Intrusion Detection Systems Objectives In this lab, st.docx

•Download as DOCX, PDF•

0 likes•2 views

Intrusion Detection Systems Objectives In this lab, students will examine the following objectives. Differentiate the use of IDS and IPS to detect network attacks Design a network with IDS/IPS. Justify the use of IDS/IPS for a given network solution. Scenario A small company is using the topology shown below to secure its intranet while provides a less-secured environment to its eCommerce DMZ server. The company is concerned firewalls are not enough to detect and prevent network attacks. Hence, deployment of sensors to Intrusion detection systems (IDS) and/or intrusion prevention systems (IPS) are needed in the network. Your job is to provide recommendations including a network design with IDS/IPS that meet company’s requirements. Initial Topology Company’s Requirements Detect any malicious traffic entering the ecommerce server without performance penalty to traffic getting in the server from revenue-generating customers. Stop any malicious traffic entering the human resources LAN (HR LAN). Detect any malicious traffic entering the computer terminal in the marketing LAN (MKT LAN). Stop any traffic entering the File Server in MKT LAN. Deploy a centralized database and analysis console in the intranet to managing and monitoring both; IDS and IPS sensors. Note: RED text indicates the required questions to answer Task 1—Layout the New Network Design Click on the Initial Network Topology link at iLab tab in week 7, and save in your computer the power point file Initial_Network_Topology_iLab7.ppt . This file contains a diagram for the initial network topology and pictures of all components needed to create the new network design. Review the documentation provided in the references at the end of this instructions, to get more familiar with the implementation of IDS and IPS in network design. You need to find a network solution that meets company’s requirements. #1. Paste below your new network design diagram. Task 2—IDS/IPS Recommendations #2. Write an engineering specification document of at least 250 words (e.g. 1 page of full text, double space & size 12) describing why your networks design meets each of the company’s requirements. Justify how each recommendation addresses the company’s needs. Task 3— Conclusions #3. Describe in two paragraphs your learning experience in this lab. .

Education

without performance penalty to traffic getting in the server from
revenue-generating customers.
Stop any malicious traffic entering the human resources LAN
(HR LAN).
Detect any malicious traffic entering the computer terminal in
the marketing LAN (MKT LAN).
Stop any traffic entering the File Server in MKT LAN.
Deploy a centralized database and analysis console in the
intranet to managing and monitoring both; IDS and IPS sensors.
Note:
RED
text indicates the required questions to answer
Task 1—Layout the New Network Design
Click on the
Initial Network Topology
link at iLab tab in week 7, and save in your computer the power
point file
Initial_Network_Topology_iLab7.ppt
.
This file contains a diagram for the initial network topology and
pictures of all components needed to create the new network
design.
Review the documentation provided in the references at the end

of this instructions, to get more familiar with the
implementation of IDS and IPS in network design.
You need to find a network solution that meets company’s
requirements.
#1.
Paste below your new network design diagram.
Task 2—IDS/IPS Recommendations
#2.
Write an engineering specification document of at least 250
words (e.g. 1 page of full text, double space & size 12)
describing why your networks design meets each of the
company’s requirements. Justify how each recommendation
addresses the company’s needs.
Task 3—
Conclusions
#3.
Describe in two paragraphs your learning experience in this lab.

Similar to Intrusion Detection Systems Objectives In this lab, st.docx

01-01-2017 This section will lay out the implementation plan of the entire Authentic Assessment Project (AAP) design, which include configuration of key networking devices, detailing milestones, activities, resources, and budgets, as well as providing a deliverables schedule. Project Implementation Plan In this lecture I will discuss implementation plan through an example of an enterprise network. The figure presents a fictitious enterprise factious network. The company would like to implement a scalable solution with a routing protocol that provides fast convergence. For optimal routing and packet forwarding, hierarchical addressing with summarization is required. Users require high-speed access to the server farm with redundant connectivity for protection. The company has many remote offices; a redundant connection to the Internet is required to provide the remote offices with nonstop access to its server farm. For remote offices, a secure connection must be implemented to prevent unauthorized persons from accessing data. The first step before creating an implementation plan is to gather existing information about the networks and all the requirements. The existing topology provides redundant connectivity among all the network devices. Internet connectivity is dual homed, which provides redundant access to the remote sites as well as World Wide Web resources. The equipment can provide all the functionalities that are required, but the software version of the operation system must be upgraded. The networking equipment has existing IP addressing that needs to be changed to ensure optimal routing and forwarding of packets as well as summarization. Requirements for server farm access and remote office connectivity do not include changes in QoS configuration. The server farm hosts the critical applications of the company including VoIP, and these require preferred treatment. OSPF is configured in the network. This configuration must be changed, because a faster convergence time is required. EIGRP is better choice than OSPF. Security configuration is required to provide secure access to terminal resources. In this case existing security is sufficient, therefor no changes are needed. For this scenario implementation plan would be · Project contact list · Location information and means of accessing the premises · Tools and resources · Assumption · Task and detailed description · Network staging plan Project Contact List Consultant Project Team Customer Project Team Project Manager Telephone E-Mail Project Manager Telephone E-Mail Configuration Engineer Telephone E-mail Configuration Engineer Telephone E-mail Project Coordinator Telephone E-mail Project Coordinator Telephone E-mail Equipment installation Plan Location Details Floor Room Rack Number Tools Required Item Number Item 1 PC with a VT 100 emulator, 10Base-T interface, FTP Server, TFTP client application 2 Console port cable DB9-RJ45/DB25 3 10Base-T Ethernet cable The implementa ...

01-01-2017 This section will lay out the implementation plan o.docx

honey725342

Isset Presentation @ EECI2009

Isset Internet Professionals

Cis 175 Enthusiastic Study / snaptutorial.com

GeorgeDixon96

Cis 175 Success Begins / snaptutorial.com

Robinson066

Network Design for a company

rosu555

Assignment Content After reviewing your latest submission, the CIO has found some areas of concern and would like you to provide a little clarity on one subject. He is meeting with upper management to persuade them to purchase a new suite of intrusion detection software for the network. Currently, the organization has antivirus software and uses firewalls. Provide justification for adding intrusion detection software (IDS), as well. Research various IDS that would benefit the company. Create a 2-page table for the CIO to share with upper management. Include the following: Reasons why IDS would benefit the company and the larger cyber domain Descriptions of the categories and models of intrusion detection and prevention systems A description of the function of antivirus software, firewalls, and IDS Examples of commercial software that could provide the solution Include citations as necessary in APA format. Submit your assignment. .

Assignment ContentAfter reviewing your latest submission, the .docx

williejgrant41084

Cis 534 Technology levels--snaptutorial.com

sholingarjosh62

Case Study: The Ethical Hacker Due Week 3 and worth 70 points Imagine for a moment that you are a hacker; an ethical one. You are called upon by law enforcement based on your expertise to hack into a network of a business known to be launching crimes against humanity as its primary mission for operation and capital gain. Assume you are not to be concerned with any politics of the job and your actions are legal and ethically justified. This nefarious business takes its own security seriously and therefore has implemented several forms of network security such as firewalls, Web proxies for its Web gateways, and VPNs for remote users. You also know that this business exists much like any normal corporation, renting several floors of office space to accommodate between 100-200 employees. Also imagine that the business’s entire network

Cis 534 Enthusiastic Study / snaptutorial.com

Stephenson05

181472589 basis project report

IsmailSaruar

Documentation

Rajesh Seendripu

List and describe various features of electronic systems. List and discuss the steps in designing an embedded system. Solution Electronic system level (ESL) design and verification is an emerging electronic design methodology that focuses primarily on the higher abstraction level concerns. The termElectronic System Level or ESL Design was first defined by Gartner Dataquest, an EDA-industry-analysis firm, on February 1, 2001. It is defined in the ESL Design and Verification book as: \"the utilization of appropriate abstractions in order to increase comprehension about a system, and to enhance the probability of a successful implementation of functionality in a cost-effective manner.\" The basic premise is to model the behavior of the entire system using a high-level language such as C, C++, LabVIEW, or MATLAB or using graphical \"model-based\" design tools like SystemVue, VisualSim Architect or Simulink. Newer languages are emerging that enable the creation of a model at a higher level of abstraction including general purpose system design languages like SysML as well as those that are specific to embedded system design like SMDL and SSDL supported by emerging system design automation products like Teraptor. Rapid and correct-by-construction implementation of the system can be automated using EDA tools such as high-level synthesis and embedded softwaretools, although much of it is performed manually today. ESL can also be accomplished through the use of SystemC as an abstract modeling language. Electronic System Level is now an established approach at most of the world’s leading System- on-a-chip (SoC) design companies, and is being used increasingly in system design.[citation needed] From its genesis as an algorithm modeling methodology with ‘no links to implementation’, ESL is evolving into a set of complementary methodologies that enable embedded system design, verification, and debugging through to the hardware and software implementation of custom SoC, system-on-FPGA, system-on board, and entire multi-board systems. Second Part An embedded system is one with computing hardware that has software “embedded” in it as one of its core components. We are surrounded by embedded systems that add luxury to our lives like mobile handsets, washing machines, microwaves, ATM machines, and air conditioners, to name just a few. Because of certain application requirements, engineers have to approach embedded design in a different way than other types of designs. The following offers a brief step-by-step approach to follow while designing an embedded system 1. Proposal: - An innovative idea or system that makes life easier and/or reduces the amount of human effort required to complete a task. 2. Definition: - Next, the whole system needs to be designed, including what it will do under all possible sets of input conditions. This definition is perhaps the most critical part, as any error here will affect the working of whole system. I. I/O Considerations: -.

List and describe various features of electronic systems.List and .pdf

info824691

Assignment 3 TCSS 143 Programming Assignment 3 Due: see canvas, by 11:55pm (submitted electronically). NOTE: Be sure to adhere to the University’s Policy on Academic Integrity as discussed in class. Programming assignments are to be written individually and submitted programs must be the result of your own efforts. Any suspicion of academic integrity violation will be dealt with accordingly Purpose: The purpose of this programming project is to apply concepts of Object-Oriented Programming and work with Recursion. There are 2 problems that need to be solved as part of this assignment. Program compiles 15 Points Documentation Java Docs for Problem 1 10 Points Process Problem 1 50 Points o Fields, Constructor, Methods (Movie.java) 15 Points o Handling Exceptions 10 Points o Test.java implementation 15 Points o Output 10 Points Problem 2 25 Points o Practice-It Problems Total 100 Points Assignment 3 Problem 1: Movie ADT You have been hired to an inventory system for movies that will allow the user to add, remove, and search for movies in the collection. In this exercise, you will complete and test an initial implementation of the Movie ADT that will be the heart of this inventory system. Step 1: Movie.java Create a class file Movie.java based on the description provided in the class diagram given below: Step 2: Implementation of the compareTo() method We have discussed the Comparable interface in class and we have seen some methods in the Collection interface and Collections class that use the compareTo() method. What would be a good method for determining whether one movie is less than, equal to, or greater than another movie? This is called the “Natural” ordering for the movie ADT. Implement your compareTo() method. Step 3: Exception Handling • The constructor should throw a java.lang.NullPointerException if title is null and a java.lang.IllegalArgumentException if year is negative. • equals() & compareTo() methods should throw a java.lang.NullPointerException if its argument is null. Step 4: Test.java A driver file Test.java has been provided with the Assignment. You will modify the driver program to perform the following steps: 1. Instantiate eight objects of type Movie and add them to the movie List. 2. Print out the unsorted list of movies. 3. Sort the list of movies using Collections.sort(). 4. Print out the sorted list of movies. 5. Search for a particular movie in the list using Collections.binarySearch() 6. Test your equals method. Assignment 3 Problem 2: Based on Practice-It Do the following exercises from Practice-It: • University of Washington CSE 143 (CS2) (Under) Recursion Tracing: a. mystery2 b. mystery3 c. mystery7 • University of Washington CSE 143 (CS2) (Under) Recursion: a. factorial b. writeChars c. stutter d. countToB.

Assignment 3 TCSS 143 Programming Assignment 3 .docx

ursabrooks36447

Cisco project ideas

VIT University

Network security projects

tcpipguru

Running head: NETWORK DESIGN PROPOSAL NETWORK DESIGN PROPOSAL15 NETWORK DESIGN PROPOSAL Student’s Name Professor’s Name UNIVERSITY OF MARYLAND Course Title Physical Network Design 1. Network Topology The purpose of this paper is to present a proposal of network architectural system; it explains analysis of a detailed network arrangement with the networking infrastructure. This paper includes the study of physical topology according to the business needs for establishing a network layout such as premises of campus of “University of Maryland” is connected along with the departments, library, rooms, laboratory, and grounds with the network connections. The data must be secured for the campus teachers as well as students through all network arrangements. The new network system should also take into consideration the future development of the campus with more labs, library, computer, classrooms other offices in the building locations. So the proposed layout of the network layout is worthwhile for University (Stewart, 2008). A general layout of a network that is topological with a protected system linking within the campus of the college: Business Needs The Cisco Enterprise Specialist of the IT Business association is for IT professionals to help them provide their business with innovation to improve their business output. The IT experts will groom their skills as part of this association such as: · Assessing the technological alternatives within a business connection · Evaluating and meeting the business needs. · Behaving and talking courteously with business peers. · Getting knowledge about an aggregate expense of proprietorship and an arrival on speculation IT arrangement's (Eernet, (n.d)). Proposed topology It is important to keep the system documentation brief and comprehensive. Initially, at the establishment of a system, the system documentation is generally concise, but when the system changes or develops more, the documentation needs to be redesign. System topology maps usually present a unique floor arrangement. When there are changes in the floor arrangements, the necessary steps are taken to change the Diagrams or redline are created to demonstrate the alterations. The changed layout is organized and well presented. An outline that is as-assembled represents how actually a system was created, which can be further altered. It is guaranteed that the existing records reflect the all systems topology changes and arrangement of the as-manufactured floor. (Cisco.com) Justification for proposed network topology The Cisco Services – is a global level organization having more than 9,500 workers in more than 120 countries with more than 380 locations – Cisco Enterprise Architecture Services has a trustworthy public image due to best practices, industry based technological developments, and brilliance. Cisco maintains various network emergency response vehicles (NERV)’s that are deployed by the Cisco employees in case of natural disa ...

Running head NETWORK DESIGN PROPOSALNETWORK DESIGN PROPOSAL.docx

toltonkendal

PLEASE READ ALL REQUIREMENTS BEFORE SUBMITTING A BID PLEASE Software-defined networking (SDN) and intent-based networking (IBN) offer an ability to revolutionize the modern network architecture. Both of these concepts are relatively new, and your chief technology officer (CTO) has only heard them in passing. In fact, she pawned them off as the new “marketing fad” dressed up as a new concept. Since you have researched both technologies, you understand this is not a fad. When used in combination with virtualization and cloud computing, you know SDN and IBN could revolutionize how the organization operates, providing for reduced costs, efficiency, better management of the network assets, and security. However, you need to develop a white paper for the Caduceus CTO to highlight these benefits. Given the CTO has only heard the term in passing, you must describe in this white paper, the SDN and IBN concepts, their benefits, and what it would take for the organization to implement. In your white paper, use additional sources of information but also describe the concept in layman’s terms. Use visuals where appropriate. Describe how an SDN/IBN architecture would look different than network architectures we have traditionally deployed. Compare and contrast the network architectures and discuss the pros and cons of each. Use the Company Highlights below when developing your paper. The paper should include the following sections: · introduction to software-defined networking (SDN) (discussed in Week 3) · introduction to intent-based networking (IBN) (discussed in Week 4) · discussion on how virtualizing the desktop and now back-end infrastructure are complementary and related · discussion of how SDN and IBN are related Company Highlights ● The organization currently maintains 2,000 Microsoft Windows desktop computers for the workforce. As you recall, these desktop computers were about to be refreshed. The organization is currently considering the Dell Optiplex series. Specifically, each computer would have a Intel Core i5 processor, run Microsoft Windows 10, contain 8GB DDR4 RAM, and have a 256GB solid state drive. The rough estimate for each PC is $1,250, which equates to a $2,500,000 upgrade cost to the organization. ● Microsoft Office runs on each of these computers. The license fee for each computer is $150, which equates to a $300,000 outlay. The organization typically upgrades all PCs with the latest version of Microsoft Office when it is released. ● The organization used multiples instances of Oracle Database. These databases are distributed across 10 Dell PowerEdge servers. These servers cost a minimum of $2,159 each, for a total cost of $21,580. ● The organization maintains an additional 20 Dell PowerEdge servers for a variety of reasons to include email, file backup, remote access, etc. The total cost to refresh each of these servers is $3,000 for a total cost of $60,000. ● The organization maintains various network ...

PLEASE READ ALL REQUIREMENTS BEFORE SUBMITTING A BID PLEASE

velmakostizy

Cis 175/tutorialoutlet

Patmorez

CMIT 320 FINAL PROJECT NETWORK SECURITY.

HamesKellor

Cisco Connect 2018 Thailand - Data center transformation emerging trends and ...

NetworkCollaborators

CMIT 320 FINAL PROJECT. NETWORK SECURITY

HamesKellor

Similar to Intrusion Detection Systems Objectives In this lab, st.docx (20)

01-01-2017 This section will lay out the implementation plan o.docx

Isset Presentation @ EECI2009

Cis 175 Enthusiastic Study / snaptutorial.com

Cis 175 Success Begins / snaptutorial.com

Network Design for a company

Assignment ContentAfter reviewing your latest submission, the .docx

Cis 534 Technology levels--snaptutorial.com

Cis 534 Enthusiastic Study / snaptutorial.com

181472589 basis project report

Documentation

List and describe various features of electronic systems.List and .pdf

Assignment 3 TCSS 143 Programming Assignment 3 .docx

Cisco project ideas

Network security projects

Running head NETWORK DESIGN PROPOSALNETWORK DESIGN PROPOSAL.docx

PLEASE READ ALL REQUIREMENTS BEFORE SUBMITTING A BID PLEASE

Cis 175/tutorialoutlet

CMIT 320 FINAL PROJECT NETWORK SECURITY.

Cisco Connect 2018 Thailand - Data center transformation emerging trends and ...

CMIT 320 FINAL PROJECT. NETWORK SECURITY

More from doylymaura

Inventory Management Homework Set You work in the administration of a major hospital. One of your tasks is the scheduling of one of the operating rooms in the hospital. The room is used for a specific elective surgery. You allocate a certain amount of time for a surgery; if the actual duration of the surgery exceeds the allocated time, the surgery scheduled next has to start later, and this usually results in overtime at the end of the day where surgery personnel have to stay late into the evening hours. If the actual duration of the surgery is less than the allocated time, the operating rooms remains idle until the next scheduled surgery, since the required resources for the surgery to start (staff, surgeon, equipment, patient) do not become available earlier. You currently allocate 90 minutes for each surgery (from the beginning until the room is ready for the next patient). However, surgeons and personnel have voiced their opinion that they believe this is not enough time – too often do they run over, and too often do they have to stay late to resolve schedule overruns. The higher levels of the administration agree, since overtime work is generally associated with higher costs as well as possibly worse patient outcomes. You decide to manage this process more rigorously, and download data on 200 completed surgeries that contains information on the actual durations of the surgeries (beginning until the room is ready again), as well as some data on which surgery team was involved, and some patient specific data (Body Mass Index, or BMI of patient), see Surgery Data.xls. Question 1 : Your higher level managers in the hospital tell you that surgeries should finish within the allocated time 99% of all times. Calculate the amount of time you should allocate per surgery to make that happen. How much safety buffer is included in this number? ( Note that the safety buffer is the difference between your allocated time, and the time it would take to complete the surgery on average ) Question 2 : You try to understand the precise cost factors associated with allocating too much and too little time to a surgery. While opinions diverge, most of your colleagues tell you that a minute of being overtime is about 3 times as bad as a minute of finishing early. Can you use this information to revise how much total time (and buffer time) you would allocate to a surgery? Question 3 : One of the surgery teams (let’s leave it unspecified which one!) likes to schedule surgeries in continuous blocks. They tell you that they can handle three surgeries in a row; according to them, an advantage would be that all resources to start the next surgery early, in case they are done early, would be available. How much time would you allocate to such a block of three surgeries in a row (under the cost information from Q2)? Compare this time to the time you would normally allocate to three surgeries made by three different teams. How much buffer time can you save .

Inventory Management Homework Set You work in the administrat.docx

doylymaura

Inventory Costing Methods" Please respond to the following: Use the Internet to research the annual report of at least three (3) merchandising companies. Determine the costing method (Last in First Out [LIFO], First in First out [FIFO], and weighted average) that is used to record inventory. Next, watch C. Pence’s video: Watch Video http://www.youtube.com/watch?v=UGs1EXalrZo Duration: (12:05) Identify the primary benefits in using the costing method (LIFO, FIFO, and weighted average) that is used to record inventory. Explain at least three (3) reasons that would lead each of your chosen companies to switch to a different costing method. .

Inventory Costing Methods Please respond to the followingUse.docx

doylymaura

"Inventory Costing Methods" Please respond to the following: Use the Internet to research the annual report of at least three (3) merchandising companies. Determine the costing method (Last In First Out [LIFO], First In First Out [FIFO], and weighted average) that is used to record inventory. Next, watch C. Pence’s video: Watch Video Accounting Lecture 08 Part I - LIFO, FIFO & Average Cost Duration: (12:05) User: accountingtutor - Added: 11/12/10 Identify the primary benefits in using the costing method (LIFO, FIFO, and weighted average) that is used to record inventory. Explain at least three (3) reasons that would lead each of your chosen companies to switch to a different costing method. Reply Quote .

Inventory Costing Methods Please respond to the followingUse th.docx

doylymaura

Introduction Understanding culture is essential for effectively examining how people and society operate and interact with one another. The Prompt Respond to the following question in the discussion forum for this module. Beauty is an important value (whether we like it or not) in our society today. Why do you think some Americans obsess so much about attractiveness? To what lengths will some Americans go to either become or stay beautiful? What do you think about some Americans' preoccupation with beauty? Resources Go to The Beauty Myth for interesting information on female beauty. .

Introduction Understanding culture is essential for effectively ex.docx

doylymaura

Inventory Management Homework Set You work in the administration of a major hospital in the Twin Cities. One of your tasks is the scheduling of one of the operating rooms in the hospital. The room is used for a specific elective surgery. You allocate a certain amount of time for a surgery; if the actual duration of the surgery exceeds the allocated time, the surgery scheduled next has to start later, and this usually results in overtime at the end of the day where surgery personnel have to stay late into the evening hours. If the actual duration of the surgery is less than the allocated time, the operating rooms remains idle until the next scheduled surgery, since the required resources for the surgery to start (staff, surgeon, equipment, patient) do not become available earlier. You currently allocate 90 minutes for each surgery (from the beginning until the room is ready for the next patient). However, surgeons and personnel have voiced their opinion that they believe this is not enough time – too often do they run over, and too often do they have to stay late to resolve schedule overruns. The higher levels of the administration agree, since overtime work is generally associated with higher costs as well as possibly worse patient outcomes. You decide to manage this process more rigorously, and download data on 200 completed surgeries that contains information on the actual durations of the surgeries (beginning until the room is ready again), as well as some data on which surgery team was involved, and some patient specific data (Body Mass Index, or BMI of patient), see Surgery Data.xls. Question 1 : Your higher level managers in the hospital tell you that surgeries should finish within the allocated time 99% of all times. Calculate the amount of time you should allocate per surgery to make that happen. How much safety buffer is included in this number? ( Note that the safety buffer is the difference between your allocated time, and the time it would take to complete the surgery on average ) Question 2 : You try to understand the precise cost factors associated with allocating too much and too little time to a surgery. While opinions diverge, most of your colleagues tell you that a minute of being overtime is about 3 times as bad as a minute of finishing early. Can you use this information to revise how much total time (and buffer time) you would allocate to a surgery? Question 3 : One of the surgery teams (let’s leave it unspecified which one!) likes to schedule surgeries in continuous blocks. They tell you that they can handle three surgeries in a row; according to them, an advantage would be that all resources to start the next surgery early, in case they are done early, would be available. How much time would you allocate to such a block of three surgeries in a row (under the cost information from Q2)? Compare this time to the time you would normally allocate to three surgeries made by three different teams. How much.

Inventory Management Homework Set You work in the .docx

doylymaura

Introduction I am 43 years old and married with three children. My income is $98,000 annually. The variables included: SE- Income, SE – Marital status, SE family size, and USD food. Variable/Data Set Description Variable Type Variable 1 “Income” Annual Income (USD) Quantitative Variable 2 “Age” Head of Household Age Qualitative Variable 3 “Size of family” No. of people in household Quantitative Income is necessary for basic needs for the survival of the family. Numerical Summary For income, the median is the measure of central tendency, the variable is quantitative. If any outliers or if the data is not distributed normally, the median is the best measure for central tendency. .

IntroductionI am 43 years old and married with three childre.docx

doylymaura

Introduction Throughout this course, the breadth and depth of your knowledge with regard to aspects of culture and diversity—race, economic level, social class, family background, language, gender, sexual orientation, abilities—has grown. However, it is the role of professionals in the early childhood field to not only understand and respect the diversity of children and families with whom they work, but also to help build a community of people who recognize and respect each others' cultures and diversity as well. This week, your study will focus on powerful learning resources that offer information, insights, and practical advice about creating such a community through multicultural education. You will consider the role of significant adults in children's lives and contemplate the influence that you can have as a professional working to help foster understanding and counteract bias. And you will have the opportunity to reflect on what you have learned in this course—the attitudes and perceptions you had when you began, the insights and knowledge you have gained, and the ways you will use what you have learned in your work as an early childhood professional. Learning Objectives Students will: Reflect on what they have learned and experienced in the course, explain new insights, and apply new knowledge Reflection Reflective Journal: Final Course Entry Throughout this course, you have completed journal entries that were both introspective and autobiographical in nature. Reread your entries for Weeks 1–4. Reflect on how well you were able to describe who you are and the ways that you are growing with respect to your understanding of race, social class, gender, sexual orientation, cultural and linguistic diversity, and abilities and disabilities. Your fifth and final journal entry asks you to reflect on the personal and professional insights you have gained throughout the course and respond to at least two of the following questions: How will this greater awareness of yourself and your strengths, challenges, and comfort levels influence your life and help you relate to and work with children and families of all backgrounds, cultures, influences, preferences, and readiness levels? What kinds of professional development will you seek to help you continue to grow in your personal and professional knowledge of issues related to race, social class, gender, sexual orientation, culture, language, and abilities and disabilities? What considerations will you need to keep in mind during your ongoing quest to understand children as unique individuals and foster not only their healthy development but also take an active part in creating caring, responsive, and collaborative communities in your future professional setting? Assignment length: 1–2 pages .

IntroductionThroughout this course, the breadth and depth of you.docx

doylymaura

Introduction Pg. 2 The Arrival Of Violence As A Key Component Of The Action Film Pg. 3 Racial Stereotypes As An Essential Part Of The Action Movie Formula Pg. 5 Concerning Violence: The Role Of Discourse In Stereotyping People Of Colour Pg. 8 James Bond And The Changing Face Of Racial Stereotypes Pg. 10 Frantz Fanon: Capitalism, Colonialism And Language As A Tool Of Oppression Pg. 12 Toward The Cinematic Revolution: The Fight For Independence Pg. 14 Conclusion Pg. 17 Bibliography Pg. 18 .

IntroductionPg. 2The Arrival Of Violence As A Key Component Of T.docx

doylymaura

Introduction Patients usually go through a lot and in most instances; other people influence their decisions in all aspects. They are forced to follow certain aspects even though they themselves are against them. This is because they are sick and as thus depend on the help of others in order to regain their healthy. The scenario Ella has been sick and as thus has been requiring medical help. She wishes to stick to the alternative and complementary medical practices but is coerced to follow the mainstream medical advice. Her husband, who insists to make decision on her behalf, as he is the head of the family, opts for traditional practices. There are alternatives for her care as she may be discharged home to receive treatment and care from there.However; the family members at home also have individual problems. The son is an alcoholic while the daughter has diabetis.The grandson has drugs problems while the grand daughter is bipolar and also has drug problems. The daughter in law is also stressed because of the medical issues in the family which include nephew with leukemia, brother who has HIV and her father’s view that they are all crazy. Ella is expected by the doctor to go home and receive care from there. The family members are thus expected to provide her with all the care needed in order to enhance her recovery. The question is, keeping in mind the current situation with family members; will she be able to recover adequately? Cultural Aspects and alternative treatments Ella’s husband wants the family traditions to be followed in her medications. Assessment of therapy process and its outcome usually vary across cultures. A cure in a system may be regarded as a failure in another system. This makes assessment of success or failure a daunting task. The biomedical perspective of traditional systems is that they usually lack models necessary for chronic disorders. In a scenario, a medicine man may say that their therapy works as their patients never come back. A physician may say that their therapy works as their patients do come back. Physicians view this as success to an ongoing process while the medicine mans` cure does not appear to need any further therapy. These thoughts reflect the different expectations of people on illnesses and therapy. These methods are based on various expectations of patients and their families. (Jennifer Christine Mills Niemeyer, 2010) The current scenario is complicated further as the husband opts for traditional mechanisms. He wants a therapy that will adequately provide a permanent cure and relief. The husband challenging the use of biomedical to traditional poses a great task to physicians and healers of any tradition. This makes the patients to struggle and reject with the chronic illness. The physician should thus recognize the psychosocial problems and try to analyze the complexities of the cross-cultural settings of caring for the patient. This is to ensure positive progress of the patient’s .

IntroductionPatients usually go through a lot and in most inst.docx

doylymaura

INTRODUCTION TO TERRORISM ONLY ONE PARAGRAPH FOR THIS DISCUSSION ONLY As discussed in the previous studies by Combs, apply your knowledge of the research on the internationalization of terrorism and the funding sources. Please respond to all of the following prompts: Individually research the internationalization of terrorism in Europe and the terrorist networks of the Middle East. Report your findings. Compare and contrast the networks by thoroughly explaining their similarities and differences. Include the funding source for each group. .

INTRODUCTION TO TERRORISMONLY ONE PARAGRAPH FOR THIS DISCUSSION ON.docx

doylymaura

Introduction In this module, you have learned about the intentional planning of environments for mobile and non-mobile infants as well as toddlers and two-year-olds. Much of the discussion concerned intentional indoor environments. The Assignment Review what each of these age groups seeks developmentally. From there, you will synthesize the information about indoor environments, including the perspective that outdoor environments are an extension of the indoor environment, to discuss opportunities in the outdoor environment for mobile and non-mobile infants, toddlers, and twos. For example, in the lecture, you learned that non-mobile infants watch and listen to the world around them. One thing a teacher can do is to seek out opportunities for children to watch whirligigs spinning or hear a wind chime ringing as the wind blows. You will come up with your own (10) ideas for opportunities for each age group.This table was adapted from Creative Curriculum for Infants, Toddlers, and TwosNon-mobile infantsMobile InfantsToddlersTwo-year-oldsExample: Notice, looking at, and listening to what is around themExample: Crawl, pull to standing, cruise, and walkExample: Increase social interactionsExample: Engage in more complex social interactions You will use the table to provide an outdoor learning experience, opportunity, or material for each age group. An example has been provided in the introduction. You will provide one per age group (non-mobile infant, mobile infant, toddler, and two-year-old). As you contemplate each age group, you must also keep in mind any child care rules, best practices, and other considerations impacting environments for young children. You should cite your sources to support your activity. You will write a summary of each activity for each age group and justify how your activity is developmentally appropriate and supports early learning. You will cite your sources. Finally, you will submit the chart above (copy and paste it into a word document and the summary of each activity for each age group. Grading Criteria Module 8 Intentional Outdoor Expereinces for Young Children Assignment Rubric.docx Module 8 Intentional Outdoor Expereinces for Young Children Assignment Rubric.docx - Alternative Formats To Submit Using an instructor-approved word processor (for example, Microsoft Word), save the document with a filename that includes your last name and first initial and the assignment title. Example: Brown C Module 2 Essay. Submit the document through the assignment link. .

IntroductionIn this module, you have learned about the intention.docx

doylymaura

IntroductionBody part (literature review) which includesT.docx

doylymaura

Introduction to Sociology All work must be original in APA Format, 2 pages 500 words or more. The title page and reference page do not count. Text Book Reference: References Macionis, J. J. (2011). Society: The basics (11th ed.). Upper Saddle River, NJ: Prentice Hall. Unit III Project Portfolio Project 1: For this assignment, you are to select ONE (1) of the following Case Studies for the project. A Case Study is an assignment in which a situation (a case) is provided and is analyzed through a series of questions. You will need to answer these questions as you would a short answer question or essay question (depending on the length of your response) for an assessment. The questions and subsequent answers should be placed within a word document with proper headings, title page, and reference list (if outside sources are used). Use APA style formatting for this assignment. The Case Study is the first entry in what is to be a portfolio for this course. There are a total of four portfolio assignments, with the other assignments meant to test your ability to apply the information you learned to the environment around you. This skill is important as it will allow you to perceive the changing world around you and apply the concepts of sociology in your everyday life. The ability to apply these concepts to the world around you can also be transferred to other courses as well. Case 1: John Rommel was born in 1955 to a lower class family in New York. His father had immigrated over to the United States from Germany prior to the rise of Hitler in 1933. He desired to show pride in his new country, so he worked hard at the docks to earn a living for his family. While he was never made much, he always stressed pride in his work and obeyed the law. He believed this was a firm foundation for becoming successful. John always showed a bright mind and highly intuitive nature, but he never showed any desire for schooling. He saw society as an unfair, unforgiving system that repressed those of lower social status. John was not a violent person; he considered himself very honorable, but he did not have a desire to work like his father did, earning low wages for hours of tedious work to support his family. Instead, he opted for more illegal endeavors—gambling, stealing, and even dabbling in organized crime. However, he never told his father because he did not want to disrespect his family. When he turned 17, he became a drug-runner for the Gambino family because a couple of his close “brothers” had become involved in the business as well. Soon John became involved with more than just drug running; he began to assist the family with offering “protective services” to different shops and businesses in Brooklyn’s lower east side. Should the businesses miss a payment or refuse their help, he would instigate certain actions against the business to cause severe damage, enough to ensure the business owner would seek their protection from then on. Eventually, John’s .

Introduction to SociologyAll work must be original in APA Format, .docx

doylymaura

Introduction to Sociology Unit 5 Project Textbook Help : Macionis, J. J. (2011). Society: The basics (11th ed.). Upper Saddle River, NJ: Prentice Hall. Chapter 11 Race and Ethnicity & 13 Family and Religion Portfolio Project 3: The third portfolio entry requires the construction of a document that reflects the information you have learned in Unit V. The assignment will also test your ability to think critically about the concepts within the unit. This portfolio entry should be in one word document with proper headings for each section. This project allows you to develop some interviewing skills, generate tables, create a timeline, and write a debate. These different mini projects allow you to think outside of the box of the traditional assignment and assessment format, stretching your academic capabilities and applying them to the sociology discipline. 1. Ask five people how they would define racism, religion, and family, and then summarize the definitions. Identify the similarities and differences in the definitions. Provide your own definitions of each and how they relate to each other. a. You can use any means you want to interview people. Social media (Facebook, Twitter, etc.), email, or personal interviews are all acceptable. 2. Generate a table with a list of the different patterns of interaction between minority and majority groups. The table should have three columns: a. One column for the models b. One column providing three facts about each model c. One column providing two different examples for each model 3. Develop a K-W-L table for each of the racial/ethnic groups in the United States. Create three columns for each table with the following categories: What I KNOW (K), what I WANT to know (W), and what I LEARNED (L). Complete the “K” and “W” sections, listing at least three things you know and three things that you want to know about each of the racial/ethnic groups in the United States. Then, perform research on the different associated cultures, and list three things you learned about the different cultures, and fill them in the “L” section. 4. Create a timeline listing the different stages of family life. Make note of any events, significant milestones, or problems that may occur. 5. Argue both sides (supporting and rejecting) the following statement in one to two paragraphs: The religions in the world will never get along because they are too different. .

Introduction to Sociology Unit 5 ProjectTextbook Help Macio.docx

doylymaura

INTRODUCTION TO CORRECTIONS ONLY ONE PARAGRAPH AND A HALF Instructional Objectives for this activity: Compare differences between jail and prison programming. Participate in the teamwork activity by entering the Teamwork area in your online course and completing the following: Individual Portion: Identify a program in a specific prison system of your choice. It is recommended that each team chose a specific type of program ( sex offender, substance abuse, etc.). Once you have chosen a program, define the program, and discuss the effectiveness of the program. .

INTRODUCTION TO CORRECTIONS ONLY ONE PARAGRAPH AND A HALFInstruct.docx

doylymaura

Introduction : One or two pages to introduce the issue, group, or problem you will be working on. Brief literature review : What have others written about this group or issue? What will your analysis contribute to that discourse? Asking a librarian for help on finding any prior studies is highly recommended. Methodology : A few pages describing your methodology. How did you find your group or your informants, or your issue? What method did you use to collect your information – participant observation, interviews, surveys? Data presentation : page discussing the results of your observations-what people said, including pull quotes or excerpts from interviews or surveys. Analysis : page explanation of the problem. Analyze how your observations compare and/or relate to the original problem, issue or group you studied. Summary : a short conclusion wrapping up the overall experience, how it affected your perceptions of the subject, and what it added to our body of knowledge on the topic. .

Introduction One or two pages to introduce the issue, group, or.docx

doylymaura

Introduction on Islamic philosophy: In order to write about evolution and I believe, I should give a descriptive introduction about the Islamic philosophy. Verses of the Quran touch upon the theory of evolution and the Tafsir: I will put the Qur’anic Verses that touch evolution and its Tafsir which is the interruption of Quran where each Islamic theologian has his own way to interpret Quran. The Islamic Hadith on evolution: The hadith is the prophet’s collective saying where there are some Hadiths that can be discussed under the umbrella of the evolution. Evolution and the Islamic Philosophers and scientists: During what it is called the golden Age of the Islamic civilizational era there was some remarkable scientists, philosophers and scholars who theorized some kinds of ideas about evolution. I will bring those people and their ideas to a kind of forefront in this paper writing. Conclusion: In order to conclude, I will restate briefly the topics that I coved in this paper. .

Introduction on Islamic philosophy In order to write about evolut.docx

doylymaura

Introduction to Assignment : This assignment contains a number of sections. Each section contains a reading followed by a practice exercise. To complete the assignment, you need to respond to all the practice exercises in the assignment. Directions : Type out the answers to all the practice exercises on a separate sheet of paper. This sheet of paper or document will be known as the “Answer Sheet for Grammar Assignment 2” Be sure to number your answer sheet in the same way the practice exercises are numbered. For this assignment, your answer sheet should be numbered from 1 through 56. Also, be aware that for some of the practice exercises you have to rewrite the sentences to complete the practice, and for some of the practice exercise you do not have to rewrite the sentences to complete the practice. Where and How to Submit Assignment : When you complete the assignment, you will submit it either by uploading it as an attachment or by cutting and pasting the assignment from your word processing program into the textbox. Both of these options appear at the bottom of the assignment page. If you cut and paste your assignment into the textbox, be sure to do so by choosing the option to “Paste from Word.” Using this option will maintain your original formatting. To access the “Paste from Word” option, click on the three dots that appear in the box in the far right hand corner of the textbox. After you do this, several more buttons should appear. Once these buttons appear, click on the arrow beside the picture of the clipboard in order to see the option “Paste from Word.” Click on this option and follow the directions provided. If you send the assignment as an attachment, name the attachment in the following way: GA2LastName. For example, if I were submitting the assignment as an attachment, I would name the attachment GA2Tolbert. If you submit the exercise as an attachment, be sure to save it and attach it as a Rich Text Format (RTF) since the majority of computers can open an RTF attachment. If you submit an assignment as an attachment that my computer will not open, I will return the assignment to you ungraded. The assignment will remain ungraded until you submit it in a form my computer will open . When to Submit Your Assignment: Grammar Assignment 2 is due by 11:59 Eastern Standard Time on Sunday, November 2, 2014. How to Format Assignmen t: Title : Center the following information at the top of the completed exercise: Answer Sheet for Grammar Assignment 2 Font : 12pt Times New Roman Spacing : Double Spacing If you have any questions about how to do Grammar Assignment 2 or how to submit it, be sure to let me know. Section 1: Past Tense of Regular Verbs [The following information about verb tenses is taken from p. 72 of Writing for Success .] Suppose you must give an oral presentation about what you did last summer. How do you make it clear that you are talking about the past and not about the present or the future? Using the c.

Introduction to Assignment This assignment contains a number of s.docx

doylymaura

Introduction to Assignment: This assignment contains a number of sections. Each section contains a reading followed by a practice exercise. To complete the assignment, you need to respond to all the practice exercises in the assignment. Directions: Type out the answers to all the practice exercises on a separate sheet of paper. This sheet of paper or document will be known as the “Answer Sheet for Grammar Assignment 2” Be sure to number your answer sheet in the same way the practice exercises are numbered. For this assignment, your answer sheet should be numbered from 1 through 56. Also, be aware that for some of the practice exercises you have to rewrite the sentences to complete the practice, and for some of the practice exercise you do not have to rewrite the sentences to complete the practice. Where and How to Submit Assignment: When you complete the assignment, you will submit it either by uploading it as an attachment or by cutting and pasting the assignment from your word processing program into the textbox. Both of these options appear at the bottom of the assignment page. If you cut and paste your assignment into the textbox, be sure to do so by choosing the option to “Paste from Word.” Using this option will maintain your original formatting. To access the “Paste from Word” option, click on the three dots that appear in the box in the far right hand corner of the textbox. After you do this, several more buttons should appear. Once these buttons appear, click on the arrow beside the picture of the clipboard in order to see the option “Paste from Word.” Click on this option and follow the directions provided. If you send the assignment as an attachment, name the attachment in the following way: GA2LastName. For example, if I were submitting the assignment as an attachment, I would name the attachment GA2Tolbert. If you submit the exercise as an attachment, be sure to save it and attach it as a Rich Text Format (RTF) since the majority of computers can open an RTF attachment. If you submit an assignment as an attachment that my computer will not open, I will return the assignment to you ungraded. The assignment will remain ungraded until you submit it in a form my computer will open. When to Submit Your Assignment: Grammar Assignment 2 is due by 11:59 Eastern Standard Time on Sunday, November 2, 2014. How to Format Assignment: Title: Center the following information at the top of the completed exercise: Answer Sheet for Grammar Assignment 2 Font: 12pt Times New Roman Spacing: Double Spacing If you have any questions about how to do Grammar Assignment 2 or how to submit it, be sure to let me know. Section 1: Past Tense of Regular Verbs [The following information about verb tenses is taken from p. 72 of Writing for Success.] Suppose you must give an oral presentation about what you did last summer. How do you make it clear that you are talking about the past and not about the present or the future? Using the correct verb tense can hel.

Introduction to Assignment This assignment contains a number .docx

doylymaura

Introduce us to a person (historical or fictional) with whom you are.docx

doylymaura

More from doylymaura (20)