Check out the breathtaking collection of Earbuds, Headphones, Earphones & Wireless Speakers with contemporary designs and utmost features from India’s No.1 Earwear Audio Brand.

1. Potential Problem Solution
If one earbud is notworking Perform the FactoryReset
If earbuds are not inconnection/
scan mode
Perform the FactoryReset
If earbuds disconnect during phone
call
Charge the earbuds or performthe
FactoryReset
If there are other exceptionsin
usage
Place the earbuds back into the
charging case and try usingthem
gain or perform the FactoryReset
BluetoothVersion V5.0
WaterResistance IPX6
Music Playtime Up to 4Hours
StandbyTime 70Hours
Transmission Range 10m
DriverSize 6mm
BluetoothProfile HFP/HSP/ A2DP/AVRCP
Frequency 20Hz-20kHz
Battery Earbuds 35mAhx2
Battery Charging Case 500mAh
ChargingTime 1.5Hours
Product Weight 48.5g
Advisable:Theearbuds startata100%volume anditmay need tobereduced
when the earbuds areswitched on atfirst.This can be done by using the
volume controlonthephone/mediadevice.
Voice Assistant
Step1:Longtouchthecapacitivetouchcontroloneither
earbud for2secondstoactivatevoiceassistant
Step2:Therespectivevoiceassistantscreenpopsup and
youmayplaceyourcommandsatease
Tips:Youmaytrythefollowing commands,
• Whatistheweather?
• Playasong
• WhereareThePyramidslocated?
Smart Power Off
Step1:Afterusage,removeboththeearbuds fromyourears
Step2:Placetheearbuds backinto thechargingcaseincorrect
orientation
Step3:Theearbuds willautomaticallyswitchoff(andenterinto
chargingmode)
Manual PowerOff
Step1:Long touch the CTCon either earbud for5 seconds until the
green indicatorLEDblinks beforeearbuds getting turnedoff,inorder
to manually switch offthe earbuds.Pleasenote thatthis powers off
both theearbuds
Step2:Pleasekeeptheearbuds backinto thechargingcasetocharge
theearbuds
Troubleshooting
Specifications
Charging TheEarbuds
Step1:Pleaseinserttheearbuds backinside thechargingcasein
correctorientation.
Step2:A greenLEDwillindicatethattheearbuds arebeing
charged.Oncefullycharged theLEDturnsinto blue
Step3:Once theearbuds arefullycharged,thechargingcase
automaticallyswitchesofftosavepower.
Note:
•Beforeusingtheear-budsforthefirsttime,itisrecommended to
fullycharge the ear-buds.Also,pleasekeep the lid of the charging
caseclosed whilechargingandusea5V/2Aadaptor
• Whentheearbuds areinlowpower,flashing green LEDindicates
thesame
3 2x Pairsof EarCaps
In the box
1 1x pairofEar-Buds
4 1x ChargingCable
2 1x ChargingCase
5 User Manual
Getready toimmerseyourself inmusical
bliss with your very own pair of boAt
Airdopes441.Pleaseconsiderthismanual
asyourguiding maptowardsthe shores of
musicalbliss.KnowledgeofBluetoothand
device connectivity isessentialforsteering
this boat and therefore we strongly
recommend thorough reading of this
manual;also,youmay refertothe same at
times when you faceany sortofdiflculty
infuture.
441
KeepsYou
Groovin’
441
441
KeepsYou
Groovin’
LED Indicators/Functionalities
Product Overview
Earphone
1: Ear-flag
2:Charging Contacts
3:Ear-cap
4:Touch sensing area
(functionkey,lightswhen
thetouchisactive)
5:Indicatorlight
6:Microphone
ChargingBox
1: Chargingboxlid
2: Chargingthimble
3:Batteryindicator
4:Type-C chargingport
SetupGuide
Manual 3Seconds
2Seconds
5Seconds
TripleTap
Warning
• Pleasefollowtheinstructionstooperate
• Pleasechargetheear-budsaccording tothechargingnorms
mentioned onthepackaging&manual
• Pleasedon’tusetheear-budsinextremetemperatures
• Pleasedon’tusetheproductnearwater
• Pleasekeeptheproductawayfromheatsources,asthe
heatmaydamageit
• Don’tjamtheportssuchaschargerport,LEDport,etc.
• Itis recommended to utilize the product below the
maximum volume inordertoprotecthearing andextend
theear-buds’servicelife.
Step1:Pleasenote thatboth the earbuds can be used in mono
mode.Useeitherofthetwooptions;SmartPowerOnorManual
PowerOnforswitching onthedesiredearbud
Step2:Theselectedearbudwillautomaticallyentertheconnection
modeindicatedby alternatinggreenandblueLEDflashes
Step3:TurnonBluetoothonyourphone/mediadeviceandsearch
for‘boAtAirdopes 441’toconnect
Notes:
•To switch to Stereo mode, simply take out the other earbud from
the case. It will automatically power on and pair with the previously
selectedearbud,henceenabling Stereousage.
• Youcannotskip tracksorreturntotheprevious tracksinMono
mode.
Single EarbudUsagePower On (First Time User)
Step 1:To automatically switch the earbuds on (Smart
Power On) simply take them out from the charging case
OR
To manually switch the earbuds on (Manual Power On),
long touch the Capacitive Touch Control (*CTC) for 3
secondson both Left and Rightearbudsuntilthe LED light
begins to flash in blue
Step2:Boththe earbudswill automatically pair with each
other.The earbudswillenterinto the ConnectionMode,
indicated by alternate greenand blueLED flashes
ConnectionMode
Step3:Turn on the Bluetooth functionalityon your
phone/media device and scan
Step4:Search for‘boAt Airdopes441’ and pair accordingly.
Enter‘0000’ as the passkey ifasked.
•Pairing mode lasts for5 minutes.Ifthe pairing time is
missed then you willneedto reconnect the ear-buds and
followthe above mentionedprocedure
•Airdopes 441 remembers previously connected devices;
once switched on, the ear-buds automatically reconnect to
the previously connected devices
Congratulations! Your earbuds arenow connected
successfully viaBluetooth
Power On (Subsequent Usage)
The next time you when you open the lid of the case, our
IWP (Insta Wake N’Pair) Technologyenables the earbudsto
power on automatically and get connected to the
previously paireddevice.
Notes:
Charge TheCase
Step1:Tocharge thecase,plugoneendoftheType-Ccableintothecase
andconnecttheotherendtoacomputerorawalladapter.
Step2:Theindicatorin the caseblinks with blue light forrepresenting
75%-100% power; itblinks with purple light for35%-75% power while it
blinks withredlightforrepresenting0%-35% power.Whenthecasegets
fullycharged,thebluelightstayssolid
Note:TheLEDlights locatedonthechargingcaseindicatethebattery
statusofthecase.
“Whatistheweather?”
“Playasong”
“WhereareThePyramids located?”
Step4:Once youtaketheearbuds outfromthechargingcase,they
automaticallyrestart
Congratulations!YourAirdopes441hasbeenReset
Step1:Placeboththeearbuds backinto thechargingcaseincorrect
orientationtoswitchthemoff
Step2:Triple tap the capacitivetouch control on both earbuds to
performtheFactoryReset.Oncedone,itgetsindicatedbyalternate
redandblueLEDflashes
Step3:Shutthelidofthechargingcaseandthenre-openitagain
Factory Reset
PerformtheFactoryResetincaseyoufaceanydiflcultywhile
operating yourAirdopes 441
Bluetooth
BoAt Airdopes 441
Long touchtheCapacitiveTouchControl
(*CTC)on eitherearbudfor2 seconds
vtoactivatethevoiceassistant /Reject
incomingcalls
ManualPowerON:Long touch theCTCfor3 seconds
on both Left and Right earbuds for switching them
on until theLEDlightbeginstoflash in blue
ManualPowerOFF:Long touchtheCTCon either
earbudfor5 seconds untilthegreen indicatorLED
blinksbeforeearbudsgettingturnedoff
FactoryReset:TripletaptheCTC on bothearbudstodo
Factory reset,which is indicated by the blinking of
greenandblueLedlights
Basic Functions
•VoiceAssistant: Long touchthecapacitive touch
control on either earbud for 2 seconds to activate
voiceassistant
•Answer/Hang Up Call:Single tap the capacitive
touch control on either earbud to answer an
incoming calland onceagaintohang up an ongoing
call
•Reject Call:Long touch the capacitive touch
controlon either earbud for 2 secondsinorder to
rejectan incoming call
•Play/PauseMusic:Singletapthecapacitive touch
controlon either earbud toplayasong or topause
one
•NextTrack:When playingmusic,doubletapthe
right earbud’s capacitive touch control in order to
skip tothenextsong on theplaylist
•Previous Track:When playing music, double tap
theleftearbud’s capacitive touchcontrolin order to
return totheprevious song theplaylist
Note:Volumecannotbecontrolledviaearbudsand
canonlybeadjustedviaphone/media device Chargingnorms &PrecautionaryGuidelines:
1)Charger/Brick/Adapter
1)Cable/Wire
:5V/2A
:StandardCable(35Strands
@0.10mmdiameter/strand)
Any other accessory can be paired up with the product as long as the
specifications are as per above norms.
Advisable: Theearbudsstartata100% volume
and it may need to be reduced when the
earbudsareswitchon atfirst.Thiscanbedone
by using the volume control on the phone/
mediadevice.
Common Problems with Solutions
Ifonlyoneearbudisfunctioning:Simply
inserttheearbuds backintothecaseand
takethem out or perform the Factory
Reset
Ifearbuds are not in scan mode (No
alternating green and blue LED flashes
on the earbuds): Simply insertthe
earbuds backintothecaseandtakethem
outorperformtheFactoryReset
Ifonlyone earbudisfunctioning:
If earbuds are not in scan mode (No alternat-
ing green and blue LED flashes on the earbuds