1. Jayson A. Gamil Millwright/Mechanical Technician gamiljayson@ymail.com
JAYSON A.GAMIL
Mechanical Technician / Mechanical Foreman
Sampaga west, Batangas city 4200 Philippines contact # +63 920-212-6570
e-mail address: gamiljayson@ymail.com +63 906-562-5531
+507- 653 3-7693
First Quantum Minerals (FQML)
Coal Fired Power Project
Cobre PANAMA
Millwright / Mechanical Fitter
(March 06, 2016 up to Present)
 To align motor and pumps – Pumps to gearbox using dial indicator method
 Assembling of Reclaimer
 Sighting elevation of foundation
 Assembling and tightening of rails for Reclaimer
 Installation of Rollers and Belt conveyers
 To establish correct bolt projection as per drawing
 To install tank for feed water and pumps
 To layout the center line, position and elevation of tanks including grouting of
foundation
 Setting up of packer plates using dumpy level prior to grouting as per
drawing
 Understanding drawing both civiland mechanical
 Assist to vendor for installation of turbine and compressor
 Installation of boogie and bearings for the Reclaimer
 Establish the correct elevation in all equipment using appropriate leveling
instrument
 Follow and understand safety rules and regulation and providing additional
safety information and guidelines.
 Offering some additional safety measures according to previous experience
 Serves as a leader in the team in which I belong to due to my wide knowledge
and technique
SKILLS
 Alignment of motor and pumps using DIAL INDICATOR method
 Leveling / Surveying
 DrivingLicense # D01-07-007471
 Machining
 Over ten (10) years valuable accomplishments and worthwhile experiences in
almost all fields of mechanical.
 Engaged and successfully completed large-scale construction of oil, gas and
mining industry, and refineries, petrochemical and power projects, and
maintenance.
 Apply/secure work permit and fill up Job Hazard Analysis
 Overhauling pumps, replace wear parts such as volute liner, impeller and
mechanical seal.
 Assist vendor overhauling steam turbine; check the condition of its
emergency stop valves,
 Governor valve, diaphragm, rotor, blades and bearing assembling.
 Final coupling alignment of steam turbine and all rotating equipment
 Inspection and repair of bars and casting in boiler area.
 Pull out and install different types of valve.
PERSONAL INFORMATION
Address:
Sampaga west Batangas City
Date of Birth:
April 05,1980
Place of Birth:
Balatero,PuertoGalera,
Oriental Mindoro
Civil Status
Married
Citizenship
Filipino
Trainings and Seminars
BOSIET Training
January 22-24 2015
BASIC Training
January 28- February 04 2015
Basic Auto cad
September 2014
Permit to Work
July 20, 2007
Awareness Modules
August 7-9, 2007
Toolbox Modules
August 8,9,16 2007
Other Trainings
Technical Education Skills and
Development Authority (TESDA)
Machining NC I
Certificate# 12040101006604
(B.O.S.H.E.T)
Basic Offshore Safety Health and
Emergency TrainingP& I D.
Piping and Instrument Diagram
HYTORC Training
Standard Torque / Tension
PASSPORT # EB5370577
SSS # 04-3177809-5
TIN # 301-977-738-000
Driving License #
DO1-07007471

2. Jayson A. Gamil Millwright/Mechanical Technician gamiljayson@ymail.com
MafumeiraSul Project
Block-0 Malongo Cabinda Angola
Daewoo Shipbuilders and Marine Engineering (DSME)
Dimension all Manpower Incorporated
(May 01, 2015 to November 08, 2015)
DUTIES and RESPONSIBILITIES
 Serve as a team leader in the absence of my supervisor
 Has an ability to communicating with client in oral or written on a very polite
manner.
 Combine and raise a good idea to have time efficient and avoid reworks
 Suggest and execute very good work analysis
 Trusted by superintendent for every task even without supervision
 Because of my ability and experience, work was done in a very simple way.
 Accomplish assign task even without supervision
 Preservation of all mechanical equipment and components as required
 Perform installation of all rotating and static equipment including alignment
and levelling
 Follow safety rules and regulations religiously and share my wide experience
and skills to boost safety awareness.
 To finish assign task but not harming the environment.
 Knowledge and skills in reading and using of precision tools
 Centering/Leveling of skid using machinist level, square level etc.
 Follow and understand P&ID.
 Levelling and centring of skid and flanges to eliminate pipe stress.
 Correcting soft foot on motor or gearbox if there is any.
 Leveling, centering of anchor bolts using dumpy level & electronic level.
 Alignment of pumps, motor, gearbox compressor and turbine using laser
alignment method
 Filling correct and exact amount of oilfit for gear boxes speed to enhance its
reliability and durability, filters as well.
 Perform lathe machining, milling and grinding
 Using of manual torque with standard torque value for small bolts.
 Torqueing of bolts using standard torque value
 Lay out and execute cutting of bars for special purposes using cutting torch.
 Installation and maintenance of temporary water facility
 Perform pipe cutting using precision cutting tools. (TRI-TOOL) cutting
machine
 Setting up and using of pneumatic torque wrench
 Support other team so as the work will be efficient.
 Attend safety seminars and training as company requirements.
 Recondition and maintenance of pneumatic tools and portable blowers.
L.ARMANI TRADING & GENERAL SERVICES
727 Sitio D’Hope, Brgy. Libjo
Batangas City, Batangas 4200 Philippines
Mechanical Foreman
(May 5, 2014 – March 6, 2015)
 Directly report to supervisor.
 Giving instruction to subordinates.
 Taking the lead for all safety matters.
 Pull out and install different types of valve.
 Disassembles and assembles of columns, vessel drums and heat exchanger
 Cleaning of suction basket strainer
 Blind and de-blinds flanges, bolt tensioning and torque.
 Operation assist for commissioning(start-up)
EDUCATIONAL
BACKGROUND:
AMA Computer College
Bachelor of Science in
Computer Science
BolbokCampus Bolbok
Batangas city Batangas
4200 Philippines
TESDA Regional Training
Center – CALABARZON
P. Herrera st.Batangas City
4200 Philippines
Machining (NC-1)
Special Award:
Two time recognized by the
client safety team for exemplary
safety performance.
 To perform lathe machine
operation
 Assess and pass course
qualifier
 Given a license by Technical
Education and Skills
Development Authority
(TESDA) for lathe machine
operation
 Satisfactorily completed the
required number or hours
studying lathe machine
operation
 As a class president, I am
responsible to perform the
best and serve as an
example to the group
 To perform grinding
operation using surface
grinder
 To perform drilling operation
using drill press machine
University of Batangas
Hilltop road,KumintangIlaya
Batangas city
Bachelor of Science in Civil
Engineering
(College level)

3. Jayson A. Gamil Millwright/Mechanical Technician gamiljayson@ymail.com
 Perform other duties and responsibilities such as internal cleaning and de-
coking
 Assist in loading catalyst in flat former.
 Hot bolting/first pass, second pass and final pass with corresponding torque
value
 Practice and perform health and safety procedure
PNG / LNG Esso Highlands Limited
Hides Southern Highlands Papua New Guinea
Chicago Bridge and Iron (CB&I)
(November 15 2012 -April 13 2014 –Millwright)
 Work as a team leader
 Work very flexible, depends on rapid changes of work schedule
 Reporting completed jobs using computer and updating ongoing task
 To perform mechanical equipment installation
 Preparation of skid for rotating and static equipment
 Installation of internal trays, pig launcher etc.
 Installation of compressor and turbine
 Layout Turbines and Compressors
 Perform civilworks to help secure the stability of equipment.
 Assembling ducting, filters, fin fan coolers, turbine and compressors casing
etc.
 Securing equipment stability and eliminating soft foot to enhance
itsreliability and optimum performance
 Surveying, calculating slopes, reading civil and mechanical drawings
 Sighting elevations of manhole, catch basin and any other civil related
activities.
 Centering/Leveling of skid using machinist level, square level etc.
 Leveling, centering of anchor bolts using dumpy level &electronic level
 Alignment of pumps, motor, gearbox and turbine using laser alignment
method
 Alignment of motor and pump using reverse dial indicatormethod and face
and rim as well
 Eliminate pipe stress using precision tools
 Setting up and using of pneumatic torque wrench
 Torqueing of bolts using standard torque value
 Grouting of foundation
 Cutting of Pipe using precision cutting tools. (TRI-TOOL) cutting machine
 Trained and certified worker in confined spaces
 Trained and certified Self Contained Air Breathing Apparatus (SCBA) use
 Trained and pass to working at height
Naptha Cracker Project
Equipment Engineers Incorporated Corporation (EEI)
Barrio SimlongBatangas City Batangas 4200 Philippines
(June 2012 - November 2012 - Mechanical Fitter)
 Installation of equipment such as motor, pump, compressors etc.
 Using precision tools and levelling equipment
 Responsible in installation and levelling of flare stock, securing its stability
and pipe connection
 Recognized by supervisor for the correct and exact bolt lay out prior to
installation.
 Performing different types of modern and old alignment method.
 Tightening of bolt using standard torque value.
 Using of manual torque, HYTORQ & Tensioning machine
 Surveying, calculating slopes, reading civil and mechanical drawings
 LayoutTurbine and Compressor foundation
 Installation of skid, packer plate, soul plate, grouting and levelling
References:
Domingos Coelho
Senior Mechanical Supervisor
First Quantum Minerals (FQML)
Coal Fired Power Project
Cobre PANAMA
Contact # +507 6579-6287
Email: dsg.61c@gmail.com
Engineer Jayson Evia
Project Engineer
Dimension All Manpower
Incorporated
MafumeiraSul Project
Daewoo Shipbuilders Marine
Engineering (DSME)
CHEVRON Angola Project
Contact #
+63 9951761982
Armando C. Lazarte
General Manager
L. ARMANI Trading and General
Services
727
SitioD’Hope,LibjoBatangasCity,
Batangas 4200 Philippines
(043)723 2528 /402 2593
Mobile # +63 919 6015574
Engineer Eric Quintero
Mechanical Engineer
Contact #
+81 07064530915
Email: hh1834@ihi.co.jp
ericquinn05@gmail.com
PNG/ LNG Project
ESSO Highlands Limited
Southern Highlands Papua New
Guinea
Engineer Teddy Espeleta
Sr. Mechanical Superintendent
Japan Gas Corporation
Philippines (JGC Philippines)
Contact #
+63 997 541 8582

4. Jayson A. Gamil Millwright/Mechanical Technician gamiljayson@ymail.com
Japan Gas Corporation Philippines (JGC Philippines)
Maintenance Division
Riotuba, Bataraza Palawan Philippines
(April 2007 -February 2012 - Mechanical Technician)
 Mechanical LEADMAN when Plant is on Scheduled for Major/Minor
Shutdown.
 Has the technical procedure to replace bearing assembly of Autoclave
Agitators, also mechanical seal replacement of Titanium agitator blades and
any other mechanical works within Autoclave and HPAL area.
 Overhaul, repair, troubleshooting of rotating mechanical equipment oil
refinery processing plant, e.g. pumps, turbines, compressors, fans and blowers.
 Do the necessary and accurate diagnosis during the malfunction of equipment
to make the job easier ahead of schedule but not sacrificing safety.
 Disc Separator replacement, cleaning of strainer, replacement of internal
parts on 2/2 way valves. Diaphragm replacement, Piston ring, piston cylinder
liner replacement and other related mechanical activity on GEHO pumps.
 Has the capability to perform several pump and motor alignment, and also
belt driven pumps with accurate tension and adjustments.
 Carry out the proper preventive maintenance on such equipment to enhance
its reliability and efficiency in conjunction to optimum plant production.
 Perform mechanical trouble shooting on LEWA pump (acid unloading pump)
 Carry out inspection for all mechanical equipment, perform preventive
maintenance and repair in storage tank suction and discharge.
 Replacement of shafting blades to make sure and enhance its reliability and
optimum production without any injury and harm to environment.
 Has the capability and knowledge on valve replacement on GEHO PUMPS
(suction and discharge cone valve).
 Perform daily scheduled maintenance activity plant wide such Boiler/Utilities
- Ore Preparation / high pressure Acid Leach / Counter Current Decantation /
pre Neutralization / Mix Sulphide and other related area within.
 Technical Knowledge on Travagrate overhauling in boiler coal feed/fire.
 Adherence to standards of proper alignment procedures in refinery practice
using the conventional & reverse dial indicator method.
 Initiate the proper evaluation failures and recommend the necessary
mechanical repair.
 finish the job ahead of schedule
 knowledge in overhauling rotating equipment such as pumps
(centrifugal/reciprocating/rotary), turbines (steam/gas turbine)
compressors (centrifugal/reciprocating) fans, blowers and other auxiliary
equipment.
 Work in the proper implementation of established maintenance procedures
without sacrificing safety and environment
 Follow and understand P&ID.
 Lay out and execute cutting of bars for special purposes using cutting torch.
 To fabricate jig for dial indicator alignment or any other special tools.
 Observe the established safety practices in carrying the assigned task.
 Securing proper alignment and condition of drum washer or throw mill
 Maintenance servicing of scrubber
 Maintenance servicing of ball mill