Thermal Packer is a single-string, double-grip retrievable style packer designed especially for geothermal, steam flood or other severe temperature wells, holds pressure differentials securely from both above and below the packer.

2. Maximus Completion System is a Supplier & Manufacturer of
oilfield tools, we design, manufacture, outsource and supply to the
worldwide oil and gas industry with superior completion solutions
that our client trusts.
We build oil tools to international standards and follow API & ISO
guidelines in every process and document it for full traceability.
Maximus Completion Systems believes in utilizing the best of
techno-commercial dudes offering to you good prices along with
technical support i.e. designing your completion scenario, providing
the tubing movement data, completion schematics above all tubing
tally, if so required by the client.

3. • The Model: “Magnus Set” Thermal Packer is a single-string,
double-grip retrievable style packer designed especially for
geothermal, steam flood or other severe temperature wells,
holds pressure differentials securely from both above and
below the packer.
• Magnus Set Thermal Packer may be set using either tension or
compression force and, once set, may be left in either mode,
or in neutral, without any danger of the packer releasing
accidentally.
• Magnus Set Thermal Packer has closed style J-Slot, located on
the exterior of the packer body. This feature helps to prevent
the setting and releasing problems which are normally
associated with the severe operating conditions encountered
in steam flood and geothermal production wells.

4. 1. Temperature rating up to 400 Degree F.
2. 1/4 turn right-hand to set, 1/4 turn right-hand
release.
3. Emergency straight pull shear release, shear
rating 30,000 Lbs.
4. Component Metallurgy L-80 4140, 13Cr.
(Stainless Steel 420)

5. • The thermal packer is designed to be run and set using a hydraulic
setting tool engineered for producing high setting forces and handling
high axial loads.
• Surface setting pressures are adjustable by manipulating the initial
setup tool and set by drooping a ball or using a plug-in system, then
pressuring up on the workstring.
• Once the thermal element is packed off, the setting tool hydraulically
disconnects from the liner packer without string manipulation and is
retrieved to surface.
• The thermal liner hanger packer can be retrieved if required by using
standard retrieval equipment.

7. • Thermal applications
• Applications with top and bottom anchoring slips
that must be fully retrievable
• As a liner hanger, tailpipe hanger, or bridge plug
(with bullnose)
• Combined with the MH patch bottom as a casing
patch for remedial wellbore repair

8. 1. Thermal element rated to 650 degF [343 degC]
2. No workstring manipulation required to set packer
3. Standard tools/spears for retrieval
4. Liner or tailpipe placement control anchored during thermal cycling
5. Adjustable surface setting pressures
6. Well tractor transition from intermediate casing, through packer, and into
liner without a slave string
7. Large beveled re-entry sleeve
8. Large through-bore
9. Top and bottom anchoring slips
10. Metal-to-metal seal with static element
11. NACE MR0175 compliant for environments containing H2S

9. E-mail: sunir@maximuscompletions.com
Call: +91-96011 96395
Address: Maximus Completion Systems,
365, Manjusar G.I.D.C.,
Savli Taluka, Vadodara - 391745,
Gujarat State, INDIA.

10. Click here for
Thermal Set Packer