1. VIGNESH KUMAR. K
No:18,Bharathinagar,Belur
Salem–636104.
Mail id: kvignesh.ka@gmail.com
Mobile:+91-9600143739
CAREER OBJECTIVE
To acquire a challenging position and to contribute my skills, in promote the ideas and techniques to
establish accident free safe working environment in an organization.
ACADEMIC BACKGROUND
Company: Team Construction Company
Project: Bosch, Chennai
Duration: 1 year
Designation: Safety Trainee
Description: Worked for TCC was a very pertinent and assiduous task. Daily work chore started off by jotting the
worker entry details. The other routines included conducting induction meeting to the employees
and discussing about the tasks to be carried out, monitoring all the machineries, instruments and
tools for the working condition and operating correctness in accord with the checklist. Surveillance
of the work area to check whether all the precautionary safety measures are being followed or not.
Conducting and coordinating mock drills to overcome the emergency mishaps in the work area every
6 months.
Year
Qualification – Degree
/Course
Board/University College/ Institute/ University
Percentage /
CGPA
2015
M.E. Industrial Safety
Engineering
Anna University,
Chennai.
Knowledge Institute of
Technology, Salem.
7.7
2013
B.E. Electronics And
Communication
Engineering
Anna University,
Chennai.
Magna College Of Engineering,
Chennai.
6.3
2009
Diploma in Electronics
And Communication
Engineering
DOTE
Vel tech Polytechnic college,
Chennai.
90
2007 H.Sc State board A.E.T.Hr.Sec.School, Attur. 66
2005 S.S.L.C Matriculation
Sri Thiagarajar Memo.
Matric. School,Belur
74
WORK EXPERIENCE

2. Company: ELGI Equipments Ltd
Project: Hazard Identification and Risk Assessment in foundry
Duration: 3 months
Aim: To determine the various possible hazard occurrences in the industrial area and check whether
those fall under the permissible OSHA guidelines if not to provide the required corrective measures.
Description: Basically this project was oriented in abating the menace incidents from happening, based on the
garnered history of hazard occurrence in the industry along with calculating the probability of future
mishaps. The complete industrial demesne was surveyed after understanding about the accidents
and further essential information and suggestions were composed from the employees to have wider
lucency. With these data the perchance risks were presaged and the required suggestions for
refinement of the industrial grounds were compiled into a report and submitted for further
enhancements.
Project: Dust Control and Indoor Air Quality Management in an Educational Institution
Duration: 1 month
Aim: To increase the air quality by reducing the dust content in the campus environment.
Description: The main objective of the project was to improve the quality of atmosphere around the college
campus. To achieve this, the dust in the atmosphere was measured using a high volume sampler over
a period of time, by placing the HV sampler in various places inside the campus. Based on the
measurements observed it was clear that the air pollution in the campus was more than the
permissible values. Following which the necessary remedy methods were suggested and the
management implemented the necessary changes in and around the campus in order to control the
dust thus improving the air quality on the premises.
 Course completed: Diploma in Industrial safety from Annamalai University in 2013.
 Successfully completed ISO 14001 OHSAS 18001 internal auditor course.
 Successfully completed First Aid from St. John Ambulance in 2014
AREAS OF INTEREST
 Safety in Construction
 Principle of Safety Management
KEY SKILLS AND COMPETENCIES
 Have experience in developing and implementing cross-functional best practices.
 Have established and implemented company's hazard abatement and occupational health and safety
programs.
 Good at preparing required permits and compliance reports and also conducting investigations and
reports on accidents with making required recommendations on safety improvements.
 Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions
or approaches to problems and understanding the implications of new information for problem-solving
and decision-making.
PROJECTS UNDERTAKEN
CERTIFICATIONS

3. CONFERENCES ATTENDED
 Participated in National Conference on ‘Advancement in Mechanical, Environment, Safety and Health
Engineering’ in Knowledge Institute of Technology.
WORKSHOPS ATTENDED
 Attended one day workshop on ‘Golden Hour Care and Emergency Response Management’ in
Knowledge Institute of Technology.
 Attended one day workshop on basic knowledge about HIRA and AIA conducted in ELGI.
ACADEMIC/EXTRA-CURRICULAR ACTIVITIES
Academic Accolades:
 Published paper in International Journal of Research in Engineering and Technology about ‘Study
on Road safety Improvement in India’.
 Presented paper on ‘Study on road safety improvement’ in the national conference AMESHE-2014.
 Presented a paper on ‘Network security’ in the national conference TRENZINE’11.
 Presented paper on ‘Evaluation of Safety and Health Hazards in Foundries Using HIRA’ in the
International Conference ICADM14 at National Institute of Technology.
Extra-Curricular Accolades:
 Active member in Safety Engineers Association, Chennai.
 Acted as Vice President of Electronics and Communication Department club.
 Organized and conducted awareness program about safety to college students.
 Gave training to employees of the industries visited on fire fighting.
COMPUTER SKILLS
Operating Systems: Windows server 2003/2008 and Windows 7/8.
Platforms: Networking
Others: MS Office
PERSONAL DETAILS
Date of Birth: 25-04-1990
Father’s Name: Karunakaran.G
Nationality: Indian
Permanent Address: No: 18
Bharathi Nagar,
Valapady Taluk
Salem -636104
Contact Details: Primary:
Secondary:
+91-9600143739
+91-9940810418
Passport Number: J9468947
Valid from: 19/Nov/2012 Valid Till: 18/Nov/2022
Relocation Preferences: Anywhere in India and overseas
I hereby declare that the above mentioned details are correct and true to my knowledge.
VIGNESH KUMAR. K