The power distribution and the communication industries alike has a larger dependency on managing cable as the wires that gets utilized in the distribution of power and communications  requires  to get extended and interleaved in such a manner so that the hazards like the breaking out of the fire gets to check.

1. WELCOME TANYA GALVANIZER
Supplier & Consultant of Hot Dip Galvanizing

2. Introduction to The Various Categories of Cable Trays Manufactured by
Indian Companies
The power distribution and the communication industries alike has a larger dependency on
managing cable as the wires that gets utilized in the distribution of power and
communications requires to get extended and interleaved in such a manner so that the hazards
like the breaking out of the fire gets to check. Cable tray plays a crucial role in both of these
industries.

3. This article shall discuss about different categories of the cable tray that
is manufactured by the various cable tray manufacturer in India.
• Stepladder cable trays
• Channel cable trays
• Single cable rail
• Wire basket

4. Stepladder systems find the maximum of its uses in power distribution. These cable ducts
accessory appears in the scene in steps to secure the cables in the effective manner. These get
installed with the efforts of the specialists in the application. In case the cover is not required, the
percolation of air is allowed to ensure proper ventilation across its open space. If one among the
several of its benefits of these trays is to be mentioned, it shall be the fact that the process does
not allow the development of moistures inside as the wire gets sufficiently exposed to air and light.
Stepladder cable trays

5. Channel cable trays
Trough or the channel trays are generally used to support wires of comparatively lesser sizes that
range between five to twelve feet in length. This category of trays supports those cables that yield
lesser amount of heat. These trays for cables allow a smaller extent of ventilation. These trays can be
formed either of metallic or nonmetallic materials.

6. Single cable rail
These categories of cable ducts can be installed very easily. It can be availed in either
single or multiple tiers. Typically, these are ten to twelve feet in length that can be
intersected very easily through this arrangement. It finds its typical application to
channelize the wire in power systems of low and medium voltage capacities.

7. Wire basket
This category of trays finds its application across the telecommunication industry specifically. It is the
idealistic suits the wires of low voltage and fiber optics. Usually it is manufactured out of steel and in
some cases it can be availed with a lamination of zinc on it too. Cables between three to eight feet in
length can be channelized easily through this category of the tray.
For more information
visit: http://www.galvanizers.co.in/cable-trays.html

8. For more information visit: http://www.galvanizers.co.in/cable-trays.html
Contact Us :-
Address :- Plot No. 289-290, Manjusar GIDC, Nr Bombardier Circle, Manjusar Savli,
Vadodara ( 391775 )
Phone :- (0265) 2632517 (0)
Phone :- +91 8000842648
Email :- info@galvanizers.co.in
Website:- https://www.galvanizers.co.in/

9. THANK YOU