The Modra Timber Venetian Turbo Machine was used to cut timber slats to the required length, punch holes in the right place and then automatically install the slats into laddering. The complete assembly forms part of a Venetian Blind The TV Turbo machine was the top of the Modra Range, unfortunately this machine was not technically or commercially successful.

1. TimberVenetianSlat
FASTER...EASIER...MOREEFFICIENT...HIGHERPROFITS!
automaticCUT&PUNCHmachine
Simply
theBest!
Simply
theBest!
OUTPUT
8-16 minutes
per blind!*
Based on the fact that by
traditional methods a blind
typically takes 56 minutes
to produce.
50-80 blinds
per day!
SAVE
Designers & manufacturers of labour saving machines for fabricating
Productivity through Innovation
Europe Office
3C Merebrook Business Park,
Hanley Rd, Malvern, Worc. WR136NP
United Kingdom
Telephone/Fax: + 44 1684 893 799
Asia Pacific Office
PO Box 3150, Logan City DC 4114
Unit 1/33 Nestor Drive,
Meadowbrook Qld 4131
Telephone: +61 7 3200 9988
Modra supports its automatic machine customers with a world-wide servicePreventative Maintenance Plan
Punches and cuts in one machine!
another example of Modras' 'smart manufacturing'
Reduces costs, uses less space and streamlines your operations
Fast bar-code set-up … simple operation
Features:
+
+
+
+
+
+
+
+
+
Fast
Simple
Economical
Versatile
Convenient
Accurate
Clean Cut
Clever
Quality
, affordable machinery using a single or multiple punch and a single cutting
device.
Eliminates quite a number of the steps needed to make a blind reduces
your blind manufacture time by 7 to 14 minutes
Operator can perform other duties while the machine runs. Save
another 2 minutes of labour time
Easily reset for different slot widths up to four sizes in one Punch Head.
Need a replacement slat? Remake it with the sweep of the Bar Code
Reader.
- achieved by the rotary encoder feedback.
Modras' unique Saw Blade design ensures a great cut on wood, PVC,
Composite
- the machine decides how many slats can be cut from a length then
dispenses it and other features
Tooling, Siemens PLC Controller, LCD Display etc. Built to Last.
Overall timesaving makes this machine the most efficient labour-saving unit available. Total time to
cut and punch 30 slats is 2.5 to 4 minutes. During this time the machine runs without the operators
intervention. Conversely, manufacture with Competitor machines takes 7-12 minutes more because
there are lot more operations such as setting Punch positions, storing and labelling slat between
operations, setting stops, manually performing the cut - none of which is needed on the TVT
Cleaner cut - only one slat at a time using the special support anvil gives unsurpassed results. The
anvil support is always kept in good order - as the cutting blade is used to renew it!
Eliminates the risk of operator error in cutting lengths of slat. A Bar Code Read and the independent
measuring roller and a feedback encoder ensures accuracy.
Cleaner, Quieter, and Safer - the saw is fully enclosed - dust is almost negligable

2. Laddering functions (most of these functions are NOT
offered on competitor machines)
+
+
+
+
+
Run with String or Ribbon (woven) Ladder Tape on
the same machine!! Easy change-over.
Easily set for slat widths of 25-60mm, (up to 84mm
optional), and 1”to 2.5”
Fine ladder station width adjustment for odd widths
of ladder string or slat.
Thread with or without the Head Box (not offered on
some competitor machines)
Automatic zig-zag compensation for different slat
widths.
Int. Pat. No. PCT/AU99/00280
Whatever size your business, you will save with a TV Turbo.
Let Modra calculate how much you'll be save every year you will be surprised.
Phone or fax today for a full specifications sheet and/or video.
Three steps to higher productivity & lower blind cost
FIRST
SECOND
THIRD
The
The
The
- combine operation steps and automate them.
+ A factor not easily understood, that combining the cutting and Punching
operations into the one action substantially reduces labour time. Its not
the time associated with the actual cut, its all the other activities that
occur when the two operations are separate adding up to minutes (7 to
12) of lost labour time if you are not using a TVT.
- eliminate set-up!
+ With the Modra TVT MkI or MkII it is possible to almost entirely eliminate
time wasted in setting machinery. Save 4-10 minutes per blind.To have
this explained in more detail, contact Modra for an information sheet or
visit our premises for a demonstration.
- keep an open mind!
+ Overcoming your natural resistence to change to new methods!! Don't
just believe us visit one of the Modra facilities and measure times of
production for yourself. Choosing a competitor machine is choosing old
technology and will limit your competitiveness.
Small manufacturers
You too can benefit by using your machine for even as little as 2 hours a day. Using the TV
Turbo, in that time a single employee could produce 15-20 blinds.
Further advantages with the TVT MkII
+
+
+
+
Choose the Auto Ladder Station Positioning option and the
Ladder Stations move to position automatically saving 3 to 5
minutes per blind in setup Time!
Pre-program the whole days work into the machine (up to 150
jobs). The only function for the operator is to load the Head
Rail and slat.
The Two Punch (or more) option operates simultaneously with
the Saw for super high output.
How clever is this two slats for the next job are fed before the
Head Rail for the current job is loaded into the machine. The
operator can then insert (ladder lock) the top two slat into the
Head while the current job is being produced by the TVT
(saves 2 to 3 minutes and increases capacity of the machine
when the Head Box is being used in the Ladder Stations).More Advanced options
+ "routless" or “no holes” cut and punch for better light block-out
A wise investment
+
+
+
+
+
+
To do all you want you don't need two separate machines just one.
Less floor space is required as the TVT punches and ladders and CUTS in one.
Modra builds flexibility into its designs. It does all you need to do now and in the future.
Built to last. Replacement costs of worn parts in Modra machines are less than for other
machines!
Long Term Service and support. Modra is the only company offering a planned
Preventative Maintenance.
The TVT will save tens of thousands of dollars a year compared to competitor machines
Multiple operating combinations (modes)
+ (up to 100 blinds per day)
+
+ (up to 120 blinds a day) Pre-program up to 5
+ (up to 150 blinds per day, allowing for 1-2 minute
set-up of laddering stations)
+ (option) - It is possible to use the machine to just
punch holes in the slats
Cut punch and ladder in one go
One machine. One employee.
Cut and punch only
Ladder only
Punch Only
Note! If you are currently threading by hand the TVT
will reduce your manufacturing time by 5 to 8 minutes
per blind or more depending on options selected.