Living Area has over 20 years of real estate knowledge servicing buyers and sellers in the Mumbai-Pune location.

1. http://www.livingarea.in

2. Step by step instructions to Calculate a Home's
Square Footage:
Ascertaining the square footage of a house is not troublesome,
but rather it includes some legwork, record keeping and math.
Knowing how substantial a house is aides in evaluating the
amount it will cost to warmth or cool it, and it is a key bit of data
when contemplating offering or leasing the home. Insurance
agencies will likewise need to know how substantial the house is.
http://www.livingarea.in

3. http://www.livingarea.in
Single-Story Homes :
1.Draw a photo of the home's diagram on a sheet of paper.
Single-family homes are less demanding to quantify outside.
Simply the length and width of the home need to be measured.

4. http://www.livingarea.in
2.Place the tab of the measuring tape on one side of the home and
force it until you achieve the inverse side. This errand is simpler
with two individuals, one to hold the tab set up and the other to
quantify the length of the divider. On the off chance that your
measuring tape isn't sufficiently long to achieve the other side,
make a little stamp with the pencil on the divider and record the
estimation up to that point on the paper drawing of the home's
format.

5. http://www.livingarea.in
3.Repeat these ventures until the length and width of the home have been
noted. Include the feet of the two divider compasses independently, and
round any parts up to the following inch. Change over the estimation to feet
for both dividers. Increase the length by the width, and the item will show
what number of square feet are in the home.

6. http://www.livingarea.in
Two-Story Homes:
1.Measure the first floor pretty much with respect to a solitary story home. In the
event that the second floor is the same size as the first floor, then simply twofold the
square footage to locate the square footage of the whole home.
2.Measure the square footage of the second floor from inside by measuring the
length and width of the upstairs.

7. 3.Add 4 inches to the finishes of every divider as you measure it to adjust for the
width of every outside divider. Include the length for every compass up and
absolute them up to locate the real length and width. At that point duplicate the
aggregates to locate the square footage of the upstairs. Add it to the square
footage for the first floor to locate the aggregate square footage of the home.
http://www.livingarea.in

8. Contact:
Our Head Office
Pune,
Contact Numbers:
+91-8308827216
+91-9869474646
Our Branch Office.
B102, Surbacon Maple,
MainChikkanayankanhalli
Road.
Off Sarjapur Road
Bangalore-560035
Contact Number:
+91-9845192503
http://www.livingarea.in

9. http://www.livingarea.in

10. http://www.livingarea.in