Buy the Takex PB-200EX at JMAC Supply. https://www.jmac.com/Takex_PB_200EX_p/takex-pb200ex.htm?=slideshare

1. L imited Warranty :
T AK E X products are warranted to be free from defects in material and workmanship for 12 months from original date of shipment. Our warranty does not cover damageor
failure caused by Acts of God (including inductive surge by lightning), abuse, misuse, abnormal usage, faulty installation, improper maintenance or any repairs other than
those provided by T AK E X. All implied warranties with respect to T AK E X, including implied warranties for merchantability and implied warranties for fitness, are limited in
duration to 12 months from original date of shipment. During the Warranty Period, T AK E X will repair or replace, at its sole option, free of charge, any defective parts
returned prepaid. Please provide the model number of the products, original date of shipment and nature of difficulty being experienced. There will be charges rendered for
product repairs made after our Warranty period has expired.
In Japan
Takex America Inc.
Unit 16/35 Garden R oad, Clayton,
3168 Victoria, Australia
Tel : 03-9546-0533
Fax : 03-9547-9450
Takex America Inc.
Brisbane office : 1/50 Logan
R oad, Woolloongabba
Queensland 4102, Australia
Tel : 07-3891-3344
Fax : 07-3891-3355
Takenaka E ngineering Co., Ltd.
83-1, Gojo-sotokan, Higashino,
Yamashina-ku, Kyoto 607-8156, Japan
Tel : 81-75-501-6651
Fax : 81-75-593-3816
http : // www. takex-eng. co. jp
Takex America Inc.
3350 Montgomery Drive , S anta
Clara, CA 95054, U.S .A.
Tel : 408-747-0100
Fax : 408-734-1100
http : // www. takex. com
Takex E urope Ltd.
Takex House, Aviary Court, Wade R oad,
Basingstoke, Hampshire. R G24 8PE , U.K.
Tel : (+44) 01256-475555
Fax : (+44) 01256-466268
http : // www. takexeurope. com
In the U.S . In the U.K.In Australia
PB-100EX : 330ft (100m)
PB-200EX : 660ft (200m)
PB-400EX : 1320ft (400m)
T hank you for purchasing this product.
R ead this instruction manual before using the product to make sure that you use it correctly.
EXPLOSION-PROOF
PHOTOELECTRIC BEAM SENSOR
Instruction Manual
4
6
N o.04-186 1110
E XTE R NAL DIME NS IONS
Unit : mm
7
T he T AK E X E xplosion-proof Sensor consists of a transmitter which emits the infrared pulsed beam and a receiver which
receives the beam. T he units are manufactured in accordance with T echnical R ecommendations by Ministry of L abour,
T he R eserch I nstitute of I ndustrial Safety J apan. Please read this manual carefully for correct and effective use.
INS TALLATION
1
T o be constructed in accordance with the rule for explosion-proof apparatus. Please refer I tem 2) .
T o protect around a building as illustrated adove,
install the transmitters and the recievers so as to
cross infrared pulse beames at each corner.
Gravel
Concrete F oundation
Welding
Steel Pipe
Mount both transmitter and receiver on their respective tables which are fixed at 80cm to 100cm from the ground.
PB-100EX
PB-200EX
PB-400EX
T he L E Ds in the windows on the back of transmitter and receiver
will light when power is supplied. T hen the units are in the protected
condition the receiver L E D goes out, when the beam is interrupted,
the receiver L E D lights.
OPE R ATION
5
Hole for Conduit (PF-lT/1)
Hole for Conduit (PF-lT/1)
Hole for Conduit (PF-lT/1)
1
4-M12
4-M12
4-M12
Hole for M16 Bolt
Hole for M16 Bolt
Hole for M16 Bolt
T R .
R E .
T R .
T R . T R .
T R .R E .
R E .
R E .
R E .
B uilding
Window
T ransmitter R eciever
T ransmitter L E D R eciever L E D
T ransmitter & R eceiver
H ole for Conduit
(PF -lT /1)
F ixed Mounting T able
(N ot included)
J unction (Wiring) B ox
(N ot included)Steel Pipe
(N ot included)
Concrete F oundation
Conduit Pipe
(N ot included)
TE S T
4
Sensitivity test sheet (include)
Apply the sheet on the
reciever lens. Sensitivity
is good when reciever
L E D does not light up.
(Details show on the
sheet)
Make sure
that the
L E D(green).
lights up
with power
ON .
With power ON ,
the reciever
will receive an
infrared pulesed
beam and then
the L E D(red)
will light off, if
the alignment is
correct.
S PE CIFICATIONS
Model
Max.Arrival distance
S upply voltage
Alarm signal
R esponse time
800m(2640ft)
100m(330ft)
or less
( ×8 )
50 to 100msec
R elay output S .P.S .T(N/C)
R eset time : Approx 1sec.
Contact rating : 100V ･ 0.5A ･ Max 10VA
AC 100V 50/60Hz
Power consumption
Transmitter : 2.5VA
R eceiver : 3VA
PB-100E X
Infrared rays
Pulsed beam by infrared LE D
Wave length :9400Å
Double modulated frequency 500Hz to 20KHz
PB-200E X PB-400E X
Protection distance
200m(660ft)
or less
400m(1320ft)
or less
1600m(5280ft) 3200m(10560ft)
Ambient temperature range -35℃ to +60℃(-30F to +140F)
C lass I & Ⅱ hazardous location
Transmitter : 10kg Transmitter : 12kg
R eceiver : 10kg R eceiver : 12kg
E poxy resin baked coating stainless steel plate
Mounting position
Weight
Appearance
T ransmitter
R eciever

2. WIR ING
2
2-l Wire Materials
I . E .
a) 600V grade polyvinyl chloride insulated wires (I V ) ・・・J I S C 3307
b) 600V grade heat-resistant polyvinyl chloride insulated wires(H I V ) ・・・J I S C 3317
c) 600V grade aluminum conductor polyvinyl :chloride insulated wires(AI -I V ) ・・・J I S C 3372
d) 600V grade natural rubber insulated wires(SB R ) ・・・J I S C 3304
e) 600V grade silicon 'rubber insulated glass fiber braided wires (K GB ) ・・・J I S C 3323
f) 600V grade polyethylene insulated wires (I E ) ・・・J I S C 3326
g) Other wires similar in position to the above.
(2) Conduit
(3) Accessories for conduit (I ron and steel pipe fittings)
(1) Screw threads
(1) U se insulated wires enclosed is rubber, vinyl, polyethylene or fluoro-carbon resin.
2- 2 Conduit Arrangement
(2) F lexible fittings (couplings)
(3) Sealing
a) On one side of the conduit which passes through the wall between a class I hazardous location and the other except
on the conduit between the sealing fittings and wall.
2-3 Drip-pcoof
When it is apparent that water may collect in conduit, boxes and sealing fittings, prevent water from' staying in by
providing drainage.
2-4 Wiring
(1) Detach the the back cover of transmitter and receiver with the hexagon wrench provided.
-E xample -
(1) L ook through the view finder on transmitter and receiver. Adjust with the mounting hole and the vertical adjustment
nut until the opposite unit is centered in the finder.
＊H orizontal Adjustment
Accessible through the mounting hole.
Adjustable range is 10°(±5°) .
＊V ertical Adjustment
U se the vertical adjustment screw on
the back. Adjustable range is 8°.
U se rigid steel conduit (J I S C 8305) .
U se junction boxes, couplings, sealing fittings and flexible fitting shaving pressure and explosion proof construction.
U se lock nuts for rigid metal conduit.
Conduit is connected to fittings or terminal boxes with parallel pipe threads . T ighten with lock nuts after threading
5 threads or mere.
U se flexible fittings or couplings where flexibility is required. T he inner radius when bending a curve must be 5 times
or more the outer diameter of fitting tube.
Do not use a wrench on the flexible fittings.
Mount the sealing fittings on the conduit as described below.
F ill the inside of the fittings with compounds to shut off the conduit pipe.
b) I f you use J I S N o.54 or. bigger number conduit pipe, fill the fittings with compounds close to 'and within 45cm from
the terminal box or the like which includes wire junction in.
(T he closer, the better. )
c) Whithin 45m from the box and as close to it as possible on the conduit which is feeding in or out of the terminal box
or junction box in a distributor panel.
T erminal box coverH exagon B olt
(T ypical)
(3) After wiring, re-attach the terminal cover.
(4) R efer to E xplosion-proof standards for other wiring work.
(2) T he following figures show terminal arrangement. Connect 100V power source with 100V , terminals on transmitter
and receiver. Connect the wires from control panel with the contact terminals on receiver.
ALIGNME NT
3
10°
Mounting H ole
8°
V ertical adjustment nut
Alignment V iew F inder
Alignment V iew F inder V ertical adjustment nut
(2) PB -400E X(1) PB -100E X, PB -200E X
32
T ransmitter R eceiver
Ground
Power
AC100V
T o Control Panel
Alarm signal
Ground
Power
AC100V
AC100V ALARMAC100V
H azardous area N on-hazardous area
R igid steel conduct
Pressure & explosion proof work
J unction box
R ecieverT ransmitter Control panel