AirTunes 2 Protocol Contents - Introduction - Credits - Streaming audio to an AirTunes 2 compatible server Connect Transmitting Audio Suspending Audio Transmission - Resuming Audio Transmission Disconnect - Preferred TCP/UDP ports - Payload types - Data types RtpHeader - NTP Timestamp - RTP Timestamp - SyncPacket ResendPacket - Constants - RTSP - Frame 3: 60 bytes on wire (480 bits), 60 bytes captured (480 bits) on interface enp@s3, id 0 Common request headers Request URI - Internet Protocol Version 4, Src: 34.117 .237 .239 , Dst: 10.0 .2 .15 - Transmission Control Protocol, Src Port: 443, Dst Port: 44762, Seq: 1, Ack: 40, Len: 0 - FLUSH - OPTIONS SET_PARAMETER - Setting volume - Set progress - Set DAAP metadata - SETUP TEARDOWN - Rogue Amoeba extensions - X RA SET ALBUM ART - Authentication - Detect speaker type - Detect metadata and audio latency. - Timing Replying to timing packet Answer the following questions: 1. What is the protocol you selected and what is it used for? 2. What protocols are used at each layer in the protocol stack for your selected protocol? 3. Was there any other traffic contained in the capture? 4. What addresses were used for the two communicating parties? Examples include Ethernet addresses and IP addresses. If you selected a sample with more than two, you can select any two parties..