Miresme dulci de flori mă-mbată şi mă alintă gînduri blînde... Ce iertător şi bun ţi-e gîndul, în preajma florilor plămînd...
<ul><li>Satul Corneşti este aşezat astăzi pe valea a două dealuri, spre vest de oraşul Iaşi, la distanţa de 10 km, depărta...
<ul><li>În acest sat a fost zidită din temelie biserica «  Buna vestire », în anul 1833, din piatră şi cărămidă, de către ...
DIMITRIE ANGHEL POETUL FLORILOR POETUL UITAT (1872-1914)
CASA PĂRINTEASCĂ <ul><li>Conacul datează din secolul al XIX-lea, fiind construit în anul 1840 de către familia boierească ...
Muzeul <ul><li>În anul 1971, a fost amenajat un muzeu ce aparţinea de Muzeul Literaturii Române din Iaşi.  Aici  erau expu...
<ul><li>S ensibilitate a  aleasă i-a fost transmisă de mama sa, Erifilia, născută la Constantinopol, la 10 octombrie 1845 ...
<ul><li>Debutează cu poezii în revista Contemporanul (1890), colaborând apoi, cu poezie şi publicistică, la  Adevărul ,  A...
<ul><li>Casnicia  lui Şt.O.Iosif cu Natalia Negru , deşi fericită la început, a alunecat treptat-treptat către un şir de n...
Fire visătoare şi boemă,  Iosif  nu fusese, însă, ceea ce îşi dorise Natalia Negru pentru propria-i căsnicie: un tip aşeza...
PORTRETE DE FAMILIE
 
 
S -a stins la Iaşi, la 13 noiembrie 1914
Atîtea amintiri uitate cad abătute de-o mireasmă : Parcă-mi arunc-o floare roşă o mînă albă de fantasmă, Ş-un chip bălan l...
Upcoming SlideShare
Loading in …5
×

Scoala"Dimitrie Anghel"

518 views

Published on

O farama din istoria scolii noastre

Published in: Education
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
518
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
0
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide
  • Custom animation effects: Grayscale picture fades to full color (Basic) To reproduce the grayscale picture effects on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . On the Insert tab , in the Illustrations group, click Picture . In the Insert Picture dialog box, select a color picture and then click Insert . On the slide, select the picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 4.15” and the Width box is set to 6.25” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Under Picture Tools , on the Format tab, in the Adjust group, click Recolor , and then under Color Modes click Grayscale (first option from the left). Right-click the grayscale picture, and then click Format Picture . In the Format Picture dialog box, in the left pane, click Shadow . In the Shadow pane, click the button next to Presets , and then under Outer click Offset Diagonal Top Right (third row, first option on the left). On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Middle . Click Align Center . To reproduce the full-color picture effects on this slide, do the following: Select the grayscale picture. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Select the duplicate picture. Under Picture Tools , on the Format tab, in the Adjust group, click Recolor , and then under No Recolor click No Recolor . On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Middle . Click Align Center . To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation . On the slide, select the full-color picture, and then do the following in the Custom Animation task pane: Click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Subtle , click Fade , and then click OK . Under Modify: Fade , in the Start list, select With Previous . Under Modify: Fade , in the Speed list, select Slow. Click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Subtle , click Expand , and then click OK . Under Modify: Expand , in the Start list, select With Previous . Under Modify: Expand , in the Speed list, select Fast . To reproduce the background effects on this slide, do the following: On the Design tab, in the Background group, click Background Styles , and then click Style 8 (second row, fourth option from the left). ( Note : If this action is taken in a PowerPoint presentation containing more than one slide, the background style will be applied to all of the slides.)
  • Custom animation effects: Grayscale picture fades to full color (Basic) To reproduce the grayscale picture effects on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . On the Insert tab , in the Illustrations group, click Picture . In the Insert Picture dialog box, select a color picture and then click Insert . On the slide, select the picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 4.15” and the Width box is set to 6.25” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Under Picture Tools , on the Format tab, in the Adjust group, click Recolor , and then under Color Modes click Grayscale (first option from the left). Right-click the grayscale picture, and then click Format Picture . In the Format Picture dialog box, in the left pane, click Shadow . In the Shadow pane, click the button next to Presets , and then under Outer click Offset Diagonal Top Right (third row, first option on the left). On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Middle . Click Align Center . To reproduce the full-color picture effects on this slide, do the following: Select the grayscale picture. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Select the duplicate picture. Under Picture Tools , on the Format tab, in the Adjust group, click Recolor , and then under No Recolor click No Recolor . On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Middle . Click Align Center . To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation . On the slide, select the full-color picture, and then do the following in the Custom Animation task pane: Click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Subtle , click Fade , and then click OK . Under Modify: Fade , in the Start list, select With Previous . Under Modify: Fade , in the Speed list, select Slow. Click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Subtle , click Expand , and then click OK . Under Modify: Expand , in the Start list, select With Previous . Under Modify: Expand , in the Speed list, select Fast . To reproduce the background effects on this slide, do the following: On the Design tab, in the Background group, click Background Styles , and then click Style 8 (second row, fourth option from the left). ( Note : If this action is taken in a PowerPoint presentation containing more than one slide, the background style will be applied to all of the slides.)
  • Custom animation effects: faded zoom entrance and exit (Basic) To reproduce the picture effects on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . On the Insert tab , in the Illustrations group, click Picture . In the Insert Picture dialog box, select a picture, and then click Insert . On the slide, select the picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 5.5” and the Width box is set to 6.5” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Select the picture. Under Picture Tools , on the Format tab, in the Picture Styles group, click Picture Shape , and then under Rectangles click Rounded Rectangle (second option from the left). On the picture, drag the yellow diamond adjustment handle toward the corner to decrease the rounding on the corners of the rectangle. Under Picture Tools , on the Format tab, in the Picture Styles group, click Picture Effects , point to Shadow , and then under Outer click Offset Center (second row, second option from the left). To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation . On the slide, select the picture. In the Custom Animation task pane, click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Subtle , click Faded Zoom , and then click OK . Under Modify: Faded Zoom , in the Start list, select With Previous . Under Modify: Faded Zoom , in the Speed list, select Medium . Also in the Custom Animation task pane, click Add Effect , point to Exit , and then click More Effects . In the Add Exit Effect dialog box, under Subtle , click Faded Zoom , and then click OK . Under Modify: Faded Zoom , in the Start list, select On Click . Under Modify: Faded Zoom , in the Speed list, select Medium . To duplicate the animated picture effects on this slide, do the following: Select the first picture. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Select the second picture. Under Picture Tools , on the Format tab, in the Adjust group, click Change Picture . In the Insert Picture dialog box, select a picture, and then click Insert . Select the second picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 5.5” and the Width box is set to 6.5” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Select the second picture. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Select the third picture. Under Picture Tools , on the Format tab, in the Adjust group, click Change Picture . In the Insert Picture dialog box, select a picture, and then click Insert . Select the third picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 5.5” and the Width box is set to 6.5” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Middle . Click Align Center . In the Custom Animation task pane, select the sixth animation effect (faded zoom exit effect for the third picture). Click the arrow to the right of the effect, and then click Remove . To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background . In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Radial . Click the button next to Direction , and then click From Center (third option from the left). Under Gradient stops , click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops , customize the gradient stops as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 0% . Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 50% (second row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100% . Click the button next to Color , and then under Theme Colors click Black, Text 1 (first row, second option from the left).
  • Custom animation effects: sparkling picture (Basic) To reproduce the background effects on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . On the Design tab, in the Background group, click the arrow next to Background Styles , and then click Style 5 (second row, first option from the left). ( Note: If this action is taken in a PowerPoint presentation containing more than one slide, the background style will be applied to all of the slides.) To reproduce the picture effects on this slide, do the following: On the Insert tab, in the Illustration group, click Picture . In the Insert Picture dialog box, select a picture, and then click Insert . On the slide, select the picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 4.1” and the Width box is set to 6.7” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. On the Home tab, in the Drawing group, click the arrow under Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . Click Align Middle . Under Picture Tools , on the Format tab, in the bottom right corner of the Picture Styles group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets , under Inner click Inside Diagonal Top Right (first row, third option from the left), and then do the following: In the Transparency box, enter 21% . In the Blur box, enter 3 pt . In the Angle box, enter 315° . In the Distance box, enter 1 pt . To reproduce the rectangle effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes , and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools , on the Format tab, in the Size group, do the following: In the Shape Height box, enter 5.47” . In the Shape Width box, enter 7.33” . On the Home tab, in the Drawing group, click the arrow next to Shape Fill , and then under Theme Colors click White, Background 1 (first row, first option from the left). On the Home tab, in the Drawing group, click the arrow next to Shape Outline , and then click No Outline . On the Home tab, in the Drawing group, click Shape Effects , point to Preset , and then under Presets select Preset 8 (second row, fourth option from the left). On the Home tab, in the Drawing group, click Arrange , and then do the following: Point to Align , and then click Align to Slide . Point to Align , and then click Align Center . Point to Align , and then click Align Middle . Click Send to Back . To reproduce the first star on this slide, do the following: On the Home tab, in the Drawing group, click Shapes , and then under Stars and Banners click 4-Point Star (first row, third option from the left). On the slide, drag to draw a four-point star. Under Drawing Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, do the following under Size and rotation : In the Height box, enter 0.69” . In the Width box, enter 0.69” . In the Rotation box, enter 15° . Select the four-point star, and then drag the yellow diamond adjustment handle to decrease the width of the star points. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Radial . Click the button next to Direction , and then click From Center (third option from the left). Under Gradient stops , click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops , customize the gradient stops that you added as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 0% . Click the button next to Color , and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 0% . Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100% . Click the button next to Color , and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 100% . Also in the Format Shape dialog box, in the left pane, click Line Color . In the Line Color pane, select No line . On the slide, drag the four-point star until it is centered on the top left corner of the rectangle. To reproduce the animation effects for the first star on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation . On the slide, select the four-point star. In the Custom Animation task pane, do the following: Click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Moderate , click Grow &amp; Turn , and then click OK . With the animation effect still selected, under Modify: Grow &amp; Turn , do the following: In the Start list, select With Previous . In the Speed list, select Very Fast . Click Add Effect , point to Exit , and then click More Effects . In the Add Exit Effect dialog box, under Moderate select Grow &amp; Turn . With the second animation effect still selected, under Modify: Grow &amp; Turn , do the following: In the Start list select With Previous . In the Speed list select Very Fast . Click the arrow to the right of the second animation effect, and then click Timing . In the Grow &amp; Turn dialog box, on the Timing tab, in the Delay box, enter 0.7 , and then click OK . To reproduce the second star with animation effects on this slide, do the following: On the slide, select the four-point star. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Select the second four-point star. Under Drawing Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, do the following under Size and rotation : In the Height box, enter 0.62” . In the Width box, enter 0.62” . Drag the second four-point star until it is centered on the top left corner of the picture. On the slide, select the second four-point star. In the Custom Animation task pane, do the following: Select the third animation effect (grow &amp; turn entrance effect for the second star). Click the arrow to the right of the effect, and then click Timing . In the Grow &amp; Turn dialog box, on the Timing tab, in the Delay box, enter 0.2 , and then click OK . Select the fourth animation effect (grow &amp; turn exit effect for the second star). Click the arrow to the right of the effect, and then click Timing . In the Grow &amp; Turn dialog box, on the Timing tab, in the Delay box, enter 0.9 , and then click OK . To reproduce the third star with animation effects on this slide, do the following: On the slide, select the second four-point star. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Select the third four-point star. Under Drawing Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, do the following under Size and rotation : In the Height box, enter 0.77” . In the Width box, enter 0.77” . Drag the third four-point star into the top left quarter of the picture, approximately aligned diagonally with the first two stars. On the slide, select the third four-point star. In the Custom Animation task pane, do the following: Select the fifth animation effect (grow &amp; turn entrance effect for the third star). Click the arrow to the right of the effect, and then click Timing . In the Grow &amp; Turn dialog box, on the Timing tab, in the Delay box, enter 0.4 , and then click OK . Select the sixth animation effect (grow &amp; turn exit effect for the third star). Click the arrow to the right of the effect, and then click Timing . In the Grow &amp; Turn dialog box, on the Timing tab, in the Delay box, enter 1.1 , and then click OK . To reproduce the fourth star with animation effects on this slide, do the following: On the slide, select the third four-point star. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Drag the fourth four-point star onto the bottom edge of the picture, near the bottom right corner. On the slide, select the fourth four-point star. In the Custom Animation task pane, do the following: Select the seventh animation effect (grow &amp; turn entrance effect for the fourth star). Click the arrow to the right of the effect, and then click Timing . In the Grow &amp; Turn dialog box, on the Timing tab, in the Delay box, enter 0.6 , and then click OK . Select the eighth animation effect (grow &amp; turn exit effect for the fourth star). Click the arrow to the right of the effect, and then click Timing . In the Grow &amp; Turn dialog box, on the Timing tab, in the Delay box, enter 1.3 , and then click OK . To reproduce the fifth star with animation effects on this slide, do the following: On the slide, select the fourth four-point star. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Select the fifth four-point star. Under Drawing Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, do the following under Size and rotation : In the Height box, enter 0.83” . In the Width box, enter 0.83” . Drag the fifth four-point star until it is centered on the bottom right corner of the picture. On the slide, select the fifth four-point star. In the Custom Animation task pane, do the following: Select the ninth animation effect (grow &amp; turn entrance effect for the fifth star). Click the arrow to the right of the effect, and then click Timing . In the Grow &amp; Turn dialog box, on the Timing tab, in the Delay box, enter 0.8 , and then click OK . Select the 10 th animation effect (grow &amp; turn exit effect for the fifth star). Click the arrow to the right of the effect, and then click Timing . In the Grow &amp; Turn dialog box, on the Timing tab, in the Delay box, enter 1.5 , and then click OK .
  • Custom animation effects: fly in and box out (Intermediate) Tip : For best results when reproducing the picture effect on this slide, you may want to use the Snap objects to other objects feature. To do so, right-click the slide background and then click Grid and Guides . Under Snap to , select Snap objects to other objects . To reproduce the picture effects on this slide, do the following: On the Home tab, in the Slides group, click Layout and then click Blank . On the Insert tab , in the Illustrations group, click Picture. In the Insert Picture dialog box, select a picture and then click Insert . On the slide, select the picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 4” and the Width box is set to 5.33” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . Click Align Middle . On the Home tab, in the Drawing group, click Shapes , and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools , on the Format tab, in the Size group, do the following: In the in the Shape Height box, enter 0.05” . In the Shape Width box, enter 10.3” . Under Drawing Tools , on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill , and then click Blue, Accent 1 (first row, fifth option from the left). Under Drawing Tools , on the Format tab, in the Shape Styles group, click Shape Effects , point to Preset, and then under Presets , click Preset 8 (second row, fourth option from the left). Select the rectangle. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Repeat this process two more times for a total of four rectangles. Drag one of the rectangles until the bottom edge of the rectangle meets the top edge of the picture. Drag another rectangle until the top edge of the rectangle meets the bottom edge of the picture. Press and hold CTRL, and then select the other two rectangles. Under Drawing Tools , on the Format tab, in the Size group, do the following: In the in the Shape Height box, enter 7.8” . In the Shape Width box, enter 0.05” . Drag one of the vertical rectangles until the right edge of the rectangle meets the left edge of the picture. Drag the other vertical rectangle until the left edge of the rectangle meets the right edge of the picture. Press and hold CTRL, and then select both of the horizontal (top and bottom) rectangles. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . Press and hold CTRL, and then select both of the vertical (left and right) rectangles. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Middle . To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation . Press and hold CTRL, and then select the four rectangles on the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Basic , click Fly In , and then click OK . Under Modify: Fly In , in the Start list, select With Previous . Under Modify: Fly In , in the Speed list, select Medium . On the slide, select the top horizontal rectangle. In the Custom Animation task pane, under Modify: Fly-In , in the Direction list, select From Bottom . On the slide, select the bottom horizontal rectangle. In the Custom Animation task pane, under Modify: Fly-In , in the Direction list, select From Top . On the slide, select the left vertical rectangle. In the Custom Animation task pane, under Modify: Fly-In , in the Direction list, select From Right . On the slide, select the right vertical rectangle. In the Custom Animation task pane, under Modify: Fly-In , in the Direction list, select From Left . On the slide, select the picture. In the Custom Animation task pane, do the following: Click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Basic , click Box , and then click OK. Under Modify: Box , in the Start list, select With Previous . Under Modify: Box , in the Direction list, select Out . Also in the Custom Animation task pane, select the fifth animation effect (box effect for the picture). Click the arrow to the right of the selected effect, and then click Timing . In the Fade dialog box, on the Timing tab, do the following: In the Delay box, enter 1.3 . In the Speed box, enter 0.7 seconds , and then click OK . Press and hold CTRL, and then select the four rectangles on the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Exit , and then click More Effects . In the Add Exit Effect dialog box, under Basic , click Fly Out , and then click OK . Under Modify: Fly Out , in the Start list, select With Previous . Under Modify: Fly Out , in the Speed box, select Medium . Also in the Custom Animation task pane, with all four fly-out effects still selected, click the arrow to the right of the last fly-out effect, and then click Timing . In the Fly Out dialog box, on the Timing tab, in the Delay box, enter 0 , and then click OK . Also in the Custom Animation task pane, select the sixth animation effect (first fly-out effect). Under Modify: Fly Out , in the Start list, select On Click . On the slide, select the top horizontal rectangle. In the Custom Animation task pane, select the highlighted fly-out effect. Under Modify: Fly Out , in the Direction list, select To Bottom . On the slide, select the bottom horizontal rectangle. In the Custom Animation task pane, select the highlighted fly-out effect. Under Modify: Fly Out , in the Direction list, select To Top . On the slide, select the left vertical rectangle. In the Custom Animation task pane, select the highlighted fly-out effect. Under Modify: Fly Out , in the Direction list, select To Right . On the slide, select the right vertical rectangle. In the Custom Animation task pane, select the highlighted fly-out effect. Under Modify: Fly Out , in the Direction list, select To Left . On the slide, select the picture. In the Custom Animation task pane, do the following: Click Add Effect , point to Exit , and then click More Effects . In the Add Exit Effect dialog box, under Basic , click Box , and then click OK . Under Modify: Box , in the Start list, select With Previous . Under Modify: Box , in the Direction list, select In . Click the arrow to the right of the ninth animation effect (box effect for the picture), and then click Timing . In the Box dialog box, on the Timing tab, do the following: In the Delay box, enter 0 . In the Speed box, enter 0.7 seconds , and then click OK . To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background . In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear . Click the button next to Direction , and then click Linear Down (first row, second option from the left). Under Gradient stops , click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops , customize the gradient stops as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 46% . Click the button next to Color , and then under Theme Colors click White, Background 1 (first row, first option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100% . Click the button next to Color , and then under Theme Colors click Blue, Accent 1, Lighter 60% (third row, fifth option from the left).
  • Custom animation effects: fly in and box out (Intermediate) Tip : For best results when reproducing the picture effect on this slide, you may want to use the Snap objects to other objects feature. To do so, right-click the slide background and then click Grid and Guides . Under Snap to , select Snap objects to other objects . To reproduce the picture effects on this slide, do the following: On the Home tab, in the Slides group, click Layout and then click Blank . On the Insert tab , in the Illustrations group, click Picture. In the Insert Picture dialog box, select a picture and then click Insert . On the slide, select the picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 4” and the Width box is set to 5.33” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . Click Align Middle . On the Home tab, in the Drawing group, click Shapes , and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools , on the Format tab, in the Size group, do the following: In the in the Shape Height box, enter 0.05” . In the Shape Width box, enter 10.3” . Under Drawing Tools , on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill , and then click Blue, Accent 1 (first row, fifth option from the left). Under Drawing Tools , on the Format tab, in the Shape Styles group, click Shape Effects , point to Preset, and then under Presets , click Preset 8 (second row, fourth option from the left). Select the rectangle. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Repeat this process two more times for a total of four rectangles. Drag one of the rectangles until the bottom edge of the rectangle meets the top edge of the picture. Drag another rectangle until the top edge of the rectangle meets the bottom edge of the picture. Press and hold CTRL, and then select the other two rectangles. Under Drawing Tools , on the Format tab, in the Size group, do the following: In the in the Shape Height box, enter 7.8” . In the Shape Width box, enter 0.05” . Drag one of the vertical rectangles until the right edge of the rectangle meets the left edge of the picture. Drag the other vertical rectangle until the left edge of the rectangle meets the right edge of the picture. Press and hold CTRL, and then select both of the horizontal (top and bottom) rectangles. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . Press and hold CTRL, and then select both of the vertical (left and right) rectangles. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Middle . To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation . Press and hold CTRL, and then select the four rectangles on the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Basic , click Fly In , and then click OK . Under Modify: Fly In , in the Start list, select With Previous . Under Modify: Fly In , in the Speed list, select Medium . On the slide, select the top horizontal rectangle. In the Custom Animation task pane, under Modify: Fly-In , in the Direction list, select From Bottom . On the slide, select the bottom horizontal rectangle. In the Custom Animation task pane, under Modify: Fly-In , in the Direction list, select From Top . On the slide, select the left vertical rectangle. In the Custom Animation task pane, under Modify: Fly-In , in the Direction list, select From Right . On the slide, select the right vertical rectangle. In the Custom Animation task pane, under Modify: Fly-In , in the Direction list, select From Left . On the slide, select the picture. In the Custom Animation task pane, do the following: Click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Basic , click Box , and then click OK. Under Modify: Box , in the Start list, select With Previous . Under Modify: Box , in the Direction list, select Out . Also in the Custom Animation task pane, select the fifth animation effect (box effect for the picture). Click the arrow to the right of the selected effect, and then click Timing . In the Fade dialog box, on the Timing tab, do the following: In the Delay box, enter 1.3 . In the Speed box, enter 0.7 seconds , and then click OK . Press and hold CTRL, and then select the four rectangles on the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Exit , and then click More Effects . In the Add Exit Effect dialog box, under Basic , click Fly Out , and then click OK . Under Modify: Fly Out , in the Start list, select With Previous . Under Modify: Fly Out , in the Speed box, select Medium . Also in the Custom Animation task pane, with all four fly-out effects still selected, click the arrow to the right of the last fly-out effect, and then click Timing . In the Fly Out dialog box, on the Timing tab, in the Delay box, enter 0 , and then click OK . Also in the Custom Animation task pane, select the sixth animation effect (first fly-out effect). Under Modify: Fly Out , in the Start list, select On Click . On the slide, select the top horizontal rectangle. In the Custom Animation task pane, select the highlighted fly-out effect. Under Modify: Fly Out , in the Direction list, select To Bottom . On the slide, select the bottom horizontal rectangle. In the Custom Animation task pane, select the highlighted fly-out effect. Under Modify: Fly Out , in the Direction list, select To Top . On the slide, select the left vertical rectangle. In the Custom Animation task pane, select the highlighted fly-out effect. Under Modify: Fly Out , in the Direction list, select To Right . On the slide, select the right vertical rectangle. In the Custom Animation task pane, select the highlighted fly-out effect. Under Modify: Fly Out , in the Direction list, select To Left . On the slide, select the picture. In the Custom Animation task pane, do the following: Click Add Effect , point to Exit , and then click More Effects . In the Add Exit Effect dialog box, under Basic , click Box , and then click OK . Under Modify: Box , in the Start list, select With Previous . Under Modify: Box , in the Direction list, select In . Click the arrow to the right of the ninth animation effect (box effect for the picture), and then click Timing . In the Box dialog box, on the Timing tab, do the following: In the Delay box, enter 0 . In the Speed box, enter 0.7 seconds , and then click OK . To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background . In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear . Click the button next to Direction , and then click Linear Down (first row, second option from the left). Under Gradient stops , click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops , customize the gradient stops as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 46% . Click the button next to Color , and then under Theme Colors click White, Background 1 (first row, first option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100% . Click the button next to Color , and then under Theme Colors click Blue, Accent 1, Lighter 60% (third row, fifth option from the left).
  • Custom animation effects: picture entrance with oval border (Intermediate) Tip : You will need to use drawing guides to reproduce the effects in this slide. To display and set the drawing guides, do the following: Right-click the slide background and select Grid and Guides . In the Grid and Guides dialog box, under Guide settings , select Display drawing guides on screen , and then click OK . ( Note: One horizontal and one vertical guide will display on the slide at 0.00, the default position. As you drag the guides, the cursor will display the new position.) On the slide, do the following: Press and hold CTRL, select the vertical guide, and then drag it left to the 2.00 position. Press and hold CTRL, select the vertical guide, and then drag it left to the 4.00 position. Press and hold CTRL, select the vertical guide, and then drag it right to the 2.00 position. Press and hold CTRL, select the vertical guide, and then drag it right to the 4.00 position. Press and hold CTRL, select the horizontal guide, and then drag it up to the 0.83 position. Press and hold CTRL, select the horizontal guide, and then drag it up to the 2.42 position. Press and hold CTRL, select the horizontal guide, and then drag it down to the 0.83 position. Press and hold CTRL, select the horizontal guide, and then drag it down to the 2.42 position. To reproduce the background effects on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . On the Design tab, in the Background group, click the arrow next to Background Styles , and then click Style 5 (second row, first option from the left). ( Note : If this action is taken in a PowerPoint presentation containing more than one slide, the background style will be applied to all of the slides.) To reproduce the picture effects on this slide, do the following: On the Insert tab, in the Illustrations group, click Picture . In the Insert Picture dialog box, select a picture, and then click Insert . On the slide, select the picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 4.9” and the Width box is set to 7.92” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Middle . Click Align Center . Under Picture Tools , on the Format tab, in the Picture Styles group, click Picture Effects , point to Glow , and then do the following: Under Glow Variations , click Accent color 1, 8 pt glow (second row, first option from the left). Point to More Glow Colors , and under Theme Colors click White, Background 1 (first row, first option from the left). To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes , and then under Basic Shapes click Oval (first row, second option from the left). On the slide, drag to draw an oval. Select the oval. Under Drawing Tools , on the Format tab, in the Size group, do the following: In the Shape Height box, enter 0.5” . In the Shape Width box, enter 0.5” . Under Drawing Tools , on the Format tab, in the Shape Styles group, click the arrow next to Shape Outline , and then click No Outline . On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Radial . Click the button next to Direction , and then click From Center (third option from the left). Under Gradient stops , click Add or Remove until three stops appear in the drop-down list. Also under Gradient stops , customize the gradient stops as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 0% . Click the button next to Color , and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 0% . Select Stop 2 from the list, and then do the following: In the Stop position box, enter 50% . Click the button next to Color , and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 100% . Select Stop 3 from the list, and then do the following: In the Stop position box, enter 100% . Click the button next to Color , and then under Theme click White, Background 1 (first row, first option from the left). In the Transparency box, enter 100% . On the slide, select the oval. On the Home tab, in the Clipboard group, click the arrow under Paste and then click Duplicate . Repeat this process until there is a total of 14 ovals. To arrange the ovals along the top edge of the picture, do the following: Drag one oval to the intersection of the 4.00 vertical left and 2.42 horizontal top drawing guides, at the top left corner of the picture. Drag one oval to the intersection of the 2.00 vertical left and 2.42 horizontal top drawing guides, at the left side of the top edge of the picture. Drag one oval to the intersection of the 0.00 vertical right and 2.42 horizontal top drawing guides, at the center of the top edge of the picture. Drag one oval to the intersection of the 2.00 vertical right and 2.42 horizontal top drawing guides, at the right side of the top edge of the picture. Drag one oval to the intersection of the 4.00 vertical right and 2.42 horizontal top drawing guides, at the top right corner of the picture. To arrange the ovals along the sides of the picture, do the following: Drag one oval to the intersection of the 4.00 vertical left and 0.83 horizontal top drawing guides, at the top of the left edge of the picture. Drag one oval to the intersection of the 4.00 vertical left and 0.83 horizontal bottom drawing guides, at the bottom of the left edge of the picture. Drag one oval to the intersection of the 4.00 vertical right and 0.83 horizontal top drawing guides, at the top of the right edge of the picture. Drag one oval to the intersection of the 4.00 vertical right and 0.83 horizontal bottom drawing guides, at the bottom of the right edge of the picture. To arrange the ovals along the bottom edge of the picture, do the following: Drag one oval to the intersection of the 4.00 vertical left and 2.42 horizontal bottom drawing guides, at the bottom left corner of the picture. Drag one oval to the intersection of the 2.00 vertical left and 2.42 horizontal bottom drawing guides, at the left side of the bottom edge of the picture. Drag one oval to the intersection of the 0.00 vertical right and 2.42 horizontal bottom drawing guides, at the center of the bottom edge of the picture. Drag one oval to the intersection of the 2.00 vertical right and 2.42 horizontal bottom drawing guides, at the right side of the bottom edge of the picture. Drag one oval to the intersection of the 4.00 vertical right and 2.42 horizontal bottom drawing guides, at the bottom right corner of the picture. Right-click the slide background area, and then click Grid and Guides . In the Grid and Guides dialog box, under Guide settings , clear Display drawing guides on screen , and then click OK . To reproduce the picture animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation . On the slide, select the picture. In the Custom Animation task pane, click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Subtle , click Fade , and then click OK . Also in the Custom Animation task pane, select the animation effect (fade effect), and then do the following under Modify: Fade : In the Start list, select With Previous . In the Speed list, select Very Slow . Also the Custom Animation task pane, click the arrow to the right of the animation effect, and then click Effect Options . In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.5 , and then click OK . To reproduce the top oval animation effects on this slide, do the following: Press and hold CTRL, and then select all the ovals on the top edge of the picture. ( Note: For best results, select the ovals in sequence from left to right.) In the Custom Animation task pane, click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Basic , click Fly In , and then click OK . Also in the Custom Animation task pane, do the following: Press and hold CTRL, and then select the second, third, fourth, fifth, and sixth animation effects (fly-in effects for the top ovals), and then do the following under Modify: Fly In : In the Start list, select With Previous . In the Direction list, select From Top-Right . In the Speed list, select Fast . Note: it may be necessary to check that the delay for the second animation effect is set to 0 seconds. To do so, click the arrow to the right of the effect, and then click Timing . In the Fly In dialog box, on the Timing tab, in the Delay box, enter 0 , and then click OK . Select the third animation effect. Click the arrow to the right of the effect, and then click Timing . In the Fly In dialog box, on the Timing tab, in the Delay box, enter 0.2 , and then click OK . Select the fourth animation effect. Click the arrow to the right of the effect, and then click Timing . In the Fly In dialog box, on the Timing tab, in the Delay box, enter 0.4 , and then click OK . Select the fifth animation effect. Click the arrow to the right of the effect, and then click Timing . In the Fly In dialog box, on the Timing tab, in the Delay box, enter 0.6 , and then click OK . Select the sixth animation effect. Click the arrow to the right of the effect, and then click Timing . In the Fly In dialog box, on the Timing tab, in the Delay box, enter 0.8 , and then click OK . To reproduce the left and right oval animation effects on this slide, do the following: On the slide, press and hold CTRL, and then select the four ovals in the middle of the left and right edges of the picture. ( Note: For best results, select the top right oval first, then the top left oval, then the bottom right oval, and then the bottom left oval.) In the Custom Animation task pane, click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Basic , click Fly In , and then click OK . Also in the Custom Animation task pane, do the following: Press and hold CTRL, and then select the seventh, eighth, ninth, and 10 th animation effects (fly-in effects for the left and right ovals), and then do the following under Modify: Fly In : In the Start list, select With Previous . In the Direction list, select From Top-Right . In the Speed list, select Fast . Press and hold CTRL, and then select the seventh and eighth animation effects (fly-in effects for the top ovals on the left and right edges of the picture). Click the arrow to the right of one of the selected effects, and then click Timing . In the Fly In dialog box, on the Timing tab, in the Delay box, enter 1.0 , and then click OK . Press and hold CTRL, and then select the ninth and 10 th animation effects (fly-in effects for the bottom ovals on the left and right edges of the picture). Click the arrow to the right of one of the selected effects, and then click Timing . In the Fly In dialog box, on the Timing tab, in the Delay box, enter 1.2 , and then click OK . To reproduce the bottom oval animation effects on this slide, do the following: On the slide, press and hold CTRL, and then select all the ovals on the bottom edge of the picture. ( Note: For best results, select the ovals in sequence from right to left.) In the Custom Animation task pane, click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Basic , click Fly In , and then click OK . Also in the Custom Animation task pane, do the following: Press and hold CTRL, and then select the 11 th , 12 th , 13 th , 14 th , and 15 th animation effects (fly-in effects for the bottom ovals), and then do the following under Modify: Fly In : In the Start list, select With Previous . In the Direction list, select From Top-Right . In the Speed list, select Fast . Select the 11 th animation effect. Click the arrow to the right of the effect, and then click Timing . In the Fly In dialog box, on the Timing tab, in the Delay box, enter 1.4 , and then click OK . Select the 12 th animation effect. Click the arrow to the right of the effect, and then click Timing . In the Fly In dialog box, on the Timing tab, in the Delay box, enter 1.6 , and then click OK . Select the 13 th animation effect. Click the arrow to the right of the effect, and then click Timing . In the Fly In dialog box, on the Timing tab, in the Delay box, enter 1.8 , and then click OK . Select the 14 th animation effect. Click the arrow to the right of the effect, and then click Timing . In the Fly In dialog box, on the Timing tab, in the Delay box, enter 2.0 , and then click OK . Select the 15 th animation effect. Click the arrow to the right of the effect, and then click Timing . In the Fly In dialog box, on the Timing tab, in the Delay box, enter 2.2 , and then click OK . On the slide, press and hold CTRL, and then select all the ovals. In the Custom Animation task pane, click Add Effect , point to Exit , and then click More Effects . In the Add Exit Effect dialog box, under Moderate , click Stretchy , and then click OK . In the Custom Animation task pane, select all the stretchy exit effects (from the 16 th to the 30 th animation effect in the list), and then do the following under Modify: Stretch : In the Start list, select With Previous . In the Speed list, select Medium . Click the arrow to the right of one of the selected effects, and then click Timing . In the Stretchy dialog box, on the Timing tab, in the Delay box, enter 3 , and then click OK .
  • Custom animation effects: picture changes during motion path (Advanced) To reproduce the first picture effect on this slide, do the following: On the Home tab, in the Slides group, click Layout and then click Blank . On the Insert tab, in the Illustrations group, click Picture . In the Insert Picture dialog box, select a picture, and then click Insert . Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 2” and the Width box is set to 2” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Under Picture Tools , on the Format tab, in the bottom right corner of the Picture Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line , click the button next to Color , and then under Theme Colors click White, Background 1 (first row, first option from the left). Also in the Format Shape dialog box, click Line Style in the left pane, and then in the Line Style pane, in the Width box, enter 1.5 pt . Also in the Format Shape dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets , and then under Outer click Offset Center (second row, second option from the left). On the Animations tab, in the Animations group, click Custom Animation . On the slide, select the picture. In the Custom Animation task pane, click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Subtle , click Fade , and then click OK . Also in the Custom Animation task pane, select the first animation effect (fade effect for the picture), and then under Modify: Fade do the following: In the Start list, select With Previous . In the Speed list, select Fast . Also in the Custom Animation task pane, click Add Effect , point to Motion Paths , and then click Right . Also in the Custom Animation task pane, select the second animation effect (motion path for the picture), and then under Modify: Right , in the Start list, select With Previous . Also in the Custom Animation task pane, click the arrow to the right of the second animation effect, and then click Timing . In the Right dialog box, on the Timing tab, in the Speed box, enter 10 seconds . On the slide, select the motion path. Press and hold SHIFT to constrain the path to a straight, horizontal line, and then drag the right adjustment handle to the right, stopping approximately 1.5” left of the right edge of the slide. ( Note: On the View tab, in the Show/Hide group, select Ruler to measure approximately where the endpoint is on the slide.) To reproduce the other pictures on this slide, do the following: Select the picture. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Repeat this process for a total of four duplicate pictures. Select a duplicate picture. Under Picture Tools , on the Format tab, in the Adjust group, click Change Picture . In the Insert Picture dialog box, select a new picture, and then click Insert . Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 2” and the Width box is set to 2” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Repeat steps 2-4 for the other duplicate pictures. To reproduce the other animation effects on this slide, do the following: In the Custom Animation task pane, select the third animation effect (fade effect for the second picture). Click the arrow to the right of the selected effect, and then click Timing . In the Fade dialog box, on the Timing tab, in the Delay box, enter 2.5 . Also in the Custom Animation task pane, select the fifth animation effect (fade effect for the third picture). Click the arrow to the right of the selected effect, and then click Timing . In the Fade dialog box, on the Timing tab, in the Delay box, enter 5 . Also in the Custom Animation task pane, select the seventh animation effect (fade effect for the fourth picture). Click the arrow to the right of the selected effect, and then click Timing . In the Fade dialog box, on the Timing tab, in the Delay box, enter 7.5 . On the slide, press and hold SHIFT and select all four pictures. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align Selected Objects . Click Align Center . Click Align Middle . Drag the pictures into the top left corner of the slide. To reproduce the background effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes , and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools , on the Format tab, in the Size group, do the following: In the Shape Height box, enter 3.42” . In the Shape Width box, enter 10” . Under Drawing Tools , on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear . Click the button next to Direction , and then click Linear Down (first row, second option from the left). Under Gradient stops , click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops , customize the gradient stops that you added as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 1% . Click the button next to Color , click More Colors , and then in the Colors dialog box, on the Custom tab, enter values for Red: 94 , Green: 156 , Blue: 198 . In the Transparency box, enter 60% . Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100% . Click the button next to Color , click More Colors , and then in the Colors dialog box, on the Custom tab, enter values for Red: 94 , Green: 156 , Blue: 198 . In the Transparency box, enter 90% . On the slide, drag the rectangle vertically to position it just above the middle of the slide. On the Home tab, in the Drawing group, click Arrange , and then do the following: Point to Align , and then click Align to Slide . Point to Align , and then click Align Center . Click Send to Back . Right-click the slide background area, and then click Format Background . In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear . Click the button next to Direction , and then click Linear Down (first row, second option from the left) In the Angle box, enter 90⁰ . Under Gradient stops , click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops , customize the gradient stops that you added as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 70% . Click the button next to Color , and then click White, Background 1, Darker 5% (second row, first option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100% . Click the button next to Color , and then click White, Background 1, Darker 25% (fourth row, first option from the left).
  • Custom animation effects: picture triptych, slide 1, left picture to front center (Intermediate) Tip: For the effects on this slide, use pictures with a “portrait” (vertical) orientation. You will need to use drawing guides to reproduce the effects in this slide. To reproduce the picture effects on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . On the Insert tab, in the Illustrations group, click Picture . In the Insert Picture dialog box, select a picture, and then click Insert . Select the picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 3.5” and the Width box is set to 2.35” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . On the Home tab, in the bottom right corner of the Drawing group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line , click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 25% (fourth row, second option from the left). Also in the Format Picture dialog box, click Line Style in the left pane, and then in the Line Style pane, in the Width box, enter 8 pt . Also in the Format Picture dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets , and then under Perspective , click Perspective Diagonal Upper Right (first row, second option from the left). Also in the Format Picture dialog box, click 3-D Format in the left pane, and then do the following in the 3-D Format tab: Under Bevel , click the button next to Top , and then under Bevel click Relaxed Inset (first row, second option from the left). Next to Top , in the Width box, enter 8 pt , and in the Height box, enter 6 pt . Under Depth , click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 25% (fourth row, second option from the left). In the Depth box, enter 12 pt . Under Surface , click the button next to Material , and then under Standard click Warm Matte (second option from the left). On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Drag the duplicate picture to the right on the slide. Right-click the duplicate picture, and click Change Picture . In the Insert Picture dialog box, select a picture and click Insert . Select the first picture. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Drag the duplicate picture to the left on the slide. Right-click the duplicate picture, and click Change Picture . In the Insert Picture dialog box, select a picture and click Insert . Select the picture on the left side of the slide. On the Home tab, in the bottom right corner of the Drawing group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click 3-D Rotation in the left pane. In the 3-D Rotation pane, click the button next to Presets , and then under Perspective , click Perspective Heroic Extreme Right (third row, third option from the left). Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 3.8” and the Width box is set to 2.53” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Select the picture on the right side of the slide. On the Home tab, in the bottom right corner of the Drawing group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click 3-D Rotation in the left pane. In the 3-D Rotation pane, click the button next to Presets , and then under Perspective , click Perspective Heroic Extreme Left (third row, second option from the left). Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 4.17” and the Width box is set to 2.78” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Select the picture on the left side of the slide. On the Home tab, in the Clipboard group, click Paste , and then click Duplicate . Select the duplicate picture. On the Home tab, Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . Click Align Middle . Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, under Size and rotate , do the following: In the Height box, enter 5.83” . In the Width box, enter 3.89” . Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects , point to 3-D Rotation , and then click No Rotation . To reproduce the animation effects on this slide, do the following: Right-click the slide background, and then click Grid and Guides . In the Grid and Guides dialog box, under Guide settings , select Display drawing guides on screen . ( Note: One horizontal and one vertical guide will display on the slide at 0.00.) On the Animations tab, in the Animations group, click Custom Animation . Select the picture on the left side of the slide, and then in the Custom Animation task pane, do the following: Click Add Effect , point to Emphasis , and then click More Effects . In the Add Emphasis Effect dialog box, under Basic , click Grow/Shrink , and then click OK . Under Modify: Grow/Shrink , do the following: In the Start list, select With Previous . In the Size list, in the Custom box, enter 133% , and then press ENTER. In the Speed list, select Fast . Click Add Effect , point to Motion Paths , and then click Right . Under Modify: Right , do the following: In the Start list, select With Previous . In the Speed list, select Fast . On the slide, select the right motion path. Point to the endpoint (red arrow) of the selected right motion path until the cursor becomes a two-headed arrow. Drag the endpoint to the intersection of the horizontal and vertical drawing guides at the center of the slide. Select the picture on the left side of the slide. In the Custom Animation task pane, click Add Effect , point to Exit , and then click More Effects . In the Add Exit Effect dialog box, under Subtle , click Fade , and then click OK . Under Modify: Fade , do the following: In the Start list, select With Previous . In the Speed list, select Fast . Select the large duplicate picture in the front center of the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Subtle , click Fade , and then click OK . Under Modify: Fade , do the following: In the Start list, select With Previous . In the Speed list, select Fast . Click Add Effect , point to Motion Paths , and then click Right . Under Modify: Right , do the following: In the Start list, select With Previous . In the Speed list, select Medium . Also in the Custom Animation task pane, select the fifth animation effect (second right motion path). On the slide, point to the endpoint (red arrow) of the selected right motion path until the cursor becomes a two-headed arrow. Drag the endpoint to the intersection of the horizontal and vertical drawing guides at the center of the slide, into the same position as the endpoint of the first right motion path. On the slide, point to the starting point (green arrow) of the selected second motion path until the cursor becomes a two-headed arrow. On the slide, drag the starting point to the same position as the starting point for the first right motion path. Right-click the slide background, and then click Grid and Guides . In the Grid and Guides dialog box, under Guide settings , clear Display drawing guides on screen , and then click OK . To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background . In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear . Click the button next to Direction , and then click Linear Down (first row, second option from the left). Under Gradient stops , click Add or Remove until four stops appear in the drop-down list. Also under Gradient stops , customize the gradient stops as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 0% . Click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 5% (sixth row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 24% . Click the button next to Color , click More Colors , and then in the Colors dialog box, on the Custom tab, enter values for Red: 125 , Green: 121 , and Blue: 107 . Select Stop 3 from the list, and then do the following: In the Stop position box, enter 35% . Click the button next to Color , click More Colors , and then in the Colors dialog box, on the Custom tab, enter values for Red: 125 , Green: 121 , Blue: 107 . Select Stop 4 from the list, and then do the following: In the Stop position box, enter 90% . Click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 5% (sixth row, second option from the left).
  • Custom animation effects: picture series with motion paths (Intermediate) To reproduce the first picture on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . On the Insert tab , in the Illustrations group, click Picture . On the Insert tab , in the Illustrations group, click Picture . In the Insert Picture dialog box, select a picture and then click Insert . Select the picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 3.5” and the Width box is set to 5.2” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Under Picture Tools , on the Format tab, in the Picture Styles group, do the following: Click Picture Shape , and then under Rectangles , select Round Diagonal Corner Rectangle (ninth option from the left). Click Picture Effects , point to Shadow , and then under Outer click Offset Center (second row, second option from the left). On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . Click Align Middle . To reproduce the animation effects for the first picture on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation . On the slide, select the picture. In the Custom Animation task pane, do the following: Click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Subtle , click Fade , and then click OK . Under Modify: Fade , in the Start list, select With Previous . Under Modify: Fade , in the Speed list, select Medium . Click Add Effect , point to Motion Paths , and then click Down . Under Modify: Down , in the Start list, select With Previous . Under Modify: Down , in the Speed list, select Medium . Also in the Custom Animation task pane, select the second animation effect (down motion path). On the slide, point to the endpoint (red arrow) of the selected down motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the endpoint about 0.5” above the bottom of the slide. On the slide, right-click the down motion path, and then click Reverse Path Direction . ( Note: The red arrow will switch to the top end of the motion path.) On the slide, select the picture. In the Custom Animation task pane, do the following: Click Add Effect , point to Motion Paths , and then click Up . Under Modify: Up , in the Start list, select After Previous . Under Modify: Up , in the Speed list, select Fast . Also in the Custom Animation task pane, select the third animation effect (up motion path). On the slide, point to the endpoint (red arrow) of the selected up motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the endpoint down to shorten the path to approximately 0.5”. ( Note: Be careful not to drag the red arrow closer then 0.5” to the green arrow starting point, otherwise the position of the green arrow will change.) On the slide, right-click the selected up motion path and click Reverse Path Direction . ( Note: The green arrow will switch to the top end of the motion path.) In the Custom Animation task pane, select the second animation effect (down motion path). On the slide, point to the endpoint (red arrow) of the selected down motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the endpoint of the motion path up about 0.5”, into the same position as the green arrow from the up motion path (third animation effect in the Custom Animation task pane). On the slide, select the picture. In the Custom Animation task pane, do the following: Click Add Effect , point to Motion Paths , and then click Up . Under Modify: Up , in the Start list, select On Click . Under Modify: Up , in the Speed list, select Fast . Also in the Custom Animation task pane, select the fourth animation effect (second up motion path). On the slide, point to the endpoint (red arrow) of the selected up motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the endpoint down to shorten the path to approximately 0.5”. ( Note: Make sure not to drag the red arrow closer than 0.5” to the green arrow starting point, otherwise the position of the green arrow will change.) On the slide, select the picture. In the Custom Animation task pane, do the following: Click Add Effect , point to Motion Paths , and then click Down . Under Modify: Down , in the Start list, select After Previous . Under Modify: Down , in the Speed list, select Medium . Also in the Custom Animation task pane, select the fifth animation effect (second down motion path). On the slide, point to the endpoint (red arrow) of the selected down motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the endpoint of the motion path about 0.5” above the bottom of slide, to the same position as the green arrow from the first down motion path (second animation effect in the Custom Animation task pane). On the slide, select the picture. In the Custom Animation task pane, do the following: Click Add Effect , point to Exit , and then click More Effects . In the Add Exit Effect dialog box, under Subtle , click Fade , and then click OK . Under Modify: Fade , in the Start list, select With Previous . Under Modify: Fade , in the Speed list, select Medium . To reproduce the second and third pictures with animation effects on this slide, do the following: On the slide, select the first picture. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Select the second picture. Under Picture Tools , on the Format tab, in the Adjust group, click Change Picture . In the Insert Picture dialog box, select a picture and then click Insert . On the slide, select the second picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 3.5” and the Width box is set to 5.2” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Select the second picture. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Select the third picture. Under Picture Tools , on the Format tab, in the Adjust group, click Change Picture . In the Insert Picture dialog box, select a picture and then click Insert . On the slide, select the third picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 3.5” and the Width box is set to 5.2” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Press and hold CTRL, and then select all three pictures. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . Click Align Middle . To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background . In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear . Click the button next to Direction , and then click Linear Down (first row, second option from the left). Under Gradient stops , click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops , customize the gradient stops as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 34% . Click the button next to Color , and then under Theme Colors click Black, Text 1 (first row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100% . Click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 25% (fourth row, second option from the left).
  • Custom animation effects: widescreen picture fades (Basic) To reproduce the picture effects on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . On the Home tab, in the Drawing group, click Shapes , and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools , on the Format tab, in the Size group, do the following: In the Shape Height box, enter 4.55” . In the Shape Width box, enter 8” . On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, in the left pane, click Fill . In the Fill pane, click Solid fill , click the button next to Color , and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Format Shape dialog box, in the left pane, click Line Color . In the Line Color pane, click Solid line , click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 35% (third row, second option from the left). Also in the Format Shape dialog box, in the left pane, click Line Style , and then do the following in the Line Style pane: In the Width box, enter 20 pt . In the Cap type list, select Flat . In the Join type list, select Miter . Also in the Format Shape dialog box, in the left pane, click Shadow . In the Shadow pane, click the button next to Presets , and then under Perspective click Perspective Diagonal Upper Right (first row, second option from the left). Also in the Format Shape dialog box, in the left pane, click 3-D Format , and then do the following in the 3-D Format pane: Under Bevel , click the button next to Top , and then under Bevel click Hard Edge (third row, third option from the left). Next to Top , in the Width box, enter 27 pt , and in the Height box, enter 5.5 pt . Under Depth , click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 35% (third row, second option from the left). In the Depth box, enter 40 pt . Also in the Format Shape dialog box, in the left pane, click 3-D Rotation . In the 3-D Rotation pane, click the button next to Presets , under Perspective click Perspective Contrasting Left (second row, fourth option from the left), and then do the following: In the X box, enter 20⁰ . In the Y box, enter 9.3⁰ . In the Z box, enter 358⁰ . In the Perspective box, enter 45⁰ . On the slide, drag the rectangle slightly to the left to position it in the middle of the slide. On the Insert tab, in the Illustrations group, click Picture . In the Insert Picture dialog box, select a picture, and then click Insert . On the slide, select the picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 4.11” and the Width box is set to 7.3” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Under Drawing Tools , on the Format tab, in the Picture Styles group, click the arrow next to Picture Border , and then do the following: Under Theme Colors click Black, Text 1 (first row, second option from the left). Point to Weight , and then click 3 pt . Under Picture Tools, on the Format tab, in the bottom right corner of the Picture Styles group, click the Format Shape dialog box launcher. In the Format Picture dialog box, in the left pane, click 3-D Rotation . In the 3-D Rotation pane, click the button next to Presets , under Perspective click Perspective Contrasting Left (second row, fourth option from the left), and then do the following: In the X box, enter 20⁰ . In the Y box, enter 9.3⁰ . In the Z box, enter 358⁰ . In the Perspective box, enter 45⁰ . Select the picture. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Repeat this process one more time for a total of three pictures. Select the second picture. Under Picture Tools, on the Format tab, in the Adjust group, click Change Picture . In the Insert Picture dialog box, select a picture, and then click Insert . On the slide, select the second picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 4.11” and the Width box is set to 7.3” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Select the third picture. Under Picture Tools, on the Format tab, in the Adjust group, click Change Picture . In the Insert Picture dialog box, select a picture, and then click Insert . On the slide, select the third picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 4.11” and the Width box is set to 7.3” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Press and hold CTRL, and then select all three pictures on the slide. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Middle . Click Align Center . Drag the group of three pictures into the middle of the rectangle (picture frame). To reproduce the animation effects on this slide, do the following: On the Home tab, in the Editing group, click Select , and then click Selection Pane . On the Animations tab, in the Animations group, click Custom Animation . In the Selection and Visibility pane, select the first picture. In the Custom Animation task pane, do the following: Click Add Effect , point to Exit , and then click More Effects . In the Add Exit Effect dialog box, under Subtle , click Fade , and then click OK . Under Modify: Fade , in the Start list, select After Previous . Under Modify: Fade , in the Speed list, select Medium . Also in the Custom Animation task pane, click the arrow to the right of the animation effect, and then click Timing . In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.5 . In the Selection and Visibility pane, select the second picture. In the Custom Animation task pane, do the following: Click Add Effect , point to Exit , and then click More Effects . In the Add Exit Effect dialog box, under Subtle , click Fade , and then click OK . Under Modify: Fade , in the Start list, select After Previous . Under Modify: Fade , in the Speed list, select Medium . Also in the Custom Animation task pane, click the arrow to the right of the second animation effect, and then click Timing . In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.5 . In the Selection and Visibility pane, select the third picture. In the Custom Animation task pane, do the following: Click Add Effect , point to Exit , and then click More Effects . In the Add Exit Effect dialog box, under Subtle , click Fade , and then click OK . Under Modify: Fade , in the Start list, select After Previous . Under Modify: Fade , in the Speed list, select Medium . Also in the Custom Animation task pane, click the arrow to the right of the third animation effect, and then click Timing . In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.5 . To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background . In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear . Click the button next to Direction , and then click Linear Up (second row, second option from the left). Under Gradient stops , click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops , customize the gradient stops as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 0% . Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 35% (fifth row, first option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 54% . Click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 15% (fifth row, second option from the left).
  • Custom animation effects: video wall reveal picture (Basic) Tip : For best results when reproducing the picture effects on this slide, you may want to use the Snap objects to grid feature. To do so, right-click the slide background and select Grid and Guides . Under Snap to , select Snap objects to grid . To reproduce the background on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . Right-click the slide background area, and then click Format Background . In the Format Background dialog box, in the left pane, select Fill , and then do the following in the Fill pane: Select Picture or texture fill . Under Insert from , click File . In the Insert Picture dialog box, select a picture, and then click Insert . To reproduce the first row of squares with animation effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes , and then under Rectangles click Rectangle (first option on the left). On the slide, drag to draw the rectangle. Select the rectangle. Under Drawing Tools , on the Format tab, in the Size group, do the following to change it into a square: In the Shape Height box, enter 2.5” . In the Shape Width box, enter 2.5” . Under Drawing Tools , on the Format tab, in the Shape Styles group, do the following: Click the arrow next to Shape Fill , and then under Theme Colors click Black, Text 1 (first row, second option from the left). Click the arrow next to Shape Outline , and then click No Outline . Select the square. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Repeat this process two more times for a total of four squares. Press and hold CTRL, and then select all four squares. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Top . Click Distribute Horizontally . Press and hold CTRL, and then select all four squares. On the Animations tab, in the Animations group, click Custom Animation , and then do the following in the Custom Animation task pane: Click Add Effect , point to Exit , and then click More Effects . In the Add Exit Effect dialog box, under Subtle , click Fade , and then click OK . Under Modify: Fade , in the Start list, select With Previous . Under Modify: Fade , in the Speed list, select Very Fast . Also in the Custom Animation task pane, do the following: Select the first animation effect. Click the arrow to the right of the first animation effect (fade effect for the first square), and then click Timing . In the Fade dialog box, on the Timing tab, in the Delay box, enter 0 , and then click OK . Select the second animation effect. Click the arrow to the right of the second animation effect (fade effect for the second square), and then click Timing . In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.1 , and then click OK . Select the third animation effect. Click the arrow to the right of the third animation effect (fade effect for the third square), and then click Timing . In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.2 , and then click OK . Select the fourth animation effect. Click the arrow to the right of the fourth animation effect (fade effect for the fourth square), and then click Timing . In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.3 , and then click OK . To reproduce the second row of squares with animation effects on this slide, do the following: On the slide, select one of the squares in the first row. On the Home tab, in the Clipboard group, click the arrow under Paste , click Duplicate , and then drag the duplicate square away from the first row of squares. Repeat this process two more times for a total of four new squares (a total of eight squares on the slide). On the Home tab, in the Editing group, click Select , and then click Selection Pane . Press and hold CTRL, and then in the Selection and Visibility pane, select the fifth, sixth, seventh, and eighth objects (four new squares). On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align Middle . Click Distribute Horizontally . In the Custom Animation task pane, select the fifth, sixth, seventh, and eighth animation effects (fade effects for the second row of squares), and then do the following: Under Modify: Fade , in the Start list, select With Previous . Under Modify: Fade , in the Speed list, select Very Fast . Also in the Custom Animation task pane, do the following: Select the fifth animation effect. Click the arrow to the right of the fifth animation effect (fade effect for the fifth square), and then click Timing . In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.4 , and then click OK . Select the sixth animation effect. Click the arrow to the right of the sixth animation effect (fade effect for the sixth square), and then click Timing . In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.5 , and then click OK . Select the seventh animation effect. Click the arrow to the right of the seventh animation effect (fade effect for the seventh square), and then click Timing . In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.6 , and then click OK . Select the eighth animation effect. Click the arrow to the right of the eighth animation effect (fade effect for the eighth square), and then click Timing . In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.7 , and then click OK . To reproduce the third row of squares with animation effects on this slide, do the following: On the slide, select one of the squares in the second row. On the Home tab, in the Clipboard group, click the arrow under Paste , click Duplicate , and then drag the duplicate square away from the second row of squares. Repeat this process two more times for a total of four new squares (a total of 12 squares on the slide). Press and hold CTRL, and then in the Selection and Visibility pane, select the ninth, 10 th , 11 th , and 12 th objects (four new squares). On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align Bottom . Click Distribute Horizontally . In the Custom Animation task pane, select the ninth, 10 th , 11 th , and 12 th animation effects (fade effects for the third row of squares), and then do the following: Under Modify: Fade , in the Start list, select With Previous . Under Modify: Fade , in the Speed list, select Very Fast . Also in the Custom Animation task pane, do the following: Select the ninth animation effect. Click the arrow to the right of the ninth animation effect (fade effect for the ninth square), and then click Timing . In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.8 , and then click OK . Select the 10 th animation effect. Click the arrow to the right of the 10 th animation effect (fade effect for the 10 th square), and then click Timing . In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.9 , and then click OK . Select the 11 th animation effect. Click the arrow to the right of the 11 th animation effect (fade effect for the 11 th square), and then click Timing . In the Fade dialog box, on the Timing tab, in the Delay box, enter 1 , and then click OK . Select the 12 th animation effect. Click the arrow to the right of the 12 th animation effect (fade effect for the 12 th square), and then click Timing . In the Fade dialog box, on the Timing tab, in the Delay box, enter 1.1 , and then click OK .
  • Custom animation effects: video wall picture change (Intermediate) Tip : For the best results with the effects on this slide, choose pictures that cover the entire slide area (7.5” high and 10” wide). To reproduce the picture, animation, and background effects on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . Right-click the slide background area, and then click Format Background . In the Format Background dialog box, in the left pane, click Fill . In the Fill pane, click Picture or texture fill , and then under Insert from , click File . In the Insert Picture dialog box, select a picture, and then click Insert . On the Insert tab, in the Illustrations group, click Picture . In the Insert Picture dialog box, select a second picture, and then click Insert . On the slide, select the second picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 7.5” and the Width box is set to 10” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. On the Home tab, in the Drawing group, click Shapes , and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools , on the Format tab, in the Size group, do the following: In the Shape Height box, enter 1.88” . In the Shape Width box, enter 2” . On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, in the left pane, click Fill , and then select Slide background fill in the Fill pane. Select the rectangle. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Repeat this process three more times for a total of five rectangles. Press and hold CTRL, and then select all five rectangles. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Top . Click Distribute Horizontally . With all five rectangles still selected, on the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . ( Note: There should now be a second row of five rectangles, and a total of 10 rectangles on the slide.) Select the second row of five rectangles. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . Drag the second group of rectangles until the top edge touches the bottom edge of the middle rectangle in the first row of rectangles. On the Home tab, Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Distribute Horizontally . With the second row of rectangles still selected, on the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . ( Note: There should now be a third row of five rectangles, and a total of 15 rectangles on the slide.) Press and hold CTRL, and then select the five new rectangles. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . Drag the third group of rectangles until the top edge touches the bottom edge of the middle rectangle in the second row of rectangles. On the Home tab, Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Distribute Horizontally . With the third row of rectangles still selected, on the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . ( Note: There should now be a fourth row of five rectangles, and a total of 20 rectangles on the slide.) Press and hold CTRL, and then select the five new rectangles. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . Click Distribute Horizontally . Click Align Bottom . To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation . Press and hold CTRL, and then on the slide, select all 20 rectangles. In the Custom Animation task pane, do the following: Click Add Effect , point to Exit , and then click More Effects . In the Add Exit Effect dialog box, under Subtle , click Contract , and then click OK . Under Modify: Contract , in the Start list, select With Previous . Under Modify: Contract , in the Speed list, select Fast . Also in the Custom Animation task pane, do the following: Select the first animation effect. Click the arrow to the right of the effect, and then click Timing . In the Contract dialog box, on the Timing tab, in the Delay box, enter 0.5 . Select the second animation effect. Click the arrow to the right of the effect, and then click Timing . In the Contract dialog box, on the Timing tab, in the Delay box, enter 0.6 . Select the third animation effect. Click the arrow to the right of the effect, and then click Timing . In the Contract dialog box, on the Timing tab, in the Delay box, enter 0.7 . Select the fourth animation effect. Click the arrow to the right of the effect, and then click Timing . In the Contract dialog box, on the Timing tab, in the Delay box, enter 0.8 . Select the fifth animation effect. Click the arrow to the right of the effect, and then click Timing . In the Contract dialog box, on the Timing tab, in the Delay box, enter 0.9 . Select the sixth animation effect. Click the arrow to the right of the effect, and then click Timing . In the Contract dialog box, on the Timing tab, in the Delay box, enter 1.0 . Select the seventh animation effect. Click the arrow to the right of the effect, and then click Timing . In the Contract dialog box, on the Timing tab, in the Delay box, enter 1.1 . Select the eighth animation effect. Click the arrow to the right of the effect, and then click Timing . In the Contract dialog box, on the Timing tab, in the Delay box, enter 1.2 . Select the ninth animation effect. Click the arrow to the right of the effect, and then click Timing . In the Contract dialog box, on the Timing tab, in the Delay box, enter 1.3 . Select the 10 th animation effect. Click the arrow to the right of the effect, and then click Timing . In the Contract dialog box, on the Timing tab, in the Delay box, enter 1.4 . Select the 11 th animation effect. Click the arrow to the right of the effect, and then click Timing . In the Contract dialog box, on the Timing tab, in the Delay box, enter 1.5 . Select the 12 th animation effect. Click the arrow to the right of the effect, and then click Timing . In the Contract dialog box, on the Timing tab, in the Delay box, enter 1.6 . Select the 13 th animation effect. Click the arrow to the right of the effect, and then click Timing . In the Contract dialog box, on the Timing tab, in the Delay box, enter 1.7 . Select the 14 th animation effect. Click the arrow to the right of the effect, and then click Timing . In the Contract dialog box, on the Timing tab, in the Delay box, enter 1.8 . Select the 15 th animation effect. Click the arrow to the right of the effect, and then click Timing . In the Contract dialog box, on the Timing tab, in the Delay box, enter 1.9 . Select the 16 th animation effect. Click the arrow to the right of the effect, and then click Timing . In the Contract dialog box, on the Timing tab, in the Delay box, enter 2.0 . Select the 17 th animation effect. Click the arrow to the right of the effect, and then click Timing . In the Contract dialog box, on the Timing tab, in the Delay box, enter 2.1 . Select the 18 th animation effect. Click the arrow to the right of the effect, and then click Timing . In the Contract dialog box, on the Timing tab, in the Delay box, enter 2.2 . Select the 19 th animation effect. Click the arrow to the right of the effect, and then click Timing . In the Contract dialog box, on the Timing tab, in the Delay box, enter 2.3 . Select the 20 th animation effect. Click the arrow to the right of the effect, and then click Timing . In the Contract dialog box, on the Timing tab, in the Delay box, enter 2.4 .
  • Custom animation effects: floating petals (Difficult) Tip : For best results with the animation effects on this slide, choose a picture with an object that is made up of multiple parts, like the flower in this example. To reproduce the background effects on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . Right-click the slide and then click Format Background . In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill , and then under Insert from , click File . In the Insert Picture dialog box, select a picture, and then click Insert . On the Home tab, in the Drawing group, click Shapes , and then under Rectangles , click Rectangle (first option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools , on the Format tab, in the Size group, do the following: In the Shape Height box, enter 7.5” . In the Shape Width box, enter 10” . On the Home tab, in the Drawing group, click the arrow next to Shape Outline , and then click No Outline . On the Home tab, in the Drawing group, click the arrow next to Shape Fill , point to Gradient , and then click More Gradients . In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Gradient fill , and then do the following: In the Type list, select Radial . Click the button next to Direction , and then click From Center (third option from the left). Under Gradient stops , click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops , customize the gradient stops that you added as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 0% . Click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 5% (sixth row, second option from the left). In the Transparency box, enter 40% . Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100% . Click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 5% (sixth row, second option from the left). In the Transparency box, enter 10% . Select the rectangle. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align Middle . Click Align Center . To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes , and then under Lines , click Freeform (11 th option from the left). On the slide, click points to trace an outline around a shape on the background picture (in the example above, one of the flower petals). Right-click the freeform shape and click Edit Points . To make the freeform shape more similar to the shape on the picture, right-click a place to include another point, and click Add Points . Drag the new point to follow the contour of the shape on the picture. To outline rounded edges of the shape on the picture, right-click a straight line segment, and click Curved Segment . Select the freeform shape. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and then in the Line Color pane, select No line . Also in the Format Shape dialog box, click Fill in the left pane, and then in the Fill pane, select Slide background fill . Repeat the process in steps 1-5 to create six full-color shapes on the slide (in the example above, six flower petals from the same flower). To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation . On the slide, select the rectangle. In the Custom Animation task pane, do the following: Click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Subtle , click Fade , and then click OK . Under Modify: Fade , in the Start list, select After Previous . Under Modify: Fade , in the Speed list, select Medium . On the Home tab, in the Editing group, click Select , and then click Selection Pane . In the Selection and Visibility pane, press and hold CTRL and select all of the freeform shapes. In the Custom Animation task pane, do the following: Click Add Effect , point to Emphasis , and then click More Effects . In the Add Emphasis Effect dialog box, under Basic , click Spin , and then click OK . Press and hold CTRL and select all of the freeform spin effects. Under Modify: Spin , in the Start list, select With Previous . Under Modify: Spin , in the Speed list, select Medium . Also in the Custom Animation task pane, do the following to edit each freeform shape spin effect: Select the first freeform shape spin effect, and then do the following: Under Modify: Spin , in the Start list, select After Previous . Under Modify: Spin , in the Amount list, in the Custom box, enter 360⁰ , and then press ENTER. Also in the Amount list, click Counterclockwise . Select the second freeform shape spin effect, and then do the following: Under Modify: Spin , in the Amount list, in the Custom box, enter 30⁰ , and then press ENTER. Also in the Amount list, click Clockwise . Right-click the freeform shape spin effect, and then click Timing . In the Spin dialog box, on the Timing tab, in the Delay box, enter 0.3 . Select the third freeform shape spin effect, and then do the following: Under Modify: Spin , in the Amount list, in the Custom box, enter 40⁰ , and then press ENTER. Also in the Amount list, click Clockwise . Right-click the freeform shape spin effect, and then click Timing . In the Spin dialog box, on the Timing tab, in the Delay box, enter 0.3 . Select the fourth freeform shape spin effect, and then do the following: Under Modify: Spin , in the Amount list, in the Custom box, enter 90⁰ , and then press ENTER. Also in the Amount list, click Counterclockwise . Right-click the freeform shape spin effect, and then click Timing . In the Spin dialog box, on the Timing tab, in the Delay box, enter 0.4 . Select the fifth freeform shape spin effect, and then do the following: Under Modify: Spin , in the Amount list, in the Custom box, enter 90⁰ , and then press ENTER. Also in the Amount list, click Clockwise . Right-click the freeform shape spin effect, and then click Timing . In the Spin dialog box, on the Timing tab, in the Delay box, enter 0.5 . Select the sixth freeform shape spin effect, and then do the following: Under Modify: Spin , in the Amount list, in the Custom box, enter 360⁰ , and then press ENTER. Also in the Amount list, click Clockwise . Right-click the freeform shape spin effect, and then click Timing . In the Spin dialog box, on the Timing tab, in the Delay box, enter 0.6 . In the Selection and Visibility pane, press and hold CTRL and select all of the freeform shapes. In the Custom Animation task pane, do the following: Click Add Effect , point to Emphasis , and then click More Effects . In the Add Emphasis Effect dialog box, under Basic , click Grow/Shrink , and then click OK . Press and hold CTRL and select all of the grow/shrink effects (the final six effects in the list). Under Modify: Grow/Shrink , in the Start list, select With Previous . Under Modify: Grow/Shrink , in the Speed list, select Medium . Also in the Custom Animation task pane, do the following to edit each freeform shape grow/shrink effect: Select the first freeform shape grow/shrink effect, and then do the following: Under Modify: Grow/Shrink , in the Size list , in the Custom box, enter 40% , and then press ENTER. Also in the Size list, click Vertical . In the pane, drag the effect until it is third in the list of effects. Select the second freeform shape grow/shrink effect, and then do the following: Under Modify: Grow/Shrink , in the Size list, in the Custom box, enter 50% , and then press ENTER. Also in the Size list, click Horizontal . In the pane, drag the effect until it is fifth in the list of effects. Select the third freeform shape grow/shrink effect, and then do the following: Under Modify: Grow/Shrink , in the Size list, in the Custom box, enter 50% , and then press ENTER. Also in the Size list, click Horizontal . In the pane, drag the effect until it is seventh in the list of effects. Select the fourth freeform shape grow/shrink effect, and then do the following: Under Modify: Grow/Shrink , in the Size list, in the Custom box, enter 40% , and then press ENTER. Also in the Size list, click Vertical . In the pane, drag the effect until it is ninth in the list of effects. Select the fifth freeform shape grow/shrink effect, and then do the following: Under Modify: Grow/Shrink , in the Size list, in the Custom box, enter 50% , and then press ENTER. Also in the Size list, click Horizontal . In the pane, drag the effect until it is 11th in the list of effects. Select the sixth freeform shape grow/shrink effect, and then do the following: Under Modify: Grow/Shrink , in the Size list, in the Custom box, enter 50% , and then press ENTER. Also in the Size list, click Horizontal . In the pane, drag the effect until it is 13th in the list of effects. In the Selection and Visibility pane, press and hold CTRL and select all of the freeform shapes. In the Custom Animation task pane, click Add effect , point to Motion Path , point to Draw Custom Motion Path , and then click Curve . On the slide, click five points to create a simple curved motion path, starting on the group of freeform shapes and ending off the right side of the slide. Double-click the final point to accept the motion path. In the Custom Animation task pane, do the following: Press and hold CTRL and select all of the freeform shape custom path effects (the final six effects in the list). Under Modify: Custom Path , in the Start list, select With Previous . Under Modify: Custom Path , in the Speed list, select Medium . Also in the Custom Animation task pane, do the following: Drag the first custom path effect until it is fourth in the list of effects. Drag the second custom path effect until it is seventh in the list of effects. Drag the third custom path effect until it is 10th in the list of effects. Drag the fourth custom path effect until it is 13th in the list of effects. Drag the fifth custom path effect until it is 16th in the list of effects. Drag the sixth custom path effect until it is 19th in the list of effects.
  • For reproduction steps for this slide, refer to the PowerPoint template titled “Static text effects for PowerPoint slides” (STATIC_TEXT.potx), slide number 17.
  • Scoala"Dimitrie Anghel"

    1. 1. Miresme dulci de flori mă-mbată şi mă alintă gînduri blînde... Ce iertător şi bun ţi-e gîndul, în preajma florilor plămînde ! Rîd în grămadă ; flori de nalbă şi albe flori de mărgărint, De parc-ar fi căzut pe straturi un stol de fluturi de argint.
    2. 2. <ul><li>Satul Corneşti este aşezat astăzi pe valea a două dealuri, spre vest de oraşul Iaşi, la distanţa de 10 km, depărtare </li></ul><ul><li>A luat fiinţă la începutul secolului al XIX-lea, prin aducerea unui grup de oameni clăcaşi, originari din Italia, de către Dimitrie Anghel, tatăl scriitorului, pentru a face munci agricole mai sistematice pe moşia sa de la Corneşti </li></ul><ul><li>De la aceşti clăcaşi a rămas numele de dealul « talienilor » care se află la marginea satului Corneşti </li></ul>
    3. 3. <ul><li>În acest sat a fost zidită din temelie biserica «  Buna vestire », în anul 1833, din piatră şi cărămidă, de către arhiepiscopul Filaret Beldiman, cu sprijinul lui Constantin Anghel, bunicul scriitorului </li></ul><ul><li>Şcoala “Dimitrie Anghel’”Corneşti a fost construită în anul 1872 din dorinţa boierului Constantin Anghel şi dată în folosinţă în 1879 fiind a doua şcoală înfiinţată din comună </li></ul>
    4. 4. DIMITRIE ANGHEL POETUL FLORILOR POETUL UITAT (1872-1914)
    5. 5. CASA PĂRINTEASCĂ <ul><li>Conacul datează din secolul al XIX-lea, fiind construit în anul 1840 de către familia boierească Beldiman, în spatele bisericii din sat . Ulterior a aparţinut lui Dimitrie Anghel (n. 1833), tatăl poetului , care a modernizat activităţile agricole de pe moşia sa . </li></ul><ul><li>În această casă s-a născut la data de 16 iulie 1872 Dimitrie Anghel, &quot;poetul florilor&quot;. El a trăit primii ani ai copilăriei la conacul părintesc, înconjurat de o grădină plină de flori . </li></ul>
    6. 6. Muzeul <ul><li>În anul 1971, a fost amenajat un muzeu ce aparţinea de Muzeul Literaturii Române din Iaşi. Aici erau expuse manuscrise, reviste, ediţii de poezii, fotocopii, cărţile poetului Dimitrie Anghel (1872-1914). În perioada comunistă, Casa memorială Dimitrie Anghel de la Corneşti figura pe hărţile turistice ca un important loc de vizitat din afara municipiului Iaşi </li></ul><ul><li>C onacul Anghel era o casă frumoasă, cu o grădină plină de flori, o livadă de pruni, cu un beci de câţiva zeci de metri lungime, hambare, grajduri mari în partea din spate, velniţe de rachiu etc. Aici s-au ţinut şi baluri . </li></ul><ul><li>După Revoluţia din decembrie 1989, Casa memorială Dimitrie Anghel de la Corneşti a fost închisă temporar pentru restaurare. Ea a fost demolată însă de către locuitorii din sat </li></ul>
    7. 7. <ul><li>S ensibilitate a aleasă i-a fost transmisă de mama sa, Erifilia, născută la Constantinopol, la 10 octombrie 1845 şi crescută pe insula Prinkipo din Marea Marmara, avea ceva din firea femeii modelate în mijlocul naturii exuberante a Bosforului, din zbuciumul tainic al mării şi farmecul Orientului, care îşi alina nostalgia în peisajul pitoresc al Corneştilor </li></ul><ul><li>Ea s-a ocupat de educaţia micului Mitif şi care a frecventat mai întâi cursurile şcolii din Corneşti, construit ă de bunicul său </li></ul>
    8. 8. <ul><li>Debutează cu poezii în revista Contemporanul (1890), colaborând apoi, cu poezie şi publicistică, la Adevărul , Adevărul literar şi artistic , Lumea nouă , Literatură şi artă română , Pagini literare , Viaţa românească etc. A făcut parte din redacţia şi din comitetul de direcţie al revistei Sămănătorul (1906 - 1908). A editat revista Cumpăna , împreună cu M. Sadoveanu, Şt. O. Iosif şi Ilarie Chendi (1909 - 1910). A debutat editorial cu Traduceri din Paul Verlaine în 1903. În 1905 a publicat volumul de versuri În grădină , urmat, în 1909, de Fantazii . Între timp au apărut operele scrise de D. Anghel în colaborare cu Şt. O. Iosif: Legenda funigeilor (poem dramatic, 1907), Cometa (comedie, 1908), Caleidoscopul lui A. Mirea (1908), Carmen saeculare (poem istoric, 1909), iar în 1910, Cireşul lui Lucullus (proză). </li></ul><ul><li>A călătorit în Italia, Franţa, Elveţia şi Spania, revenind în ţară în 1902. A fost funcţionar în Dobrogea (1906 - 1907), referent la Casa Şcoalelor şi inspector al Ministerului Cultelor şi Instrucţiunii Publice (din 1911). </li></ul>
    9. 9. <ul><li>Casnicia lui Şt.O.Iosif cu Natalia Negru , deşi fericită la început, a alunecat treptat-treptat către un şir de neîntelegeri, spre a sfârşi, peste numai câţiva ani, printr-un divorţ. Poate cel mai important rezultat al iubirii dintre cei doi a fost fiica lor, Corina, pierita şi ea tragic în timpul bombardamentului unui Zepelin german, la 13 septembrie 1916. </li></ul><ul><li>În 1901, Ştefan Octavian Iosif şi Dimitrie Anghel se aflau la studii la Paris. Deşi aveau temperamente total diferite, existau şi câteva trăsături care îi uneau: amândoi erau poe ţ i nutrind o mare sete de instruire şi afirmare literară şi amândoi erau - structural vorbind - nişte visători şi nişte romantici </li></ul>
    10. 10. Fire visătoare şi boemă, Iosif nu fusese, însă, ceea ce îşi dorise Natalia Negru pentru propria-i căsnicie: un tip aşezat şi pragmatic.De aceea ea divorţează de acesta şi se căsătoreşte cu Dimitrie Anghel, decizie fatală pentru toţi cei implicaţi, şi în urma căreia şi-au găsit sfârşitul cei doi mari poeţi .
    11. 11. PORTRETE DE FAMILIE
    12. 14. S -a stins la Iaşi, la 13 noiembrie 1914
    13. 15. Atîtea amintiri uitate cad abătute de-o mireasmă : Parcă-mi arunc-o floare roşă o mînă albă de fantasmă, Ş-un chip bălan lîngă-o fereastră răsare-n fulger şi se stînge... De-atuncea mi-a rămas garoafa pe suflet ca un strop de sînge.

    ×