the direct materials required for production is three times the direct materials purchases, and the beginning direct materials are three and a half times the direct materials purchases, what are the desired ending direct materials in pounds? Question 18 options: 54,000 90,000 18,000 36,000 The single most important output in preparing financial budgets is the Question 19 options: budgeted income statement. determination of the unit cost of the product. sales forecast. cash budget. Which one of the following budgets would be prepared for a manufacturer but not for a merchandiser? Question 20 options: Sales budget Budgeted income statement Cash budget Direct labor budget Solution Solution 16. All of these are correct. Solution 17. Insufficient inventories. Solution 18. Purchases = 36000 Consumption = 36000*3 = 108000 Opening stock = 36000*3.5 = 126000 Closing stock = Opening stock + Purchases - Consumption = 126000 + 36000 - 108000 = 54000 pounds Solution 19. Cash Budget. Solution 20. Direct labor budget. .
Report
Share
Report
Share
Recommended
Strayer university acc 566 (6)
Get professional solution for assignment help,homework help,easy writing help,and This is Writing for all Universities in USA,UK,and Australia.
General and administrative expenses, income taxes, and finally the net income
This document provides 30 multiple choice questions related to accounting concepts. The questions cover topics such as organizational structures, the accounting equation, revenue and expense recognition principles, inventory methods, financial ratios, and internal controls. Sample questions ask about the normal balance of a revenue account, which accounts have debit balances, and examples of internal control procedures.
Case study circles
This document provides numerous examples of how data analytics and targeted marketing campaigns have significantly increased sales and profits for various companies. Key outcomes include boosting sales by 58% during promotions and sustaining increases, generating a 23% volume increase from targeting only 2.3% of households, growing a customer database from 182K to 820K and predicting over 70% of booking revenue, and increasing total sales revenue by 9% and profits by £4M with an 8:1 return on investment. The examples demonstrate data-driven strategies can effectively increase response rates, discover important customer segments, differentiate products, and optimize processes to improve business performance.
Chap018
This document discusses long-term financial planning. It explains that long-term planning focuses on goals, investments, financing needs, dividend policies and debt ratios. Percentage of sales models are introduced, where sales forecasts drive most other variables. Planning models can explore alternative strategies but do not determine the best plan or whether growth creates shareholder value. External financing may be needed if growth exceeds the internal growth rate, which is the maximum sustainable without new funds.
MGT285-3. ECONOMICS (MGT285-3) TAKE ASSESSMENT EXAM 2Take A.docx
MGT285-3. ECONOMICS (MGT285-3) > TAKE ASSESSMENT: EXAM 2
Take Assessment: Exam 2
Top of Form
true
HTMLCONTROL Forms.HTML:Hidden.1
_3089_1
HTMLCONTROL Forms.HTML:Hidden.1
_675_1
HTMLCONTROL Forms.HTML:Hidden.1
_60617_1
HTMLCONTROL Forms.HTML:Hidden.1
null
HTMLCONTROL Forms.HTML:Hidden.1
_4656_1
Figure 6.4
Using Figure 6.4, the breakeven price for the perfectly competitive firm will be
P1.
P4.
P3.
P2.
Question 2
2 points
Save
A firm that faces a downward sloping demand curve is
a price setter.
a price taker.
a price provider.
a price creator.
Question 3
2 points
Save
Profit is maximized where
total revenues are greater than total costs.
marginal revenue equals marginal cost.
accounting profits are equal to zero.
accounting profit exceeds economic profit.
Question 4
2 points
Save
Clothing retailers have faced greater competition in recent years as more firms have entered the clothing market. Some has come from foreign competitors, but much of it is domestic competition. As a result there is much competition and
individual buyers and sellers cannot affect the market price; it is determined by the market forces of demand and supply.
firms have a great degree of flexibility in pricing their products; these products can be sold at a high profit level.
there are relatively few buyers and sellers in the market, and one individual firm can determine the market price.
most individuals cannot afford clothing.
Question 5
2 points
Save
A perfectly competitive firm finds that its total revenue is $74,000 and its total costs are $80,000. If its total variable costs are $75,000, what should the firm do?
decrease its selling price
shut down immediately
increase its selling price
continue to produce at the current price and quantity combination
Question 6
2 points
Save
All of the following are characteristics of a perfectly competitive market EXCEPT
high barriers to entry and exit.
buyers and seller have equal access to information.
large number of buyers and sellers.
homogeneous product.
Question 7
2 points
Save
A perfectly competitive firm earning zero economic profit
is not covering its variable costs.
is earning an accounting profit equal to the normal rate of return.
is not covering the opportunity cost of the resources it is using.
is earning an accounting profit of zero.
Question 8
2 points
Save
The demand curve for the perfectly competitive firm is
perfectly inelastic.
perfectly elastic.
downward sloping.
unit elastic.
Question 9
2 points
Save
When the perfectly competitive firm is making zero economic profit, it is earning a level of accounting profit equal to the normal rate of return.
True
False
Question 10
2 points
Save
A cartel is a monopoly arising from a patent.
True
False
Ques ...
Cost & Management Accounting
Cost & Management Accounting
We also provide synopsis and project.
Contact www.kimsharma.co.in for best and lowest cost solution or
Email: amitymbaassignment@gmail.com
Call: 9971223030
207285085 classic-knitwear-case-study
homework help,online homework help,online tutors,online tutoring,research paper help,do my homework,
https://www.homeworkping.com/
Busi 530 week 4 homework 4
busi 530 week 4 homework 4 solutions,3 sets,busi 530,busi 530,busi 530 week 4 tutorial,busi 530 week 4 assignment,busi 530 week 4 help
Recommended
Strayer university acc 566 (6)
Get professional solution for assignment help,homework help,easy writing help,and This is Writing for all Universities in USA,UK,and Australia.
General and administrative expenses, income taxes, and finally the net income
This document provides 30 multiple choice questions related to accounting concepts. The questions cover topics such as organizational structures, the accounting equation, revenue and expense recognition principles, inventory methods, financial ratios, and internal controls. Sample questions ask about the normal balance of a revenue account, which accounts have debit balances, and examples of internal control procedures.
Case study circles
This document provides numerous examples of how data analytics and targeted marketing campaigns have significantly increased sales and profits for various companies. Key outcomes include boosting sales by 58% during promotions and sustaining increases, generating a 23% volume increase from targeting only 2.3% of households, growing a customer database from 182K to 820K and predicting over 70% of booking revenue, and increasing total sales revenue by 9% and profits by £4M with an 8:1 return on investment. The examples demonstrate data-driven strategies can effectively increase response rates, discover important customer segments, differentiate products, and optimize processes to improve business performance.
Chap018
This document discusses long-term financial planning. It explains that long-term planning focuses on goals, investments, financing needs, dividend policies and debt ratios. Percentage of sales models are introduced, where sales forecasts drive most other variables. Planning models can explore alternative strategies but do not determine the best plan or whether growth creates shareholder value. External financing may be needed if growth exceeds the internal growth rate, which is the maximum sustainable without new funds.
MGT285-3. ECONOMICS (MGT285-3) TAKE ASSESSMENT EXAM 2Take A.docx
MGT285-3. ECONOMICS (MGT285-3) > TAKE ASSESSMENT: EXAM 2
Take Assessment: Exam 2
Top of Form
true
HTMLCONTROL Forms.HTML:Hidden.1
_3089_1
HTMLCONTROL Forms.HTML:Hidden.1
_675_1
HTMLCONTROL Forms.HTML:Hidden.1
_60617_1
HTMLCONTROL Forms.HTML:Hidden.1
null
HTMLCONTROL Forms.HTML:Hidden.1
_4656_1
Figure 6.4
Using Figure 6.4, the breakeven price for the perfectly competitive firm will be
P1.
P4.
P3.
P2.
Question 2
2 points
Save
A firm that faces a downward sloping demand curve is
a price setter.
a price taker.
a price provider.
a price creator.
Question 3
2 points
Save
Profit is maximized where
total revenues are greater than total costs.
marginal revenue equals marginal cost.
accounting profits are equal to zero.
accounting profit exceeds economic profit.
Question 4
2 points
Save
Clothing retailers have faced greater competition in recent years as more firms have entered the clothing market. Some has come from foreign competitors, but much of it is domestic competition. As a result there is much competition and
individual buyers and sellers cannot affect the market price; it is determined by the market forces of demand and supply.
firms have a great degree of flexibility in pricing their products; these products can be sold at a high profit level.
there are relatively few buyers and sellers in the market, and one individual firm can determine the market price.
most individuals cannot afford clothing.
Question 5
2 points
Save
A perfectly competitive firm finds that its total revenue is $74,000 and its total costs are $80,000. If its total variable costs are $75,000, what should the firm do?
decrease its selling price
shut down immediately
increase its selling price
continue to produce at the current price and quantity combination
Question 6
2 points
Save
All of the following are characteristics of a perfectly competitive market EXCEPT
high barriers to entry and exit.
buyers and seller have equal access to information.
large number of buyers and sellers.
homogeneous product.
Question 7
2 points
Save
A perfectly competitive firm earning zero economic profit
is not covering its variable costs.
is earning an accounting profit equal to the normal rate of return.
is not covering the opportunity cost of the resources it is using.
is earning an accounting profit of zero.
Question 8
2 points
Save
The demand curve for the perfectly competitive firm is
perfectly inelastic.
perfectly elastic.
downward sloping.
unit elastic.
Question 9
2 points
Save
When the perfectly competitive firm is making zero economic profit, it is earning a level of accounting profit equal to the normal rate of return.
True
False
Question 10
2 points
Save
A cartel is a monopoly arising from a patent.
True
False
Ques ...
Cost & Management Accounting
Cost & Management Accounting
We also provide synopsis and project.
Contact www.kimsharma.co.in for best and lowest cost solution or
Email: amitymbaassignment@gmail.com
Call: 9971223030
207285085 classic-knitwear-case-study
homework help,online homework help,online tutors,online tutoring,research paper help,do my homework,
https://www.homeworkping.com/
Busi 530 week 4 homework 4
busi 530 week 4 homework 4 solutions,3 sets,busi 530,busi 530,busi 530 week 4 tutorial,busi 530 week 4 assignment,busi 530 week 4 help
Judging from their relative positions in the Periodic Table- which ato.docx
Judging from their relative positions in the Periodic Table, which atom in each set is more
electronegative?
(a) Carbon or nitrogen (b) Chlorine or bromine (c) Oxygen or sulfur
Solution
a) carbon and nitrogen
Ans - Nitrogen
both carbon and nitrogen belong to II nd period of periodic table in same period trend of electronegattivity is from left to right electronegativity increases. nitrogen is one place right from carbon therefore nitrogen in more electronegative than carbon.
b) Chlorine and bromine
Ans - Chlorine
Chlorine and bromine belong to same group of halogen familly trend for elecronegativity in same group is from up to down electronegativity decreases. bromine is down than chlorine in group therefore bromine have less electronegativity and chlorine have more electronegativity than bromine.
c) Oxygen and sulfur
Ans - Oxygen
oxygen and sulfur belong to same group of 6A trend for elecronegativity in same group is from up to down electronegativity decreases. sufur is down than oxygen in group therefore sulfur have less electronegativity and oxygen have more electronegativity than sulfur.
.
John Corporation has three investments that are classified as noncontr.docx
John Corporation has three investments that are classified as noncontrolling.
1.A bond investment, purchased on Jan 1, 2014 and maturing on Dec. 31, 2020. They purchased them to help out the company and the interest income was quite high.
2. An investment in Mark Company stock, purchased on Dec. 1, 2014 because the price was low and John Corp. had some excess cash to invest. John Corporation\'s investment manager did not like taking risk or playing the market on an active basis.
3. An investment in 25% of the stock of Smith Company, a new customer who was experiencing management difficulties that affected their profitability. John Corp. intended to keep this investment for as long as it took to stabilize the company.
Answer the following questions about these investments.
1. The investment in bonds should be classified as:
Select one:
a. held-to-maturity securities
b. trading securities
c. significant influence securities
d. available-for-sale securities
2. The investment in Mark Company stock should be classified as:
Select one:
a. trading securities
b. available-for-sale securities
c. significant influence securities
d. held-to-maturity securities
3. The investment in Smith Company stock should be classified as:
Select one:
a. held-to-maturity securities
b. trading securities
c. available-for-sale securities
d. significant influence securities
Solution
Bonds are d. available-for-sale securities
Reason is that they were bought to help out other company rather than making money out of it.
Investment in Mark company is reffered to as d. held-to-maturity securities
Investment in Smith Company is reffered to as d. significant influence securities as these stocks amount to 25%. Stock holing of 20 to 50% is refferef to as Significant influence securities.
.
John Smith worked in the stockyard of a large building supply company-.docx
John Smith worked in the stockyard of a large building supply company. One day he unexpectedly left for California, never to return. His foreman seized the opportunity to continue to submit time cards for John to the payroll department. Each week, as part of his normal duties, the foreman received the employee paychecks from payroll and distributed them to the workers on his shift. Because John was not present to collect his paycheck, the foreman forged John
Solution
In the given circumstances, these two internal controls can be implemented to prevent & detect fraud-
1. The practice of giving paychecks to the foreman should be done away with. Instead each employee should personally visit the payroll department, put his signature and then collect his or her paycheck.
2.For attendance purpose also the employees should visit the payroll department where the time keeper will personally accept each one\'s time card. Time card furnished through a colleage or friend should never be accepted.
.
John has tremendous technical skills and frequently comes up with valu.docx
John has tremendous technical skills and frequently comes up with valuable ideas. However, he has little idea how to promote it within the organization. John is a good example of
a.
an inventor.
b.
an idea champion.
c.
a sponsor.
d.
a critic.
e.
an in-transition employee.
Solution
a.
Inventor is the one who develops and understands technical aspects of idea. Inventor has no knowledge or less knowledge of converting the idea into a business.
Though John has a tremendous technical skills but he has little knowledge of promoting the idea. Thus, he is an INVENTOR.
.
Joe Frecaso was recently hired as the controller for Larson Cement Com.docx
Joe Frecaso was recently hired as the controller for Larson Cement Company after the previous controller was killed in a boating accident in Biscayne Bay. That controller had been with the company since it first opened its doors. Joe spends most of his time in the back office that has a panoramic view of
Solution
1. Frank and Joe have realized that the checks payable to Mary Waters is being done fraudently. Betty is responsible for the checkbooks and she keeps the checkbook locked in safe. So it is quite clear that Betty has been fraudently writing the checks being paid to Mary Waters and Frank and Joe are quite on target at this assumption.
However, they could do better by confronting Betty and initiating a legal suit against her for causing losses to the company. They should be more aggressive and action-oriented than just putting a camera at her office and conducting an audit. She should be immediately confronted, enquired upon and if found guilty of these wrong doings should be immediately fired. Subsequently, legal action should be taken against her.
2. Clearly the internal control processes is quite weak at Larson\'s Cement. Joe, as the controller, should be knowing the accounting and finance department\'s workings in and out. However, he was shocked to learn about the account being overdrawn. Its just Frank, the current CEO, who seems to be hands on. Other employees also need to be more hands on, specially Joe who is responsible for the company\'s control process. Its no excuse that Betty is responsible for the checks, so she should be the only one having information about them. This is a clear gap in the control system of the company, inviting wrong doings by the employees. This gap needs to be filled.
.
Java Write a method that takes as a parameter a one dimensional array.docx
Java Write a method that takes as a parameter a one dimensional array of characters and moves all characters ’*’ to the end
(high indexes) of the array. If the original array is
’a’ ’b’ ’*’ ’d’ ’z’ ’*’ ’*’ ’p’
then your method should produce
’a’ ’b’ ’d’ ’z’ ’p’ ’*’ ’*’ ’*’
The relative positions of the other characters should remain unchanged.
REMEMBER : Write a complete method (including methods signature with parameters and return type). DO NOT write a complete
program with main, etc. Your method should manipulate the array that is passed to it.
Solution
public class MoveStar {
public static void moveStar(char[] arr){
if(arr == null)
return;
int j = -1;
for(int i=0; i<arr.length; i++){// skipping star
if(arr[i] !=\'*\'){
arr[++j] = arr[i];
}
}
while(++j < arr.length)// filling remaining position with *
arr[j] = \'*\';
}
public static void main(String[] args) {
char[] arr = {\'a\', \'b\' ,\'*\' ,\'d\' ,\'z\',\'*\', \'*\' ,\'p\'};
moveStar(arr);
for(char c: arr)
System.out.print(c+\" \");
}
}
.
Java Programming- 1) Write a recursive method that finds and returns t.docx
Java Programming:
1) Write a recursive method that finds and returns the sum of the elements in an int array. Also, write a program to test your method
** Please simple enough for a beginner to understand
Solution
/**
* @author
*
*/
public class RecusrsiveArraySum {
/**
* @param args
*/
public static void main(String[] args) {
int arr[] = { 3, 4, 6, 7 };
System.out
.println(\"Sum of array Elements: \" + sum(arr, arr.length - 1));
}
/**
* recursive sum of array elements
*
* @param array
* @param index
* @return
*/
public static int sum(int[] array, int index) {
// if array is empty
if (index < 0)
return 0;
if (index == 0) {
// when no index reaches first element
return array[0];
} else {
// adding array elements
return array[index] + sum(array, index - 1);
}
}
}
OUTPUT:
Sum of array Elements: 20
.
JAVA Q2- Write a program that reads strings from the user and writes t.docx
JAVA
Q2: Write a program that reads strings from the user and writes them to an output file called userStrings.txt. Stop processing when the user enters the string \"DONE\". Do not write the sentinel string (\"DONE\") to the output file. [15 points] Hint: For a complete example of file IO, please see the attached TestData program.
Sample Output:
A string.
Another string.
Yet more text...
DONE
Solution
Answer
import java.io.File;
import java.io.FileOutputStream;
import java.io.IOException;
import java.util.Scanner;
class WriteStringFile {
public static void main(String[] args) {
File file = new File(\"D:/userFile.txt\");
String data;
Scanner input = new Scanner(System.in);
data = input.readLine();
try (FileOutputStream fop = new FileOutputStream(file)) {
// if file doesn\'t exists, then create it
if (!file.exists()) {
file.createNewFile();
}
if (data != \"DONE\") {
// get the content in bytes
byte[] contentInBytes = content.getBytes();
fop.write(contentInBytes);
fop.flush();
fop.close();
} else {
System.out.println(\"User Enter the value Done.. So unable to write into file\");
}
} catch (IOException e) {
e.printStackTrace();
}
}
}
.
Java Language Which of the following statements is true- Select all th.docx
Java Language
Which of the following statements is true? Select all that apply.
Select one or more:
1.Data maintained in files is often called transient data.
2.Data is lost when a local variable “goes out of scope.â€
3.Files are used for long-term retention of large amounts of data.
4.Storage of data variables and arrays is temporary.
Which of the following classes enable input and output of entire objects to or from a file? Select all that apply,
Select one or more:
1.Scanner
2.Formatter
3.ObjectInputStream
4.SerializedOutputStream
5.SerializedInputStream
6.ObjectOutputStream
A serialized object is ________.
Select one:
1.an object in memory that has been recreated from data in a file
2.a standard output stream object used to convert objects in code to data in a file
3.an object represented as a sequence of bytes used to store the object’s data in a file
4.none of the above
Thank you!
Solution
1) Data mainatined in files is often called transient data.
2) Scanner
3) an object represented as a sequence of bytes used to store the object\'s data in a file
.
It-'s virtualization topic Would anyone please expalin what is the di.docx
It\'s virtualization topic
Would anyone please expalin what is the different between these partitioning approaches??
Solution
The comparision is given below:
Bare-Metal Architecture:
1) Here administrator is not required to install the server\'s operating system.
2) Its does not have good hardware compatibility, becuase here we do not have OS here.
3) Here we have limited hardware support.
4) Its provides better performance, efficiency as well as the stability.
5) This architecture suit for various types of data centers, as its give good performance and stability
Hosted Architecture:
1) Here its required to first install the server\'s operating system.
2) Its provide better hardware compatibility, as its having Operating System to handle the hardware.
3) Here we do not have limit on hardware support.
4) Not very good performance as well as stability as compare to Bare-Metal.
5) Does not suits for the data centers becuase of low performance.
.
For each pair of substance identify the substance that is likely to ha.docx
CO2 will have the lower vapor pressure than XeF2 because CO2 has stronger intermolecular forces of attraction due to the double bonds between the carbon and oxygen atoms. CH3OH will have the lower vapor pressure than CH3-O-CH3 because CH3OH can form hydrogen bonds between molecules, whereas CH3-O-CH3 only has weaker dipole-dipole interactions. Vapor pressure tends to decrease as intermolecular forces increase.
For each of the requirements listed in the table below- 1- Please iden.docx
For each of the requirements listed in the table below,
1 . Please identify it as functional requirement or non-functional requirement.
2 . Please provide an explanation for every non-functional requirement that you identified.
Solution
Non-functional requirements describe how the system works , while functional requirements describe what the system should do .
Typical non-functional requirements are:
F:Functional
NF: Non-Functional
.
For Contingent Liability- When do you disclose it- When do you record.docx
For Contingent Liability:
When do you disclose it?
When do you record it?
When do you ignore it?
Solution
Contingent liabilites can be divided into three classifcations:
-Remote - There is a remote possibility that this will become a liability. A perfect example of this would be a frivolous lawsuit filed against your company with no sound legal reasoning. Those that are remote should be ignored.
-Possible - It is possible for this to become a liablity, but possibly not during this accounting cycle. Many companies list these possible liabilites in the footnotes of their year-end financial statements, but are not show on any of the actual statments as a liability. If it is possible, it should be disclosed.
-Probable - In this circumstance, the proposed liability is more than likely going to become a current or long-term liability. This may include an out-of court settlement where the company will be forced to pay a sum of money. Because it is probable, it should both be disclosed and recorded on the financial statements.
Hope this helps!
.
For each of the abstract data types (ADTs) that we have analyzed in th.docx
For each of the abstract data types (ADTs) that we have analyzed in this class we have implemented each of them in two different ways (Array-Based and Link-Based). Describe each of these implementations and discuss the differences between them.
Solution
Abstract data types can be implemented using array or linked list. but there are some major differences. linked list have some advantages over array. an array has some demerits. but a linked list overcomes all these demerits.
Difference between Array Linked list :
Array is a collection of homogeneous elements.it is a linear data structure. array have fixed size. once its size is declared, it cannot grow or shrink in size during execution. it has static memory of allocation. it stores data in contiguous memory locations. array is easily accessible. but it is difficult to perform insertion and deletion operations on an array.because during insertion or deletion each element after the specified element need to be moved one position right or left.
Linked list is another way of storing elements in memory.it is a collection of data items called nodes. each node is divided into two parts called data field and pointer field. data field contains the element and pointer field contains the address of the next node in the list. the pointer field of the last node contains null value.
it is a non-linear data structue. it doesn\'t require contiguous memory to store data in memory. it has dynamic memory of allocation. a linked list can grow or shrink in size during execution for its lifetime. the operations like insertion and deletion is easy to perform on linked list. because it stores data in non-contiguous memory location,so shifting of elements is not required.
**************** THANKS ********************** PLS GIVE GOOD FEEDBACK*********************************************
.
For each form of transport plot the value of overall benefits against.docx
For each form of transport plot the value of overall benefits against cost and hence identify the forms of transport that lie on the efficient frontier
Solution
Of course, no matter what form a tax takes, it is still a transfer payment-whether a direct tax on income or an indirect tax such as a sales tax, an excise tax, or a tariff or duty on an imported input for production. But some caution is advisable here. Taxes that are treated as a direct transfer payment are those representing a diversion of net benefit to the society. Quite often, however, government charges for goods supplied or services rendered may be called taxes. Water rates, for example, may be considered a tax by the farmer, but from the standpoint of the society as a whole they are a payment by the farmer to the irrigation authority in exchange for water supplied. Since building the irrigation system reduces national income, the farmer\'s payment for the water is part of the cost of producing the crop, the same as any other payment for a production input. Other payments called taxes may also be payments for goods and services rendered rather than transfers to the government. A stevedoring charge at the port is not a tax but a payment for services and so would not be treated as a duty would be. Whether a tax should be treated as a transfer payment or as a payment for goods and services depends on whether the payment is a compensation for goods and services needed to carry out the project or merely a transfer, to be used for general social purposes, of some part of the benefit from the project to the society as a whole.
.
Fluid Mechanics The water surface is at the position shown at t - 0 se.docx
Fluid Mechanics
The water surface is at the position shown at t = 0 seconds. What is the rate of rise or fall velocity of the water at t = 19 seconds? What is it at t = 21 seconds?
Solution
From the conservation of mass
rho*Ai*V1 = rho*A*dh/dt + rho*Ae*V2
A*dh/dt = Ai*V1 - Ae*V2
D^2*dh/dt = Di^2*V1 - De^2*V2
144*dh/dt = 144*1 - 36*2
dh/dt = 0.5
dh = 0.5*dt
Integrating
h-h0 = 0.5*t
Where ho is the initial height
Delta(h) = 0.5*t
When t = 19 sec
Rise in water level is
Delta(h) at t = 19 sec = 0.5*19 = 9.5 ft
When t = 21 sec
delta(h) = 10.5 ft
Since the 10.5 >10 it will go to bigger tank then the rise is height is different
delta(h) = 10 + h1
let us calcualate h1
Let\'s find in this way
Assume that the entire tube is of at 12 in diameter and find the volume for this 0.5 ft extra
and now replace the same volume of water with bigger diameter of pipe
A*0.5 = A2*h1
12^2*0.5 = 24^2*h1
h1 = 0.125 ft
Delta(h) = 10.125 ft
.
Fluctuation in inflation can occur in the short or long term- For exam.docx
Fluctuation in inflation can occur in the short or long term. For examle, rice levels can increase and decrease on a month to month aisis and we can also evaluate inflation rates over time. Therefore, while it may be hard to redict the economic change it can be tracked over different time periods. One way we can think about inflation is that because of a loss in purchasing ower, there is basically a lower payout to investors. Are there any investing strategies that can be taken in order to rotect against this risk?
Solution
Investing startegies that can be taken to protect against inflation risk:-
1) Investing smartly in all types of investements like shares, real estate and golds . It will reduce the risk of inflation.
2) Short term investement in stocks and booking the profit instead of long terms.
3) Bonds are the most sensitive in the inflation, we should be extra careful with that.
4) Investors should maintain the portfolio highly flexible and liquidable during inflation.
.
First National Bank charges 11-2 percent compounded monthly on its bus (1).docx
First National Bank charges 11.2 percent compounded monthly on its business loans. First United Bank Charges 11.4 Percent compounded semiannually. Calculate the EAR for each bank. For each of the following annuities, calculate the annual cash flow.
Solution
First National Bank, r = 11.2 %, m = 12
EAR =( 1+ 11.2%/12) 12 -1Â Â = 11.79%
First United Bank, r = 11.4%, m = 2
= (1 + 0.114/2) 2 - 1 = 0.1172 or 11.72%
.
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
More Related Content
More from michael1810
Judging from their relative positions in the Periodic Table- which ato.docx
Judging from their relative positions in the Periodic Table, which atom in each set is more
electronegative?
(a) Carbon or nitrogen (b) Chlorine or bromine (c) Oxygen or sulfur
Solution
a) carbon and nitrogen
Ans - Nitrogen
both carbon and nitrogen belong to II nd period of periodic table in same period trend of electronegattivity is from left to right electronegativity increases. nitrogen is one place right from carbon therefore nitrogen in more electronegative than carbon.
b) Chlorine and bromine
Ans - Chlorine
Chlorine and bromine belong to same group of halogen familly trend for elecronegativity in same group is from up to down electronegativity decreases. bromine is down than chlorine in group therefore bromine have less electronegativity and chlorine have more electronegativity than bromine.
c) Oxygen and sulfur
Ans - Oxygen
oxygen and sulfur belong to same group of 6A trend for elecronegativity in same group is from up to down electronegativity decreases. sufur is down than oxygen in group therefore sulfur have less electronegativity and oxygen have more electronegativity than sulfur.
.
John Corporation has three investments that are classified as noncontr.docx
John Corporation has three investments that are classified as noncontrolling.
1.A bond investment, purchased on Jan 1, 2014 and maturing on Dec. 31, 2020. They purchased them to help out the company and the interest income was quite high.
2. An investment in Mark Company stock, purchased on Dec. 1, 2014 because the price was low and John Corp. had some excess cash to invest. John Corporation\'s investment manager did not like taking risk or playing the market on an active basis.
3. An investment in 25% of the stock of Smith Company, a new customer who was experiencing management difficulties that affected their profitability. John Corp. intended to keep this investment for as long as it took to stabilize the company.
Answer the following questions about these investments.
1. The investment in bonds should be classified as:
Select one:
a. held-to-maturity securities
b. trading securities
c. significant influence securities
d. available-for-sale securities
2. The investment in Mark Company stock should be classified as:
Select one:
a. trading securities
b. available-for-sale securities
c. significant influence securities
d. held-to-maturity securities
3. The investment in Smith Company stock should be classified as:
Select one:
a. held-to-maturity securities
b. trading securities
c. available-for-sale securities
d. significant influence securities
Solution
Bonds are d. available-for-sale securities
Reason is that they were bought to help out other company rather than making money out of it.
Investment in Mark company is reffered to as d. held-to-maturity securities
Investment in Smith Company is reffered to as d. significant influence securities as these stocks amount to 25%. Stock holing of 20 to 50% is refferef to as Significant influence securities.
.
John Smith worked in the stockyard of a large building supply company-.docx
John Smith worked in the stockyard of a large building supply company. One day he unexpectedly left for California, never to return. His foreman seized the opportunity to continue to submit time cards for John to the payroll department. Each week, as part of his normal duties, the foreman received the employee paychecks from payroll and distributed them to the workers on his shift. Because John was not present to collect his paycheck, the foreman forged John
Solution
In the given circumstances, these two internal controls can be implemented to prevent & detect fraud-
1. The practice of giving paychecks to the foreman should be done away with. Instead each employee should personally visit the payroll department, put his signature and then collect his or her paycheck.
2.For attendance purpose also the employees should visit the payroll department where the time keeper will personally accept each one\'s time card. Time card furnished through a colleage or friend should never be accepted.
.
John has tremendous technical skills and frequently comes up with valu.docx
John has tremendous technical skills and frequently comes up with valuable ideas. However, he has little idea how to promote it within the organization. John is a good example of
a.
an inventor.
b.
an idea champion.
c.
a sponsor.
d.
a critic.
e.
an in-transition employee.
Solution
a.
Inventor is the one who develops and understands technical aspects of idea. Inventor has no knowledge or less knowledge of converting the idea into a business.
Though John has a tremendous technical skills but he has little knowledge of promoting the idea. Thus, he is an INVENTOR.
.
Joe Frecaso was recently hired as the controller for Larson Cement Com.docx
Joe Frecaso was recently hired as the controller for Larson Cement Company after the previous controller was killed in a boating accident in Biscayne Bay. That controller had been with the company since it first opened its doors. Joe spends most of his time in the back office that has a panoramic view of
Solution
1. Frank and Joe have realized that the checks payable to Mary Waters is being done fraudently. Betty is responsible for the checkbooks and she keeps the checkbook locked in safe. So it is quite clear that Betty has been fraudently writing the checks being paid to Mary Waters and Frank and Joe are quite on target at this assumption.
However, they could do better by confronting Betty and initiating a legal suit against her for causing losses to the company. They should be more aggressive and action-oriented than just putting a camera at her office and conducting an audit. She should be immediately confronted, enquired upon and if found guilty of these wrong doings should be immediately fired. Subsequently, legal action should be taken against her.
2. Clearly the internal control processes is quite weak at Larson\'s Cement. Joe, as the controller, should be knowing the accounting and finance department\'s workings in and out. However, he was shocked to learn about the account being overdrawn. Its just Frank, the current CEO, who seems to be hands on. Other employees also need to be more hands on, specially Joe who is responsible for the company\'s control process. Its no excuse that Betty is responsible for the checks, so she should be the only one having information about them. This is a clear gap in the control system of the company, inviting wrong doings by the employees. This gap needs to be filled.
.
Java Write a method that takes as a parameter a one dimensional array.docx
Java Write a method that takes as a parameter a one dimensional array of characters and moves all characters ’*’ to the end
(high indexes) of the array. If the original array is
’a’ ’b’ ’*’ ’d’ ’z’ ’*’ ’*’ ’p’
then your method should produce
’a’ ’b’ ’d’ ’z’ ’p’ ’*’ ’*’ ’*’
The relative positions of the other characters should remain unchanged.
REMEMBER : Write a complete method (including methods signature with parameters and return type). DO NOT write a complete
program with main, etc. Your method should manipulate the array that is passed to it.
Solution
public class MoveStar {
public static void moveStar(char[] arr){
if(arr == null)
return;
int j = -1;
for(int i=0; i<arr.length; i++){// skipping star
if(arr[i] !=\'*\'){
arr[++j] = arr[i];
}
}
while(++j < arr.length)// filling remaining position with *
arr[j] = \'*\';
}
public static void main(String[] args) {
char[] arr = {\'a\', \'b\' ,\'*\' ,\'d\' ,\'z\',\'*\', \'*\' ,\'p\'};
moveStar(arr);
for(char c: arr)
System.out.print(c+\" \");
}
}
.
Java Programming- 1) Write a recursive method that finds and returns t.docx
Java Programming:
1) Write a recursive method that finds and returns the sum of the elements in an int array. Also, write a program to test your method
** Please simple enough for a beginner to understand
Solution
/**
* @author
*
*/
public class RecusrsiveArraySum {
/**
* @param args
*/
public static void main(String[] args) {
int arr[] = { 3, 4, 6, 7 };
System.out
.println(\"Sum of array Elements: \" + sum(arr, arr.length - 1));
}
/**
* recursive sum of array elements
*
* @param array
* @param index
* @return
*/
public static int sum(int[] array, int index) {
// if array is empty
if (index < 0)
return 0;
if (index == 0) {
// when no index reaches first element
return array[0];
} else {
// adding array elements
return array[index] + sum(array, index - 1);
}
}
}
OUTPUT:
Sum of array Elements: 20
.
JAVA Q2- Write a program that reads strings from the user and writes t.docx
JAVA
Q2: Write a program that reads strings from the user and writes them to an output file called userStrings.txt. Stop processing when the user enters the string \"DONE\". Do not write the sentinel string (\"DONE\") to the output file. [15 points] Hint: For a complete example of file IO, please see the attached TestData program.
Sample Output:
A string.
Another string.
Yet more text...
DONE
Solution
Answer
import java.io.File;
import java.io.FileOutputStream;
import java.io.IOException;
import java.util.Scanner;
class WriteStringFile {
public static void main(String[] args) {
File file = new File(\"D:/userFile.txt\");
String data;
Scanner input = new Scanner(System.in);
data = input.readLine();
try (FileOutputStream fop = new FileOutputStream(file)) {
// if file doesn\'t exists, then create it
if (!file.exists()) {
file.createNewFile();
}
if (data != \"DONE\") {
// get the content in bytes
byte[] contentInBytes = content.getBytes();
fop.write(contentInBytes);
fop.flush();
fop.close();
} else {
System.out.println(\"User Enter the value Done.. So unable to write into file\");
}
} catch (IOException e) {
e.printStackTrace();
}
}
}
.
Java Language Which of the following statements is true- Select all th.docx
Java Language
Which of the following statements is true? Select all that apply.
Select one or more:
1.Data maintained in files is often called transient data.
2.Data is lost when a local variable “goes out of scope.â€
3.Files are used for long-term retention of large amounts of data.
4.Storage of data variables and arrays is temporary.
Which of the following classes enable input and output of entire objects to or from a file? Select all that apply,
Select one or more:
1.Scanner
2.Formatter
3.ObjectInputStream
4.SerializedOutputStream
5.SerializedInputStream
6.ObjectOutputStream
A serialized object is ________.
Select one:
1.an object in memory that has been recreated from data in a file
2.a standard output stream object used to convert objects in code to data in a file
3.an object represented as a sequence of bytes used to store the object’s data in a file
4.none of the above
Thank you!
Solution
1) Data mainatined in files is often called transient data.
2) Scanner
3) an object represented as a sequence of bytes used to store the object\'s data in a file
.
It-'s virtualization topic Would anyone please expalin what is the di.docx
It\'s virtualization topic
Would anyone please expalin what is the different between these partitioning approaches??
Solution
The comparision is given below:
Bare-Metal Architecture:
1) Here administrator is not required to install the server\'s operating system.
2) Its does not have good hardware compatibility, becuase here we do not have OS here.
3) Here we have limited hardware support.
4) Its provides better performance, efficiency as well as the stability.
5) This architecture suit for various types of data centers, as its give good performance and stability
Hosted Architecture:
1) Here its required to first install the server\'s operating system.
2) Its provide better hardware compatibility, as its having Operating System to handle the hardware.
3) Here we do not have limit on hardware support.
4) Not very good performance as well as stability as compare to Bare-Metal.
5) Does not suits for the data centers becuase of low performance.
.
For each pair of substance identify the substance that is likely to ha.docx
CO2 will have the lower vapor pressure than XeF2 because CO2 has stronger intermolecular forces of attraction due to the double bonds between the carbon and oxygen atoms. CH3OH will have the lower vapor pressure than CH3-O-CH3 because CH3OH can form hydrogen bonds between molecules, whereas CH3-O-CH3 only has weaker dipole-dipole interactions. Vapor pressure tends to decrease as intermolecular forces increase.
For each of the requirements listed in the table below- 1- Please iden.docx
For each of the requirements listed in the table below,
1 . Please identify it as functional requirement or non-functional requirement.
2 . Please provide an explanation for every non-functional requirement that you identified.
Solution
Non-functional requirements describe how the system works , while functional requirements describe what the system should do .
Typical non-functional requirements are:
F:Functional
NF: Non-Functional
.
For Contingent Liability- When do you disclose it- When do you record.docx
For Contingent Liability:
When do you disclose it?
When do you record it?
When do you ignore it?
Solution
Contingent liabilites can be divided into three classifcations:
-Remote - There is a remote possibility that this will become a liability. A perfect example of this would be a frivolous lawsuit filed against your company with no sound legal reasoning. Those that are remote should be ignored.
-Possible - It is possible for this to become a liablity, but possibly not during this accounting cycle. Many companies list these possible liabilites in the footnotes of their year-end financial statements, but are not show on any of the actual statments as a liability. If it is possible, it should be disclosed.
-Probable - In this circumstance, the proposed liability is more than likely going to become a current or long-term liability. This may include an out-of court settlement where the company will be forced to pay a sum of money. Because it is probable, it should both be disclosed and recorded on the financial statements.
Hope this helps!
.
For each of the abstract data types (ADTs) that we have analyzed in th.docx
For each of the abstract data types (ADTs) that we have analyzed in this class we have implemented each of them in two different ways (Array-Based and Link-Based). Describe each of these implementations and discuss the differences between them.
Solution
Abstract data types can be implemented using array or linked list. but there are some major differences. linked list have some advantages over array. an array has some demerits. but a linked list overcomes all these demerits.
Difference between Array Linked list :
Array is a collection of homogeneous elements.it is a linear data structure. array have fixed size. once its size is declared, it cannot grow or shrink in size during execution. it has static memory of allocation. it stores data in contiguous memory locations. array is easily accessible. but it is difficult to perform insertion and deletion operations on an array.because during insertion or deletion each element after the specified element need to be moved one position right or left.
Linked list is another way of storing elements in memory.it is a collection of data items called nodes. each node is divided into two parts called data field and pointer field. data field contains the element and pointer field contains the address of the next node in the list. the pointer field of the last node contains null value.
it is a non-linear data structue. it doesn\'t require contiguous memory to store data in memory. it has dynamic memory of allocation. a linked list can grow or shrink in size during execution for its lifetime. the operations like insertion and deletion is easy to perform on linked list. because it stores data in non-contiguous memory location,so shifting of elements is not required.
**************** THANKS ********************** PLS GIVE GOOD FEEDBACK*********************************************
.
For each form of transport plot the value of overall benefits against.docx
For each form of transport plot the value of overall benefits against cost and hence identify the forms of transport that lie on the efficient frontier
Solution
Of course, no matter what form a tax takes, it is still a transfer payment-whether a direct tax on income or an indirect tax such as a sales tax, an excise tax, or a tariff or duty on an imported input for production. But some caution is advisable here. Taxes that are treated as a direct transfer payment are those representing a diversion of net benefit to the society. Quite often, however, government charges for goods supplied or services rendered may be called taxes. Water rates, for example, may be considered a tax by the farmer, but from the standpoint of the society as a whole they are a payment by the farmer to the irrigation authority in exchange for water supplied. Since building the irrigation system reduces national income, the farmer\'s payment for the water is part of the cost of producing the crop, the same as any other payment for a production input. Other payments called taxes may also be payments for goods and services rendered rather than transfers to the government. A stevedoring charge at the port is not a tax but a payment for services and so would not be treated as a duty would be. Whether a tax should be treated as a transfer payment or as a payment for goods and services depends on whether the payment is a compensation for goods and services needed to carry out the project or merely a transfer, to be used for general social purposes, of some part of the benefit from the project to the society as a whole.
.
Fluid Mechanics The water surface is at the position shown at t - 0 se.docx
Fluid Mechanics
The water surface is at the position shown at t = 0 seconds. What is the rate of rise or fall velocity of the water at t = 19 seconds? What is it at t = 21 seconds?
Solution
From the conservation of mass
rho*Ai*V1 = rho*A*dh/dt + rho*Ae*V2
A*dh/dt = Ai*V1 - Ae*V2
D^2*dh/dt = Di^2*V1 - De^2*V2
144*dh/dt = 144*1 - 36*2
dh/dt = 0.5
dh = 0.5*dt
Integrating
h-h0 = 0.5*t
Where ho is the initial height
Delta(h) = 0.5*t
When t = 19 sec
Rise in water level is
Delta(h) at t = 19 sec = 0.5*19 = 9.5 ft
When t = 21 sec
delta(h) = 10.5 ft
Since the 10.5 >10 it will go to bigger tank then the rise is height is different
delta(h) = 10 + h1
let us calcualate h1
Let\'s find in this way
Assume that the entire tube is of at 12 in diameter and find the volume for this 0.5 ft extra
and now replace the same volume of water with bigger diameter of pipe
A*0.5 = A2*h1
12^2*0.5 = 24^2*h1
h1 = 0.125 ft
Delta(h) = 10.125 ft
.
Fluctuation in inflation can occur in the short or long term- For exam.docx
Fluctuation in inflation can occur in the short or long term. For examle, rice levels can increase and decrease on a month to month aisis and we can also evaluate inflation rates over time. Therefore, while it may be hard to redict the economic change it can be tracked over different time periods. One way we can think about inflation is that because of a loss in purchasing ower, there is basically a lower payout to investors. Are there any investing strategies that can be taken in order to rotect against this risk?
Solution
Investing startegies that can be taken to protect against inflation risk:-
1) Investing smartly in all types of investements like shares, real estate and golds . It will reduce the risk of inflation.
2) Short term investement in stocks and booking the profit instead of long terms.
3) Bonds are the most sensitive in the inflation, we should be extra careful with that.
4) Investors should maintain the portfolio highly flexible and liquidable during inflation.
.
First National Bank charges 11-2 percent compounded monthly on its bus (1).docx
First National Bank charges 11.2 percent compounded monthly on its business loans. First United Bank Charges 11.4 Percent compounded semiannually. Calculate the EAR for each bank. For each of the following annuities, calculate the annual cash flow.
Solution
First National Bank, r = 11.2 %, m = 12
EAR =( 1+ 11.2%/12) 12 -1Â Â = 11.79%
First United Bank, r = 11.4%, m = 2
= (1 + 0.114/2) 2 - 1 = 0.1172 or 11.72%
.
More from michael1810 (18)
Judging from their relative positions in the Periodic Table- which ato.docx
Judging from their relative positions in the Periodic Table- which ato.docx
John Corporation has three investments that are classified as noncontr.docx
John Corporation has three investments that are classified as noncontr.docx
John Smith worked in the stockyard of a large building supply company-.docx
John Smith worked in the stockyard of a large building supply company-.docx
John has tremendous technical skills and frequently comes up with valu.docx
John has tremendous technical skills and frequently comes up with valu.docx
Joe Frecaso was recently hired as the controller for Larson Cement Com.docx
Joe Frecaso was recently hired as the controller for Larson Cement Com.docx
Java Write a method that takes as a parameter a one dimensional array.docx
Java Write a method that takes as a parameter a one dimensional array.docx
Java Programming- 1) Write a recursive method that finds and returns t.docx
Java Programming- 1) Write a recursive method that finds and returns t.docx
JAVA Q2- Write a program that reads strings from the user and writes t.docx
JAVA Q2- Write a program that reads strings from the user and writes t.docx
Java Language Which of the following statements is true- Select all th.docx
Java Language Which of the following statements is true- Select all th.docx
It-'s virtualization topic Would anyone please expalin what is the di.docx
It-'s virtualization topic Would anyone please expalin what is the di.docx
For each pair of substance identify the substance that is likely to ha.docx
For each pair of substance identify the substance that is likely to ha.docx
For each of the requirements listed in the table below- 1- Please iden.docx
For each of the requirements listed in the table below- 1- Please iden.docx
For Contingent Liability- When do you disclose it- When do you record.docx
For Contingent Liability- When do you disclose it- When do you record.docx
For each of the abstract data types (ADTs) that we have analyzed in th.docx
For each of the abstract data types (ADTs) that we have analyzed in th.docx
For each form of transport plot the value of overall benefits against.docx
For each form of transport plot the value of overall benefits against.docx
Fluid Mechanics The water surface is at the position shown at t - 0 se.docx
Fluid Mechanics The water surface is at the position shown at t - 0 se.docx
Fluctuation in inflation can occur in the short or long term- For exam.docx
Fluctuation in inflation can occur in the short or long term- For exam.docx
First National Bank charges 11-2 percent compounded monthly on its bus (1).docx
First National Bank charges 11-2 percent compounded monthly on its bus (1).docx
Recently uploaded
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Librarians are leading the way in creating future-ready citizens – now we need to update our spaces to match. In this session, attendees will get inspiration for transforming their library spaces. You’ll learn how to survey students and patrons, create a focus group, and use design thinking to brainstorm ideas for your space. We’ll discuss budget friendly ways to change your space as well as how to find funding. No matter where you’re at, you’ll find ideas for reimagining your space in this session.
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
Recently uploaded (20)
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
It is important that budgets be accepted by Question 16 options- supe.docx
- 1. It is important that budgets be accepted by Question 16 options: supervisors. all of these answers are correct. department heads. division managers. An overly optimistic sales budget may result in Question 17 options: increases in selling prices late in the year. increased sales during the year. insufficient inventories. excessive inventories. If the required direct materials purchases are 36,000 pounds, the direct materials required for production is three times the direct materials purchases, and the beginning direct materials are three and a half times the direct materials purchases, what are the desired ending direct materials in pounds? Question 18 options: 54,000 90,000 18,000 36,000 The single most important output in preparing financial budgets is the Question 19 options: budgeted income statement. determination of the unit cost of the product. sales forecast. cash budget. Which one of the following budgets would be prepared for a manufacturer but not for a merchandiser?
- 2. Question 20 options: Sales budget Budgeted income statement Cash budget Direct labor budget Solution Solution 16. All of these are correct. Solution 17. Insufficient inventories. Solution 18. Purchases = 36000 Consumption = 36000*3 = 108000 Opening stock = 36000*3.5 = 126000 Closing stock = Opening stock + Purchases - Consumption = 126000 + 36000 - 108000 = 54000 pounds Solution 19. Cash Budget. Solution 20. Direct labor budget.