1. PROJECT STUDY/PROJECT CAPSTONE REVISION MATRIX
ELECTRONICS ENGINEERING
TITLE: Design of an Iot Based Greenhouse Gardening System for Tomato
DEFENSE DATE:
ADVISER: Engr. Ronald Maaño
PANEL MEMBERS Engr. Dhon Niño
Canela
Engr. Erwin P.
Ellazar
Name of Student Student Number Contact Details Program
Mohammadjalud M.
Victor
BSECE
COMMENTS PREVIOUS
REVISION/S MADE/
ACTIONS TAKEN
PAGE
REFLECTED
Background Study
Enhancement
What are the reasons
why you came up for
this study?
Supported by focal points
that provide measures on
the continuing status of
schools that use the
standard participation
checking framework.
Page 9
Objective of the
Study
Is the design system a
modification?
Existing? Or new
design?
The General and Specific
Objectives have been
modified to make the
review explicit,
quantitative, practical,
important, and time
constrained.
Page 12
Scope and
Limitations of the
Study
Focus the discussion
on the designed
system capability,
capacity, limitation
and specification
once system or
device are installed.
The review's critical
extension has been
adjusted to focus solely
on the model's and web
application's capabilities.
Page 13
Conceptual
Framework
The drawing seems
like a workflow.
Convince me what
model is this.
Developed an IPO (Input
Process Output) Model to
clearly highlight what is
in store in the
examination in light of
the available factors
introduced.
Page 14
2. Data Gathering and
Analysis
In this part, you must
explain only the
methods and analysis
used in data
gathering.
The researcher will lead a
survey to determine the
status assuming that the
majority of respondents
agree that IoT is
recommended to work on
the nature of human
existence by robotizing a
portion of the vital tasks
that people must
complete. This survey
will determine whether or
not the examination will
proceed with its
beneficiaries.
Page 34
Design
In this part, you must
explain only the
methods used in the
conceptualization of
the design.
In this section, the
researcher demonstrates
the components of the
device and their
arrangement, whether
necessary or auxiliary.
Similarly, whether it is
prescriptive, procedural,
execution, or connecting
point, its separate
particulars must be
considered. The depiction
discovered in the part for
determinations is what
the capacities must
achieve in order to be
considered effective and
utilitarian. The specifics
are determined by the
apparent capacity of the
chosen implies, which
are mirrored and
exhibited in section two
of the survey of linked
writing.
Page 35 & 59
Fabrication
In this part, you must
explain only the
methods used in the
fabrication of the
prototype.
The model's
manufacturing interface
was specifically
determined by the
researcher.
Page 37
Testing and In this part, you must The technique is brought Page 38
3. Evaluation explain only how the
testing and evaluation
was done.
to a nearby location for
assessment and testing,
which is then corrected
on paper. This will
remember all result
records for requests to
validate that the project is
running smoothly. To
develop and carry out the
recommended study, the
researcher will conduct
three types of testing:
functionality, efficiency,
and effectiveness testing.
DesignConcept
You will justify
components and
elements of the
design.
Three Internet of Things-
based sensors will be
highlighted. A Light
Sensor, Temperature and
Humidity Sensor, and
Soil Moisture Sensor will
be remembered for the
model device in every
way. A single
microcontroller controls
the entire system
(observing and control
unit). This device will be
customized using data
from other framework
peripherals and parts.
Page 59
Data Gathering and
Analysis
You will execute,
present and analyze
the result of the data
gathering plan.
For their investigation,
the researcher gathered a
variety of important
information, facts, and
hypotheses. The
researcher conducted a
pre-survey and meetings
in order to delve deeper
into the difficulties that
organizations face.
Page 61
DesignConcept
You will execute,
present and analyze
the result of the
design plan.
Added in relation to the
paper, as well as
additional information
from various
examinations for
correlations of the
Page 62
4. existing and proposed
studies.
Prototype
Development
Present and show the
results for the
development of the
system.
Following the completion
of the information
conceptualization, the
scientist began
purchasing the parts
needed to build the
model. The researcher
began the creation cycle
by connecting the cables
that will connect the
sensors to the Arduino
and the Arduino to the
PC.
Page 70
Testing and
Evaluation
Present the testing
and evaluation result
on the paper.
The researcher altered the
data coming in from both
the web server unit and
the Arduino itself. The
results of the tests were
shown on a dashboard
that could be seen to
convey the findings, as
shown in the picture.
Page 74
Summary of
Findings
Should be a
Summary
of findings following
each section od unit
four… supported
with data results.
The researcher provided
a tabulated data on the
summary of findings that
is obtained within the test
results and the overall
performance of this
project.
Page 94
Conclusions
Should conclude the
research study
objects… with the
support of the
summary of findings.
It was stated in the
improved conclusion
aphorism the specific
data that resulted to what
this project is all about
Page 96
Recommendations
Recommend features,
technologies,
functions, to further
improve the
proposed system
In this part of the paper,
recommendations were
introduced by bulleted
format to distinguish
what are the things that is
needed for the project to
improve more.
Page 96
