1. MARIMUTHU ALIAS MATHAVAN S
967, S.T.R.Nagar, K.T.C. Nagar, Tirunelveli
Contact No:-+91 9442569806
E-mail:-marimuthumathavan@gmail.com
CAREER OBJECTIVE
To have a growth oriented and challenging career, where I can contribute my knowledge and skills to the
organization and enhance my experience through continuous learning and teamwork.
BASIC ACADEMIC CREDENTIALS
Course Institute Board/University Year
Percentage/
Grade
B.E.(Mechanical)
University VOC College of
Engineering, Tuticorin
Anna University
Chennai
2011 – 2015 7.79/10
HSC
St. Xavier’s Hr. Sec.
School, Tirunelveli
State Board 2011 85.16
SSLC
St. Xavier’s Hr. Sec.
School, Tirunelveli
State Board 2009 91.8
ACADEMIC PROJECT PROFILE
v Major Project DURATION: (Jan-April 2015)
MECHANICAL BEHAVIOUR OF Al ALLOY REINFORCED WITH Al2O3 / RICE HUSK ASH
PARTICLES SYNTHESIZEDBY STIRCASTING
Aluminium Matrix Composites was fabricated by reinforcing alumina and rice husk ash particles to the
matrix of AA 6061 and its mechanical properties such as Hardness, Ultimate Tensile Strength and flexural
strength increases while its density decreases with the addition of reinforcements.
v Mini Project DURATION: (Jan- April 2013)
DESIGN & FABRICATION PROJECT ONBRIMMED DIFFUSER IN WIND TURBINE
In a conventional wind turbine prototype, a broad-ring flanged diffuser shroud is designed and fixed at the
exit periphery. The flanged diffuser generates a low-pressure region at the exit by vortex formation which
draws more air mass flow to the wind turbine inside the diffuser shroud, thereby increasing the efficiency of
the wind turbine.
INDUSTRIAL TRAINING
· TTPS, Tuticorin & NTECL, Chennai (Dec 2013& Dec 14)
Learnt the working of thermal power plant and the various components involved in the efficient
functioning of the plant. Observed the practical operation of storage unit, conveyor system, boiler
cooling tower, condenser unit, turbines, fans and electrostatic precipitators.
· Ciranjeevi Wind Energy Limited, Trichy (Dec 2014)
Learnt about the functioning of the gear box, yawing system and pitch control system in the nacelle.
Acquired an overview of the various surface cleaning methods and painting techniques used in non-
pressure parts.
· The India CementsLimited, Tirunelveli (Dec 2014)
Obtained a general idea about the processes involved in cement making. Observed the working of
crusher, vertical rolling mill, kiln, cement grinder and packer.
2. · Tamilnadu State Transport Corporation(TNSTC), Tirunelveli (Dec 2012)
Explored and learnt about the various parts of an automobile and its working. Observed the working and
fault rectification of various components of IC Engine, Differential, Gear Box& Clutch.
INDUSTRAIL VISIT
Ø BHEL, Trichy Ø Five Star Industries, Trichy Ø MYPOL, Mysore
SKILL SET
Technical Skills:
v Core Software: AUTOCAD, CREO, CATIA, ANSYS, SOLID EDGE
v Language:C++ , C
v Operating System : Windows
Soft Skills:
v Ability to work in a team v Inter personal skill v Good problem solving skill
ACADEMIC ACHIEVEMENTS AND CO-CURRICULAR ACTIVITIES
· Attended “International workshop on Stress asssisted Environmental Damage in Structural Materials” at
IIT, Madras.
· Completed training on “Skill Development Programme on Programming and Operation of CNC Lathe”
conducted by MSME Development Institute, Tuticorin.
· Attended Nissan “CVT and Modern Trends workshop” conducted by Department of Automobile
Engineering MIT Chennai at AUTOMEET’14
· Attended Workshop on “IC Engines Technologies” conducted by Experts Hub and Automobile Club of
IIT-Delhi at IJCE-Tuticorin on Aug 2013.
· Presented a paper on “Globel Warming” at the State Level Symposium EMPHYC’12 conducted by
Department of Science & Humanities at SCAD College of Engineering and Technology in April 12.
· Certified as “DME” by CCI Centre, Tirunelveli for completing courses on AUTOCAD, PRO E.
· Certified as “Foundation Course on Mechanical CAD- CATIA V6” by Penta CAD, Tirunelveli.
EXTRA CURRICULAR ACTIVITIES
Club activities:
· Member, National Service Scheme (NSS)
· Active Member, SAE Club
Position Responsibility:
· Member,Organizing Committee of RAA’2014 (Recent Advances in Automotive)
· Member, Organizing Committee of PEMETRIX’14 (National Level TechnicalSymposium )
PERSONAL DETAILS
v Father’s Name :- Shunmugam C
v Date of Birth :- 10 August 1993
v Languages Known :- English & Tamil
v Nationality :- Indian
v Interest & Hobbies :- Reading books, Net surfing and Playing games
DECLARATION
I do hereby declare that the above information is true to the best of my knowledge.
Place: Chennai MARIMUTHU ALIAS MATHAVANS