Anilkumar1
•Download as DOC, PDF•
0 likes•58 views
The document describes a Matlab program to generate a unit impulse signal. The program defines a time vector t from -2 to 2 in steps of 1, creates a vector y with zeros except for a 1 in the middle, and uses stem to plot the impulse response against t. The observation is that the desired waveform is obtained.
![PROGRAM:-3
AIM-
Program for the generation of unit impulse signal.
TOOLS REQUIRED-
P.C , matlab 7.0
PROGRAM:
t=-2:1:2;
>> y=[zeros(1,2),ones(1,1),zeros(1,2)];
>> stem(t,y);
>> ylabel('amplitude');
>>xlabel(‘n’)
OBSERVATION:
RESULT-
Desired waveform has been obtained.
PRECAUTION-
1. Observe the waveform carefully.
2. Take the value of constant keeping care of all constraint.](https://image.slidesharecdn.com/anilkumar1-111002085334-phpapp01/85/Anilkumar1-1-320.jpg)
Recommended
More Related Content
More from Ashok Singh
Recently uploaded
Recently uploaded (20)
Anilkumar1
- 1. PROGRAM:-3 AIM- Program for the generation of unit impulse signal. TOOLS REQUIRED- P.C , matlab 7.0 PROGRAM: t=-2:1:2; >> y=[zeros(1,2),ones(1,1),zeros(1,2)]; >> stem(t,y); >> ylabel('amplitude'); >>xlabel(‘n’) OBSERVATION: RESULT- Desired waveform has been obtained. PRECAUTION- 1. Observe the waveform carefully. 2. Take the value of constant keeping care of all constraint.