Progress Report - UKG Analyst Summit 2024 - A lot to do - Good Progress1-1.pdf
Testing/Manufacture/Cross Hatch Tester
1. FEC
R
World Class Filter Testing Equipments
An ISO 9001 Certified Co.
Sales Office: 9A, Gurudwara Road, Hari Vihar (Kakraula), Opp. Metro Poll No. 816, New Delhi
110043 (INDIA).
Correspondence Address : Plot No. 35, K-1 Extn, Bank Wali Gali Gurudwara Road, Mohan Garden,
Uttam Nager, Delhi -110059.
Cell - 9811478874, 9811938703, 9212912990
E-mail - info@fecproduct.com/ inquiry_fec@yahoo.com
Website - www.fecproduct.com
FEC Cross-Cut Test of Paints and Varnishes, ISO 2409, BIS
This test describes a method for assessing the resistance of paint coatings to separation from substrates when a
right-angle lattice pattern is cut into the coating, penetrating through to the substrate. The property measured by
this empirical test procedure depends, among other factors, on the adhesion of the coating to either the preceding
coat or the substrate. The method described may be used either as a pass / fail test.
The Cross test is used to access adhesion of paint coating. This cutter having single cutting blades. Test is carries
out by performing crossed cuts at right angle. After clear with adhesive tape or brush.
1mm model - 11 Blades (Coating upto 60 microns)
2mm model - 6 Blades (Coating above 60 microns)
3mm model - 6 Blades (Coating 120 - 250 microns)