![PROGRAM:-3
AIM:
Program for the generation of unit impulse signal.
TOOLS REQUIRED:
P.C , matlab 7.0
PROGRAM:
t=-2:1:2;
>> y=[zeros(1,2),ones(1,1),zeros(1,2)];
>> stem(t,y);
>> ylabel('amplitude');
>>xlabel(‘n’)
OBSERVATION:
RESULT:
Desired waveform has been obtained.
PRECAUTION:
1. Observe the waveform carefully.
2. Take the value of constant keeping care of all constraint.](https://image.slidesharecdn.com/stepimpulse-111002085330-phpapp01/85/Step-impulse-1-320.jpg)
Recommended
More Related Content
More from Ashok Singh
Recently uploaded
Recently uploaded (20)
Step impulse
- 1. PROGRAM:-3 AIM: Program for the generation of unit impulse signal. TOOLS REQUIRED: P.C , matlab 7.0 PROGRAM: t=-2:1:2; >> y=[zeros(1,2),ones(1,1),zeros(1,2)]; >> stem(t,y); >> ylabel('amplitude'); >>xlabel(‘n’) OBSERVATION: RESULT: Desired waveform has been obtained. PRECAUTION: 1. Observe the waveform carefully. 2. Take the value of constant keeping care of all constraint.