1) The document is a catalogue for an abrasion tester manufactured by FEC, an ISO 9001 certified company based in New Delhi, India. 2) The abrasion tester is used to test and determine the pilling and abrasion resistance of different fabrics like non-woven, woven, coated and knitted fabrics. 3) It subjects specimens to controlled rubbing at low pressures and in continuously changing directions to assess the resistance level of fabrics to abrasion by measuring mass loss or number of rubs to break a yarn.

1. FEC
R
World Class Testing Equipments
An ISO 9001 Certified Co.
Catalogue of Abrasive Tester

2. Sales Office: 9A, Gurudwara Road, Hari Vihar (Kakraula), Opp. Metro Poll
No. 816, New Delhi 110043 (INDIA).
Correspondence Address : Plot No. 35, K-1 Extn, Bank Wali Gali Gurudwara
Road, Mohan Garden, Uttam Nager, Delhi -110059.
Cell - 9811478874, 9811938703, 9212912990
E-mail - info@fecproduct.com/ inquiry_fec@yahoo.com
Website - www.fecproduct.com
FEC The relable Manufacturer, Exporter and Supplier of precisely designed martindale Abrasion Tester. It is used
for testing and determining the pilling and abrasion resistance of different fabrics, which includes non-woven,
woven, coated and knitted fabric. Our Martindale Abrasion Tester is specifically designed to subject the specimen
under controlled rubbing, at low pressures and in continuously changing direction. The test is conducted to access
the resistance level of fabrics to abrasion, which is determined through the loss in mass of specimen or by number
of rubs ro break a yarn.
Features
?Excellent tests result
?Optional extra PC connect Interface
?Automatically Replace Nozzle
?Beable to preset tensile force
?Continuous measuring mode
?Adopt micro computer command scheme
?Completely self acting electronic lone
?Exceptional conceived pneumatic clamp can satisfy the obligations of diverse kinds of check materials.
Technical Specification
No. of heads : 4
Working Pressure on test specimen : 3KPA, 9KPA and 12KPA
Exposed area of test specimen : 6.475 cm2
Maximum Available Pressure : 12KPA (790 gms)
Rotational speed of outer peg : 48- 2 RPM
Drive ratio of outer and Inner peg : 24mm for pilling 60 mm for Abrasion
Power Supply : 230 V AC 50 Hz
Power Consumption : 0.2 KWH
Related Standards : ISO 5470, BS 3424, 5690, JIS L 1096, ASTM 4366 / 4970-99, DIN
` 53863, 53865, SFS 4328