1. OBJECTIVE:
To obtain a challenging position, best fit my qualification, utilizing my
abilities, developed through my experience and education with the opportunity for
professional growth and career improvement, based on performance. To seek an
excellence in profession, growth in career and associate with an organization offering
a responsible position.
EXPERIENCE:
Position: Electrician (service)
Company: Mohamed Abdulrahman Al-Bahar LLC
P.O Box 6038, Sharjah- U.A.E.
Tel: +971-6-5433555
Fax: +971-6-5432555
Website:www.albahar.com
Date: October 06,2012 to present
Duties and Responsibilities:
• To be perform high standard procedure in conditioning
Caterpillars machine, marine engine and genset.
• To give high satisfaction of the customers.
• To be always ensuring maintenance, adjustments and repairs
carried out at regular intervals using genuine parts.
• Visually inspect the entire machine, marine engine and genset
before start to repair operation.
• Performing preventive maintenance of all caterpillar machines
marine engine and genset.
• Diagnostic cat machine using by cat ET (electronic technician).
• Getting specifics using SIS (service information system).
• Trouble shooting using proper CAT trouble shooting procedure.
• Rectify and repairing CAT machine, marine engine and genset
on SIS procedure.
• Turn over to owner with machine, marine engine and genset
satisfactory condition.
Page 1 of 6 CV – Joseph Cacpal
Joseph Cacpal
+971553069071
+971557434857
CURRICULUM VITAE
Joseph_cacpal11@yahoo.com
2. • Genset load testing 0% to 110%
• Simulation test
• Megger test
• Power up and start up marine engine and genset
• Trouble shooting
Position: Electrician (seaman)
Company: FAL SHIPPING CO. LTD.
P.O. BOX 6600, SHARJAH U.A.E.
TEL: (+9716)52286666, 5283334
FAX: (+9716)5281437, 5280861
Date: July 29, 2010 to February 09, 2011
Duties and Responsibilities:
• Synchronizing power to Generator 1 to Generator 2 (245 kw)
• To run the emergency Generator for conditioning (150 kw)
• To connect the shore power supply (200 kw)
• To maintain all motor pump such as bilge pump 30 kw, fire pump 30
kw, general service pump 30 kw, em. Bilge pump 7.5 kw, em. Fire
pump 7.5 kw, stabilizer motor pump 22 kw, bow thruster motor
pump 140 kw, anchor winch motor pump, air conditioning seawater
and fresh water motor pump 40 kw, ice maker seawater and fresh
water motor pump, chiller motor pump, supply fan motor 6 kw,
exhaust motor 1.1 kw, oily water separator motor pump 2.2 kw, fuel
oil separator motor pump 2.2 kw, fuel transfer motor pump 3 kw,
dirty oil motor pump 2.2 kw, black water motor pump 3.5 kw, grey
water motor pump 3.5 kw, hydrophore motor pump 2.2 kw, air
compressor motor pump, seawage treatment plant motor pump,
water maker 7.5 kw, steering pump 2.2 kw, tender crane motor
pump 5 kw,
• To maintain all panels such as main switch board, motor control, em.
Switch board, domestic services, engine panels, battery and battery
chargers, navigational, fire alarm, tank gauges, service camera,
electric curtain, general alarm, 24 volt panel, console, gmdss.
Position: Site Electrician Supervisor
Company: RAJKOT DIESEL MACHINE TR. EST.
P.O.BOX30741, SHARJAH – U. A. E
Page 2 of 6 CV – Joseph Cacpal
3. Dates: September 27, 2008 to July 28, 2010
Duties and Responsibilities:
• Giving instructions to manpower before start a work
• Leading manpower to their specific work
• Dealing with people, owners, managers, customer, supervisors,
foramens, laborer
• Safety first
• Job schedule
• Preparation of tools and materials
• Job supervising
• Knowledge of cables capability and capacity
• Knowledge of load computation
• Inspection and commissioning all electrical equipment
• Knowledge in AutoCAD 2D
• Trouble shooting
Position : Ship Electrician
Company: GRANDWELD (Branch of ATOS International)
P.O. Box 24755, Dubai, U.A.E.
Dates: 17 June 2007 – 25 September 2008
Duties and responsibilities:
• Generator installation & termination
• Termination of control panel board, DB, MSB, GSP, ACDB, DCDB, ESRP,
ELRP, Fire Detection
• Terminating thru terminal block to unit, wheel house console, aft
console, voltage converter thru its own amperage, voltage relay,
battery charger
• Construct instrument panels, using hand tools, rulers, dividers, and
power drills, following specifications.
• Performs other jobs as requested like operating the overhead crane,
vertical/horizontal saw, grinder, Aluminum cutter & other machines.
Position : Technician/Electrician
Company: Clear view, (Bin Habib Group of Companies)
Dates: 10 Oct 2006 –24 May 2007
Duties and responsibilities:
• Reading blueprints
Page 3 of 6 CV – Joseph Cacpal
4. • Installing electrical components to architectural and code specifications
• Running wires through conduit
• Testing wiring connections with test equipment like volt/ohmmeters
and oscilloscopes
• Test or repair electrical based equipment
• Work closely with engineers, general contractors or architects
• Checks and replaces faulty switches, sockets, and other simple
elements of electrical systems such as lighting fixtures, tube, and
ballasts.
• Connects wiring to fixtures and power equipment; splices wires as
required.
• Inspects and tests electrical lighting, signal, communication, and power
circuits.
• Isolates defects in wiring, switches, motors, and other electrical
equipment.
• Measures, cuts, threads, and installs electrical conduit.
• Pulls wiring through conduit.
TRAINING AND CERTIFICATION:
Refrigeration and air-conditioning mechanic
Lorraine Technical School
1990-1991
Certificate of Proficiency
Century Trade Test Center
Building Wiring Electrician
TESDA (Technical Education and Skill Development Authority
Practical Electricity
Certificate of Completion
Department of Social Welfare and Development
AutoCAD Course ( Release 2006 & 2D )
Certificate of Completion
Computer Aided Design & Drafting Group
Philippine Consulate General
Dubai, United Arab Emirates
BASIC SAFETY TRAINING
(Regulation VI/1 of the 1978 SCTW Convention, as amended)
Personal survival techniques
(IMO Model Course 1.19)
Fire Prevention and Fire Fighting
(IMO Model Course 1.20)
Elementary First Aid
(IMO Model Course 1.13)
Personal Safety and Social Responsibility
(IMO Model Course 1.21)
Certificate of Completion
Southern Institute of Maritime Studies
Page 4 of 6 CV – Joseph Cacpal
5. March 23-27 and 29–31,2011
SHIP SECURITY AWARENESS
Certificate of completion
Southern Institute of Maritime Studies
March 11, 2011
MARPOL 73/78 ANNEX I
(IMO MODEL COURSE 1.11)
Certification of completion
Southern Institute of maritime Studies
March 07-10, 2011
MARPOL 73/78 ANNEX II
(IMO MODEL COURSE 1.12)
Certification of completion
Southern Institute of maritime Studies
March 07-10, 2011
ISM FAMILIARIZATION FOR RATINGS AND SAFETY
MANAGEMENT SYSTEM AWARENESS
Certification of completion
Southern Institute of maritime Studies
March 26, 2011
RATINGS FORMING PART OF ENGENEERING WATCH
(MTC Course Programme no. 97-0013)
Certification of completion
Southern Institute of maritime Studies
March 15-18, 2011
PROFICIENCYIN SURVIVAL CRAFT AND RESCUE
BOATS (OTHER THAN FAST RESCUE BOATS) (31.5 HRS)
(IMO Course 1.23)
Certification of completion
Southern Institute of maritime Studies
March 21-24, 2011
CERTIFICATE ISSUED UNDER THE PROVISSIONS OF
THE INTERNATIONAL CONVENTION ON STANDARDS OF
TRAINING, CERTIFICATION AND WATCHKEEPING FOR
SEAFARERS, 1978, AS AMENDED
TESDA (Technical Education and Skills Development Authority
March 30, 2011 to March 30, 2016
HANDLING VALID UAE DRIVING LISCENCE…
Page 5 of 6 CV – Joseph Cacpal